Structures - January 2022

Published:	January 2022

Articles in this Issue

Author(s)	Title	Page(s)
Wu, Bitao / Zhou, Yujian / Yin, Xiang / Lin, Zucai / Zhou, Zhenwei	The anti-arch inhibition effect of multispan continuous girder bridge strengthened with prestressed CFRP plates	845-855
Anuradha, V. / Ch.Madhavi, T.	Behaviour of self compacting concrete hybrid fiber reinforced hollow beams	990-1001
Hassan, Haysam S. / Elkhatib, Ali A. / Ahmed, Mohamed M. / Al-Tamimi, Adil K.	Behaviour of self-repaired reinforced concrete beams made using smart materials under static cyclic loads (shear study)	406-420
Zhang, Jiawei / Li, Hang / Liu, Shengwei / Zhang, Xiangyan / Yang, Chenghong / Zhang, Rongling	Bond behavior of the CFRP-concrete interface under combined sustained load and sulfate erosion	551-564
Kazemianfar, Behzad / Nami, Mohammad Rahim	Can a 3D woven GFRP composite really provide better impact resistance compared to a 2D woven GFRP composite at all of the thicknesses?	36-45
Liu, Wei / Ikago, Kohju	Causal implementation of rate-independent linear damping for the seismic protection of low-frequency structures	274-288
Liu, Jian / Gao, Ziyue	A comparative study of models for shear strength of reinforced concrete T-beams	922-930
Zhong, Jiwei / Gou, Hongye / Zhao, Hu / Zhao, Tianqi / Wang, Xiang	Comparison of several model updating methods based on full-scale model test of track beam	46-54
Solahuddin, B. A.	A critical review on experimental investigation and finite element analysis on structural performance of kenaf fibre reinforced concrete	1030-1061
Zhao, X. Y. / Zhang, H. Y. / Wu, B. / Jin, H. M. / Leung, K. T. / Lau, L. S. / Lee, K. H.	Cyclic behavior of non-seismically detailed full-scale exterior beam-column subassemblies with setback in columns	531-550
Torra-Bilal, Ines / Mahamid, Mustafa / Baran, Eray	Cyclic behaviour of precast beam-to-column connections: An experimental and numerical investigation	939-957
Chen, Guo / Wu, Xintao / Jiang, Hao / Wang, Zhenguo / Yin, Mingyang	Cyclic response of laminated bamboo lumber nailed connection: Theoretical modelling and experimental investigations	118-131
Das, Subhajit / Dhang, Nirjhar	Damage identification of structures using incomplete mode shape and improved TLBO-PSO with self-controlled multi-stage strategy	1101-1124
Lu, Chunhua / Bu, Senzhuang / Zheng, Yulong / Kosa, Kenji	Deterioration of concrete mechanical properties and fracture of steel bars caused by alkali-silica reaction: A review	893-902
Hadigheh, S. Ali / Ke, Feihu / Fatemi, Hamid	Durability design criteria for the hybrid carbon fibre reinforced polymer (CFRP)-reinforced geopolymer concrete bridges	325-339
Naghipour, Morteza / Ahmadi, Mohsen / Nematzadeh, Mahdi	Effect of concrete confinement level on load-bearing capacity of steel-reinforced concrete (SRC) columns under eccentric loading: Experiment and FEA model	202-213
Xu, Fan / Wang, Sheliang / Li, Tao / Li, Zhijun	Effect of metakaolin on the mechanical properties and pore characteristics of fiber-reinforced tailing recycled aggregate concrete	15-25
Yilmaz, Tolga / Anil, Özgür / Erdem, R. Tuğrul	Experimental and numerical investigation of impact behavior of RC slab with different opening size and layout	818-832
Zekavati, Ali Asghar / Jafari, Mohammad Ali / Saeedi, Ali	Experimental and numerical investigation on the structural performance of a novel type of pultruded composite cross-arm for power transmission towers	833-844
Xue, Jianyang / Liang, Xuanwen / Wu, Chenwei / Song, Dejun / Qi, Liangjie	Experimental and numerical study on eccentric compression performance of Dou-Gong brackets at column tops	608-621
Cheng, Chen / Wan, Shui / Song, Aiming	Experimental and numerical study on the mechanical properties of embedded double-row-pins connectors	214-232
Yuan, Lin / Zhang, Qilin / Ouyang, Yuanwen	Experimental investigation and design method of the flexural buckling resistance of high-strength aluminum alloy H-columns	1339-1349
Boostani, Maryam / Rezaifar, Omid / Gholhaki, Majid	Experimental investigation of a new lateral bracing system called OGrid under cyclic loading	172-191
El-Zohairy, Ayman / Salim, Hani / Shaaban, Hesham	Experimental investigation on fatigue behavior of composite beams with different studs arrangements	146-159
Said, AbdulMuttalib. I. / Mabrook Mouwainea, Enas	Experimental investigation on reinforced concrete slabs under high-mass low velocity repeated impact loads	314-324
Qiao, Huiyun / Zhang, Mingfeng / Liu, Zhongcun / Chen, Yu / Qiu, Huasheng / Wang, Zheng	Experimental investigation on square steel tubular columns with initial crack defects	388-405
Han, Guoqing / Jiang, Lizhong / Xu, Min	Experimental investigation on the flexural-shear performance of railway short piers	792-806
Tan, Ji-Ke / Su, Mei-Ni / Wang, Yu-Hang / Wang, Kang / Cao, Yun-Qi / Li, Peng	Experimental study on cyclic shear performance of steel plate shear wall with different buckling restraints	469-482
Feng, Ran / Zhang, Jingzhou / Li, Yanwen / Zhu, Ji-Hua	Experimental study on hysteretic behavior for corroded circular RC columns retrofitted by ICCP-SS	421-435
Junaid, M. Talha / Karzad, Abdul Saboor / Elbana, Abdalla / Altoubat, Salah	Experimental study on shear response of GFRP reinforced concrete beams strengthened with externally bonded CFRP sheets	1295-1307
Li, Ming / Yao, Lingbo / He, Liusheng / Mao, Xiaoyong / Li, Guojian	Experimental study on the compressive behavior of concrete filled steel tubular columns with regional corrosion	882-892
Huang, Wei / Hu, Gaoxing / Zhang, Jiarui	Experimental study on the seismic performance of new precast concrete beam-column joints with replaceable connection	856-872
Bonopera, Marco / Liao, Wen-Cheng / Perceka, Wisena	Experimental–theoretical investigation of the short-term vibration response of uncracked prestressed concrete members under long-age conditions	260-273
Zhao, Lin / Cui, Wei / Shen, Xiaomin / Xu, Shengyi / Ding, Yejun / Ge, Yaojun	A fast on-site measure-analyze-suppress response to control vortex-induced-vibration of a long-span bridge	192-201
Khalid Ali, Omar / Al-Hadithi, Abdulkader Ismail / Noaman, Ahmed Tareq	Flexural performance of layered PET fiber reinforced concrete beams	55-67
Zhou, Linyun / Wan, Shui	Full-range nonlinear analysis of post-tensioned anchorage zones based on modified strut-and-tie model	565-576
Liu, Kun / Chen, Wei / Ye, Jihong / Jiang, Jian	Full-scale fire and postearthquake fire experiments of CFS walls with new configurations	706-721
Chandrasekaran, Srinivasan / Hari, S. / Amirthalingam, Murugaiyan	Functionally graded materials for marine risers by additive manufacturing for high-temperature applications: Experimental investigations	931-938
Huang, Xiaogang / Li, Bikun / Zhou, Xuhong / Wang, Yuhang / Zhu, Ronghua	Geometric optimisation analysis of Steel–Concrete hybrid wind turbine towers	1125-1137
Rad, Mohammad Javad Ghasemi / Ohadi, Sima / Jafari-Asl, Jafar / Vatani, Arash / Ahmadabadi, Sanaz Afzali / Correia, José A. F. O.	GNDO-SVR: An efficient surrogate modeling approach for reliability-based design optimization of concrete dams	722-733
He, Jun / Suwaed, Ahmed S. H. / Vasdravellis, George	Horizontal pushout tests and parametric analyses of a locking-bolt demountable shear connector	667-683
Suzuki, Atsushi / Fujita, Tomomi / Kimura, Yoshihiro	Identifying damage mechanisms of gymnasium structure damaged by the 2011 Tohoku earthquake based on biaxial excitation	1321-1338
Gusella, Federico / Orlando, Maurizio / Peterman, Kara D.	The impact of variability and combined loads on fuses in braced frames	650-666
Liu, Ziyi / Lu, Zhenzhou / Ling, Chunyan / Feng, Kaixuan / Hu, Yingshi	An improved AK-MCS for reliability analysis by an efficient and simple reduction strategy of candidate sample pool	373-387
Kaveh, Ali / Biabani Hamedani, Kiarash	Improved arithmetic optimization algorithm and its application to discrete structural optimization	748-764
Zahra, Tatheer / Asad, Mohammad / Thamboo, Julian / Noor-E-Khuda, Sarkar / Derakhshan, Hossein	Influence of restrainer bar chairs on the compression and flexural behaviour of reinforced masonry walls	360-372
Rooshenas, Arash	Investigating the effects of masonry infill panels on high-rise structures	106-117
Cai, Chenzhi / Huang, Shiji / He, Xuhui / Zhou, Tieming / Zou, Yunfeng	Investigation of concrete box girder positive temperature gradient patterns considering different climatic regions	591-607
Nejad, Reza Masoudi / Ghahremani Moghadam, Danial / Hadi, Meisam / Zamani, Pedram / Berto, Filippo	An investigation on static and fatigue life evaluation of grooved adhesively bonded T-joints	340-349
Ji, Xin-Lin / Zhu, Li / Su, Ray Kai-Leung / Wang, Guang-Ming	Lateral overturning process and failure mechanism of curved steel-concrete composite box-girder bridges under specific overloading vehicles	638-649
Xu, Bo-Han / Liu, Xiang / Zhao, Yan-Hua / Bouchaïr, Abdelhamid	Load-carrying capacity of dowelled joints with slotted-in steel plate loaded at an angle to the grain	350-359
Al-Attraqchi, Ali Y. / Hashemi, M. Javad / Al-Mahaidi, Riadh	Loss assessment of rigid-frame bridges under horizontal and vertical ground motions	243-259
Aziz, Waqas / Aslam, Muhammad / Ejaz, Muhammad Fahad / Jahanzaib Ali, M. / Ahmad, Riaz / Wajeeh-ul-Hassan Raza, M. / Khan, Azam	Mechanical properties, drying shrinkage and structural performance of coconut shell lightweight concrete	26-35
Etedali, Sadegh / Kareshk, Mostafa Khosravi	Mitigation of torsional responses in asymmetric base-isolated structures using an optimal distribution of isolators in base story	807-817
Tahiri, Mohamed / Khamlichi, Abdellatif / Bezzazi, Mohammed	Nonlinear analysis of the ballast influence on the train-bridge resonance of a simply supported railway bridge	303-313
Zhang, Ai-Lin / Wang, Han-Wen / Jiang, Zi-qin / Guo, Kang / Niu, Zi-yao	Numerical simulation analysis of double yield points assembled buckling-restrained brace with replaceable inner core	1278-1294
Irvani, Mohammad / Ezati, Hossein / Khafajeh, Ramin / Kalat Jaari, Vahid Reza	Numerically study on the seismic response of partially restrained moment connection with structural fuse T-stub for European sections	82-105
Li, Hao / Wang, Libin / Wei, Yang / Wang, Brad Jianhe	Off-axis compressive behavior of cross-laminated bamboo and timber wall elements	452-468
Malomo, Daniele / DeJong, Matthew J.	Post-fire collapse assessment of the bank buildings (Belfast, UK) masonry façade via discrete element macro-analysis	1002-1009
Qi, Ai / Liu, Xuhong / Xu, Rongjian / Yan, Xueyuan	A precast beam-column joint using an innovative friction damper as a connector: Experimental and numerical study	968-989
Alsalman, Ali / Kareem, Rahman / Dang, Canh N. / Martí-Vargas, José R. / Hale, W. Micah	Prediction of modulus of elasticity of UHPC using maximum likelihood estimation method	1308-1320
Arabshahi, Alireza / Tavakol, Masoumeh / Sabzi, Javad / Gharaei-Moghaddam, Nima	Prediction of the effective moment of inertia for concrete beams reinforced with FRP bars using an evolutionary algorithm	684-705
Nassiraei, Hossein / Rezadoost, Pooya	Probabilistic analysis of the SCFs in tubular T/Y-joints reinforced with FRP under axial, in-plane bending, and out-of-plane bending loads	1078-1097
Zhao, Dahai / Wang, Huiwei / Wang, Ding / Zhu, Ruiguang / Zhang, Jinghui	Quantitative classification of near-fault ground motions selected by energy indicators	780-791
Liu, Zhengnan / Chen, Xingchong / Ding, Mingbo / Zhang, Xiyin / Lu, Jinhua	Quasi-static test of the gravity railway bridge pier with a novel preventative seismic strengthening technique	68-81
Melhem, Mayer M. / Caprani, Colin C. / Stewart, Mark G.	Reliability updating of partial factors for empirical codes: Application to Super-T PSC girders designs at the ultimate limit state in bending	233-242
Li, Junru / Lu, Xiang / Chen, Jiankang / Yang, Songlin / Kuang, Chufeng / Fan, Yong / Hu, Kongzhong	Reliability-monitoring data coupled model for concrete slab safety evaluation of CFRD and its engineering application	520-530
Tingting, Lu / Hao, Zhou / Xingwen, Liang	Research on the mechanical properties of the joint of the beam-column subassembly	873-881
Ding, Yao / Yu, Kequan / Li, Mi	A review on high-strength engineered cementitious composites (HS-ECC): Design, mechanical property and structural application	903-921
Fan, Junchao / Zhao, Junhai / Hua, Linwei / Zhang, Dongfang / Chen, Rongbo / Kang, Yanbiao	Seismic performance and analytical model of CFDST joint with endplates and long bolts	483-499
Zhang, Ying / Zhang, Hongmei / Lu, Xilin	Seismic performance evaluation and experimental validation of steel-fiber-reinforced high-strength-concrete composite shear walls	765-779
Gu, Yitong / Guo, Junjun / Dang, Xinzhi / Yuan, Wancheng	Seismic performance of a cable-stayed bridge crossing strike-slip faults	289-302
Chan, Ricky W. K. / Tang, Waiching	Serviceability conditions of friction dampers for seismic risk mitigations	500-510
Lu, Linfeng / Wang, Di / Wang, Wei / Wu, Hanheng / Ding, Kai / Kumah Darkwah, Kojo / Yan, Hongwei	Shear bearing capacity of Self-drilling screw group connections of CFS sheets	160-171
Mansouri, Ali / Najafi, Hasan	Simplified shear force-chord rotation relationship for concrete-filled steel plate composite coupling beams	1-14
Chen, Zhihua / Ma, Rui / Du, Yansheng / Wang, Xiaodun	State-of-the-art review on research and application of original bamboo-based composite components in structural engineering	1010-1029
Hassan, Maha M.	State-of-the-art review: Reduction factor of traditional steel moment resisting, braced or eccentrically braced systems	734-747
Ebanesar, Arunraj / Gladston, Hemalatha / Farsangi, Ehsan Noroozinejad / Sharma, Samurailatpam Vivekananda	Strengthening of RC beam-column joints using steel plate with shear connectors: Experimental investigation	1138-1150
Xu, Feng / Zhang, Xiyin / Xia, Xiushen / Shi, Jun	Study on seismic behavior of a self-centering railway bridge pier with sacrificial components	958-967
Ullah, Kiffayat / Qureshi, Muhammad Irshad / Ahmad, Afnan / Ullah, Zeeshan	Substitution potential of plastic fine aggregate in concrete for sustainable production	622-637
López López, David / Roca, Pere / Liew, Andrew / Méndez Echenagucia, Tomás / Van Mele, Tom / Block, Philippe	A three-dimensional approach to the Extended Limit Analysis of Reinforced Masonry	1062-1077
Karimipour, Arash / de Brito, Jorge / Ghalehnovi, Mansour / Gencel, Osman	Torsional behaviour of rectangular high-performance fibre-reinforced concrete beams	511-519
Xie, Yazhou / Ning, Chunxiao / Sun, Lijun	The twenty-first century of structural engineering research: A topic modeling approach	577-590
Sony, Sandeep / Gamage, Sunanda / Sadhu, Ayan / Samarabandu, Jagath	Vibration-based multiclass damage detection and localization using long short-term memory networks	436-451

About this
data sheet
IssueID
60015
Published on:
30/11/2021
Last updated on:
09/05/2022

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Structures - January 2022

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Structures - January 2022

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.