Tommaso D'Antino
- (2023): Influence of severe thermal preconditioning on the bond between carbon FRCM and masonry substrate: Effect of textile pre-impregnation. In: Construction and Building Materials, v. 409 (December 2023).
- (2023): Experimental and numerical analysis of CFRP-concrete joint bond behavior after exposure to wet-dry cycles. In: Composite Structures, v. 303 (January 2023).
- (2023): Analytical study of the bond behavior of fiber reinforced cementitious matrix (FRCM)-substrate joints based on a two-stage nonlinear cohesive material law. In: Composite Structures, v. 304 (January 2023).
- (2023): Experimental and numerical investigation on the tensile behavior of PBO FRCM composites with textile lap splice. In: Construction and Building Materials, v. 363 (January 2023).
- (2022): Effect of bonded length on the load response and failure mode of pull-out tests of GFRP bars embedded in concrete. In: Construction and Building Materials, v. 347 (September 2022).
- (2022): Fatigue tensile testing of glass fiber-reinforced polymer reinforcing bars. In: Construction and Building Materials, v. 346 (September 2022).
- (2022): A new predictive model for FRCM-confined columns: A reflection on the composite behavior at peak stress. In: Construction and Building Materials, v. 337 (June 2022).
- (2021): Review on the bond behavior and durability of FRP bars to concrete. In: Construction and Building Materials, v. 287 (June 2021).
- (2021): Influence of different set-up parameters on the bond behavior of FRCM composites. In: Construction and Building Materials, v. 308 (November 2021).
- (2021): Investigation of the bond behavior of the fiber reinforced composite-concrete interface using the finite difference method (FDM). In: Composite Structures, v. 278 (December 2021).
- (2021): Experimental and analytical investigation of PBO FRCM-concrete bond behavior using direct and indirect shear test set-ups. In: Composite Structures, v. 267 (July 2021).
- (2019): Durability of glass FRP reinforcing bars: a state of the art. Presented at: IABSE Symposium: Towards a Resilient Built Environment Risk and Asset Management, Guimarães, Portugal, 27-29 March 2019.
- (2020): Study of the influence of interface normal stresses on the bond behavior of FRCM composites using direct shear and modified beam tests. In: Construction and Building Materials, v. 262 (November 2020).
- (2020): The role of the fiber–matrix interfacial properties on the tensile behavior of FRCM coupons. In: Construction and Building Materials, v. 265 (December 2020).
- (2020): Full-range behavior of fiber reinforced cementitious matrix (FRCM)-concrete joints using a trilinear bond-slip relationship. In: Composite Structures, v. 239 (May 2020).
- (2020): Influence of hygrothermal ageing on the mechanical properties of CFRP-concrete joints and of their components. In: Composite Structures, v. 238 (April 2020).
- (2019): Long-term behavior of GFRP reinforcing bars. In: Composite Structures, v. 227 (November 2019).
- (2019): Analytical assessment of the stress-transfer mechanism in FRCM composites. In: Composite Structures, v. 220 (July 2019).
- (2018): Estimation of a matrix-fiber interface cohesive material law in FRCM-concrete joints. In: Composite Structures, v. 193 (June 2018).
- (2016): Effect of the inherent eccentricity in single-lap direct-shear tests of PBO FRCM-concrete joints. In: Composite Structures, v. 142 (May 2016).
- (2020): General Analytical Model for the Bond Capacity of NSM FRP-Concrete Joints. In: Journal of Composites for Construction, v. 24, n. 6 (December 2020).
- (2020): Experimental procedures for the mechanical characterization of composite reinforced mortar (CRM) systems for retrofitting of masonry structures. In: Materials and Structures, v. 53, n. 4 (26 June 2020).
- (2020): Advances in Knowledge of the Fracture Properties of Cohesive Materials: Fired-Clay and Tuff Bricks. In: Journal of Engineering Mechanics (ASCE), v. 146, n. 8 (August 2020).
- (2020): Relationship between the effective strain of PBO FRCM-strengthened RC beams and the debonding strain of direct shear tests. In: Engineering Structures, v. 216 (August 2020).
- (2020): Lessons Learned on the Tensile and Bond Behavior of Fabric Reinforced Cementitious Matrix (FRCM) Composites. In: Frontiers in Built Environment, v. 6 (January 2020).
- (2020): Shear Strength Model for RC Beams with U-Wrapped FRCM Composites. In: Journal of Composites for Construction, v. 24, n. 1 (February 2020).
- (2019): Analytical Bond-Slip Model for Fiber-Reinforced Cementitious Matrix-Concrete Joints Based on Strain Measurements. In: Journal of Materials in Civil Engineering (ASCE), v. 31, n. 11 (November 2019).
- (2015): Influence of the substrate characteristics on the bond behavior of PBO FRCM-concrete joints. In: Construction and Building Materials, v. 101 (December 2015).
- (2018): Intermediate crack induced debonding in steel beams reinforced with CFRP plates under fatigue loading. In: Engineering Structures, v. 171 (September 2018).
- (2016): Accuracy of design-oriented formulations for evaluating the flexural and shear capacities of FRP-strengthened RC beams. In: Structural Concrete, v. 17, n. 3 (June 2016).
Structurae cooperates with
