Structures - Dezember 2022

Erschienen:	Dezember 2022

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
George, Jofin / Menon, Arun	Analytical fragility curves for displacement-based scour assessment of masonry arch bridges	172-185
Nanda, Radhikesh P. / Damarla, Rithwez / Nayak, Kumbla Anupa	Android application of rapid visual screening for buildings in Indian context	1823-1836
Ren, Yuan / Ye, Qiaowei / Xu, Xiang / Huang, Qiao / Fan, Ziyuan / Li, Chong / Chang, Weijie	An anomaly pattern detection for bridge structural response considering time-varying temperature coefficients	285-298
Wang, Zeqiang / Han, Qinghua / Lu, Yan / Hu, Yang	Anti-slip performance of cast steel cable clamps for prestressed cables	353-368
Bruschi, Eleonora / Quaglini, Virginio	Assessment of a novel hysteretic friction damper for the seismic retrofit of reinforced concrete frame structures	793-811
Shan, Wenchen / Ding, Yao / Zhou, Junwen	Automatic structural optimization design using sensitivity-based method	99-108
Zhang, Lingfeng / Zhang, Ming / Wang, Kun / Shi, Jinyu / Chen, Weihong / Yan, Kai	Axial compressive behavior of steel-reinforced reactive powder concrete short columns	433-444
Shen, Qihan / Wang, Jingfeng / Wang, Fengqin / Li, Guoqiang / Hu, Ziming	Axial loading mechanism analyses and evaluation methods of CCFT short columns with gap defects	1422-1432
Guan, Xingquan / Burton, Henry	Bias-variance tradeoff in machine learning: Theoretical formulation and implications to structural engineering applications	17-30
Ali, Mujahid / Khan, Muhammad Imran / Masood, Faisal / Alsulami, Badr T. / Bouallegue, Belgacem / Nawaz, Rab / Fediuk, Roman	Central composite design application in the optimization of the effect of waste foundry sand on concrete properties using RSM	1581-1594
Kamal, Muhammet	Code-based new approaches for determining the minimum required separation gap	750-764
Fallah-Valukolaee, Saber / Mousavi, Reza / Arjomandi, Arash / Nematzadeh, Mahdi / Kazemi, Mostafa	A comparative study of mechanical properties and life cycle assessment of high-strength concrete containing silica fume and nanosilica as a partial cement replacement	838-851
Mercimek, Ömer / Ghoroubi, Rahim / Erbaş, Yaşar / Anil, Özgür	Comparison of strengthening methods to improve punching behavior of two-way RC flat slabs	1495-1516
Latour, Massimo / Santos, Ana Francisca / Santiago, Aldina / Cavallaro, Giovanni Ferrante / Piluso, Vincenzo	Component modelling of low-damage beam-to-column joints equipped with friction dampers	1561-1580
Hung Nguyen, Van / Yu, Jun / Tan, Kang Hai	Component-based joint model for RC frames with conventional and special detailing against progressive collapse	820-837
Cheng, Shitao / He, Haoxiang / Tian, Shuyu / Cheng, Yang	Compression test of multi-scale modified concrete and application of novel damage variable in concrete performance analysis	1433-1446
Ding, Yi / Zhou, Zhen / Tian, Huiwen / Peng, zhen	Compressive behavior of concrete-filled ultra-high performance concrete tube with FRP stirrups	611-624
Li, Kai-Yeung / Piefke, Christof / Allen, Tom / Bickerton, Simon / Abdoli, Hamed / Kelly, Piaras	Computational modelling and experimental validation of structural response of ferrite core within road embedded IPT pad under mechanical loading	1407-1421
Bello, Ismail / Wardeh, George / González-Fonteboa, Belén / Martínez-Abella, Fernando / Ghorbel, Elhem	Constitutive behaviour of masonry prisms using a full-field measurement technique	1726-1736
Amiri, Saeed / Di Sarno, Luigi / Garakaninezhad, Alireza	Correlation between non-spectral and cumulative-based ground motion intensity measures and demands of structures under mainshock-aftershock seismic sequences considering the effects of incident angles	1209-1223
Xu, Kai-Yuan / Xu, Dan / Yan, Jia-Bao / Wang, Tao	Cyclic tests on steel truss-embedded steel plate-concrete composite walls	1067-1083
Bedon, C. / Rajcic, V. / Barbalic, J. / Perkovic, N.	CZM-based FE numerical study on pull-out performance of adhesive bonded-in-rod (BiR) joints for timber structures	471-491
İpek, Süleyman / Güneyisi, Erhan / Güneyisi, Esra Mete	Data-driven models for prediction of peak strength of R-CFST circular columns subjected to axial loading	1863-1880
Guan, Zhixuan / Sun, Xinjian / Zhang, Guangli / Li, Guochao / Huang, Peijie / Zhang, Baoyun / Wang, Jiwei / Zhou, Xinjie	Deformation and damage behavior of the deep concrete cut-off wall in core earth-rock dam foundation based on plastic damage model - A case study	1480-1494
Du, Ting / Chen, Jinghao / Qu, Fulin / Li, Chenyu / Zhao, Hanbing / Xie, Benyi / Yuan, Mofang / Li, Wengui	Degradation prediction of recycled aggregate concrete under sulphate wetting–drying cycles using BP neural network	1837-1850
Manalo, Allan / Alajarmeh, Omar / Yang, Xian / Ferdous, Wahid / Ebrahimzadeh, Shahrad / Benmokrane, Brahim / Sorbello, Charles-Dean / Weerakoon, Senarath / Lutze, Darren	Development and mechanical performance evaluation of a GFRP-reinforced concrete boat-approach slab	73-87
Yi, Ju / Wang, Lei / Deng, Ming / Tu, Ronghui	A double-cylinder model for bond analysis of deformed bars with eccentric concrete confinement	812-819
Kumar, Pawan / Harsha, S. P.	Dynamic analysis of porosity dependent functionally graded sigmoid piezoelectric (FGSP) plate	1737-1752
Bayat, Elyas / Tubino, Federica	Dynamic response of floors induced by a single walking pedestrian including walking path variability	1280-1292
Wang, Dengke / Luo, Jianjun / Wang, Guanqing / Li, Feilong / Su, Jie	Dynamic response of the tunnel bottom structure considering groundwater influence under heavy-haul train loading	1469-1479
Chakraborty, Purnashis / Singha, M. K. / Tiwari, Vikrant	Dynamic tensile and compressive behaviour of AA7475-T7351 alloy under different strain rates and temperatures	49-63
Zheng, Jinhai / Dou, Peng / Xue, Mi-an	Dynamics coupling analysis between elastic supporting structure and TLD with and without slat screen	969-987
Yu, Haiyan / Zhang, Mingjie / Xu, Fuyou	Effect of ice accretion on aerodynamic characteristics of pipeline suspension bridges	1851-1862
Kim, Han-Soo	Effective flexural rigidity for interaction diagram of slender reinforced concrete columns exposed to fire	1657-1668
Wang, Hao / Liu, Xiao-Gang / Yue, Qing-Rui / Zheng, Ming-zhao	Effects of different design factors on the shear performance of assembled steel–concrete composite beam with local laminated joint	1881-1895
Xie, Huanzhen / Yang, Liyun / Zhu, Haonan / Zhang, Qihu / Deng, Xin / Wei, Peng / Lu, Jian	Energy dissipation and fractal characteristics of basalt fiber reinforced concrete under impact loading	654-663
Zhang, Jin / Shu, Gan-Ping / Yang, Dong / Yang, Lv-Lei	Estimation of deformation capacity of steel beam-columns based on strain ductility coefficient	1517-1531
Su, Yi / Zou, Jun / Lu, Wei	Evaluating the mechanical behavior of post-tensioned recombinant bamboo frame with metal energy-dissipating connections	459-470
Nguyen, Tan / Truong, Tam T. / Nguyen-Thoi, Trung / Bui, Linh Van Hong / Nguyen, Thanh-Hung	Evaluation of residual flexural strength of corroded reinforced concrete beams using convolutional long short-term memory neural networks	899-912
Feng, Ran / He, Xuanrui / Wang, Fangying / Zeng, Jun-Jie / Zhu, Ji-Hua	Experimental analysis of corroded RC continuous beams rehabilitated by ICCP-SS under unsymmetrical loading	1171-1188
Patil, Yogesh Deoram / Singh, Prakash Abhiram / Pardeshi, Rahul Tarachand	Experimental and analytical investigation of innovative wing plate headed stud shear connector in composite structures	265-284
Kharma, Khaled M. / Ahmad, Shamsad / Al-Osta, Mohammed A. / Maslehuddin, Mohammed / Al-Huri, Mohammed / Khalid, Hammad / Al-Dulaijan, Salah U.	Experimental and analytical study on the effect of different repairing and strengthening strategies on flexural performance of corroded RC beams	336-352
Ma, Dengke / Shi, Jin / Yan, Ziquan / Xiao, Junheng / Sun, Linlin	Experimental and numerical investigation of the effect of the assembled state on the static-dynamic characteristics and fatigue performance of railway fastening clips	1808-1822
Ayough, Pouria / Ibrahim, Zainah / Ramli Sulong, N. H. / Ganasan, Reventheran / Ghayeb, Haider Hamad / Elchalakani, Mohamed	Experimental and numerical investigations into the compressive behaviour of circular concrete-filled double-skin steel tubular columns with bolted shear studs	880-898
Zhao, Ji-Zhi / Ding, Ran / Tao, Mu-Xuan / Zhuang, Liang-Dong	Experimental and numerical research of ultrahigh performance concrete layered shell element based on a two-dimensional fixed crack model	598-610
Jiang, Shan / Zhai, Changhai / Liu, Yiming	Experimental and numerical studies of seismic induced story-to-story and inter-story pounding	555-569
Yu, Ai-Ping / Zhao, Yan-Lin / Diwakar, K. C. / Naqvi, Mohammad Wasif / Hu, Liang-Bo	An experimental and numerical study of corrosion distribution dependent bond–slip relationship of reinforced concrete	1268-1279
Zhang, Yufei / Tan, Chengjun / Zhao, Hua / Tu, Lei / Du, Tie / Shao, Xudong	Experimental and numerical study of shear-lag effect on low-ribbed steel-UHPC composite structure	395-407
Jiang, Haibo / Hu, Zebin / Cao, Zhipeng / Gao, Xingjun / Tian, Yueqiang / Sun, Xiangdong	Experimental and numerical study on shear performance of externally prestressed precast UHPC segmental beams without stirrups	1134-1153
Li, Wenlong / Huang, Wei / Fang, Yuan / Zhang, Ke / Liu, Zongzhi / Kong, Zhengyi	Experimental and theoretical analysis on shear behavior of RC beams reinforced with GFRP stirrups	1753-1763
Shen, Yan / Qian, Ying-Jing / Wang, Yi-Bo / Yang, Xiao-Dong / Xu, Lei	Experimental investigation on bandgap properties of lead/silicone rubber phononic crystals	1626-1633
Li, Xing / Zhang, Jiwen / Liu, Bei / Min, Xinzhe / Yang, Yuchao / Liu, Yilun	Experimental investigation on the anchorage performance of hooked high-strength steel strands for beam-to-column connection	539-554
Elsayed, Mahmoud / Tayeh, Bassam A. / Taha, Youmna / El-Azim, Ahmed Abd	Experimental investigation on the behaviour of crumb rubber concrete columns exposed to chloride–sulphate attack	246-264
Singh, Maninder / Saini, Babita / Chalak, H. D.	Experimental performance of novel cost – effective hybrid composite slabs made with cementitious composite	1029-1042
Shi, Chenglong / Zhang, Jigang / Wang, Xiangying / Liu, Feifei / Chen, Wenli / Ma, Zhehao / Liang, Haizhi / Zhao, Yang	Experimental study and finite element analysis of POZD and large-rupture-strain FRP for improving the protective performance of civil air defense wall	1532-1544
Jalali, Abdolrahim / Taghizadeh, Amir	Experimental study of the effects of using ultra-high strength reinforcing rebar and UHPFRC on cyclic behavior of reinforced concrete beams	1383-1394
Chu, Yunpeng / Shi, Bixin / Gong, Yindong	Experimental study on compressive behavior of intermediate slender timber columns with local damage and the retrofitting techniques for the damaged columns	1709-1725
Chen, Yuliang / Zhang, Shaosong / Chen, Zongping	Experimental study on steel reinforced concrete T-section beam subjected to pure torsion and combined action of bending-torsion	1000-1015
Qian, Hui / Ye, Yixiang / Yan, Changbin / Jin, Guangyao / Li, Can / Shi, Yifei	Experimental study on the seismic performance of self-centering bridge piers incorporating ECC and superelastic SMA bars in the plastic hinge regions	1955-1967
Shen, Qihan / Li, Jingzhe / Wang, Jingfeng	Experimental, numerical and design investigations on the performance of axially-loaded ECFT stub columns with spherical-cap gaps	109-127
Machado, Isabella Caroline Vieira / Viana, Harley Francisco / Lanna da Silva, Renata Gomes / Costa, Rodrigo Sernizon / Campos Lavall, Armando Cesar	Finite element model for advanced analysis of plane steel frames with hinged end conditions including von Mises criterion	1918-1937
Najafgholipour, M. A. / Sarhadi, F.	A finite element study on the ultimate lateral drift capacity of interior reinforced concrete flat slab-column connections	913-926
Zhao, Zhongwei / Zhang, Tongrui / Wang, Wuyang	A form-finding method for spatial arch bridges based on inverse hanging method	64-72
Zhang, Sherong / Du, Min / Wang, Chao / Sun, Benbo / She, Lei / Liu, Wenjie	Fragility analysis of high-span aqueduct structure under near-fault and far-field ground motions	681-697
İpek, Süleyman / Degtyarev, Vitaliy V. / Güneyisi, Esra Mete / Mansouri, Iman	GEP-based models for estimating the elastic shear buckling and ultimate loads of cold-formed steel channels with staggered slotted web perforations in shear	186-200
Moutassem, Fayez	High strength concrete prestressed bridges: Exposure conditions, mechanical properties, modified design equations, parametric study, and structural reliability	1369-1382
Elseufy, Sara M. / Hussein, Ayman / Badawy, Mohamed	A hybrid SEM-ANN model for predicting overall rework impact on the performance of bridge construction projects	713-724
Wu, Chenwei / Xue, Jianyang / Song, Dejun	Hysteretic behaviors reinforcement of Dou-Gong brackets: Experimental and numerical study	299-321
Xiong, Fangjin / Wei, Bowen / Xu, Fugang	Identification of arch dam mechanical parameters based on sensitivity analysis and Hooke–Jeeves algorithm optimization	88-98
Truong, Gia Toai / Choi, Kyoung-Kyu / Kim, Chang-Soo	Implementation of boosting algorithms for prediction of punching shear strength of RC column footings	521-538
Rahgozar, Arash / Estekanchi, Homayoon E.	An improved 2DOF system for predicting the seismic performance of isolated steel moment frames	445-458
Su, Hang / Su, Qingtian / Casas, Joan R. / Xu, Chen / Tang, Jian / Jiang, Chao	Influence mechanism of Steel-concrete interlayer partial shear connections on mechanical properties of composite girders	503-520
Liu, Kang / Chen, Wei / Ye, Jihong / Ma, Jianyue / Jiang, Jian	Influence of different gypsum plasterboards on the fire performance of cold-formed steel walls	159-171
Jia, Jun-Feng / Chen, Xi-Ze / Bai, Yu-Lei / Li, Yu-Long / Wang, Zhi-Hao	An interpretable ensemble learning method to predict the compressive strength of concrete	201-213
Ruggeri, E. / D'Arenzo, G. / Fossetti, M. / Seim, W.	Investigating the effect of perpendicular walls on the lateral behaviour of Cross-Laminated Timber shear walls	1679-1695
Kesavan, Prabakaran / Menon, Arun	Investigation of in-plane and out-of-plane interaction in unreinforced masonry piers by block-based micro-modeling	1327-1344
Yang, Yanmin / Ge, Zesen / Li, Yongqing / Fan, Xinyang	Investigation on mechanical properties of lightweight sandwich exterior wall with thermal blocking shear connector	421-432
Dasar, Amry / Patah, Dahlia / Hamada, Hidenori / Yamamoto, Daisuke / Sagawa, Yasutaka	Life performance of 40-year-old RC beams with different concrete covers and bar diameters in natural corrosion environments	2031-2046
Batool, Farnaz / Jabbar Sangi, Abdul / Khan, Muhammad Saad / Islam, Kamrul	Material characterization of a historical wall by using destructive and non-destructive techniques	1669-1678
Wang, Yuzhuo / Gong, Junlin / Qu, Shuang / Zhang, Bingjie / Chen, Yangting	Mechanical properties of steel reinforced concrete T-shaped column after high temperature	852-867
Jin, Zijian / Fang, Hui / Liu, Yong	A mesoscale material and macroscale structure joint design for perforated caissons made with ultrahigh-performance concrete	765-792
Miao, Tianming / Yang, Jian / Zhou, Ying / Sha, Lirong / Zheng, Wenzhong	Method for calculating local bearing capacity of concrete under bond stress from reinforcement in straight anchor section	1796-1807
Sharma, Satyadhrik / Marasca, Alessandro / Ponte, Madalena / Bento, Rita	Modelling the in-plane cyclic behaviour of typical Portuguese rubble stone masonry using the applied element method	1224-1242
Lai, Zhichao / Jiang, Haonan / Cai, Yancheng	A new design equation to estimate the axial compressive strength of circular concrete-filled steel tubular stub columns	1043-1054
Zahedi, Mohammad Javad / Saffari, Hamed	A novel displacement amplification factor (Cd) for steel moment-resisting frames based on performance	382-394
Jadwiga Osmolska, Magdalena / Kanstad, Terje / Hendriks, Max A. N. / Markeset, Gro	Numerical investigation into the effects of corrosion on the shear performance of pretensioned bridge girders with cast-in-place slabs	1447-1468
Lv, Na / Kwame Mantey, Selase / Zhang, Yi / He, Ben / Jiang, Jianqun / Wang, Zhenyu	Numerical modeling of grouted connection damage development under uniaxial loading	1604-1617
Braga, F. / D'Amato, M. / Gigliotti, R. / Laguardia, R.	Numerical modelling of sliding isolators incorporating self-heating effects	1968-1980
Liang, Shidong / Jie, Zhiyu / Wang, Kainan	Numerical simulation and ultrasonic measurement on welding residual stresses of full penetration U-shaped stiffening ribs	322-335
Aparecida Diniz, Camila / Bortoluzzi, Daniel Brighenti / Pereira, João Luiz Junho / Simões da Cunha Junior, Sebastião / Gomes, Guilherme Ferreira	On the influence of manufacturing parameters on buckling and modal properties of sandwich composite structures	664-680
Jahjouh, Mahmoud / Erhan, Semih	Optimization of prestressed concrete bridge girder section using a modified harmony search algorithm	625-636
Alhaddad, Wael / He, Minjuan / Halabi, Yahia / Yahya Mohammed Almajhali, Khalil	Optimizing the material and printing parameters of the additively manufactured fiber-reinforced polymer composites using an artificial neural network model and artificial bee colony algorithm	1781-1795
Salaimanimagudam, M. P. / Jayaprakash, J.	Optimum selection of reinforcement, assembly, and formwork system for digital fabrication technique in construction industry – A critical review	725-749
Wang, Wanqian / Wang, Jingfeng / Guo, Lei	Out-of-plane flexural behaviour tests and numerical analysis of LEM-infilled CFS walls	146-158
Wei, Xiao-Chen / Liu, Yu-Fei / Song, Shen-you / Fan, Jian-Sheng / Su, Zong-Xian	Overall deformation of steel-concrete-steel immersed structures during construction stage considering temperature effect	1055-1066
Negi, Bichitra Singh / Jain, Kranti / Dighade, R. R.	Parametric investigation and economic design of slender steel fibre reinforced concrete beams using shear resisting mechanisms approach	868-879
Dhakal, Milap / Scott, Allan N. / Dhakal, Rajesh P. / Sullivan, Timothy J. / Clucas, Don	Performance of MgO-Mk based M S H concrete column reinforced with steel and BFRP bars under cyclic loads	1764-1780
Li, Jiayue / Deng, Zongcai	Performance of square UHPC filled high-strength steel tubular columns under axial compression: Experiment and theory analysis	1395-1406
Ali, Sarmad Abdulsahab / Ahmed, Farah H.	Performance of strengthened RC beams with torsional CFRP wraps in monolithic framed structures: Experimental and numerical investigation	936-954
Jain, Monika / Khapre, Rajendra	Post-tensioned anchorage zone: A review	31-48
Emad, Wael / Mohammed, Ahmed Salih / Kurda, Rawaz / Ghafor, Kawan / Cavaleri, Liborio / Qaidi, Shaker M. A. / Hassan, A. M. T. / Asteris, Panagiotis G.	Prediction of concrete materials compressive strength using surrogate models	1243-1267
Shan, Sidi / Pan, Wei	Progressive collapse mechanisms of multi-story steel-framed modular structures under module removal scenarios	1119-1133
Mahmood, Lavan J. / Rafiq, Serwan Kh. / Muhammad, Muhammad A.	Punching shear behavior of reinforced concrete flat slab column connection containing recycled eggshell powder	1016-1028
Majidi, Noorollah / Tajmir Riahi, Hossein / Mahdi Zandi, Sayed	Reducing computational costs in site response analysis and its application for the nonlinear dynamic analysis of structures	1345-1368
He, Haoxiang / Tian, Shuyu / Zhang, Yaoyuan	Refined fatigue damage assessment of RC beam based on fractal characteristics of cracks	1595-1603
Alkhateeb, Mahmood Y. / Hejazi, Farzad	Reinforced concrete beams externally strengthened by CFRP rods with steel plate, anchorage bolts, and concrete jacketing	1994-2013
Nikraftar, A. S. A. / Dehestani, M.	Reliability assessment of IC debonding in FRP strengthened RC beams using neural network	1896-1917
Ong, Chin-Boon / Chin, Chee-Loong / Ma, Chau-Khun / Tan, Jia-Yang / Awang, Abdullah Zawawi / Omar, Wahid	Retrofit of exterior reinforced concrete beam-column joint using pre-tensioned stiffened steel angles	1293-1312
Zahari, Khadija / Hilali, Youssef / Mesmoudi, Said / El khaoulani, Rachid / Bourihane, Oussama	Review and comparison of thin and thick FGM plate theories using a unified buckling formulation	1545-1560
Dai, Kaoshan / Yang, Yijian / Li, Tao / Ge, Qingzi / Wang, Jianze / Wang, Bin / Chen, Peng / Huang, Zhenhua	Seismic analysis of a base-isolated reinforced concrete frame using high damping rubber bearings considering hardening characteristics and bidirectional coupling effect	698-712
Feng, Xiaotian / Yu, Jinguang / Hua, Jie	Seismic behavior and design of PEC shear wall with replaceable corner components	1189-1208
Zhao, Yushuai / Zhang, Yingying / Xu, Junhao / Yu, Penghao / Yu, Qiu / Yin, Shiping	Seismic behavior and restoring force model of GFRP-RC beam-column interior joints	955-968
Moestopo, Muslinang / Imran, Iswandi / Siringoringo, Dionysius M. / Michael, James / Lim, Erwin / Yamazaki, Shinsuke	Seismic design and performance evaluation of typical lightweight and heavyweight RC girder bridges with friction pendulum bearing in Indonesia	1154-1170
Zhong, Wei-hui / Zhao, Meng-jun / Zhou, Li / Tan, Zheng / Sun, Wei / Zheng, Yu-hui	Seismic performance of a narrow flange H-beam-to-column full-bolt end-plate weak-axis connection	637-653
Wang, Shaojian / Xu, Weibing / Wang, Jin / Huang, Xiaomin / Sun, Hang / Ma, Jun / Chen, Yanjiang	Shaking table test on seismic performance of continuous rigid frame bridge with cast-in-place and fabricated super high piers	369-381
Zhao, Yushuai / Zhang, Yingying / Xu, Junhao / Yu, Penghao / Sun, Baorui	Shaking table test on seismic performance of integrated station-bridge high-speed railway station	1981-1993
Xu, Fangze / Bao, Chao / Ma, Xiaotong / Zhang, Youqi / Lim, Kar Sing / Zhang, Yuhang / Wang, Huxiang / Hu, Jun	Shaking table test on seismic response of a planar irregular structure with differential settlements of foundation	988-999
Dutta, Baisali / Kumari, Archana / Nayak, Amar N.	Shear behaviour of RC deep beams retrofitted with externally bonded GFRP fabrics: Experimental and numerical study	1-16
Chen, Liang / Yan, Jing / Xiang, Nailiang / Zhong, Jian	Shear performance of ultra-high performance concrete multi-keyed epoxy joints in precast segmental bridges	1696-1708
Rezaee, Sanaz / Yazdi, Ali Amin	Similarity conditions for predicting the effect of carbon nano-tubes on the non-linear frequency of laminated doubly curved shells	1618-1625
Xiang, Siyu / He, Yongjun / Zhou, Xuhong	Simplified analytical procedure to calculate the impact behaviour of steel parking-structure columns	1938-1954
Tang, Lei / Liu, Tianle / Sun, Pengliang / Wang, Yuanhao / Liu, Guangyan	Sisal fiber modified construction waste recycled brick as building material: Properties, performance and applications	927-935
Ejaz, Ali / Ruangrassamee, Anat / Kruavit, Pochara / Udomworarat, Pison / Wijeyewickrema, Anil C.	Strengthening of substandard lap splices using hollow steel section (HSS) collars	128-145
Dell'Endice, A. / DeJong, M. J. / Van Mele, T. / Block, P.	Structural analysis of unreinforced masonry spiral staircases using Discrete Element modelling	214-232
Zhang, Guangcai / Hou, Jiale / Wan, Chunfeng / Xie, Liyu / Xue, Songtao	Structural system identification and damage detection using adaptive hybrid Jaya and differential evolution algorithm with mutation pool strategy	1313-1326
Du, Yong / Li, Peng-fang / Huang, Lei	Study on bonding strength of hot-cast anchors subject to elevated temperature	1634-1656
Meng, Longfei / Zhu, Lihua / Zhu, Mingzeng	Study on the seismic performance of regional confined concrete columns	1105-1118
Guo, Liulu / Liu, Hongbo / Chen, Zhihua / Wang, Longxuan / Ma, Hongxu	Tension identification method of structural cable based on calibration principle in engineering	492-502
Almahmood, Hanady / Ashour, Ashraf / Figueira, Diogo / Yıldırım, Gürkan / Aldemir, Alper / Şahmaran, Mustafa	Tests of demountable reinforced concrete slabs	1084-1104
Zhou, Xiaohang / Elchalakani, Mohamed / Li, Qixuan / Ou, Junjie / Deng, Nianchun / Zhou, Yiming	Time-dependent reliability analysis of the suspender in half-through arch bridge considering temperature effect	408-420
Ohsaki, Makoto / Do, Bach / Fujiwara, Jun / Kimura, Toshiaki / Yamashita, Takuzo	Two-step parameter identification of multi-axial cyclic constitutive law of structural steels from cyclic structural responses	2014-2030
Amini Pishro, Ahad / Zhang, Zhengrui / Amini Pishro, Mojdeh / Xiong, Feng / Zhang, Lili / Yang, Qihong / Matlan, Siti Jahara	UHPC-PINN-parallel micro element system for the local bond stress–slip model subjected to monotonic loading	570-597
Sitong, Wei / Jinghua, Zhang / Chao, Zhao / Guanghui, Tang / Quangeng, Li / Qing, Sun	Ultimate strengths of triple-ring-stiffened tube-gusset X-joints considering the effect of chord load	233-245

Über diese
Datenseite
IssueID
68695
Veröffentlicht am:
10.12.2022
Geändert am:
20.06.2024

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Structures - Dezember 2022

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Structures - Dezember 2022

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.