0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Tommaso D'Antino

Die folgende Bibliografie enthält alle in dieser Datenbank indizierten Veröffentlichungen, die mit diesem Namen als Autor, Herausgeber oder anderweitig Beitragenden verbunden sind.

  1. Calabrese, Angelo Savio / Colombi, Pierluigi / D'Antino, Tommaso (2024): Fatigue and post-fatigue behavior of FRCM-concrete specimens under direct shear and bending conditions. In: Composite Structures, v. 341 (August 2024).

    https://doi.org/10.1016/j.compstruct.2024.118129

  2. Bertolli, Veronica / Signorini, Cesare / Nobili, Andrea / D'Antino, Tommaso (2023): Influence of severe thermal preconditioning on the bond between carbon FRCM and masonry substrate: Effect of textile pre-impregnation. In: Construction and Building Materials, v. 409 (Dezember 2023).

    https://doi.org/10.1016/j.conbuildmat.2023.134028

  3. Al-Lami, Karrar / Colombi, Pierluigi / D'Antino, Tommaso (2023): Experimental and numerical analysis of CFRP-concrete joint bond behavior after exposure to wet-dry cycles. In: Composite Structures, v. 303 (Januar 2023).

    https://doi.org/10.1016/j.compstruct.2022.116273

  4. Zou, Xingxing / D'Antino, Tommaso / Sneed, Lesley H. (2023): Analytical study of the bond behavior of fiber reinforced cementitious matrix (FRCM)-substrate joints based on a two-stage nonlinear cohesive material law. In: Composite Structures, v. 304 (Januar 2023).

    https://doi.org/10.1016/j.compstruct.2022.116457

  5. D'Antino, Tommaso / Calabrese, Angelo Savio / Colombi, Pierluigi / Poggi, Carlo (2023): Experimental and numerical investigation on the tensile behavior of PBO FRCM composites with textile lap splice. In: Construction and Building Materials, v. 363 (Januar 2023).

    https://doi.org/10.1016/j.conbuildmat.2022.129437

  6. Zhao, Xudong / Minhajur Rahman, Mohammod / D'Antino, Tommaso / Focacci, Francesco / Carloni, Christian (2022): Effect of bonded length on the load response and failure mode of pull-out tests of GFRP bars embedded in concrete. In: Construction and Building Materials, v. 347 (September 2022).

    https://doi.org/10.1016/j.conbuildmat.2022.128425

  7. D'Antino, Tommaso / Pisani, Marco A. / Poggi, Carlo (2022): Fatigue tensile testing of glass fiber-reinforced polymer reinforcing bars. In: Construction and Building Materials, v. 346 (September 2022).

    https://doi.org/10.1016/j.conbuildmat.2022.128395

  8. Ameli, Zahra / D'Antino, Tommaso / Carloni, Christian (2022): A new predictive model for FRCM-confined columns: A reflection on the composite behavior at peak stress. In: Construction and Building Materials, v. 337 (Juni 2022).

    https://doi.org/10.1016/j.conbuildmat.2022.127534

  9. Nepomuceno, Eduarda / Sena-Cruz, José / Correia, Luís / D'Antino, Tommaso (2021): Review on the bond behavior and durability of FRP bars to concrete. In: Construction and Building Materials, v. 287 (Juni 2021).

    https://doi.org/10.1016/j.conbuildmat.2021.123042

  10. Bellini, Alessandro / Aiello, Maria Antonietta / Bencardino, Francesco / de Carvalho Bello, Claudia Brito / Castori, Giulio / Cecchi, Antonella / Ceroni, Francesca / Corradi, Marco / D'Antino, Tommaso / De Santis, Stefano / Fagone, Mario / de Felice, Gianmarco / Leone, Marianovella / Lignola, Gian Piero / Napoli, Annalisa / Nisticò, Mattia / Poggi, Carlo / Prota, Andrea / Ranocchiai, Giovanna / Realfonzo, Roberto / Sacco, Elio / Mazzotti, Claudio (2021): Influence of different set-up parameters on the bond behavior of FRCM composites. In: Construction and Building Materials, v. 308 (November 2021).

    https://doi.org/10.1016/j.conbuildmat.2021.124964

  11. Zou, Xingxing / D'Antino, Tommaso / Sneed, Lesley H. (2021): Investigation of the bond behavior of the fiber reinforced composite-concrete interface using the finite difference method (FDM). In: Composite Structures, v. 278 (Dezember 2021).

    https://doi.org/10.1016/j.compstruct.2021.114643

  12. Calabrese, Angelo Savio / D'Antino, Tommaso / Colombi, Pierluigi (2021): Experimental and analytical investigation of PBO FRCM-concrete bond behavior using direct and indirect shear test set-ups. In: Composite Structures, v. 267 (Juli 2021).

    https://doi.org/10.1016/j.compstruct.2021.113672

  13. D'Antino, Tommaso / Pisani, Marco A. (2019): Durability of glass FRP reinforcing bars: a state of the art. Vorgetragen bei: IABSE Symposium: Towards a Resilient Built Environment Risk and Asset Management, Guimarães, Portugal, 27-29 March 2019.

    https://doi.org/10.2749/guimaraes.2019.0611

  14. Focacci, Francesco / D'Antino, Tommaso / Carloni, Christian (2020): The role of the fiber–matrix interfacial properties on the tensile behavior of FRCM coupons. In: Construction and Building Materials, v. 265 (Dezember 2020).

    https://doi.org/10.1016/j.conbuildmat.2020.120263

  15. Zou, Xingxing / Sneed, Lesley H. / D'Antino, Tommaso (2020): Full-range behavior of fiber reinforced cementitious matrix (FRCM)-concrete joints using a trilinear bond-slip relationship. In: Composite Structures, v. 239 (Mai 2020).

    https://doi.org/10.1016/j.compstruct.2020.112024

  16. Al-Lami, Karrar / Colombi, Pierluigi / D'Antino, Tommaso (2020): Influence of hygrothermal ageing on the mechanical properties of CFRP-concrete joints and of their components. In: Composite Structures, v. 238 (April 2020).

    https://doi.org/10.1016/j.compstruct.2020.111947

  17. D'Antino, Tommaso / Pisani, Marco A. (2019): Long-term behavior of GFRP reinforcing bars. In: Composite Structures, v. 227 (November 2019).

    https://doi.org/10.1016/j.compstruct.2019.111283

  18. Colombi, Pierluigi / D'Antino, Tommaso (2019): Analytical assessment of the stress-transfer mechanism in FRCM composites. In: Composite Structures, v. 220 (Juli 2019).

    https://doi.org/10.1016/j.compstruct.2019.03.074

  19. D'Antino, Tommaso / Colombi, Pierluigi / Carloni, Christian / Sneed, Lesley H. (2018): Estimation of a matrix-fiber interface cohesive material law in FRCM-concrete joints. In: Composite Structures, v. 193 (Juni 2018).

    https://doi.org/10.1016/j.compstruct.2018.03.005

  20. D'Antino, Tommaso / Sneed, Lesley H. / Carloni, Christian / Pellegrino, Carlo (2016): Effect of the inherent eccentricity in single-lap direct-shear tests of PBO FRCM-concrete joints. In: Composite Structures, v. 142 (Mai 2016).

    https://doi.org/10.1016/j.compstruct.2016.01.076

  21. D'Antino, Tommaso / Pisani, Marco Andrea (2020): General Analytical Model for the Bond Capacity of NSM FRP-Concrete Joints. In: Journal of Composites for Construction, v. 24, n. 6 (Dezember 2020).

    https://doi.org/10.1061/(asce)cc.1943-5614.0001076

  22. D'Antino, Tommaso / Calabrese, Angelo Savio / Poggi, Carlo (2020): Experimental procedures for the mechanical characterization of composite reinforced mortar (CRM) systems for retrofitting of masonry structures. In: Materials and Structures, v. 53, n. 4 (26 Juni 2020).

    https://doi.org/10.1617/s11527-020-01529-1

  23. D'Antino, Tommaso / Santandrea, Mattia / Carloni, Christian (2020): Advances in Knowledge of the Fracture Properties of Cohesive Materials: Fired-Clay and Tuff Bricks. In: Journal of Engineering Mechanics (ASCE), v. 146, n. 8 (August 2020).

    https://doi.org/10.1061/(asce)em.1943-7889.0001815

  24. D'Antino, Tommaso / Focacci, Francesco / Sneed, Lesley H. / Carloni, Christian (2020): Relationship between the effective strain of PBO FRCM-strengthened RC beams and the debonding strain of direct shear tests. In: Engineering Structures, v. 216 (August 2020).

    https://doi.org/10.1016/j.engstruct.2020.110631

  25. de Felice, Gianmarco / D'Antino, Tommaso / De Santis, Stefano / Meriggi, Pietro / Roscini, Francesca (2020): Lessons Learned on the Tensile and Bond Behavior of Fabric Reinforced Cementitious Matrix (FRCM) Composites. In: Frontiers in Built Environment, v. 6 (Januar 2020).

    https://doi.org/10.3389/fbuil.2020.00005

  26. D'Antino, Tommaso / Focacci, Francesco / Sneed, Lesley H. / Pellegrino, Carlo (2020): Shear Strength Model for RC Beams with U-Wrapped FRCM Composites. In: Journal of Composites for Construction, v. 24, n. 1 (Februar 2020).

    https://doi.org/10.1061/(asce)cc.1943-5614.0000986

  27. Zou, Xingxing / Sneed, Lesley H. / D'Antino, Tommaso / Carloni, Christian (2019): Analytical Bond-Slip Model for Fiber-Reinforced Cementitious Matrix-Concrete Joints Based on Strain Measurements. In: Journal of Materials in Civil Engineering (ASCE), v. 31, n. 11 (November 2019).

    https://doi.org/10.1061/(asce)mt.1943-5533.0002855

  28. D'Antino, Tommaso / Sneed, Lesley H. / Carloni, Christian / Pellegrino, Carlo (2015): Influence of the substrate characteristics on the bond behavior of PBO FRCM-concrete joints. In: Construction and Building Materials, v. 101 (Dezember 2015).

    https://doi.org/10.1016/j.conbuildmat.2015.10.045

  29. Bocciarelli, Massimiliano / Colombi, Pierluigi / D'Antino, Tommaso / Fava, Giulia (2018): Intermediate crack induced debonding in steel beams reinforced with CFRP plates under fatigue loading. In: Engineering Structures, v. 171 (September 2018).

    https://doi.org/10.1016/j.engstruct.2018.04.002

  30. D'Antino, Tommaso / Triantafillou, Thanasis C. (2016): Accuracy of design-oriented formulations for evaluating the flexural and shear capacities of FRP-strengthened RC beams. In: Structural Concrete, v. 17, n. 3 (Juni 2016).

    https://doi.org/10.1002/suco.201500066

Eine Veröffentlichung suchen...

Nur verfügbar mit
Mein Structurae

Volltext
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine