Structures - Januar 2022

Erschienen:	Januar 2022

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Wu, Bitao / Zhou, Yujian / Yin, Xiang / Lin, Zucai / Zhou, Zhenwei	The anti-arch inhibition effect of multispan continuous girder bridge strengthened with prestressed CFRP plates	845-855
Anuradha, V. / Ch.Madhavi, T.	Behaviour of self compacting concrete hybrid fiber reinforced hollow beams	990-1001
Hassan, Haysam S. / Elkhatib, Ali A. / Ahmed, Mohamed M. / Al-Tamimi, Adil K.	Behaviour of self-repaired reinforced concrete beams made using smart materials under static cyclic loads (shear study)	406-420
Zhang, Jiawei / Li, Hang / Liu, Shengwei / Zhang, Xiangyan / Yang, Chenghong / Zhang, Rongling	Bond behavior of the CFRP-concrete interface under combined sustained load and sulfate erosion	551-564
Kazemianfar, Behzad / Nami, Mohammad Rahim	Can a 3D woven GFRP composite really provide better impact resistance compared to a 2D woven GFRP composite at all of the thicknesses?	36-45
Liu, Wei / Ikago, Kohju	Causal implementation of rate-independent linear damping for the seismic protection of low-frequency structures	274-288
Liu, Jian / Gao, Ziyue	A comparative study of models for shear strength of reinforced concrete T-beams	922-930
Zhong, Jiwei / Gou, Hongye / Zhao, Hu / Zhao, Tianqi / Wang, Xiang	Comparison of several model updating methods based on full-scale model test of track beam	46-54
Solahuddin, B. A.	A critical review on experimental investigation and finite element analysis on structural performance of kenaf fibre reinforced concrete	1030-1061
Zhao, X. Y. / Zhang, H. Y. / Wu, B. / Jin, H. M. / Leung, K. T. / Lau, L. S. / Lee, K. H.	Cyclic behavior of non-seismically detailed full-scale exterior beam-column subassemblies with setback in columns	531-550
Torra-Bilal, Ines / Mahamid, Mustafa / Baran, Eray	Cyclic behaviour of precast beam-to-column connections: An experimental and numerical investigation	939-957
Chen, Guo / Wu, Xintao / Jiang, Hao / Wang, Zhenguo / Yin, Mingyang	Cyclic response of laminated bamboo lumber nailed connection: Theoretical modelling and experimental investigations	118-131
Das, Subhajit / Dhang, Nirjhar	Damage identification of structures using incomplete mode shape and improved TLBO-PSO with self-controlled multi-stage strategy	1101-1124
Lu, Chunhua / Bu, Senzhuang / Zheng, Yulong / Kosa, Kenji	Deterioration of concrete mechanical properties and fracture of steel bars caused by alkali-silica reaction: A review	893-902
Hadigheh, S. Ali / Ke, Feihu / Fatemi, Hamid	Durability design criteria for the hybrid carbon fibre reinforced polymer (CFRP)-reinforced geopolymer concrete bridges	325-339
Naghipour, Morteza / Ahmadi, Mohsen / Nematzadeh, Mahdi	Effect of concrete confinement level on load-bearing capacity of steel-reinforced concrete (SRC) columns under eccentric loading: Experiment and FEA model	202-213
Xu, Fan / Wang, Sheliang / Li, Tao / Li, Zhijun	Effect of metakaolin on the mechanical properties and pore characteristics of fiber-reinforced tailing recycled aggregate concrete	15-25
Yilmaz, Tolga / Anil, Özgür / Erdem, R. Tuğrul	Experimental and numerical investigation of impact behavior of RC slab with different opening size and layout	818-832
Zekavati, Ali Asghar / Jafari, Mohammad Ali / Saeedi, Ali	Experimental and numerical investigation on the structural performance of a novel type of pultruded composite cross-arm for power transmission towers	833-844
Xue, Jianyang / Liang, Xuanwen / Wu, Chenwei / Song, Dejun / Qi, Liangjie	Experimental and numerical study on eccentric compression performance of Dou-Gong brackets at column tops	608-621
Cheng, Chen / Wan, Shui / Song, Aiming	Experimental and numerical study on the mechanical properties of embedded double-row-pins connectors	214-232
Yuan, Lin / Zhang, Qilin / Ouyang, Yuanwen	Experimental investigation and design method of the flexural buckling resistance of high-strength aluminum alloy H-columns	1339-1349
Boostani, Maryam / Rezaifar, Omid / Gholhaki, Majid	Experimental investigation of a new lateral bracing system called OGrid under cyclic loading	172-191
El-Zohairy, Ayman / Salim, Hani / Shaaban, Hesham	Experimental investigation on fatigue behavior of composite beams with different studs arrangements	146-159
Said, AbdulMuttalib. I. / Mabrook Mouwainea, Enas	Experimental investigation on reinforced concrete slabs under high-mass low velocity repeated impact loads	314-324
Qiao, Huiyun / Zhang, Mingfeng / Liu, Zhongcun / Chen, Yu / Qiu, Huasheng / Wang, Zheng	Experimental investigation on square steel tubular columns with initial crack defects	388-405
Han, Guoqing / Jiang, Lizhong / Xu, Min	Experimental investigation on the flexural-shear performance of railway short piers	792-806
Tan, Ji-Ke / Su, Mei-Ni / Wang, Yu-Hang / Wang, Kang / Cao, Yun-Qi / Li, Peng	Experimental study on cyclic shear performance of steel plate shear wall with different buckling restraints	469-482
Feng, Ran / Zhang, Jingzhou / Li, Yanwen / Zhu, Ji-Hua	Experimental study on hysteretic behavior for corroded circular RC columns retrofitted by ICCP-SS	421-435
Junaid, M. Talha / Karzad, Abdul Saboor / Elbana, Abdalla / Altoubat, Salah	Experimental study on shear response of GFRP reinforced concrete beams strengthened with externally bonded CFRP sheets	1295-1307
Li, Ming / Yao, Lingbo / He, Liusheng / Mao, Xiaoyong / Li, Guojian	Experimental study on the compressive behavior of concrete filled steel tubular columns with regional corrosion	882-892
Huang, Wei / Hu, Gaoxing / Zhang, Jiarui	Experimental study on the seismic performance of new precast concrete beam-column joints with replaceable connection	856-872
Bonopera, Marco / Liao, Wen-Cheng / Perceka, Wisena	Experimental–theoretical investigation of the short-term vibration response of uncracked prestressed concrete members under long-age conditions	260-273
Zhao, Lin / Cui, Wei / Shen, Xiaomin / Xu, Shengyi / Ding, Yejun / Ge, Yaojun	A fast on-site measure-analyze-suppress response to control vortex-induced-vibration of a long-span bridge	192-201
Khalid Ali, Omar / Al-Hadithi, Abdulkader Ismail / Noaman, Ahmed Tareq	Flexural performance of layered PET fiber reinforced concrete beams	55-67
Zhou, Linyun / Wan, Shui	Full-range nonlinear analysis of post-tensioned anchorage zones based on modified strut-and-tie model	565-576
Liu, Kun / Chen, Wei / Ye, Jihong / Jiang, Jian	Full-scale fire and postearthquake fire experiments of CFS walls with new configurations	706-721
Chandrasekaran, Srinivasan / Hari, S. / Amirthalingam, Murugaiyan	Functionally graded materials for marine risers by additive manufacturing for high-temperature applications: Experimental investigations	931-938
Huang, Xiaogang / Li, Bikun / Zhou, Xuhong / Wang, Yuhang / Zhu, Ronghua	Geometric optimisation analysis of Steel–Concrete hybrid wind turbine towers	1125-1137
Rad, Mohammad Javad Ghasemi / Ohadi, Sima / Jafari-Asl, Jafar / Vatani, Arash / Ahmadabadi, Sanaz Afzali / Correia, José A. F. O.	GNDO-SVR: An efficient surrogate modeling approach for reliability-based design optimization of concrete dams	722-733
He, Jun / Suwaed, Ahmed S. H. / Vasdravellis, George	Horizontal pushout tests and parametric analyses of a locking-bolt demountable shear connector	667-683
Suzuki, Atsushi / Fujita, Tomomi / Kimura, Yoshihiro	Identifying damage mechanisms of gymnasium structure damaged by the 2011 Tohoku earthquake based on biaxial excitation	1321-1338
Gusella, Federico / Orlando, Maurizio / Peterman, Kara D.	The impact of variability and combined loads on fuses in braced frames	650-666
Liu, Ziyi / Lu, Zhenzhou / Ling, Chunyan / Feng, Kaixuan / Hu, Yingshi	An improved AK-MCS for reliability analysis by an efficient and simple reduction strategy of candidate sample pool	373-387
Kaveh, Ali / Biabani Hamedani, Kiarash	Improved arithmetic optimization algorithm and its application to discrete structural optimization	748-764
Zahra, Tatheer / Asad, Mohammad / Thamboo, Julian / Noor-E-Khuda, Sarkar / Derakhshan, Hossein	Influence of restrainer bar chairs on the compression and flexural behaviour of reinforced masonry walls	360-372
Rooshenas, Arash	Investigating the effects of masonry infill panels on high-rise structures	106-117
Cai, Chenzhi / Huang, Shiji / He, Xuhui / Zhou, Tieming / Zou, Yunfeng	Investigation of concrete box girder positive temperature gradient patterns considering different climatic regions	591-607
Nejad, Reza Masoudi / Ghahremani Moghadam, Danial / Hadi, Meisam / Zamani, Pedram / Berto, Filippo	An investigation on static and fatigue life evaluation of grooved adhesively bonded T-joints	340-349
Ji, Xin-Lin / Zhu, Li / Su, Ray Kai-Leung / Wang, Guang-Ming	Lateral overturning process and failure mechanism of curved steel-concrete composite box-girder bridges under specific overloading vehicles	638-649
Xu, Bo-Han / Liu, Xiang / Zhao, Yan-Hua / Bouchaïr, Abdelhamid	Load-carrying capacity of dowelled joints with slotted-in steel plate loaded at an angle to the grain	350-359
Al-Attraqchi, Ali Y. / Hashemi, M. Javad / Al-Mahaidi, Riadh	Loss assessment of rigid-frame bridges under horizontal and vertical ground motions	243-259
Aziz, Waqas / Aslam, Muhammad / Ejaz, Muhammad Fahad / Jahanzaib Ali, M. / Ahmad, Riaz / Wajeeh-ul-Hassan Raza, M. / Khan, Azam	Mechanical properties, drying shrinkage and structural performance of coconut shell lightweight concrete	26-35
Etedali, Sadegh / Kareshk, Mostafa Khosravi	Mitigation of torsional responses in asymmetric base-isolated structures using an optimal distribution of isolators in base story	807-817
Tahiri, Mohamed / Khamlichi, Abdellatif / Bezzazi, Mohammed	Nonlinear analysis of the ballast influence on the train-bridge resonance of a simply supported railway bridge	303-313
Zhang, Ai-Lin / Wang, Han-Wen / Jiang, Zi-qin / Guo, Kang / Niu, Zi-yao	Numerical simulation analysis of double yield points assembled buckling-restrained brace with replaceable inner core	1278-1294
Irvani, Mohammad / Ezati, Hossein / Khafajeh, Ramin / Kalat Jaari, Vahid Reza	Numerically study on the seismic response of partially restrained moment connection with structural fuse T-stub for European sections	82-105
Li, Hao / Wang, Libin / Wei, Yang / Wang, Brad Jianhe	Off-axis compressive behavior of cross-laminated bamboo and timber wall elements	452-468
Malomo, Daniele / DeJong, Matthew J.	Post-fire collapse assessment of the bank buildings (Belfast, UK) masonry façade via discrete element macro-analysis	1002-1009
Qi, Ai / Liu, Xuhong / Xu, Rongjian / Yan, Xueyuan	A precast beam-column joint using an innovative friction damper as a connector: Experimental and numerical study	968-989
Alsalman, Ali / Kareem, Rahman / Dang, Canh N. / Martí-Vargas, José R. / Hale, W. Micah	Prediction of modulus of elasticity of UHPC using maximum likelihood estimation method	1308-1320
Arabshahi, Alireza / Tavakol, Masoumeh / Sabzi, Javad / Gharaei-Moghaddam, Nima	Prediction of the effective moment of inertia for concrete beams reinforced with FRP bars using an evolutionary algorithm	684-705
Nassiraei, Hossein / Rezadoost, Pooya	Probabilistic analysis of the SCFs in tubular T/Y-joints reinforced with FRP under axial, in-plane bending, and out-of-plane bending loads	1078-1097
Zhao, Dahai / Wang, Huiwei / Wang, Ding / Zhu, Ruiguang / Zhang, Jinghui	Quantitative classification of near-fault ground motions selected by energy indicators	780-791
Liu, Zhengnan / Chen, Xingchong / Ding, Mingbo / Zhang, Xiyin / Lu, Jinhua	Quasi-static test of the gravity railway bridge pier with a novel preventative seismic strengthening technique	68-81
Melhem, Mayer M. / Caprani, Colin C. / Stewart, Mark G.	Reliability updating of partial factors for empirical codes: Application to Super-T PSC girders designs at the ultimate limit state in bending	233-242
Li, Junru / Lu, Xiang / Chen, Jiankang / Yang, Songlin / Kuang, Chufeng / Fan, Yong / Hu, Kongzhong	Reliability-monitoring data coupled model for concrete slab safety evaluation of CFRD and its engineering application	520-530
Tingting, Lu / Hao, Zhou / Xingwen, Liang	Research on the mechanical properties of the joint of the beam-column subassembly	873-881
Ding, Yao / Yu, Kequan / Li, Mi	A review on high-strength engineered cementitious composites (HS-ECC): Design, mechanical property and structural application	903-921
Fan, Junchao / Zhao, Junhai / Hua, Linwei / Zhang, Dongfang / Chen, Rongbo / Kang, Yanbiao	Seismic performance and analytical model of CFDST joint with endplates and long bolts	483-499
Zhang, Ying / Zhang, Hongmei / Lu, Xilin	Seismic performance evaluation and experimental validation of steel-fiber-reinforced high-strength-concrete composite shear walls	765-779
Gu, Yitong / Guo, Junjun / Dang, Xinzhi / Yuan, Wancheng	Seismic performance of a cable-stayed bridge crossing strike-slip faults	289-302
Chan, Ricky W. K. / Tang, Waiching	Serviceability conditions of friction dampers for seismic risk mitigations	500-510
Lu, Linfeng / Wang, Di / Wang, Wei / Wu, Hanheng / Ding, Kai / Kumah Darkwah, Kojo / Yan, Hongwei	Shear bearing capacity of Self-drilling screw group connections of CFS sheets	160-171
Mansouri, Ali / Najafi, Hasan	Simplified shear force-chord rotation relationship for concrete-filled steel plate composite coupling beams	1-14
Chen, Zhihua / Ma, Rui / Du, Yansheng / Wang, Xiaodun	State-of-the-art review on research and application of original bamboo-based composite components in structural engineering	1010-1029
Hassan, Maha M.	State-of-the-art review: Reduction factor of traditional steel moment resisting, braced or eccentrically braced systems	734-747
Ebanesar, Arunraj / Gladston, Hemalatha / Farsangi, Ehsan Noroozinejad / Sharma, Samurailatpam Vivekananda	Strengthening of RC beam-column joints using steel plate with shear connectors: Experimental investigation	1138-1150
Xu, Feng / Zhang, Xiyin / Xia, Xiushen / Shi, Jun	Study on seismic behavior of a self-centering railway bridge pier with sacrificial components	958-967
Ullah, Kiffayat / Qureshi, Muhammad Irshad / Ahmad, Afnan / Ullah, Zeeshan	Substitution potential of plastic fine aggregate in concrete for sustainable production	622-637
López López, David / Roca, Pere / Liew, Andrew / Méndez Echenagucia, Tomás / Van Mele, Tom / Block, Philippe	A three-dimensional approach to the Extended Limit Analysis of Reinforced Masonry	1062-1077
Karimipour, Arash / de Brito, Jorge / Ghalehnovi, Mansour / Gencel, Osman	Torsional behaviour of rectangular high-performance fibre-reinforced concrete beams	511-519
Xie, Yazhou / Ning, Chunxiao / Sun, Lijun	The twenty-first century of structural engineering research: A topic modeling approach	577-590
Sony, Sandeep / Gamage, Sunanda / Sadhu, Ayan / Samarabandu, Jagath	Vibration-based multiclass damage detection and localization using long short-term memory networks	436-451

Über diese
Datenseite
IssueID
60015
Veröffentlicht am:
30.11.2021
Geändert am:
09.05.2022

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Structures - Januar 2022

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Structures - Januar 2022

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.