Structures - December 2021

Published:	December 2021

Articles in this Issue

Author(s)	Title	Page(s)
Rajanayagam, Heshachanaa / Poologanathan, Keerthan / Gatheeshgar, Perampalam / Varelis, George E. / Sherlock, Paul / Nagaratnam, Brabha / Hackney, Phil	A-State-Of-The-Art review on modular building connections	1903-1922
Dey, Abhijeet / Sil, Arjun	Advanced corrosion-rate model for comprehensive seismic fragility assessment of chloride affected RC bridges located in the coastal region of india	947-963
Aguib, S. / Chikh, N. / Kobzili, L. / Djedid, T. / Nour, A. / Meloussi, M.	Analysis of buckling stability behavior of hybrid plate using Ritz approach and numerical simulation	3222-3237
Mijušković, Olga / Žugić, Ljiljana / šćepanović, Biljana / Ćorić, Branislav	Analysis of the impact of shear stress at the flange-web junction on the web behavior under concentrated and patch load	3931-3944
Ali, Shehroze / Ahmad, Junaid / Sheikh, M. Neaz / Yu, Tao / Hadi, Muhammad N. S.	Analytical load-moment (P-M) interaction diagrams of GFRP bar reinforced circular geopolymer concrete columns	2445-2454
Zahra, Tatheer / Thamboo, Julian / Asad, Mohammad / Song, Mengli	Analytical stress–strain model of reinforced concrete masonry wallettes under axial compression	2922-2935
Lu, Kaiwei / Xu, Qizhi / Wang, Mingdong / Yao, Yiming / Wang, Jingquan	Anchorage performance of bolt connection embedded in thin UHPC members	1253-1260
Hadzima-Nyarko, Marijana / Ademović, Naida / Krajnović, Marija	Architectural characteristics and determination of load-bearing capacity as a key indicator for a strengthening of the primary school buildings: Case study Osijek	3996-4011
Sahadan, Siti Norbaya / Abdullah, Shahrum / Arifin, Azli / Karam Singh, Salvinder Singh	Assessing the magnetic flux leakage contraction parameters for the fatigue life prediction of SAE1045 steel specimens	4077-4085
Alabi-Bello, M. A. / Wang, Y. C. / Su, M.	An assessment of different direct strength methods for cold-formed thin-walled steel beam-columns under compression and major axis bending	4788-4802
Guo, Qi / Sun, Yanbo / Mi, Tao	Assessment on long-term deflection of concrete beam bridges based on uncertainty quantification method	3013-3027
Basaglia, A. / Cianchino, G. / Cocco, G. / Rapone, D. / Terrenzi, M. / Spacone, E. / Brando, G.	An automatic procedure for deriving building portfolios using the Italian "CARTIS" online database	2974-2986
Su, Rong / Li, Xian / Zhong, Tao / Zhou, Tao	Axial behavior of novel CFDST columns with outer welded corrugated steel tubes	2708-2720
Chen, Zhihua / Zi, Zhenyu / Zhou, Ting / Wu, Yapeng	Axial compression stability of thin double-steel-plate and concrete composite shear wall	3866-3881
Memarzadeh, Armin / Nematzadeh, Mahdi	Axial compressive performance of steel reinforced fibrous concrete composite stub columns: Experimental and theoretical study	2455-2475
Zhang, Zhuangnan / Wang, Chungang / Cheng, Daye / Hao, Guanwang / Yu, Lan	Behavior and design of axially loaded web-stiffened stud walls	401-412
Wang, Huailiang / Wu, Yuhui / Qin, Xiaoliang / Li, Lei / Chen, Huihua / Cheng, Baoquan	Behavior of cement concrete confined by fabric-reinforced geopolymer mortar under monotonic and cyclic compression	4731-4744
Pan, Jianrong / Huang, Ruike / Xu, Jing / Wang, Peng / Wang, Zhan / Chen, Jin	Behavior of exposed column-base connections with four internal anchor bolts under seismic loading	105-119
Batran, Tayseer Z. / Ismail, Mohamed K. / Hassan, Assem A. A.	Behavior of novel hybrid lightweight concrete composites under drop-weight impact loading	2789-2800
Jia, Lianguang / Li, Qiurong / Bi, Ran / Dong, Yang	Behaviour of castellated beam-to-column end-plate connection under monotonic load	4616-4633
Zhao, Zhongwei / Dai, Bozhi / Xu, Hao / Li, Tianhe	Bending capacity of corroded welded hollow spherical joints with considering interaction of tension force and bending moment	2656-2664
Amponsah, Evans / Wang, Zhenyu / Kwame Mantey, Selase	Bending-bearing behaviour of embedded steel ring-foundation connection of onshore wind turbines	180-197
Gravina, Rebecca J. / Xie, Tianyu / Roychand, Rajeev / Zhuge, Yan / Ma, Xing / Mills, Julie E. / Youssf, Osama	Bond behaviour between crumb rubberized concrete and deformed steel bars	2115-2133
Lu, Jennifer / Afefy, Hamdy M. / Azimi, Hossein / Sennah, Khaled / Sayed-Ahmed, Mahmoud	Bond performance of sand-coated and ribbed-surface glass fiber reinforced polymer bars in high-performance concrete	10-19
Lv, Xiaoyong / Yu, Zhiwu / Shan, Zhi	Bond stress-slip model for rebar-concrete interface under monotonic and cyclic loading	498-506
Degtyarev, V. V. / Naser, M. Z.	Boosting machines for predicting shear strength of CFS channels with staggered web perforations	3391-3403
Ren, Chong / Liu, Xiaowei / He, Wenfu / Dai, Liusi	Buckling analyses of cold-formed steel Sigma sections in purlin-sheeting systems subjected to uniformly distributed uplift loading	2262-2275
Deng, Yanzhi / Zhou, Shurong / Li, Jingyao / Nie, Shidong / Liu, Peng	Buckling behaviour of Q460GJ welded H-section columns subjected to minor axis under axial compression	1416-1428
Deepak, M. S. / Ananthi, G. Beulah Gnana	Buckling capacities of Double-T-Box Girders – A numerical approach	4574-4595
Zhao, Caiqi / Zhou, Yunwen / Wang, Gang / Li, Haoyue / Wang, Yating	Calculation method of the bearing capacity of a novel modular joint of an aluminium alloy lattice shell structure	3268-3282
Cheng, Shitao / He, Haoxiang / Lan, Bingji	Calculation theory and damage analysis on crack width of RC seismic-damaged columns	3329-3344
Ribeiro, D. / Calçada, R. / Brehm, M. / Zabel, V.	Calibration of the numerical model of a track section over a railway bridge based on dynamic tests	4124-4141
Dabbaghi, Farshad / Sadeghi-Nik, Aref / Libre, Nicolas Ali / Nasrollahpour, Sepideh	Characterizing fiber reinforced concrete incorporating zeolite and metakaolin as natural pozzolans	2617-2627
Veggalam, Sahithi / Karthik Reddy, K. S. K. / Somala, Surendra Nadh	Collapse fragility due to near-field directivity ground motions: Influence of component, rupture distance, hypocenter location	3684-3702
Li, Lijun / Wang, Rui / Zhao, Hui / Zhang, Haoran / Yan, Rui	Combined effects of elevated temperatures and high strain rates on compressive performance of S30408 austenitic stainless steel	1-9
Jiménez-Alonso, Javier Fernando / Soria, José Manuel / Díaz, Iván M. / Guillen-González, Francisco	A common framework for the robust design of tuned mass damper techniques to mitigate pedestrian-induced vibrations in lively footbridges	1276-1290
Chen, Xuebin / Xu, Guoji / Lin, Chong / Sun, Hongwei / Zeng, Xiaofang / Chen, Zhengdong	A comparative study on lateral displacements of movable T-deck and Box-deck under solitary waves	1614-1635
Yang, Yekai / Wu, Chengqing / Liu, Zhongxian / Qin, Yuan / Wang, Weiqiang	Comparative study on square and rectangular UHPFRC-Filled steel tubular (CFST) columns under axial compression	2054-2068
Mirra, Gabriele / Pugnale, Alberto	Comparison between human-defined and AI-generated design spaces for the optimisation of shell structures	2950-2961
Ahmed, Mizan / Tran, Viet-Linh / Ci, Junchang / Yan, Xi-Feng / Wang, Fangying	Computational analysis of axially loaded thin-walled rectangular concrete-filled stainless steel tubular short columns incorporating local buckling effects	4652-4668
Hosseini, Mojtaba / Ahmadie Amiri, Hossein / Estekanchi, Homayoon E.	Consistent one-bay frame simplified model for efficient seismic evaluation of steel moment frame buildings with equal and unequal bay lengths	3345-3362
Jiao, Jinfeng / Liu, Zhanxiang / Guo, Qi / Liu, Yong / Lei, Honggang	Constant-amplitude fatigue behavior of M24 high-strength bolt of end-plate flange connection	2041-2053
Li, Rou / Miao, Changqing / Zhang, Yili / Wang, Yichun / Chen, Xianliang	Corrosion characteristics and damage constitutive model of galvanized steel wires for bridge cables	3414-3426
Couto, Carlos / Coderre, Tristan / Real, Paulo Vila / Boissonnade, Nicolas	Cross-section capacity of RHS and SHS at elevated temperatures: Comparison of design methodologies	198-214
Liu, H. Q. / Liu, Y. Z. / Huo, J. S. / Zhu, D. J.	Cyclic behaviour of a novel steel beam-to-prefabricated CFST column connection with threaded sleeve bolts	615-629
Li, Beibei / Wang, Jingfeng / Duan, Mengjun / Guo, Lei / Wang, Bo	Cyclic experimental and numerical analytical investigation of precast concrete frames with buckling-restrained braces considering various assembling connections	1135-1153
Wang, Yuke / Han, Musen / Cao, Tiancai / Yu, Xiang / Song, Yingbin	Cyclic interface behavior of non-water reactive polymer and concrete during dam restoration	748-757
He, Haoxiang / Chen, Yifei / Lan, Bingji	Damage assessment for structure subjected to earthquake using wavelet packet decomposition and time-varying frequency	449-461
Huang, He / Wang, Yifan / Li, Yugang	Damage assessment of single-layer reticulated domes subjected to mainshock-aftershock sequences based on structural damage factor	604-614
Li, R. W. / Wu, H. / Fang, Q. / Wang, D. F.	Damage evaluation and performance-based design of double-pier RC bridge subjected to vehicle collision	3141-3154
Liu, Gang / Jiang, Wei / Yang, Qingshan / Wang, Qi / Law, S. S.	Decentralized state feedback control of linear time-invariant system with free-interface substructures	4908-4919
Nguyen, Thanh Q.	A deep learning platform for evaluating energy loss parameter in engineering structures	1326-1345
Figueira, Diogo / Ashour, Ashraf / Yıldırım, Gürkan / Aldemir, Alper / Şahmaran, Mustafa	Demountable connections of reinforced concrete structures: Review and future developments	3028-3039
Jing, Zhao / Sun, Qin / Liang, Ke / Zhang, Yongjie	Design of curved composite panels for maximum buckling load using sequential permutation search algorithm	4169-4192
Bishay, Peter L. / Amirbekyan, Arshak J.	Design of periodic laminated composite beams in free vibration	2030-2040
Haghgou, Hossein / Alembagheri, Mohammad / Bigdeli, Ali	Determination of optimal intensity measure for probabilistic seismic demand analysis of intake towers	1998-2013
Meral, Emrah	Determination of seismic isolation effects on irregular RC buildings using friction pendulums	3436-3452
Talaeitaba, Sayed Behzad / Safaie, Mohamad / Zamani, Reza	Development and application of a new base isolation system in low-rise buildings	1684-1709
Shahiditabar, Akbar / Moharrami, Hamid	Development and experimental verification of self-centered y-shaped braced frame	1312-1325
Mello, Andre Felipe Aparecido / Mouta Trautwein, Leandro / Almeida, Luiz Carlos / Souza, Rafael Alves	Development of an open source library for reinforced concrete membrane element analysis	4882-4891
Malla, Niraj / Wijeyewickrema, Anil C.	Direct displacement-based design of coupled walls with steel shear link coupling beams	2746-2764
Artar, Musa / Carbas, Serdar	Discrete sizing design of steel truss bridges through teaching-learning-based and biogeography-based optimization algorithms involving dynamic constraints	3533-3547
Bradley, Cameron R. / Fahnestock, Larry A. / Hines, Eric M.	Dual system design for a low-ductility concentrically braced frame with a reserve moment frame	3315-3328
Nochebuena-Mora, Elesban / Mendes, Nuno / Lourenço, Paulo B. / Greco, Federica	Dynamic behavior of a masonry bell tower subjected to actions caused by bell swinging	1798-1810
Briseghella, Bruno / Fa, Guanzhe / Aloisio, Angelo / Pasca, Dag / He, Leqia / Fenu, Luigi / Gentile, Carmelo	Dynamic characteristics of a curved steel–concrete composite cable-stayed bridge and effects of different design choices	4669-4681
Pap, Zsuzsa B. / Kollár, László P.	The dynamic response of infinitely long constrained bars and its application for modelling SSI	875-885
Bao, Enhe / Tang, Zuhong / Liu, Huijuan / Li, Qi	Dynamic response of multi-story buckling-restrained braced steel frames with different β values	2308-2317
Li, Huile / Wang, Tianyu / Wu, Gang	Dynamic response prediction of vehicle-bridge interaction system using feedforward neural network and deep long short-term memory network	2415-2431
Liu, Kaifang / Liu, Lulu / Zhu, Qiankun / Liu, Yanhui / Zhou, Fulin	Dynamic testing and numerical simulation of human-induced vibration of cantilevered floor with tuned mass dampers	1475-1488
Bagheri, Mansour / Hosseini, Seyed Abbas / Keshtegar, Behrooz	Dynamical relaxed directional method for fuzzy reliability analysis	169-179
Fu, Qiang / Xu, Wenrui / Bu, Mengxin / Guo, Bingbing / Niu, Ditao	Effect and action mechanism of fibers on mechanical behavior of hybrid basalt-polypropylene fiber-reinforced concrete	3596-3610
Sonkar, Chanchal / Bhattacharyya, Sriman Kumar / Mittal, Achal Kumar	Effect of axial loading on cold-formed steel wall panels with fibre-cement and calcium silicate boards sheathing: Experimental and analytical studies	2218-2242
Güllü, Ahmet / Karameşe, Genco	Effect of building importance factor on seismic performance of rc frame type shopping malls subjected to pulse-like records	158-168
Prasanth, S. / Ghosh, Goutam	Effect of cracked section properties on the resilience based seismic performance evaluation of a building	1021-1033
Karimipour, Arash / Farhangi, Visar	Effect of EBR- and EBROG-GFRP laminate on the structural performance of corroded reinforced concrete columns subjected to a hysteresis load	1525-1544
Krishna, Arathi / Kaliyaperumal, Saravana Raja Mohan	Effect of elevated temperature on strength and ductility of axially loaded hybrid fiber reinforced concrete columns	3548-3556
Alothman, Aya / Mangalathu, Sujith / Hashemi, Javad / Al-Mosawe, Alaa / Alam, M. D. Morshed / Allawi, Abbas	The effect of ground motion characteristics on the fragility analysis of reinforced concrete frame buildings in Australia	3583-3595
Yavas, Altug / Ince, Mucahit	Effect of reinforcement ratio on flexural behavior of I-shaped UHPFRC beams	4457-4465
He, Jun / Xin, Haohui / Wang, Yingjun / Correia, José A. F. O.	Effect of temperature loading on the performance of a PC bridge in Oklahoma: Reliability analysis	51-60
He, Jun / Xin, Haohui / Wang, Yingjun / Correia, José A. F. O.	Effect of temperature loading on the performance of a prestressed concrete bridge in Oklahoma: Probabilistic modelling	1429-1442
Furtado, André / Rodrigues, Hugo / Arêde, António	Effect of the infill panels in the floor response spectra of an 8-storey RC building	2476-2498
Niknam, Behnam / Haji Aboutalebi, Farhad / Ma, Wenchen / Nejad, Reza Masoudi	Effect of variations internal pressure on cracking radiant coils distortion	4986-4998
Abdallah, Mohammad / Al Mahmoud, Firas / Khelil, Abdelouahab / Mercier, Julien	Efficiency of EB CFRP composites for flexural strengthening of continuous RC beams: A comparative study with NSM CFRP rods	1567-1588
Kaveh, Ali / Joudaki, Ali	Efficient analysis of block circulant structures	738-747
Majeed, Hakeem S. / Davids, William G. / Walton, Harold J.	Efficient second-order nonlinear finite-element simulation of concrete-filled FRP tubular arches	3738-3749
Movahedi Rad, Majid / Habashneh, Muayad / Lógó, János	Elasto-Plastic limit analysis of reliability based geometrically nonlinear bi-directional evolutionary topology optimization	1720-1733
Shao, Yahui / Wei, YuanYuan / Yang, Tao / Ni, Ming / Zhong, Jian	Empirical models of bridge seismic fragility surface considering the vertical effect of near-fault ground motions	2962-2973
Wang, Yonghui / Zhang, Rong / Liu, Suntao / Zhai, Ximei / Zhi, Xudong	Energy absorption behaviour of an aluminium foam-filled circular-triangular nested tube energy absorber under impact loading	95-104
Shabani, Mohammad Javad / Moghadam, Abdolreza Sarvghad / Aziminejad, Armin / Razzaghi, Mehran Seyed	Energy-based criteria for assessment of box-section steel columns against progressive collapse	2580-2591
Pu, Wuchuan / Wu, Ming	Energy-based estimation of ductility demand of slip-hysteretic timber house structures subjected to sequential earthquakes	4193-4203
Nawar, Mahmoud / Aboelfotouh, Mohamed / Eraky, Atef	Enhancing static resistance of steel stud wall systems for blast design using new section geometries	2367-2383
Farahani, Sina / Akhaveissy, Amir H. / Damkilde, Lars	Equivalent viscous damping for buckling-restrained braced RC frame structures	1229-1252
Cao, Yan / Zandi, Yousef / Rahimi, Abouzar / Petković, Dalibor / Denić, Nebojša / Stojanović, Jelena / Spasić, Boban / Vujović, Vuk / Khadimallah, Mohamed Amine / Assilzadeh, Hamid	Evaluation and monitoring of impact resistance of fiber reinforced concrete by adaptive neuro fuzzy algorithm	3750-3756
Tahmasebi, Amin / Rahimi, Mostafa	Evaluation of nonlinear static and dynamic analysis of steel braced frame buildings subjected to near-field earthquakes using FBD and DBD	1364-1372
Shi, Chen / Du, Yongfeng	Evaluation of the collapse mode of isolated structures subjected to multi-directional dynamic coupling excitation based on reliability theory	1261-1275
Luo, Qiang / Xu, Gang / Zhao, Juan / Wang, Qing	Evolution characteristics of secondary tensile mechanical properties of corroded rebars	3478-3486
Sabetifar, Hassan / Nematzadeh, Mahdi	An evolutionary approach for formulation of ultimate shear strength of steel fiber-reinforced concrete beams using gene expression programming	4965-4976
Joel Shelton, J. / Venkata Naresh, Y. / Arun Solomon, A. / Daniel, C.	Experimental and analytical investigation of geo-grid confined RC beams with glass fiber reinforced concrete	487-497
Hossain, Khandaker M. A. / Jahan, Asmah / Mol, Lukas	Experimental and analytical investigation on shear behavior of profiled steel sheet dry board composite wall system	3945-3957
BehkamRad, Kaveh / Azizi, Mahdi	Experimental and analytical investigations of a novel energy dissipation device for seismic protection of engineering structures	1201-1211
Yin, Fei / Wang, Ru-wei / Cao, Wan-lin / Zhao, Yang / Song, Yu	Experimental and analytical research on steel reinforced high-strength concrete columns with different steel sections	4350-4363
Mohamed, Ihab Ramadan Moustafa / Safar, Sherif Saleh	Experimental and numerical investigation on torsion strength of light gauge SHS strengthened with CFRP wraps	2818-2839
Chybiński, Marcin / Polus, Łukasz	Experimental and numerical investigations of aluminium-timber composite beams with bolted connections	1942-1960
Li, Shucai / Lu, Wei / Sun, Huibin / Luan, Yingcheng	Experimental and numerical research on fabricated joint for CFST set in underground construction	1291-1299
Tian, JianBo / Wang, Mengmeng / Liu, Jie / Guo, Hongchao / Wang, Zhenshan / Zhang, Junfa	Experimental and numerical study of continuous span concrete composite slabs	827-839
Siciliano, Alfio Francesco / Škec, Leo / Fossetti, Marinella / Jelenić, Gordan	Experimental and numerical study on the compressive behaviour of partially accessible concrete columns strengthened by a layer of high-performance concrete	4100-4112
Dabiri, Hamed / Kheyroddin, Ali	An experimental comparison of RC beam-column joints incorporating different splice methods in the beam	1603-1613
Gu, Yitong / Zhang, Changyong / Li, Huaifeng / Li, Han / Dang, Xinzhi / Yuan, Wancheng	Experimental evaluation of seismic performance of Coiled Cable Restrainer on bridges isolated by Unbonded laminated rubber bearings	3376-3390
Fadlelmola, A. Basit F. Alla / Chen, Zhihua / Du, Yansheng / Ma, Rui / Ma, Jia	Experimental investigation and design method on a lightweight bamboo-concrete sandwich panel under bending load	856-874
Naseri, Hamid / Showkati, Hossein / Zirakian, Tadeh	Experimental investigation of geometrical and physical behaviors of thin-walled steel tanks subjected to local support settlement	413-422
Davodikia, Behzad / Saghafi, Mohammad Hossein / Golafshar, Ali	Experimental investigation of grooving method in seismic retrofit of beam-column external joints without seismic details using CFRP sheets	4423-4434
Albutainy, Mohammed / Galal, Khaled	Experimental investigation of reinforced concrete masonry shear walls with C-shaped masonry units boundary elements	3667-3683
Rajabzadeh Gatabi, Hamed / Celikag, Murude / Bengar, Habib Akbarzadeh	Experimental investigation of steel fibers effect on the cyclic behavior of flexural members with moderate ductility	2530-2543
Chen, Fubin / Wang, Weijia / Zhou, Jinfang / Shu, Zhenru / Li, Qiusheng	Experimental investigation of wind pressure characteristics and aerodynamic optimization of a large-span cantilevered roof	303-313
Far, Harry / Nejadi, Shami	Experimental investigation on interface shear strength of composite PVC encased macro-synthetic fibre reinforced concrete walls	729-737
Yang, Jian / Liang, Shuting / Zhu, Xiaojun / Dang, Longji / Wang, Jialei / Tao, Jinxin	Experimental research and finite element analysis on the seismic behavior of CFRP-strengthened severely seismic-damaged RC columns	3968-3981
Zhang, Pu / Su, Yan-Li / Fan, Jia-Jun / Feng, Hu / Shao, Jinggan / Guo, Hui / Gao, Dan-Ying / Sheikh, Shamim Ahmed	Experimental research on the mechanical behavior of grouted sleeves with fiber-reinforced grouting material under cyclic loading	2189-2204
Xia, Kang / Hu, Xiang / Xue, Weichen	Experimental studies on in-plane connections of composite beam-precast concrete shear wall under reversed cyclic loading	1961-1972
Lun, Pei-Yuan / Lu, Zhao-Hui / Zhang, Xiao-Gang / Zhang, Qiang / Zhao, Ran	Experimental study and suggested mathematical model for chloride-induced reinforcement corrosion rate	2014-2029
Ahmadpour, F. / Zeinoddini, M. / Mo'tamedi, M. / Rashnooie, R.	Experimental study of fire effects on out-of-plane bending strength/flexibility of steel tubular T-joints	2174-2188
Li, Wanrun / Gao, Haiwang / Xiang, Rongjiang / Du, Yongfeng	Experimental study of seismic performance of precast shear wall with a new bolt-plate connection joint	3818-3833
Chen, Zhihua / Niu, Xiangyuan / Liu, Jiadi / Khan, Kashan	Experimental study of thin-walled steel-timber single-shear connection with a self-tapping screw	4389-4405
Ma, Jinfeng / Zhu, Jianing / Bai, Guoliang / Zheng, Wei	Experimental study on anchorage performance of steel bar-corrugated pipe grouted connection	1834-1842
Liu, Ruyan / Hua, Dongjie / Chen, Kejing	Experimental study on interaction between rock granular flow and different structural forms of rigid retaining walls	3557-3566
Xue, Weichen / Hu, Xinyu / Song, Jiazheng	Experimental study on seismic behavior of precast concrete beam-column joints using UHPC-based connections	4867-4881
Dong, Yang / Jia, Lianguang / Xu, Feng / Li, Xianchao	Experimental study on seismic behavior of steel structure with cellular beams and composite concrete slab	507-522
Eskandari Nasab, Mohammad Seddiq / Javidan, Mohammad Mahdi / Chun, Seungho / Kim, Jinkoo	Experimental study on seismic retrofit of a RC frame using viscoelastic dampers	771-786
Ming, Ming / Zheng, Shansuo / Zhang, Yixin / Zheng, Yue / Yang, Song / Song, Mingchen	Experimental study on the bond-slip behavior and stress transfer mechanism between shaped steel and high-performance fiber-reinforced concrete	5013-5028
Xin, Haohui / Tarus, Iulia / Cheng, Lu / Veljković, Milan / Persem, Nicolas / Lorich, Laurent	Experiments and numerical simulation of wire and arc additive manufactured steel materials	1393-1402
Somala, Surendra Nadh / Chanda, Sarit / Karthikeyan, Karthika / Mangalathu, Sujith	Explainable Machine learning on New Zealand strong motion for PGV and PGA	4977-4985
Sun, W. / Achintha, M.	Exploitation of FRP fabric Reinforcement: Innovation beyond FRP bars	1099-1107
Van Cao, Vui	External GFRP confinement to decrease near-fault earthquake damage of reinforced concrete structures considering soil-structure interaction	2318-2339
Wang, Lei / Shi, Fen / Chen, Kai / Tang, Yi / Hao, Wei	A fabrication method of continuous aero-model for high chimney	3716-3723
Doyle, Tobias / Wheatley, Greg / Nejad, Reza Masoudi / Sina, Nima	Fatigue reliability assessment of the new design of universal upright for the JCU Formula SAE car	4113-4123
Liu, Wei / Ikago, Kohju	Feasibility study of a passive rate-independent damping device for the seismic protection of low-frequency structures	2499-2514
Vipin, K. T. / Ganesan, N. / Indira, P. V.	Ferro-geopolymer composites for roofing – A sustainable approach for infrastructures	215-223
Zakian, P. / Nadi, M. / Tohidi, M.	Finite cell method for detection of flaws in plate structures using dynamic responses	327-338
Fang, Zhiyuan / Roy, Krishanu / Chi, Yaohui / Chen, Boshan / Lim, James B. P.	Finite element analysis and proposed design rules for cold-formed stainless steel channels with web holes under end-one-flange loading	2876-2899
Calayır, Yusuf / Yetkin, Musa / Erkek, Hakan	Finite element model updating of masonry minarets by using operational modal analysis method	3501-3507
Saremi, Emad / Toopchi-Nezhad, Hamid	Finite element modeling of horizontal load-displacement hysteresis loops in unbonded elastomeric isolators	2987-2995
Khan, Mustesin Ali / Khan, Aatif Ali / Domada, Ramakanth / Usmani, Asif	Fire hazard assessment, performance evaluation, and fire resistance enhancement of bridges	4704-4714
Perera, Dilini / Poologanathan, K. / Gatheeshgar, P. / Upasiri, I. R. / Sherlock, P. / Rajanayagam, H. / Nagaratnam, B.	Fire performance of modular wall panels: Numerical analysis	1048-1067
Zhou, Xuhong / Yang, Jingjie / Liu, Jiepeng / Wang, Shang / Wang, Weiyong	Fire resistance of thin-walled steel tube confined reinforced concrete middle-length columns: Test and numerical simulation	339-355
Mousa, E. A. / El-Boghdadi, M. H. / Yossef, N. M.	Flange yield and load/deflection in plate girders with different types of end stiffeners	3915-3930
Ahmad, Adil / Singh, Yogendra	Flexural behavior of Expanded Polystyrene core Reinforced Concrete Sandwich Panels with different construction methods and end conditions	2900-2911
Meng, Xin / Gardner, Leroy	Flexural buckling of normal and high strength steel CHS columns	4364-4375
Ren, Junwei / Xu, Quanbiao / Chen, Gang / Liu, Chengbin / Gong, Shunfeng / Lu, Yong	Flexural performance of pretensioned centrifugal spun concrete piles with combined steel strands and reinforcing bars	4467-4485
Ahmed, Khondaker Sakil / Habib, Md Ahsan / Asef, Md Farhan	Flexural response of stainless steel reinforced concrete beam	589-603
Kodsy, Antony / Morcous, George	Flexural strength prediction models of non-prestressed Ultra-High Performance Concrete (UHPC) components	4532-4547
Liu, Dejun / Xia, Zhiheng / Wang, Jun / Zuo, Jianping	Flexural strengthening mechanism of concrete-filled steel tube beam by welding round steel at soffit of the beam	2243-2261
Emad, Wael / Salih, Ahmed / Kurda, Rawaz	Forecasting the mechanical properties of soilcrete using various simulation approaches	653-665
Cima, Valentina / Tomei, Valentina / Grande, Ernesto / Imbimbo, Maura	Fragility curves at regional basis for unreinforced masonry buildings prone to out-of-plane mechanisms: the case of Central Italy	4774-4787
Kwak, Songhun / Kim, Kwanghun / Yun, Jongguk / Kim, Sok / Ri, Phyongchol	Free vibration analysis of laminated closed conical, cylindrical shells and annular plates with a hole using a meshfree method	3070-3086
Li, Hao / Wei, Yang / Wang, Libin	A general model for predicting the off-axis performance of fiber reinforced composite materials	2087-2097
Islam, M. Shahidul / Shahnewaz, Md / Shahria Alam, M.	Glass fiber reinforced Polymer (GFRP) retrofitting of timber I-Joists with opening and notch	804-826
Wang, Ning / Huang, Xiaoning	Global damage model for the seismic reliability analysis of a base‐isolated structure	4892-4907
Liang, Jiaming / Li, Zhanchao / Ji, Qingfeng / Lu, Weigang / Cao, Qiulin / Ahmed, Eladly	Global sensitivity analysis of the deformation behavior of sluice chamber structure	4682-4693
Abedin, Mohammad / Mehrabi, Armin B.	Health monitoring of steel box girder bridges using non-contact sensors	4012-4024
Zhou, Qiaoling / Su, Mingzhou / Shi, Yun / Guan, Lingyu / Lian, Ming / Jiang, Lu / Yang, Yukun / Zhang, Lili	Hysteretic behavior of the hybrid coupled partially encased composite wall system	4216-4236
Chen, Lei / Shan, Wubin / Liu, Peng	Identification of concrete aggregates using K-means clustering and level set method	2069-2076
Zhao, Wuchao / Ye, Jihong	Impact force characteristic and mechanical behavior of trucks in collisions against bridge piers	1489-1506
Kaveh, A. / Rezazadeh Ardebili, Sh.	An improved plasma generation optimization algorithm for optimal design of reinforced concrete frames under time-history loading	758-770
Alehojjat, Seyed Behdad / Bahar, Omid / Yakhchalian, Masood	Improvements in the direct displacement-based design procedure for mid-rise steel MRFs equipped with viscous dampers	1636-1650
Li, Tong / Deng, Mingke / Ma, Yuren / Zhang, Yangxi	In-plane behavior of URM wall with openings strengthened with ECC subjected to cyclic load	2765-2776
Zhou, Junyong / Hu, Cuimin / Zhang, Junping / Huang, Haiyun	Incorporating the unevenness of lane truck loading into fatigue load modeling of multi-lane bridges	1746-1760
Deringöl, Ahmet Hilmi / Güneyisi, Esra Mete	Influence of nonlinear fluid viscous dampers in controlling the seismic response of the base-isolated buildings	1923-1941
Dhuria, Mohit / Grover, Neeraj / Goyal, Kavita	Influence of porosity distribution on static and buckling responses of porous functionally graded plates	1458-1474
Lam, Chi Chiu / Cai, Jingming / Gu, Jiaming / Zhang, Yufei	The influence of rounded corners on the performance of single-coped beam with slender web	4297-4307
Wei, Biao / Zhuo, Yi / Hu, Zhangliang / Li, Shanshan / He, Xuhui / Xiao, Chun	Influence of site conditions on structural vulnerability of a super high three-tower cable-stayed bridge	3882-3893
Farsi, A. / Amiri, H. R. / Dehghan Manshadi, S. H.	An innovative C-shaped yielding metallic dampers for steel structures	4254-4268
Chakraborty, Sumeet / Dey, Tanish / Kumar, Rajesh	Instability characteristics of damped CNT reinforced laminated shell panels subjected to in-plane excitations and thermal loading	2936-2949
Laccone, Francesco / Malomo, Luigi / Pietroni, Nico / Cignoni, Paolo / Schork, Tim	Integrated computational framework for the design and fabrication of bending-active structures made from flat sheet material	979-994
Bechert, Simon / Sonntag, Daniel / Aldinger, Lotte / Knippers, Jan	Integrative structural design and engineering methods for segmented timber shells - BUGA Wood Pavilion	4814-4833
Al Shboul, Khalid W. / Rasheed, Hayder A. / Alshareef, Husam A.	Intelligent approach for accurately predicting fatigue damage in overhead highway sign structures	3453-3463
Li, Ke / Zhao, Dapeng / Wang, Xinling / Feng, Hu / Zou, Xuyan	Investigation of crack growth in CFRP-concrete interface under fatigue loading	356-367
Jain, Saumitra / Pujari, Sumiran / Laskar, Arghadeep	Investigation of one dimensional multi-layer periodic unit cell for structural base isolation	2151-2163
Mashhadiali, Niloufar / Molaei, Fatemeh / Siavoshi, Hossein	Investigation of shear lag effect in tall tube-type buildings	4204-4215
Bai, Qiangqiang / Chen, Jian	An iterative FEM approach for tunnel shape optimization based on the concept of rational arch axis	4634-4651
Burton, C. / Visintin, P. / Griffith, M. / Vaculik, J.	Laboratory investigation of pull-out capacity of chemical anchors in individual new and vintage masonry units under quasi-static, cyclic and impact load	901-930
Babaei, Hadi	Large deflection analysis of FG-CNT reinforced composite pipes under thermal-mechanical coupling loading	886-900
Hassanli, Reza / Vincent, Thomas / Manalo, Allan / Smith, Scott T. / Gholampour, Aliakbar / Gravina, Rebecca	Large-scale experimental study on pocket connections in GFRP-reinforced precast concrete frames	523-541
Rostami, Afshin / Poursha, Mehdi	A lateral load distribution for the static analysis of base-isolated building frames under the effect of far-fault and near-fault ground motions	2384-2405
Ling, Zhibin / Rong, Xiuqiang / Xiang, Zhe	Laterally loaded performance of single dowel-type fastener used for steel plate-to-timber connections	1985-1997
Khansefid, A.	Lifetime risk-based seismic performance assessment of buildings equipped with supplemental damping and base isolation systems under probable mainshock-aftershock scenarios	3647-3666
Molkens, Tom / Rossi, Barbara	Linear elastic mode-based reliability approach for single-bay portal frames	2205-2217
Xu, Zhaoyu / Tong, Genshu / Zhang, Lei / Guo, Yong	Local and distortional buckling of extruded aluminium alloy lipped angle columns	3894-3905
Deepak, M. S. / Ananthi, G. Beulah Gnana	Local buckling behaviour and capacities of Cold-Formed Steel Double-I-Box stub and short column sections	1761-1784
Radwan, M. / Kövesdi, B.	Local plate buckling type imperfections for NSS and HSS welded box-section columns	2628-2643
Zhang, Ai-Lin / Qiu, Ping / Jiang, Zi-qin / Li, Ran / Zhang, Xue-Feng	Low-cycle reciprocating loading test of Earthquake-resilient prefabricated steel frame with double FCPs	3982-3995
Xu, Yan / Zhang, Mingyu / Yang, Sen / Zheng, Baofeng	Measurement and qualification of welded I-column failure mode using laser scanning technique	2694-2707
Cao, Jixing / Xiong, Haibei / Chen, Jiawei	Mechanical performance of timber-concrete bolted connections under cyclic loading	3464-3477
Ran, Jinlin / Li, Tingchun / Chen, Dianhao / Shang, Liming / Li, Weiteng / Zhu, Qingwen	Mechanical properties of concrete reinforced with corrugated steel fiber under uniaxial compression and tension	1890-1902
Wang, Xinyu / Zhou, Ting / Chen, Zhihua / Zhou, Xiaohui / Zhang, Pengfei / Zhang, Xiangyong	Mechanical properties of L-shaped column frame combined with shear wall	4920-4935
Feng, Lifei / Sun, Tianshu / Ou, Jinping	Method of determining the minimum number of stiffeners for stiffened corrugated steel walls	3487-3500
Almutairi, Mohammad / Nikitas, Nikolaos / Abdeljaber, Osama / Avci, Onur / Bocian, Mateusz	A methodological approach towards evaluating structural damage severity using 1D CNNs	4435-4446
Zhai, Yu-Jia / Ma, Zhi-Sai / Chang, Hong-Zhen / Ding, Qian	Model order reduction and dynamic characteristic analysis of the bolted flange structure with free-free boundaries	149-157
Kisi, Ozgur / Mansouri, Iman / Awoyera, Paul O. / Lee, Chang-Hwan	Modeling flexural overstrength factor for steel beams using heuristic soft-computing methods	3238-3246
Nastri, Elide / Rescigno, Francesco / Montuori, Rosario / Piluso, Vincenzo	Modelling non-linear behaviur of aluminium alloy gusset joints for single layer lattices domes	4511-4523
Abu-Salma, Deema / Vollum, Robert L. / Macorini, Lorenzo	Modelling punching shear failure at edge slab-column connections by means of nonlinear joint elements	630-652
Chen, Ju / Zhang, Haipeng / Yu, Qian-Qian	Monotonic and fatigue behavior of steel-concrete composite beams subjected to corrosion	1973-1984
Wenwen, Chen / Jihong, Ye	The most adverse fire scenario research of steel frame structure fire-resistant design based on structural vulnerability analysis	2861-2875
Yoshitake, Isamu / Hasegawa, Hiroaki	Moving-wheel fatigue durability of cantilever bridge deck slab strengthened with high-modulus CFRP rods	2406-2414
Ghasemof, Ali / Mirtaheri, Masoud / Mohammadi, Reza Karami / Mashayekhi, Mohammad Reza	Multi-objective optimal design of steel MRF buildings based on life-cycle cost using a swift algorithm	4041-4059
Ahadzadeh Kolour, Narges / Basim, Mohammad Charkhtab / Chenaghlou, Mohammadreza	Multi-objective optimum design of nonlinear viscous dampers in steel structures based on life cycle cost	3776-3788
Azad, Saeid Kazemzadeh / Aminbakhsh, Saman / Shaban, Samer S. S.	Multi-stage guided stochastic search for optimization and standardization of free-form steel double-layer grids	678-699
Kahya, Volkan / Okur, Fatih Yesevi / Karaca, Sebahat / Altunişik, Ahmet Can / Aslan, Mustafa	Multiple damage detection in laminated composite beams using automated model update	1665-1683
Helaili, Sofiene / Chafra, Moez / Chevalier, Yvon	Natural fiber alfa/epoxy randomly reinforced composite mechanical properties identification	542-549
Abdelaleem, Tarek / Diab, Hesham M. / Rashwan, Mohamed M. M.	New aspects about the effect of critical regions reinforcement on the strength and moment redistribution of RC continuous T-beams (Experimental and numerical study)	4834-4850
Solhmirzaei, Arash / Tahamouli Roudsari, Mehrzad / Hosseini Hashemi, Behrokh	A new detail for the panel zone of beam-to-wide flange column connections with endplate	1108-1123
Lu, Zhao-Hui / Zhou, Qi-Hao / Li, Hai / Zhao, Yan-Gang	A new empirical model for residual flexural capacity of corroded post-tensioned prestressed concrete beams	4308-4321
He, Zhongying / Yang, Heng / Zhu, Jinyong / Pang, Yutao	A new energy balance-based method for evaluating seismic performance of isolated bridges under near-fault ground motions	3724-3737
Li, Benben / Zhan, Yang	A new joint-slippage model for galvanized steel bolted joints with slippage	1034-1047
Pallares-Muñoz, Myriam R. / Payá-Zaforteza, Ignacio / Hospitaler-Pérez, Antonio	New modeling strategies for analyzing lateral-torsional buckling in class-4 steel structural members at elevated temperatures using beam-type elements	3508-3532
Kheirollahi, Mohammad / Abedi, Karim / Reza Chenaghlou, Mohammad	A new pushover procedure for estimating seismic demand of double-layer barrel vault roof with vertical double-layer walls	1507-1524
Tung, Pham Thanh / Van Long, Nguyen / Tu, Tran Minh / Phuong, Nguyen Thi Bich / Hai, Le Thanh / Long, Tran Ngoc	Nonlinear bending analysis of fgp plates under various boundary conditions using an analytical approach	4803-4813
Zakir, Mohammad / Sofi, Fayaz A. / Behera, Siddharth	Nonlinear finite element analysis of circular stiffened FRP-concrete-steel double-skin tubular columns (DSTCs) and experimental compressive behavior of multiple DSTC shapes	3283-3299
Zampieri, Paolo / Tetougueni, Cyrille Denis / Pellegrino, Carlo	Nonlinear seismic analysis of masonry bridges under multiple geometric and material considerations: Application to an existing seven-span arch bridge	78-94
Murad, Yasmin / Abu-AlHaj, Tareq	Novel 3D printed bars for retrofitting heat damaged RC beams	3427-3435
Zhou, Yiyi / Gao, Yuan / Wang, Chun-Lin / Chen, Lian-Meng	A novel brace with partial buckling restraint: Parametric studies and design method	1734-1745
Liu, Wei / Guo, Wenhua	A novel predictor–corrector explicit integration scheme for structural dynamics	2735-2745
Cui, Ming-Zhu / Ren, Wei-Xin / Yin, Yong-Gao	Numerical analysis and field load testing of a suspension bridge with a root pile anchorage	1373-1382
Zhang, Lei / Yang, Shuang-Long / Tong, Gen-shu / Tong, Jing-Zhong	Numerical analysis on concrete-filled wide rectangular steel tubular (CFWRST) stub columns under axial compression	4715-4730
Yaman, Mustafa / Şansveren, Mehmet Fatih	Numerical and experimental vibration analysis of different types of adhesively bonded joints	368-380
Ma, Zhu / Shi, Chang-Zheng / Wu, He-Gao	Numerical cracking analysis of steel-lined reinforced concrete penstock based on cohesive crack model	4694-4703
Feng, Jian / Ren, Shuxuan / Zhang, Qian / Xu, Yixiang / Li, Jianyu / Cai, Jianguo	Numerical investigation on the buckling behavior of damaged steel members constrained by outer tubes	1068-1079
Liu, Hai-Xin / Fang, Han / Zhu, Jiong-Yi / Chan, Tak-Ming	Numerical investigation on the structural performance of octagonal hollow section columns	3257-3267
Andrade, Pedro / Santos, José / Maia, Lino	Numerical methods to predict human induced vibrations on low frequency stairs. Part 1: Literature review, modelling	575-588
Andrade, Pedro / Santos, José / Escórcio, Patrícia	Numerical methods to predict human induced vibrations on low frequency stairs. Part 2: Evaluation by comparing with experimental data	1008-1020
Naserpour, Afshin / Fathi, Mojtaba	Numerical study of demountable shear wall system for multistory precast concrete buildings	700-715
Luo, Qirui / Wang, Wei / Wang, Bingjie / Xu, Shanwen / Sun, Zhuangzhuang	Numerical study on interface optimization of new-to-old concrete with the slant grooves	381-399
Kazemi, Mostafa / Madandoust, Rahmat / Chastre, Carlos / Esfahani, Mohammad Reza / Courard, Luc	Numerical study on the flexural behaviour of normal- and high-strength concrete beams reinforced with GFRP bar, using different amounts of transverse reinforcement	3113-3124
Galano, Simone / Calabrese, Andrea / Losanno, Daniele	On the response of fiber reinforced elastomeric isolators (FREIs) under bidirectional shear loads	2340-2354
Galeotti, Claudio / Gusella, Federico / Orlando, Maurizio / Spinelli, Paolo	On the seismic response of steel storage pallet racks with selective addition of bolted joints	3806-3817
Sakai, Yusuke / Ohsaki, Makoto	Optimization method for shape design of Auxetic Bending-Active Gridshells using discrete differential geometry	1589-1602
Brambila de Salles, Humberto / Miguel, Leandro Fleck Fadel / Lenzi, Marcos Souza / Lopez, Rafael Holdorf	A Padé-based fast frequency sweep approach for irregular large-scale building models subjected to seismic excitation	4376-4388
Wu, Tao / Sun, Ying / Cao, Zhenggang	Parameter determination of constitutive relationship of 3004H24 aluminum alloy based on ductile damage model	4447-4456
Sistla, Saiteja / Mohan, S. C.	Parametric studies and application of fibre reinforced elastomeric isolators to low-rise buildings	2679-2693
Becerra, Humberto C. / Silva, Amilton R.	Parametric study using a curved shell finite element to dynamic analysis of footbridge under rhythmic loading	135-148
Marinho, Anderson Patrick Machado / Krahl, Pablo Augusto / Almeida, Saulo José de Castro / Pereira, Margot Fabiana / Siqueira, Gustavo Henrique	Parametrical analysis of partially encased composite columns with fiber reinforced concrete subjected to uniaxial and biaxial non-constant bending moments	1872-1889
Song, Ge / Yang, T. Y. / Zhou, Ying	Performance evaluation of self-centering rocking shear walls: Part 1 — Quantification of structural damages	2515-2529
Song, Ge / Yang, T. Y. / Zhou, Ying	Performance evaluation of self-centering rocking shear walls: Part 2 — Determination of performance objectives	3404-3413
Li, Wei / Li, Wei-Jie / Xu, Li-Feng / Wang, Fa-Cheng	Performance of CFDST beams using high-strength steel under bending	2644-2655
Xu, Qizhi / Lu, Kaiwei / Wang, Jingquan / Yao, Yiming	Performance of large-diameter studs in thin ultra-high performance concrete slab	4936-4951
Hejazi, Mehrdad / Baranizadeh, Saeid / Daei, Maryam	Performance of Persian brick masonry single-shell domes subjected to uniform pressure and concentrated load	1710-1719
Hasanzadeh, Mohsen / Rezaifar, Omid / Gholhaki, Majid / Sharbatdar, Mohammad Kazem	Performance optimization of ground rubberized green concrete with metakaolin	433-448
Amoussou, Cossi Prosper Dagbo / Lei, Honggang / Halabi, Yahia / Alhaddad, Wael	Performance-based seismic design methodology for tall buildings with outrigger and ladder systems	2288-2307
Cacho-Pérez, M. / Gómez-Carretero, J.	Plastic calculation of slender beam frames systematic method based on mechanism theory	2840-2847
Lou, H. P. / Ye, J. / Jin, F. L. / Gao, B. Q. / Wan, Y. Y. / Quan, G.	A practical shear wall layout optimization framework for the design of high-rise buildings	3172-3195
Sun, WeiWei / Feng, Jun / Mao, Fengtao	Pressure distribution of central cone silos during filling and discharge: Multi-scale experimental study	42-50
Sangaki, Amir Hossein / Rofooei, Fayaz R. / Vafai, Hassan	Probabilistic integrated framework and models compatible with the reliability methods for seismic resilience assessment of structures	4086-4099
Dang, Hung V. / Trestian, Ramona / Bui-Tien, Thanh / Nguyen, Huan X.	Probabilistic method for time-varying reliability analysis of structure via variational bayesian neural network	3703-3715
Chen, Liang / Sun, Tianyue / Hu, Ke / Zhong, Jian	Probabilistic seismic assessment of a new elastoplastic column-deck joint on the prefabricated frame-bridge	3099-3112
Malekizadeh, Mohammad / Fanaie, Nader / Pirasteh, Ali Akbar	Probabilistic seismic assessment of steel gabled frames with web-tapered members under near-fault ground motions along strike-normal and strike-parallel components	4142-4157
Zhao, Chunfeng / Yu, Na / Peng, Tao	Probabilistic seismic fragility assessment of isolated nuclear power plant structure using IDA and MSA methods	1300-1311
Moslemi, Abdollah / Navayi neya, Bahram / Davoodi, Mohammad-Reza / Dehestani, Mehdi	Proposing and finite element analysis of a new composite profiled sheet deck – Applying PU and PVC and stability considerations	3040-3054
Hasanzadeh, Rana / Ahmadi, Jamal / Eghbali, Mahdi / Samadian, Delbaz / Salmanmohajer, Hamidreza	Reduction of seismic resiliency of RC structures caused by chloride corrosion for typical school buildings located in hot climates	4060-4076
Tsarpalis, P. / Vayas, I. / Thanopoulos, P. / Vamvatsikos, D.	Rehabilitation of reinforced concrete building using the fuseis beam-link system	3300-3314
Moghtadernejad, Nima / Jamshidi, Morteza / Maheri, Mahmoud R. / Keong, Choong Kok	Repair of post-heated short rectangular reinforced concrete columns with FRP jackets	4269-4283
Zhang, Wen-Ming / Qian, Kai-rui / Ge, Yao-Jun	Research on flutter-mode transition of a triple-tower suspension bridge based on structural nonlinearity	787-803
Gang, WANG / Caiqi, Zhao	Research on the M-θ model considering the effect of axial force and bolt clearance of flower-gusset composite joints	2164-2173
Xu, Jun / Zhang, Zhile / Wu, Taotao	Residual fatigue lives assessment of riveted lap joints based on a crack growth model	1383-1392
Meskenas, A. / Ramanauskas, R. / Sokolov, A. / Bacinskas, D. / Kaklauskas, G.	Residual stress – strain relations inversely derived from experimental moment – curvature response of RC beams with fibres compared to the recommendations of design codes	3363-3375
Kashani, Mohammad Mehdi / Saiidi, Saiid / Eberhard, Marc O.	Resilience-Based Design for Next-Generation Bridge Design and construction	4466
Barkhordari, Mohammad Sadegh / Tehranizadeh, Mohsen	Response estimation of reinforced concrete shear walls using artificial neural network and simulated annealing algorithm	1155-1168
Murad, Yasmin Zuhair / Alseid, Bara' Hani	Retrofitting interior RC beam-to-column joints subjected to quasi-static loading using NSM CFRP ropes	4158-4168
Chen, Zhao	A review of current research progress on tensile behavior of expansion anchors in concrete	2276-2287
Xiao, Manyu / Mukherjee, Sougata / Raghavan, Balaji / Dutta, Subhrajit / Breitkopf, Piotr / Zhang, Weihong	Revisiting p-refinement in structural topology optimization	3640-3646
Das, Sourav / Chakraborty, Arunasis	Robust design of MR elastomer for optimal isolation against non-stationary ground motion	4999-5012
Wang, Hongxin / Chen, Zhonggao / Wen, Guilin / Ji, Guohua / Xie, Yi Min	A robust node-shifting method for shape optimization of irregular gridshell structures	666-677
Kita, Alban / Lupattelli, Arianna / Venanzi, Ilaria / Salciarini, Diana / Ubertini, Filippo	The role of seismic hazard modeling on the simplified structural assessment of an existing concrete gravity dam	4560-4573
Yang, Lianping / Wang, Meng / Wei, Shen / Yu, Shaole	Rotating performance of Temcor joints for aluminum single-layer reticulated shells	1346-1363
Ruiz-García, Jorge / Olvera, Roberto N. / Frías, Ariel D.	Seismic assessment of school buildings with short captive RC columns under subduction seismic sequences	2432-2444
Du, Yansheng / Zhang, Yutong / Chen, Zhihua / Dong, Shaohua / Deng, Xiao-Fang / Qian, Kai	Seismic behavior of CFRP confined rectangular CFST columns using high-strength materials: Numerical analysis and restoring force model	4237-4253
Dong, Hongying / Qin, Jia / Chen, Zheng / Cao, Wanlin / Tang, Yunpeng	Seismic behavior of full-scale square high-strength RACFST columns	2600-2616
Zhang, Jianwei / Liu, Yujun / Chen, Zeqiao / Cai, Ruxing / Li, Xiangyu	Seismic behavior of high-strength concrete-filled square steel tube columns reinforced with ultrahigh-strength reinforcing bars	3125-3140
Rong, Xian / Zhang, Xiaowei / Zhang, Jianxin	Seismic behavior of innovation steel-embedded precast concrete beam-to-column joints	4952-4964
Dong, Hongying / Liang, Xu / Cao, Wanlin / Guo, Huazhen / Yin, Fei	Seismic behavior of large-size encased cross-section steel-reinforced high-strength concrete circular columns	1169-1184
Yin, Fei / Wang, Ru-wei / Cao, Wan-lin / Qiao, Qi-Yun / Ye, Tao-ping / Ren, Lele	Seismic behavior of light weight CFST frame-fabricated single row reinforced shear wall structures	4486-4499
Cong, Shuping / Zhang, Zheng / Zheng, Qi / Xu, Zhifeng	Seismic behavior of reinforced concrete frame staircase with separated slab stairs	4284-4296
Salameh, Molham / Shayanfar, Mohsenali / Barkhordari, Mohammad Ali	Seismic displacements and behaviour factors assessment of an innovative steel and concrete hybrid coupled shear wall system	20-41
Zhang, Chao / Lu, Jianbin / Wang, Piguang / Lai, Zhichao / Jia, Hongyu / Wu, Chengwang	Seismic fragility analysis of sea-crossing continuous rigid frame bridges based on fuzzy failure	120-134
Wang, J. H. / Sun, Y. P. / Takeuchi, T.	Seismic fragility and post-earthquake reparability of circular reinforced concrete bridge columns with low-bond high-strength reinforcements	840-855
Yildizlar, Baris	Seismic performance analysis and rehabilitation applications for a historical masonry building through field works and experimental investigations	1811-1833
Kenan, Hamit / Azeloglu, C. Oktay	Seismic performance analysis of tower crane mast types with different bracing configurations	286-302
Mohammadi, Majid / Mirzaei, Moein / Pashaie, Mohammad Reza	Seismic performance and fragility analysis of infilled steel frame structures using a new multi-strut model	1403-1415
Aggarwal, Yati / Saha, Sandip Kumar	Seismic performance assessment of reinforced concrete hilly buildings with open story	224-238
Zhao, Jianchen / Qiu, Hongxing / Sun, Jian / Jiang, Hongbo	Seismic performance evaluation of different strategies for retrofitting RC frame buildings	2355-2366
Chaudhari, Vasudeo / Somala, Surendra Nadh	Seismic performance of offshore wind turbine in the vicinity of seamount subduction zone	423-432
Chen, Haibin / Wu, Liwei / Jiang, HU / Liu, Yan	Seismic performance of prefabricated middle frame composed of special-shaped columns with built-in lattice concrete-filled circular steel pipes	1443-1457
Imran, Iswandi / Siringoringo, Dionysius M. / Michael, James	Seismic performance of reinforced concrete buildings with double concave friction pendulum base isolation system: case study of design by Indonesian code	462-478
Zhu, Lihua / Ning, Qiujun / Zhao, Cheng / Ji, Cuiru / Pan, Xinbo / Han, Wei	Seismic performance of self-centering circular concrete-filled steel tubular column to steel beam connection with web friction device	1843-1857
Ren, Xin / Qiang, Zhang / Dazhu, Hu / Dengshan, Bi	Seismic performance study on critically damaged masonry piers retrofitted using shear-compressive metal dampers	3906-3914
Cayci, Bayram Tanik / Akpinar, Mustafa	Seismic pounding effects on typical building structures considering soil-structure interaction	1858-1871
Shafei, Erfan / Tariverdilo, Saeed	Seismic pullout behavior of cast-in-place anchor bolts embedded in plain concrete: Damage plasticity based analysis	479-486
Qian, Huiya / Guo, Junchao / Yang, Xiuming / Lin, Feng	Seismic rehabilitation of gravity load-designed interior RC beam-column joints using ECC-infilled steel cylinder shell	1212-1228
Elias, Said / Rupakhety, Rajesh / De Domenico, Dario / Ólafsson, Símon	Seismic response control of bridges with nonlinear tuned vibration absorbers	262-274
Wang, Xinyu / Xie, Linlin / Zeng, Demin / Yang, Cantian / Liu, Qianmin	Seismic retrofitting of reinforced concrete frame-shear wall buildings using seismic isolation for resilient performance	4745-4757
Bothara, Jitendra / Desai, Rajendra / Ingham, Jason / Dizhur, Dmytro	Seismic simulation tools and methods appropriate for developing countries	314-326
Mansour, Ayman Mohammad / Kassem, Moustafa Moufid / Nazri, Fadzli Mohamed	Seismic vulnerability assessment of elevated water tanks with variable staging pattern incorporating the fluid-structure interaction	61-77
Ahmadi, Ehsan / Kashani, Mohammad M.	Seismic vulnerability assessment of precast post-tensioned segmental bridge piers subject to far-fault ground motions	2566-2579
Dong, Hongying / Qin, Jia / Cao, Wanlin / Yang, Lin / Yin, Fei / Wang, Ruwei	Shaking table tests on concrete-filled steel tubular-framed building assembled with microcrystalline foam boards	2098-2114
Tran, Cao Thanh Ngoc / Nguyen, Xuan Huy / Le, Anh Tuan / Nguyen, Huy Cuong / Le, Dang Dung	Shear tests of GFRP-reinforced concrete beams strengthened in shear by textile reinforced concrete	4339-4349
Saoula, Abdelkader / Selim, Mahmoud M. / Meftah, Sid Ahmed / Benyamina, Abdelrahmane Bekaddour / Tounsi, Abdelouahed	Simplified analytical method for lateral torsional buckling assessment of RHS beams with web openings	2848-2860
Liu, Shan-wei / Zhang, Qian-qing / Cui, Chun-yu / Feng, Ruo-feng / Cui, Wei	A simplified approach for the response of pile groups composed of dissimilar piles	4548-4559
Rossi, P. P.	Simplified evaluation of the N-M-V ultimate domain of R.C. rectangular members with shear reinforcement	4758-4773
Xu, Wenliu / Wang, Licheng	Simplified model for static stress analysis of straight eccentric lug subjected to cosine distribution pressure	2077-2086
Bui, Linh Van Hong / Jongvivatsakul, Pitcha / Limpaninlachat, Pornpen / Stitmannaithum, Boonchai / Nguyen, Thanh-Truong / Nguyen, Trong-Phuoc	Simulation of shear behavior of corroded reinforced concrete beams flexurally repaired with steel fiber-reinforced concrete	1545-1559
Liu, Wei / Li, Yuchun	Stability analysis for parametric resonances of frame structures using dynamic axis-force transfer coefficient	3611-3621
Mubarack, C. K. Ali / Upadhyay, Akhil	Stability of continuous welded rail on steel bridge subjected to thermal loading	4524-4531
Hasan, Mohammad Jobaer / Ashraf, Mahmud / Al-deen, Safat / Shill, Sukanta Kumer / Uy, Brian	Stainless steel top-seat angle beam-to-column connection: Full-scale test and analytical modelling	4322-4338
Huang, Yang / Chen, Shiming / Gu, Ping	Static and fatigue behavior of shear stud connection embedded in UHPC	2777-2788
Zhou, Hongyuan / Zhou, Houzhan / Wang, Xiaojuan / Cao, Wanlin / Song, Tianyi / Qiao, Qiyun	Static size effect of recycled coarse aggregate concrete: Experimental study, meso-scale simulation, and theoretical analysis	2996-3012
Wang, Xiuling / Fan, Feifei / Lai, Jinxing / Xie, Yongli	Steel fiber reinforced concrete: A review of its material properties and usage in tunnel lining	1080-1098
Hajimirsadeghi, Mohammad Reza / Fanaie, Nader	Steel plate shear walls with large disconnected lengths of web plate to vertical boundary element	4596-4615
Karimizadeh, Hamid / Arabzadeh, Abolfazl	A STM-based analytical model for predicting load capacity of deep RC beams with openings	1185-1200
Halicka, Anna / Ślósarz, Szymon	Strengthening of timber beams with pretensioned CFRP strips	2912-2921
Wang, Jinxiao / Cheng, Bin / Yan, Xingfei / Zhang, Kailong / Zhou, Zhenxing	Structural analysis and optimization of an advanced all-GFRP highway bridge	3155-3171
Karpov, V. V. / Semenov, A. A.	Structural anisotropy method for shells with orthogonal stiffeners	3206-3221
Chandrathilaka, E. R. K. / Kristombu Baduge, Shanaka / Mendis, Priyan / Thilakarathna, P. S. M.	Structural applications of synthetic fibre reinforced cementitious composites: A review on material properties, fire behaviour, durability and structural performance	550-574
Apandi, Nazirah / Ma, Chau-Khun / Awang, Abdullah Zawawi / Omar, Wahid	Structural behaviour of pre-damaged RC columns immediate repaired employing pre-tensioned steel straps	964-978
Ge, Xinguang / Li, Chuangdi / Azim, Iftikhar / Gong, Jinghai / Li, Yuxiang	Structural dynamic responses of linear structures subjected to Kanai-Tajimi excitation	3958-3967
Chen, Chun-Chung / Siao, Sheng-Yuan / Jiang, Chi-Rung / Lee, Bo-Han / Yeh, Fang-Yao	Structural effects of unequal leg lengths in lattice steel towers with the D-type bracing system	2801-2817
Archana, A. R. / Abdul Akbar, M.	Structural irregularity quantification in buildings using vital signs	2592-2599
Wu, Yangwei / Du, Xinxi / Yuan, Huanxin	Structural performance of cold-formed steel box girders with C-section flanges and sinusoidal corrugated webs	4851-4866
Zhang, Bingjie / Wang, Yuzhuo / Li, Guoqiang / Qu, Shuang / Fu, Chuanguo / Xu, Tiangui	Structural performance of steel reinforced concrete T-shaped columns exposure to high temperature	716-728
Takagi, Jiro / Ohsaki, Makoto / Cao, Yongsheng	Structural properties of superior design solutions of steel buildings associated with BRBs	3851-3865
El–sayed, H. M. / Zohny, H. N. / Riad, H. S. / Fayed, M. N.	Structural response of monoblock railway concrete sleepers and fastening systems subject to coupling vertical and lateral loads: A numerical study	995-1007
He, Zhen-jun / Chen, Ying / Ma, Yan-ni / Zhang, Xiao-jie / Jin, Ying-xi / Song, Jia	The study on bond-slip constitutive model of steel-fiber high-strength recycled concrete	2134-2150
Xu, Ping / Xiao, Xianliang / Yao, Shuguang / Kong, Lingxiang	Study on effect of offset defect on mechanical property of honeycomb structures	275-285
Wang, Jiachang / Shu, Ganping / Xu, Xiu / Dong, Shutong / Zheng, Baofeng	Study on mechanical properties of high strength sorbite stainless steel S600E under monotonic and cyclic loadings	2665-2678
Xu, Zhen-Hua / Bai, Guo-liang / Zhao, Jin-Quan / Liu, Biao	Study on seismic performance of SRC leaning beam-column exterior joints in the main workshop of CAP1400 nuclear power plant	2721-2734
Zhou, Xiwu / Zhou, Ming / Luo, Dongmei / Wu, Benying / Liu, Lingfei	Study on the nonlinear response and shear behavior of RC columns under lateral impact	3834-3850
Wang, Qinhua / Liu, Feihong / Yu, Ying	Study on wind-induced response of a large-span roof by using finite particle method	3567-3582
Jia, Bin / Zhang, Chuntao / Lian, Jie / Huang, Hui / Liu, Xiang	Tensile behavior of FRP bar butt joints built with new FRP sleeves	1124-1134
Fan, Xiongtao / Zhao, Zhongwei / Xu, Hao / Liu, Haiqing / Zhang, Ni / Wu, Xiufeng	The tensioning process of ellipsoidal suspen-dome structures with considering the friction of cable-strut joints	3757-3775
Lin, Quan / Xue, Xiaolei / Guo, Zhan / Zhao, Yang / Chen, Yu	Test on shear behavior of less-tightened high-strength bolted connections	3622-3639
Anbarasu, M. / Pandey, Anjali Kumari Pravin Kumar / Patton, M. Longshithung / Carvalho, Hermes	Testing and modelling of hot-rolled steel castellated hollow tubular beams	4025-4040
Somala, Surendra Nadh / Karthikeyan, Karthika / Mangalathu, Sujith	Time period estimation of masonry infilled RC frames using machine learning techniques	1560-1566
Wang, Siqi / Zhang, Liye / Su, Han / Du, Jinsheng	Time-dependent robustness-based condition assessment of RC bridges subjected to corrosion	4500-4510
Zhang, Chunwei / Abedini, Masoud	Time-history blast response and failure mechanism of RC columns using Lagrangian formulation	3087-3098
Meng, Debiao / Lv, Zhiyuan / Yang, Shiyuan / Wang, Hongtao / Xie, Tianwen / Wang, Zihao	A time-varying mechanical structure reliability analysis method based on performance degradation	3247-3256
Jia, Zhi-Lu / Shi, Yan-Li / Xian, Wei / Wang, Wen-Da	Torsional behaviour of concrete-filled circular steel tubular members under coupled compression and torsion	931-946
Fotopoulou, Stavroula D. / Pitilakis, Kyriazis D.	Towards the vulnerability assessment of low-code RC frame buildings at precarious slopes subjected to rainfall induced landslide hazard	239-261
Cheng, Hu / Wang, Dong-Sheng / Li, Hong-Nan / Yan, Xin-Chi / Yu, She	Transfer time of the MDP and its effect on the time-dependent lateral deformation capacity of coastal bridge piers	3196-3205
Liu, Pengfei / Chen, Jianyun / Fan, Shuli / Xu, Qiang	Uncertainty quantification of the effect of concrete heterogeneity on nonlinear seismic response of gravity dams including record-to-record variability	1785-1797
Lv, Qingfang / Lu, Yujie / Liu, Ye	Vibration serviceability of suspended floor: Full-scale experimental study and assessment	1651-1664
Li, Si-qi / Liu, Hong-Bo / Chen, Yong-Sheng	Vulnerability models of brick and wood structures considering empirical seismic damage observations	2544-2565
Jahangir, Hashem / Hasani, Hamed / Esfahani, Mohammad Reza	Wavelet-based damage localization and severity estimation of experimental RC beams subjected to gradual static bending tests	3055-3069
Sun, Yun / Liu, Yuqing / Wang, Congzhe / Zuo, Yize / Xin, Haohui	Web buckling mechanism of pultruded GFRP bridge deck profiles subjected to concentrated load	3789-3805
Jia, Junbo	Wind induced dynamic response and fatigue assessment – Nonlinear time domain versus linear stochastic analysis	4406-4422

About this
data sheet
IssueID
59373
Published on:
26/08/2021
Last updated on:
09/05/2022

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Structures - December 2021

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Structures - December 2021

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.