Structures - December 2022

Published:	December 2022

Articles in this Issue

Author(s)	Title	Page(s)
George, Jofin / Menon, Arun	Analytical fragility curves for displacement-based scour assessment of masonry arch bridges	172-185
Nanda, Radhikesh P. / Damarla, Rithwez / Nayak, Kumbla Anupa	Android application of rapid visual screening for buildings in Indian context	1823-1836
Ren, Yuan / Ye, Qiaowei / Xu, Xiang / Huang, Qiao / Fan, Ziyuan / Li, Chong / Chang, Weijie	An anomaly pattern detection for bridge structural response considering time-varying temperature coefficients	285-298
Wang, Zeqiang / Han, Qinghua / Lu, Yan / Hu, Yang	Anti-slip performance of cast steel cable clamps for prestressed cables	353-368
Bruschi, Eleonora / Quaglini, Virginio	Assessment of a novel hysteretic friction damper for the seismic retrofit of reinforced concrete frame structures	793-811
Shan, Wenchen / Ding, Yao / Zhou, Junwen	Automatic structural optimization design using sensitivity-based method	99-108
Zhang, Lingfeng / Zhang, Ming / Wang, Kun / Shi, Jinyu / Chen, Weihong / Yan, Kai	Axial compressive behavior of steel-reinforced reactive powder concrete short columns	433-444
Shen, Qihan / Wang, Jingfeng / Wang, Fengqin / Li, Guoqiang / Hu, Ziming	Axial loading mechanism analyses and evaluation methods of CCFT short columns with gap defects	1422-1432
Guan, Xingquan / Burton, Henry	Bias-variance tradeoff in machine learning: Theoretical formulation and implications to structural engineering applications	17-30
Ali, Mujahid / Khan, Muhammad Imran / Masood, Faisal / Alsulami, Badr T. / Bouallegue, Belgacem / Nawaz, Rab / Fediuk, Roman	Central composite design application in the optimization of the effect of waste foundry sand on concrete properties using RSM	1581-1594
Kamal, Muhammet	Code-based new approaches for determining the minimum required separation gap	750-764
Fallah-Valukolaee, Saber / Mousavi, Reza / Arjomandi, Arash / Nematzadeh, Mahdi / Kazemi, Mostafa	A comparative study of mechanical properties and life cycle assessment of high-strength concrete containing silica fume and nanosilica as a partial cement replacement	838-851
Mercimek, Ömer / Ghoroubi, Rahim / Erbaş, Yaşar / Anil, Özgür	Comparison of strengthening methods to improve punching behavior of two-way RC flat slabs	1495-1516
Latour, Massimo / Santos, Ana Francisca / Santiago, Aldina / Cavallaro, Giovanni Ferrante / Piluso, Vincenzo	Component modelling of low-damage beam-to-column joints equipped with friction dampers	1561-1580
Hung Nguyen, Van / Yu, Jun / Tan, Kang Hai	Component-based joint model for RC frames with conventional and special detailing against progressive collapse	820-837
Cheng, Shitao / He, Haoxiang / Tian, Shuyu / Cheng, Yang	Compression test of multi-scale modified concrete and application of novel damage variable in concrete performance analysis	1433-1446
Ding, Yi / Zhou, Zhen / Tian, Huiwen / Peng, zhen	Compressive behavior of concrete-filled ultra-high performance concrete tube with FRP stirrups	611-624
Li, Kai-Yeung / Piefke, Christof / Allen, Tom / Bickerton, Simon / Abdoli, Hamed / Kelly, Piaras	Computational modelling and experimental validation of structural response of ferrite core within road embedded IPT pad under mechanical loading	1407-1421
Bello, Ismail / Wardeh, George / González-Fonteboa, Belén / Martínez-Abella, Fernando / Ghorbel, Elhem	Constitutive behaviour of masonry prisms using a full-field measurement technique	1726-1736
Amiri, Saeed / Di Sarno, Luigi / Garakaninezhad, Alireza	Correlation between non-spectral and cumulative-based ground motion intensity measures and demands of structures under mainshock-aftershock seismic sequences considering the effects of incident angles	1209-1223
Xu, Kai-Yuan / Xu, Dan / Yan, Jia-Bao / Wang, Tao	Cyclic tests on steel truss-embedded steel plate-concrete composite walls	1067-1083
Bedon, C. / Rajcic, V. / Barbalic, J. / Perkovic, N.	CZM-based FE numerical study on pull-out performance of adhesive bonded-in-rod (BiR) joints for timber structures	471-491
İpek, Süleyman / Güneyisi, Erhan / Güneyisi, Esra Mete	Data-driven models for prediction of peak strength of R-CFST circular columns subjected to axial loading	1863-1880
Guan, Zhixuan / Sun, Xinjian / Zhang, Guangli / Li, Guochao / Huang, Peijie / Zhang, Baoyun / Wang, Jiwei / Zhou, Xinjie	Deformation and damage behavior of the deep concrete cut-off wall in core earth-rock dam foundation based on plastic damage model - A case study	1480-1494
Du, Ting / Chen, Jinghao / Qu, Fulin / Li, Chenyu / Zhao, Hanbing / Xie, Benyi / Yuan, Mofang / Li, Wengui	Degradation prediction of recycled aggregate concrete under sulphate wetting–drying cycles using BP neural network	1837-1850
Manalo, Allan / Alajarmeh, Omar / Yang, Xian / Ferdous, Wahid / Ebrahimzadeh, Shahrad / Benmokrane, Brahim / Sorbello, Charles-Dean / Weerakoon, Senarath / Lutze, Darren	Development and mechanical performance evaluation of a GFRP-reinforced concrete boat-approach slab	73-87
Yi, Ju / Wang, Lei / Deng, Ming / Tu, Ronghui	A double-cylinder model for bond analysis of deformed bars with eccentric concrete confinement	812-819
Kumar, Pawan / Harsha, S. P.	Dynamic analysis of porosity dependent functionally graded sigmoid piezoelectric (FGSP) plate	1737-1752
Bayat, Elyas / Tubino, Federica	Dynamic response of floors induced by a single walking pedestrian including walking path variability	1280-1292
Wang, Dengke / Luo, Jianjun / Wang, Guanqing / Li, Feilong / Su, Jie	Dynamic response of the tunnel bottom structure considering groundwater influence under heavy-haul train loading	1469-1479
Chakraborty, Purnashis / Singha, M. K. / Tiwari, Vikrant	Dynamic tensile and compressive behaviour of AA7475-T7351 alloy under different strain rates and temperatures	49-63
Zheng, Jinhai / Dou, Peng / Xue, Mi-an	Dynamics coupling analysis between elastic supporting structure and TLD with and without slat screen	969-987
Yu, Haiyan / Zhang, Mingjie / Xu, Fuyou	Effect of ice accretion on aerodynamic characteristics of pipeline suspension bridges	1851-1862
Kim, Han-Soo	Effective flexural rigidity for interaction diagram of slender reinforced concrete columns exposed to fire	1657-1668
Wang, Hao / Liu, Xiao-Gang / Yue, Qing-Rui / Zheng, Ming-zhao	Effects of different design factors on the shear performance of assembled steel–concrete composite beam with local laminated joint	1881-1895
Xie, Huanzhen / Yang, Liyun / Zhu, Haonan / Zhang, Qihu / Deng, Xin / Wei, Peng / Lu, Jian	Energy dissipation and fractal characteristics of basalt fiber reinforced concrete under impact loading	654-663
Zhang, Jin / Shu, Gan-Ping / Yang, Dong / Yang, Lv-Lei	Estimation of deformation capacity of steel beam-columns based on strain ductility coefficient	1517-1531
Su, Yi / Zou, Jun / Lu, Wei	Evaluating the mechanical behavior of post-tensioned recombinant bamboo frame with metal energy-dissipating connections	459-470
Nguyen, Tan / Truong, Tam T. / Nguyen-Thoi, Trung / Bui, Linh Van Hong / Nguyen, Thanh-Hung	Evaluation of residual flexural strength of corroded reinforced concrete beams using convolutional long short-term memory neural networks	899-912
Feng, Ran / He, Xuanrui / Wang, Fangying / Zeng, Jun-Jie / Zhu, Ji-Hua	Experimental analysis of corroded RC continuous beams rehabilitated by ICCP-SS under unsymmetrical loading	1171-1188
Patil, Yogesh Deoram / Singh, Prakash Abhiram / Pardeshi, Rahul Tarachand	Experimental and analytical investigation of innovative wing plate headed stud shear connector in composite structures	265-284
Kharma, Khaled M. / Ahmad, Shamsad / Al-Osta, Mohammed A. / Maslehuddin, Mohammed / Al-Huri, Mohammed / Khalid, Hammad / Al-Dulaijan, Salah U.	Experimental and analytical study on the effect of different repairing and strengthening strategies on flexural performance of corroded RC beams	336-352
Ma, Dengke / Shi, Jin / Yan, Ziquan / Xiao, Junheng / Sun, Linlin	Experimental and numerical investigation of the effect of the assembled state on the static-dynamic characteristics and fatigue performance of railway fastening clips	1808-1822
Ayough, Pouria / Ibrahim, Zainah / Ramli Sulong, N. H. / Ganasan, Reventheran / Ghayeb, Haider Hamad / Elchalakani, Mohamed	Experimental and numerical investigations into the compressive behaviour of circular concrete-filled double-skin steel tubular columns with bolted shear studs	880-898
Zhao, Ji-Zhi / Ding, Ran / Tao, Mu-Xuan / Zhuang, Liang-Dong	Experimental and numerical research of ultrahigh performance concrete layered shell element based on a two-dimensional fixed crack model	598-610
Jiang, Shan / Zhai, Changhai / Liu, Yiming	Experimental and numerical studies of seismic induced story-to-story and inter-story pounding	555-569
Yu, Ai-Ping / Zhao, Yan-Lin / Diwakar, K. C. / Naqvi, Mohammad Wasif / Hu, Liang-Bo	An experimental and numerical study of corrosion distribution dependent bond–slip relationship of reinforced concrete	1268-1279
Zhang, Yufei / Tan, Chengjun / Zhao, Hua / Tu, Lei / Du, Tie / Shao, Xudong	Experimental and numerical study of shear-lag effect on low-ribbed steel-UHPC composite structure	395-407
Jiang, Haibo / Hu, Zebin / Cao, Zhipeng / Gao, Xingjun / Tian, Yueqiang / Sun, Xiangdong	Experimental and numerical study on shear performance of externally prestressed precast UHPC segmental beams without stirrups	1134-1153
Li, Wenlong / Huang, Wei / Fang, Yuan / Zhang, Ke / Liu, Zongzhi / Kong, Zhengyi	Experimental and theoretical analysis on shear behavior of RC beams reinforced with GFRP stirrups	1753-1763
Shen, Yan / Qian, Ying-Jing / Wang, Yi-Bo / Yang, Xiao-Dong / Xu, Lei	Experimental investigation on bandgap properties of lead/silicone rubber phononic crystals	1626-1633
Li, Xing / Zhang, Jiwen / Liu, Bei / Min, Xinzhe / Yang, Yuchao / Liu, Yilun	Experimental investigation on the anchorage performance of hooked high-strength steel strands for beam-to-column connection	539-554
Elsayed, Mahmoud / Tayeh, Bassam A. / Taha, Youmna / El-Azim, Ahmed Abd	Experimental investigation on the behaviour of crumb rubber concrete columns exposed to chloride–sulphate attack	246-264
Singh, Maninder / Saini, Babita / Chalak, H. D.	Experimental performance of novel cost – effective hybrid composite slabs made with cementitious composite	1029-1042
Shi, Chenglong / Zhang, Jigang / Wang, Xiangying / Liu, Feifei / Chen, Wenli / Ma, Zhehao / Liang, Haizhi / Zhao, Yang	Experimental study and finite element analysis of POZD and large-rupture-strain FRP for improving the protective performance of civil air defense wall	1532-1544
Jalali, Abdolrahim / Taghizadeh, Amir	Experimental study of the effects of using ultra-high strength reinforcing rebar and UHPFRC on cyclic behavior of reinforced concrete beams	1383-1394
Chu, Yunpeng / Shi, Bixin / Gong, Yindong	Experimental study on compressive behavior of intermediate slender timber columns with local damage and the retrofitting techniques for the damaged columns	1709-1725
Chen, Yuliang / Zhang, Shaosong / Chen, Zongping	Experimental study on steel reinforced concrete T-section beam subjected to pure torsion and combined action of bending-torsion	1000-1015
Qian, Hui / Ye, Yixiang / Yan, Changbin / Jin, Guangyao / Li, Can / Shi, Yifei	Experimental study on the seismic performance of self-centering bridge piers incorporating ECC and superelastic SMA bars in the plastic hinge regions	1955-1967
Shen, Qihan / Li, Jingzhe / Wang, Jingfeng	Experimental, numerical and design investigations on the performance of axially-loaded ECFT stub columns with spherical-cap gaps	109-127
Machado, Isabella Caroline Vieira / Viana, Harley Francisco / Lanna da Silva, Renata Gomes / Costa, Rodrigo Sernizon / Campos Lavall, Armando Cesar	Finite element model for advanced analysis of plane steel frames with hinged end conditions including von Mises criterion	1918-1937
Najafgholipour, M. A. / Sarhadi, F.	A finite element study on the ultimate lateral drift capacity of interior reinforced concrete flat slab-column connections	913-926
Zhao, Zhongwei / Zhang, Tongrui / Wang, Wuyang	A form-finding method for spatial arch bridges based on inverse hanging method	64-72
Zhang, Sherong / Du, Min / Wang, Chao / Sun, Benbo / She, Lei / Liu, Wenjie	Fragility analysis of high-span aqueduct structure under near-fault and far-field ground motions	681-697
İpek, Süleyman / Degtyarev, Vitaliy V. / Güneyisi, Esra Mete / Mansouri, Iman	GEP-based models for estimating the elastic shear buckling and ultimate loads of cold-formed steel channels with staggered slotted web perforations in shear	186-200
Moutassem, Fayez	High strength concrete prestressed bridges: Exposure conditions, mechanical properties, modified design equations, parametric study, and structural reliability	1369-1382
Elseufy, Sara M. / Hussein, Ayman / Badawy, Mohamed	A hybrid SEM-ANN model for predicting overall rework impact on the performance of bridge construction projects	713-724
Wu, Chenwei / Xue, Jianyang / Song, Dejun	Hysteretic behaviors reinforcement of Dou-Gong brackets: Experimental and numerical study	299-321
Xiong, Fangjin / Wei, Bowen / Xu, Fugang	Identification of arch dam mechanical parameters based on sensitivity analysis and Hooke–Jeeves algorithm optimization	88-98
Truong, Gia Toai / Choi, Kyoung-Kyu / Kim, Chang-Soo	Implementation of boosting algorithms for prediction of punching shear strength of RC column footings	521-538
Rahgozar, Arash / Estekanchi, Homayoon E.	An improved 2DOF system for predicting the seismic performance of isolated steel moment frames	445-458
Su, Hang / Su, Qingtian / Casas, Joan R. / Xu, Chen / Tang, Jian / Jiang, Chao	Influence mechanism of Steel-concrete interlayer partial shear connections on mechanical properties of composite girders	503-520
Liu, Kang / Chen, Wei / Ye, Jihong / Ma, Jianyue / Jiang, Jian	Influence of different gypsum plasterboards on the fire performance of cold-formed steel walls	159-171
Jia, Jun-Feng / Chen, Xi-Ze / Bai, Yu-Lei / Li, Yu-Long / Wang, Zhi-Hao	An interpretable ensemble learning method to predict the compressive strength of concrete	201-213
Ruggeri, E. / D'Arenzo, G. / Fossetti, M. / Seim, W.	Investigating the effect of perpendicular walls on the lateral behaviour of Cross-Laminated Timber shear walls	1679-1695
Kesavan, Prabakaran / Menon, Arun	Investigation of in-plane and out-of-plane interaction in unreinforced masonry piers by block-based micro-modeling	1327-1344
Yang, Yanmin / Ge, Zesen / Li, Yongqing / Fan, Xinyang	Investigation on mechanical properties of lightweight sandwich exterior wall with thermal blocking shear connector	421-432
Dasar, Amry / Patah, Dahlia / Hamada, Hidenori / Yamamoto, Daisuke / Sagawa, Yasutaka	Life performance of 40-year-old RC beams with different concrete covers and bar diameters in natural corrosion environments	2031-2046
Batool, Farnaz / Jabbar Sangi, Abdul / Khan, Muhammad Saad / Islam, Kamrul	Material characterization of a historical wall by using destructive and non-destructive techniques	1669-1678
Wang, Yuzhuo / Gong, Junlin / Qu, Shuang / Zhang, Bingjie / Chen, Yangting	Mechanical properties of steel reinforced concrete T-shaped column after high temperature	852-867
Jin, Zijian / Fang, Hui / Liu, Yong	A mesoscale material and macroscale structure joint design for perforated caissons made with ultrahigh-performance concrete	765-792
Miao, Tianming / Yang, Jian / Zhou, Ying / Sha, Lirong / Zheng, Wenzhong	Method for calculating local bearing capacity of concrete under bond stress from reinforcement in straight anchor section	1796-1807
Sharma, Satyadhrik / Marasca, Alessandro / Ponte, Madalena / Bento, Rita	Modelling the in-plane cyclic behaviour of typical Portuguese rubble stone masonry using the applied element method	1224-1242
Lai, Zhichao / Jiang, Haonan / Cai, Yancheng	A new design equation to estimate the axial compressive strength of circular concrete-filled steel tubular stub columns	1043-1054
Zahedi, Mohammad Javad / Saffari, Hamed	A novel displacement amplification factor (Cd) for steel moment-resisting frames based on performance	382-394
Jadwiga Osmolska, Magdalena / Kanstad, Terje / Hendriks, Max A. N. / Markeset, Gro	Numerical investigation into the effects of corrosion on the shear performance of pretensioned bridge girders with cast-in-place slabs	1447-1468
Lv, Na / Kwame Mantey, Selase / Zhang, Yi / He, Ben / Jiang, Jianqun / Wang, Zhenyu	Numerical modeling of grouted connection damage development under uniaxial loading	1604-1617
Braga, F. / D'Amato, M. / Gigliotti, R. / Laguardia, R.	Numerical modelling of sliding isolators incorporating self-heating effects	1968-1980
Liang, Shidong / Jie, Zhiyu / Wang, Kainan	Numerical simulation and ultrasonic measurement on welding residual stresses of full penetration U-shaped stiffening ribs	322-335
Aparecida Diniz, Camila / Bortoluzzi, Daniel Brighenti / Pereira, João Luiz Junho / Simões da Cunha Junior, Sebastião / Gomes, Guilherme Ferreira	On the influence of manufacturing parameters on buckling and modal properties of sandwich composite structures	664-680
Jahjouh, Mahmoud / Erhan, Semih	Optimization of prestressed concrete bridge girder section using a modified harmony search algorithm	625-636
Alhaddad, Wael / He, Minjuan / Halabi, Yahia / Yahya Mohammed Almajhali, Khalil	Optimizing the material and printing parameters of the additively manufactured fiber-reinforced polymer composites using an artificial neural network model and artificial bee colony algorithm	1781-1795
Salaimanimagudam, M. P. / Jayaprakash, J.	Optimum selection of reinforcement, assembly, and formwork system for digital fabrication technique in construction industry – A critical review	725-749
Wang, Wanqian / Wang, Jingfeng / Guo, Lei	Out-of-plane flexural behaviour tests and numerical analysis of LEM-infilled CFS walls	146-158
Wei, Xiao-Chen / Liu, Yu-Fei / Song, Shen-you / Fan, Jian-Sheng / Su, Zong-Xian	Overall deformation of steel-concrete-steel immersed structures during construction stage considering temperature effect	1055-1066
Negi, Bichitra Singh / Jain, Kranti / Dighade, R. R.	Parametric investigation and economic design of slender steel fibre reinforced concrete beams using shear resisting mechanisms approach	868-879
Dhakal, Milap / Scott, Allan N. / Dhakal, Rajesh P. / Sullivan, Timothy J. / Clucas, Don	Performance of MgO-Mk based M S H concrete column reinforced with steel and BFRP bars under cyclic loads	1764-1780
Li, Jiayue / Deng, Zongcai	Performance of square UHPC filled high-strength steel tubular columns under axial compression: Experiment and theory analysis	1395-1406
Ali, Sarmad Abdulsahab / Ahmed, Farah H.	Performance of strengthened RC beams with torsional CFRP wraps in monolithic framed structures: Experimental and numerical investigation	936-954
Jain, Monika / Khapre, Rajendra	Post-tensioned anchorage zone: A review	31-48
Emad, Wael / Mohammed, Ahmed Salih / Kurda, Rawaz / Ghafor, Kawan / Cavaleri, Liborio / Qaidi, Shaker M. A. / Hassan, A. M. T. / Asteris, Panagiotis G.	Prediction of concrete materials compressive strength using surrogate models	1243-1267
Shan, Sidi / Pan, Wei	Progressive collapse mechanisms of multi-story steel-framed modular structures under module removal scenarios	1119-1133
Mahmood, Lavan J. / Rafiq, Serwan Kh. / Muhammad, Muhammad A.	Punching shear behavior of reinforced concrete flat slab column connection containing recycled eggshell powder	1016-1028
Majidi, Noorollah / Tajmir Riahi, Hossein / Mahdi Zandi, Sayed	Reducing computational costs in site response analysis and its application for the nonlinear dynamic analysis of structures	1345-1368
He, Haoxiang / Tian, Shuyu / Zhang, Yaoyuan	Refined fatigue damage assessment of RC beam based on fractal characteristics of cracks	1595-1603
Alkhateeb, Mahmood Y. / Hejazi, Farzad	Reinforced concrete beams externally strengthened by CFRP rods with steel plate, anchorage bolts, and concrete jacketing	1994-2013
Nikraftar, A. S. A. / Dehestani, M.	Reliability assessment of IC debonding in FRP strengthened RC beams using neural network	1896-1917
Ong, Chin-Boon / Chin, Chee-Loong / Ma, Chau-Khun / Tan, Jia-Yang / Awang, Abdullah Zawawi / Omar, Wahid	Retrofit of exterior reinforced concrete beam-column joint using pre-tensioned stiffened steel angles	1293-1312
Zahari, Khadija / Hilali, Youssef / Mesmoudi, Said / El khaoulani, Rachid / Bourihane, Oussama	Review and comparison of thin and thick FGM plate theories using a unified buckling formulation	1545-1560
Dai, Kaoshan / Yang, Yijian / Li, Tao / Ge, Qingzi / Wang, Jianze / Wang, Bin / Chen, Peng / Huang, Zhenhua	Seismic analysis of a base-isolated reinforced concrete frame using high damping rubber bearings considering hardening characteristics and bidirectional coupling effect	698-712
Feng, Xiaotian / Yu, Jinguang / Hua, Jie	Seismic behavior and design of PEC shear wall with replaceable corner components	1189-1208
Zhao, Yushuai / Zhang, Yingying / Xu, Junhao / Yu, Penghao / Yu, Qiu / Yin, Shiping	Seismic behavior and restoring force model of GFRP-RC beam-column interior joints	955-968
Moestopo, Muslinang / Imran, Iswandi / Siringoringo, Dionysius M. / Michael, James / Lim, Erwin / Yamazaki, Shinsuke	Seismic design and performance evaluation of typical lightweight and heavyweight RC girder bridges with friction pendulum bearing in Indonesia	1154-1170
Zhong, Wei-hui / Zhao, Meng-jun / Zhou, Li / Tan, Zheng / Sun, Wei / Zheng, Yu-hui	Seismic performance of a narrow flange H-beam-to-column full-bolt end-plate weak-axis connection	637-653
Wang, Shaojian / Xu, Weibing / Wang, Jin / Huang, Xiaomin / Sun, Hang / Ma, Jun / Chen, Yanjiang	Shaking table test on seismic performance of continuous rigid frame bridge with cast-in-place and fabricated super high piers	369-381
Zhao, Yushuai / Zhang, Yingying / Xu, Junhao / Yu, Penghao / Sun, Baorui	Shaking table test on seismic performance of integrated station-bridge high-speed railway station	1981-1993
Xu, Fangze / Bao, Chao / Ma, Xiaotong / Zhang, Youqi / Lim, Kar Sing / Zhang, Yuhang / Wang, Huxiang / Hu, Jun	Shaking table test on seismic response of a planar irregular structure with differential settlements of foundation	988-999
Dutta, Baisali / Kumari, Archana / Nayak, Amar N.	Shear behaviour of RC deep beams retrofitted with externally bonded GFRP fabrics: Experimental and numerical study	1-16
Chen, Liang / Yan, Jing / Xiang, Nailiang / Zhong, Jian	Shear performance of ultra-high performance concrete multi-keyed epoxy joints in precast segmental bridges	1696-1708
Rezaee, Sanaz / Yazdi, Ali Amin	Similarity conditions for predicting the effect of carbon nano-tubes on the non-linear frequency of laminated doubly curved shells	1618-1625
Xiang, Siyu / He, Yongjun / Zhou, Xuhong	Simplified analytical procedure to calculate the impact behaviour of steel parking-structure columns	1938-1954
Tang, Lei / Liu, Tianle / Sun, Pengliang / Wang, Yuanhao / Liu, Guangyan	Sisal fiber modified construction waste recycled brick as building material: Properties, performance and applications	927-935
Ejaz, Ali / Ruangrassamee, Anat / Kruavit, Pochara / Udomworarat, Pison / Wijeyewickrema, Anil C.	Strengthening of substandard lap splices using hollow steel section (HSS) collars	128-145
Dell'Endice, A. / DeJong, M. J. / Van Mele, T. / Block, P.	Structural analysis of unreinforced masonry spiral staircases using Discrete Element modelling	214-232
Zhang, Guangcai / Hou, Jiale / Wan, Chunfeng / Xie, Liyu / Xue, Songtao	Structural system identification and damage detection using adaptive hybrid Jaya and differential evolution algorithm with mutation pool strategy	1313-1326
Du, Yong / Li, Peng-fang / Huang, Lei	Study on bonding strength of hot-cast anchors subject to elevated temperature	1634-1656
Meng, Longfei / Zhu, Lihua / Zhu, Mingzeng	Study on the seismic performance of regional confined concrete columns	1105-1118
Guo, Liulu / Liu, Hongbo / Chen, Zhihua / Wang, Longxuan / Ma, Hongxu	Tension identification method of structural cable based on calibration principle in engineering	492-502
Almahmood, Hanady / Ashour, Ashraf / Figueira, Diogo / Yıldırım, Gürkan / Aldemir, Alper / Şahmaran, Mustafa	Tests of demountable reinforced concrete slabs	1084-1104
Zhou, Xiaohang / Elchalakani, Mohamed / Li, Qixuan / Ou, Junjie / Deng, Nianchun / Zhou, Yiming	Time-dependent reliability analysis of the suspender in half-through arch bridge considering temperature effect	408-420
Ohsaki, Makoto / Do, Bach / Fujiwara, Jun / Kimura, Toshiaki / Yamashita, Takuzo	Two-step parameter identification of multi-axial cyclic constitutive law of structural steels from cyclic structural responses	2014-2030
Amini Pishro, Ahad / Zhang, Zhengrui / Amini Pishro, Mojdeh / Xiong, Feng / Zhang, Lili / Yang, Qihong / Matlan, Siti Jahara	UHPC-PINN-parallel micro element system for the local bond stress–slip model subjected to monotonic loading	570-597
Sitong, Wei / Jinghua, Zhang / Chao, Zhao / Guanghui, Tang / Quangeng, Li / Qing, Sun	Ultimate strengths of triple-ring-stiffened tube-gusset X-joints considering the effect of chord load	233-245

About this
data sheet
IssueID
68695
Published on:
10/12/2022
Last updated on:
20/06/2024

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Structures - December 2022

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Structures - December 2022

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.