Tommaso D'Antino
- (2023): Influence of severe thermal preconditioning on the bond between carbon FRCM and masonry substrate: Effect of textile pre-impregnation. Dans: Construction and Building Materials, v. 409 (décembre 2023).
- (2023): Experimental and numerical analysis of CFRP-concrete joint bond behavior after exposure to wet-dry cycles. Dans: Composite Structures, v. 303 (janvier 2023).
- (2023): Analytical study of the bond behavior of fiber reinforced cementitious matrix (FRCM)-substrate joints based on a two-stage nonlinear cohesive material law. Dans: Composite Structures, v. 304 (janvier 2023).
- (2023): Experimental and numerical investigation on the tensile behavior of PBO FRCM composites with textile lap splice. Dans: Construction and Building Materials, v. 363 (janvier 2023).
- (2022): Effect of bonded length on the load response and failure mode of pull-out tests of GFRP bars embedded in concrete. Dans: Construction and Building Materials, v. 347 (septembre 2022).
- (2022): Fatigue tensile testing of glass fiber-reinforced polymer reinforcing bars. Dans: Construction and Building Materials, v. 346 (septembre 2022).
- (2022): A new predictive model for FRCM-confined columns: A reflection on the composite behavior at peak stress. Dans: Construction and Building Materials, v. 337 (juin 2022).
- (2021): Review on the bond behavior and durability of FRP bars to concrete. Dans: Construction and Building Materials, v. 287 (juin 2021).
- (2021): Influence of different set-up parameters on the bond behavior of FRCM composites. Dans: Construction and Building Materials, v. 308 (novembre 2021).
- (2021): Investigation of the bond behavior of the fiber reinforced composite-concrete interface using the finite difference method (FDM). Dans: Composite Structures, v. 278 (décembre 2021).
- (2021): Experimental and analytical investigation of PBO FRCM-concrete bond behavior using direct and indirect shear test set-ups. Dans: Composite Structures, v. 267 (juillet 2021).
- (2019): Durability of glass FRP reinforcing bars: a state of the art. Présenté pendant: IABSE Symposium: Towards a Resilient Built Environment Risk and Asset Management, Guimarães, Portugal, 27-29 March 2019.
- (2020): Study of the influence of interface normal stresses on the bond behavior of FRCM composites using direct shear and modified beam tests. Dans: Construction and Building Materials, v. 262 (novembre 2020).
- (2020): The role of the fiber–matrix interfacial properties on the tensile behavior of FRCM coupons. Dans: Construction and Building Materials, v. 265 (décembre 2020).
- (2020): Full-range behavior of fiber reinforced cementitious matrix (FRCM)-concrete joints using a trilinear bond-slip relationship. Dans: Composite Structures, v. 239 (mai 2020).
- (2020): Influence of hygrothermal ageing on the mechanical properties of CFRP-concrete joints and of their components. Dans: Composite Structures, v. 238 (avril 2020).
- (2019): Long-term behavior of GFRP reinforcing bars. Dans: Composite Structures, v. 227 (novembre 2019).
- (2019): Analytical assessment of the stress-transfer mechanism in FRCM composites. Dans: Composite Structures, v. 220 (juillet 2019).
- (2018): Estimation of a matrix-fiber interface cohesive material law in FRCM-concrete joints. Dans: Composite Structures, v. 193 (juin 2018).
- (2016): Effect of the inherent eccentricity in single-lap direct-shear tests of PBO FRCM-concrete joints. Dans: Composite Structures, v. 142 (mai 2016).
- (2020): General Analytical Model for the Bond Capacity of NSM FRP-Concrete Joints. Dans: Journal of Composites for Construction, v. 24, n. 6 (décembre 2020).
- (2020): Experimental procedures for the mechanical characterization of composite reinforced mortar (CRM) systems for retrofitting of masonry structures. Dans: Materials and Structures, v. 53, n. 4 (26 juin 2020).
- (2020): Advances in Knowledge of the Fracture Properties of Cohesive Materials: Fired-Clay and Tuff Bricks. Dans: Journal of Engineering Mechanics (ASCE), v. 146, n. 8 (août 2020).
- (2020): Relationship between the effective strain of PBO FRCM-strengthened RC beams and the debonding strain of direct shear tests. Dans: Engineering Structures, v. 216 (août 2020).
- (2020): Lessons Learned on the Tensile and Bond Behavior of Fabric Reinforced Cementitious Matrix (FRCM) Composites. Dans: Frontiers in Built Environment, v. 6 (janvier 2020).
- (2020): Shear Strength Model for RC Beams with U-Wrapped FRCM Composites. Dans: Journal of Composites for Construction, v. 24, n. 1 (février 2020).
- (2019): Analytical Bond-Slip Model for Fiber-Reinforced Cementitious Matrix-Concrete Joints Based on Strain Measurements. Dans: Journal of Materials in Civil Engineering (ASCE), v. 31, n. 11 (novembre 2019).
- (2015): Influence of the substrate characteristics on the bond behavior of PBO FRCM-concrete joints. Dans: Construction and Building Materials, v. 101 (décembre 2015).
- (2018): Intermediate crack induced debonding in steel beams reinforced with CFRP plates under fatigue loading. Dans: Engineering Structures, v. 171 (septembre 2018).
- (2016): Accuracy of design-oriented formulations for evaluating the flexural and shear capacities of FRP-strengthened RC beams. Dans: Structural Concrete, v. 17, n. 3 (juin 2016).
Structurae coopère avec
