Structures - Dezember 2021

Erschienen:	Dezember 2021

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Rajanayagam, Heshachanaa / Poologanathan, Keerthan / Gatheeshgar, Perampalam / Varelis, George E. / Sherlock, Paul / Nagaratnam, Brabha / Hackney, Phil	A-State-Of-The-Art review on modular building connections	1903-1922
Dey, Abhijeet / Sil, Arjun	Advanced corrosion-rate model for comprehensive seismic fragility assessment of chloride affected RC bridges located in the coastal region of india	947-963
Aguib, S. / Chikh, N. / Kobzili, L. / Djedid, T. / Nour, A. / Meloussi, M.	Analysis of buckling stability behavior of hybrid plate using Ritz approach and numerical simulation	3222-3237
Mijušković, Olga / Žugić, Ljiljana / šćepanović, Biljana / Ćorić, Branislav	Analysis of the impact of shear stress at the flange-web junction on the web behavior under concentrated and patch load	3931-3944
Ali, Shehroze / Ahmad, Junaid / Sheikh, M. Neaz / Yu, Tao / Hadi, Muhammad N. S.	Analytical load-moment (P-M) interaction diagrams of GFRP bar reinforced circular geopolymer concrete columns	2445-2454
Zahra, Tatheer / Thamboo, Julian / Asad, Mohammad / Song, Mengli	Analytical stress–strain model of reinforced concrete masonry wallettes under axial compression	2922-2935
Lu, Kaiwei / Xu, Qizhi / Wang, Mingdong / Yao, Yiming / Wang, Jingquan	Anchorage performance of bolt connection embedded in thin UHPC members	1253-1260
Hadzima-Nyarko, Marijana / Ademović, Naida / Krajnović, Marija	Architectural characteristics and determination of load-bearing capacity as a key indicator for a strengthening of the primary school buildings: Case study Osijek	3996-4011
Sahadan, Siti Norbaya / Abdullah, Shahrum / Arifin, Azli / Karam Singh, Salvinder Singh	Assessing the magnetic flux leakage contraction parameters for the fatigue life prediction of SAE1045 steel specimens	4077-4085
Alabi-Bello, M. A. / Wang, Y. C. / Su, M.	An assessment of different direct strength methods for cold-formed thin-walled steel beam-columns under compression and major axis bending	4788-4802
Guo, Qi / Sun, Yanbo / Mi, Tao	Assessment on long-term deflection of concrete beam bridges based on uncertainty quantification method	3013-3027
Basaglia, A. / Cianchino, G. / Cocco, G. / Rapone, D. / Terrenzi, M. / Spacone, E. / Brando, G.	An automatic procedure for deriving building portfolios using the Italian "CARTIS" online database	2974-2986
Su, Rong / Li, Xian / Zhong, Tao / Zhou, Tao	Axial behavior of novel CFDST columns with outer welded corrugated steel tubes	2708-2720
Chen, Zhihua / Zi, Zhenyu / Zhou, Ting / Wu, Yapeng	Axial compression stability of thin double-steel-plate and concrete composite shear wall	3866-3881
Memarzadeh, Armin / Nematzadeh, Mahdi	Axial compressive performance of steel reinforced fibrous concrete composite stub columns: Experimental and theoretical study	2455-2475
Zhang, Zhuangnan / Wang, Chungang / Cheng, Daye / Hao, Guanwang / Yu, Lan	Behavior and design of axially loaded web-stiffened stud walls	401-412
Wang, Huailiang / Wu, Yuhui / Qin, Xiaoliang / Li, Lei / Chen, Huihua / Cheng, Baoquan	Behavior of cement concrete confined by fabric-reinforced geopolymer mortar under monotonic and cyclic compression	4731-4744
Pan, Jianrong / Huang, Ruike / Xu, Jing / Wang, Peng / Wang, Zhan / Chen, Jin	Behavior of exposed column-base connections with four internal anchor bolts under seismic loading	105-119
Batran, Tayseer Z. / Ismail, Mohamed K. / Hassan, Assem A. A.	Behavior of novel hybrid lightweight concrete composites under drop-weight impact loading	2789-2800
Jia, Lianguang / Li, Qiurong / Bi, Ran / Dong, Yang	Behaviour of castellated beam-to-column end-plate connection under monotonic load	4616-4633
Zhao, Zhongwei / Dai, Bozhi / Xu, Hao / Li, Tianhe	Bending capacity of corroded welded hollow spherical joints with considering interaction of tension force and bending moment	2656-2664
Amponsah, Evans / Wang, Zhenyu / Kwame Mantey, Selase	Bending-bearing behaviour of embedded steel ring-foundation connection of onshore wind turbines	180-197
Gravina, Rebecca J. / Xie, Tianyu / Roychand, Rajeev / Zhuge, Yan / Ma, Xing / Mills, Julie E. / Youssf, Osama	Bond behaviour between crumb rubberized concrete and deformed steel bars	2115-2133
Lu, Jennifer / Afefy, Hamdy M. / Azimi, Hossein / Sennah, Khaled / Sayed-Ahmed, Mahmoud	Bond performance of sand-coated and ribbed-surface glass fiber reinforced polymer bars in high-performance concrete	10-19
Lv, Xiaoyong / Yu, Zhiwu / Shan, Zhi	Bond stress-slip model for rebar-concrete interface under monotonic and cyclic loading	498-506
Degtyarev, V. V. / Naser, M. Z.	Boosting machines for predicting shear strength of CFS channels with staggered web perforations	3391-3403
Ren, Chong / Liu, Xiaowei / He, Wenfu / Dai, Liusi	Buckling analyses of cold-formed steel Sigma sections in purlin-sheeting systems subjected to uniformly distributed uplift loading	2262-2275
Deng, Yanzhi / Zhou, Shurong / Li, Jingyao / Nie, Shidong / Liu, Peng	Buckling behaviour of Q460GJ welded H-section columns subjected to minor axis under axial compression	1416-1428
Deepak, M. S. / Ananthi, G. Beulah Gnana	Buckling capacities of Double-T-Box Girders – A numerical approach	4574-4595
Zhao, Caiqi / Zhou, Yunwen / Wang, Gang / Li, Haoyue / Wang, Yating	Calculation method of the bearing capacity of a novel modular joint of an aluminium alloy lattice shell structure	3268-3282
Cheng, Shitao / He, Haoxiang / Lan, Bingji	Calculation theory and damage analysis on crack width of RC seismic-damaged columns	3329-3344
Ribeiro, D. / Calçada, R. / Brehm, M. / Zabel, V.	Calibration of the numerical model of a track section over a railway bridge based on dynamic tests	4124-4141
Dabbaghi, Farshad / Sadeghi-Nik, Aref / Libre, Nicolas Ali / Nasrollahpour, Sepideh	Characterizing fiber reinforced concrete incorporating zeolite and metakaolin as natural pozzolans	2617-2627
Veggalam, Sahithi / Karthik Reddy, K. S. K. / Somala, Surendra Nadh	Collapse fragility due to near-field directivity ground motions: Influence of component, rupture distance, hypocenter location	3684-3702
Li, Lijun / Wang, Rui / Zhao, Hui / Zhang, Haoran / Yan, Rui	Combined effects of elevated temperatures and high strain rates on compressive performance of S30408 austenitic stainless steel	1-9
Jiménez-Alonso, Javier Fernando / Soria, José Manuel / Díaz, Iván M. / Guillen-González, Francisco	A common framework for the robust design of tuned mass damper techniques to mitigate pedestrian-induced vibrations in lively footbridges	1276-1290
Chen, Xuebin / Xu, Guoji / Lin, Chong / Sun, Hongwei / Zeng, Xiaofang / Chen, Zhengdong	A comparative study on lateral displacements of movable T-deck and Box-deck under solitary waves	1614-1635
Yang, Yekai / Wu, Chengqing / Liu, Zhongxian / Qin, Yuan / Wang, Weiqiang	Comparative study on square and rectangular UHPFRC-Filled steel tubular (CFST) columns under axial compression	2054-2068
Mirra, Gabriele / Pugnale, Alberto	Comparison between human-defined and AI-generated design spaces for the optimisation of shell structures	2950-2961
Ahmed, Mizan / Tran, Viet-Linh / Ci, Junchang / Yan, Xi-Feng / Wang, Fangying	Computational analysis of axially loaded thin-walled rectangular concrete-filled stainless steel tubular short columns incorporating local buckling effects	4652-4668
Hosseini, Mojtaba / Ahmadie Amiri, Hossein / Estekanchi, Homayoon E.	Consistent one-bay frame simplified model for efficient seismic evaluation of steel moment frame buildings with equal and unequal bay lengths	3345-3362
Jiao, Jinfeng / Liu, Zhanxiang / Guo, Qi / Liu, Yong / Lei, Honggang	Constant-amplitude fatigue behavior of M24 high-strength bolt of end-plate flange connection	2041-2053
Li, Rou / Miao, Changqing / Zhang, Yili / Wang, Yichun / Chen, Xianliang	Corrosion characteristics and damage constitutive model of galvanized steel wires for bridge cables	3414-3426
Couto, Carlos / Coderre, Tristan / Real, Paulo Vila / Boissonnade, Nicolas	Cross-section capacity of RHS and SHS at elevated temperatures: Comparison of design methodologies	198-214
Liu, H. Q. / Liu, Y. Z. / Huo, J. S. / Zhu, D. J.	Cyclic behaviour of a novel steel beam-to-prefabricated CFST column connection with threaded sleeve bolts	615-629
Li, Beibei / Wang, Jingfeng / Duan, Mengjun / Guo, Lei / Wang, Bo	Cyclic experimental and numerical analytical investigation of precast concrete frames with buckling-restrained braces considering various assembling connections	1135-1153
Wang, Yuke / Han, Musen / Cao, Tiancai / Yu, Xiang / Song, Yingbin	Cyclic interface behavior of non-water reactive polymer and concrete during dam restoration	748-757
He, Haoxiang / Chen, Yifei / Lan, Bingji	Damage assessment for structure subjected to earthquake using wavelet packet decomposition and time-varying frequency	449-461
Huang, He / Wang, Yifan / Li, Yugang	Damage assessment of single-layer reticulated domes subjected to mainshock-aftershock sequences based on structural damage factor	604-614
Li, R. W. / Wu, H. / Fang, Q. / Wang, D. F.	Damage evaluation and performance-based design of double-pier RC bridge subjected to vehicle collision	3141-3154
Liu, Gang / Jiang, Wei / Yang, Qingshan / Wang, Qi / Law, S. S.	Decentralized state feedback control of linear time-invariant system with free-interface substructures	4908-4919
Nguyen, Thanh Q.	A deep learning platform for evaluating energy loss parameter in engineering structures	1326-1345
Figueira, Diogo / Ashour, Ashraf / Yıldırım, Gürkan / Aldemir, Alper / Şahmaran, Mustafa	Demountable connections of reinforced concrete structures: Review and future developments	3028-3039
Jing, Zhao / Sun, Qin / Liang, Ke / Zhang, Yongjie	Design of curved composite panels for maximum buckling load using sequential permutation search algorithm	4169-4192
Bishay, Peter L. / Amirbekyan, Arshak J.	Design of periodic laminated composite beams in free vibration	2030-2040
Haghgou, Hossein / Alembagheri, Mohammad / Bigdeli, Ali	Determination of optimal intensity measure for probabilistic seismic demand analysis of intake towers	1998-2013
Meral, Emrah	Determination of seismic isolation effects on irregular RC buildings using friction pendulums	3436-3452
Talaeitaba, Sayed Behzad / Safaie, Mohamad / Zamani, Reza	Development and application of a new base isolation system in low-rise buildings	1684-1709
Shahiditabar, Akbar / Moharrami, Hamid	Development and experimental verification of self-centered y-shaped braced frame	1312-1325
Mello, Andre Felipe Aparecido / Mouta Trautwein, Leandro / Almeida, Luiz Carlos / Souza, Rafael Alves	Development of an open source library for reinforced concrete membrane element analysis	4882-4891
Malla, Niraj / Wijeyewickrema, Anil C.	Direct displacement-based design of coupled walls with steel shear link coupling beams	2746-2764
Artar, Musa / Carbas, Serdar	Discrete sizing design of steel truss bridges through teaching-learning-based and biogeography-based optimization algorithms involving dynamic constraints	3533-3547
Bradley, Cameron R. / Fahnestock, Larry A. / Hines, Eric M.	Dual system design for a low-ductility concentrically braced frame with a reserve moment frame	3315-3328
Nochebuena-Mora, Elesban / Mendes, Nuno / Lourenço, Paulo B. / Greco, Federica	Dynamic behavior of a masonry bell tower subjected to actions caused by bell swinging	1798-1810
Briseghella, Bruno / Fa, Guanzhe / Aloisio, Angelo / Pasca, Dag / He, Leqia / Fenu, Luigi / Gentile, Carmelo	Dynamic characteristics of a curved steel–concrete composite cable-stayed bridge and effects of different design choices	4669-4681
Pap, Zsuzsa B. / Kollár, László P.	The dynamic response of infinitely long constrained bars and its application for modelling SSI	875-885
Bao, Enhe / Tang, Zuhong / Liu, Huijuan / Li, Qi	Dynamic response of multi-story buckling-restrained braced steel frames with different β values	2308-2317
Li, Huile / Wang, Tianyu / Wu, Gang	Dynamic response prediction of vehicle-bridge interaction system using feedforward neural network and deep long short-term memory network	2415-2431
Liu, Kaifang / Liu, Lulu / Zhu, Qiankun / Liu, Yanhui / Zhou, Fulin	Dynamic testing and numerical simulation of human-induced vibration of cantilevered floor with tuned mass dampers	1475-1488
Bagheri, Mansour / Hosseini, Seyed Abbas / Keshtegar, Behrooz	Dynamical relaxed directional method for fuzzy reliability analysis	169-179
Fu, Qiang / Xu, Wenrui / Bu, Mengxin / Guo, Bingbing / Niu, Ditao	Effect and action mechanism of fibers on mechanical behavior of hybrid basalt-polypropylene fiber-reinforced concrete	3596-3610
Sonkar, Chanchal / Bhattacharyya, Sriman Kumar / Mittal, Achal Kumar	Effect of axial loading on cold-formed steel wall panels with fibre-cement and calcium silicate boards sheathing: Experimental and analytical studies	2218-2242
Güllü, Ahmet / Karameşe, Genco	Effect of building importance factor on seismic performance of rc frame type shopping malls subjected to pulse-like records	158-168
Prasanth, S. / Ghosh, Goutam	Effect of cracked section properties on the resilience based seismic performance evaluation of a building	1021-1033
Karimipour, Arash / Farhangi, Visar	Effect of EBR- and EBROG-GFRP laminate on the structural performance of corroded reinforced concrete columns subjected to a hysteresis load	1525-1544
Krishna, Arathi / Kaliyaperumal, Saravana Raja Mohan	Effect of elevated temperature on strength and ductility of axially loaded hybrid fiber reinforced concrete columns	3548-3556
Alothman, Aya / Mangalathu, Sujith / Hashemi, Javad / Al-Mosawe, Alaa / Alam, M. D. Morshed / Allawi, Abbas	The effect of ground motion characteristics on the fragility analysis of reinforced concrete frame buildings in Australia	3583-3595
Yavas, Altug / Ince, Mucahit	Effect of reinforcement ratio on flexural behavior of I-shaped UHPFRC beams	4457-4465
He, Jun / Xin, Haohui / Wang, Yingjun / Correia, José A. F. O.	Effect of temperature loading on the performance of a PC bridge in Oklahoma: Reliability analysis	51-60
He, Jun / Xin, Haohui / Wang, Yingjun / Correia, José A. F. O.	Effect of temperature loading on the performance of a prestressed concrete bridge in Oklahoma: Probabilistic modelling	1429-1442
Furtado, André / Rodrigues, Hugo / Arêde, António	Effect of the infill panels in the floor response spectra of an 8-storey RC building	2476-2498
Niknam, Behnam / Haji Aboutalebi, Farhad / Ma, Wenchen / Nejad, Reza Masoudi	Effect of variations internal pressure on cracking radiant coils distortion	4986-4998
Abdallah, Mohammad / Al Mahmoud, Firas / Khelil, Abdelouahab / Mercier, Julien	Efficiency of EB CFRP composites for flexural strengthening of continuous RC beams: A comparative study with NSM CFRP rods	1567-1588
Kaveh, Ali / Joudaki, Ali	Efficient analysis of block circulant structures	738-747
Majeed, Hakeem S. / Davids, William G. / Walton, Harold J.	Efficient second-order nonlinear finite-element simulation of concrete-filled FRP tubular arches	3738-3749
Movahedi Rad, Majid / Habashneh, Muayad / Lógó, János	Elasto-Plastic limit analysis of reliability based geometrically nonlinear bi-directional evolutionary topology optimization	1720-1733
Shao, Yahui / Wei, YuanYuan / Yang, Tao / Ni, Ming / Zhong, Jian	Empirical models of bridge seismic fragility surface considering the vertical effect of near-fault ground motions	2962-2973
Wang, Yonghui / Zhang, Rong / Liu, Suntao / Zhai, Ximei / Zhi, Xudong	Energy absorption behaviour of an aluminium foam-filled circular-triangular nested tube energy absorber under impact loading	95-104
Shabani, Mohammad Javad / Moghadam, Abdolreza Sarvghad / Aziminejad, Armin / Razzaghi, Mehran Seyed	Energy-based criteria for assessment of box-section steel columns against progressive collapse	2580-2591
Pu, Wuchuan / Wu, Ming	Energy-based estimation of ductility demand of slip-hysteretic timber house structures subjected to sequential earthquakes	4193-4203
Nawar, Mahmoud / Aboelfotouh, Mohamed / Eraky, Atef	Enhancing static resistance of steel stud wall systems for blast design using new section geometries	2367-2383
Farahani, Sina / Akhaveissy, Amir H. / Damkilde, Lars	Equivalent viscous damping for buckling-restrained braced RC frame structures	1229-1252
Cao, Yan / Zandi, Yousef / Rahimi, Abouzar / Petković, Dalibor / Denić, Nebojša / Stojanović, Jelena / Spasić, Boban / Vujović, Vuk / Khadimallah, Mohamed Amine / Assilzadeh, Hamid	Evaluation and monitoring of impact resistance of fiber reinforced concrete by adaptive neuro fuzzy algorithm	3750-3756
Tahmasebi, Amin / Rahimi, Mostafa	Evaluation of nonlinear static and dynamic analysis of steel braced frame buildings subjected to near-field earthquakes using FBD and DBD	1364-1372
Shi, Chen / Du, Yongfeng	Evaluation of the collapse mode of isolated structures subjected to multi-directional dynamic coupling excitation based on reliability theory	1261-1275
Luo, Qiang / Xu, Gang / Zhao, Juan / Wang, Qing	Evolution characteristics of secondary tensile mechanical properties of corroded rebars	3478-3486
Sabetifar, Hassan / Nematzadeh, Mahdi	An evolutionary approach for formulation of ultimate shear strength of steel fiber-reinforced concrete beams using gene expression programming	4965-4976
Joel Shelton, J. / Venkata Naresh, Y. / Arun Solomon, A. / Daniel, C.	Experimental and analytical investigation of geo-grid confined RC beams with glass fiber reinforced concrete	487-497
Hossain, Khandaker M. A. / Jahan, Asmah / Mol, Lukas	Experimental and analytical investigation on shear behavior of profiled steel sheet dry board composite wall system	3945-3957
BehkamRad, Kaveh / Azizi, Mahdi	Experimental and analytical investigations of a novel energy dissipation device for seismic protection of engineering structures	1201-1211
Yin, Fei / Wang, Ru-wei / Cao, Wan-lin / Zhao, Yang / Song, Yu	Experimental and analytical research on steel reinforced high-strength concrete columns with different steel sections	4350-4363
Mohamed, Ihab Ramadan Moustafa / Safar, Sherif Saleh	Experimental and numerical investigation on torsion strength of light gauge SHS strengthened with CFRP wraps	2818-2839
Chybiński, Marcin / Polus, Łukasz	Experimental and numerical investigations of aluminium-timber composite beams with bolted connections	1942-1960
Li, Shucai / Lu, Wei / Sun, Huibin / Luan, Yingcheng	Experimental and numerical research on fabricated joint for CFST set in underground construction	1291-1299
Tian, JianBo / Wang, Mengmeng / Liu, Jie / Guo, Hongchao / Wang, Zhenshan / Zhang, Junfa	Experimental and numerical study of continuous span concrete composite slabs	827-839
Siciliano, Alfio Francesco / Škec, Leo / Fossetti, Marinella / Jelenić, Gordan	Experimental and numerical study on the compressive behaviour of partially accessible concrete columns strengthened by a layer of high-performance concrete	4100-4112
Dabiri, Hamed / Kheyroddin, Ali	An experimental comparison of RC beam-column joints incorporating different splice methods in the beam	1603-1613
Gu, Yitong / Zhang, Changyong / Li, Huaifeng / Li, Han / Dang, Xinzhi / Yuan, Wancheng	Experimental evaluation of seismic performance of Coiled Cable Restrainer on bridges isolated by Unbonded laminated rubber bearings	3376-3390
Fadlelmola, A. Basit F. Alla / Chen, Zhihua / Du, Yansheng / Ma, Rui / Ma, Jia	Experimental investigation and design method on a lightweight bamboo-concrete sandwich panel under bending load	856-874
Naseri, Hamid / Showkati, Hossein / Zirakian, Tadeh	Experimental investigation of geometrical and physical behaviors of thin-walled steel tanks subjected to local support settlement	413-422
Davodikia, Behzad / Saghafi, Mohammad Hossein / Golafshar, Ali	Experimental investigation of grooving method in seismic retrofit of beam-column external joints without seismic details using CFRP sheets	4423-4434
Albutainy, Mohammed / Galal, Khaled	Experimental investigation of reinforced concrete masonry shear walls with C-shaped masonry units boundary elements	3667-3683
Rajabzadeh Gatabi, Hamed / Celikag, Murude / Bengar, Habib Akbarzadeh	Experimental investigation of steel fibers effect on the cyclic behavior of flexural members with moderate ductility	2530-2543
Chen, Fubin / Wang, Weijia / Zhou, Jinfang / Shu, Zhenru / Li, Qiusheng	Experimental investigation of wind pressure characteristics and aerodynamic optimization of a large-span cantilevered roof	303-313
Far, Harry / Nejadi, Shami	Experimental investigation on interface shear strength of composite PVC encased macro-synthetic fibre reinforced concrete walls	729-737
Yang, Jian / Liang, Shuting / Zhu, Xiaojun / Dang, Longji / Wang, Jialei / Tao, Jinxin	Experimental research and finite element analysis on the seismic behavior of CFRP-strengthened severely seismic-damaged RC columns	3968-3981
Zhang, Pu / Su, Yan-Li / Fan, Jia-Jun / Feng, Hu / Shao, Jinggan / Guo, Hui / Gao, Dan-Ying / Sheikh, Shamim Ahmed	Experimental research on the mechanical behavior of grouted sleeves with fiber-reinforced grouting material under cyclic loading	2189-2204
Xia, Kang / Hu, Xiang / Xue, Weichen	Experimental studies on in-plane connections of composite beam-precast concrete shear wall under reversed cyclic loading	1961-1972
Lun, Pei-Yuan / Lu, Zhao-Hui / Zhang, Xiao-Gang / Zhang, Qiang / Zhao, Ran	Experimental study and suggested mathematical model for chloride-induced reinforcement corrosion rate	2014-2029
Ahmadpour, F. / Zeinoddini, M. / Mo'tamedi, M. / Rashnooie, R.	Experimental study of fire effects on out-of-plane bending strength/flexibility of steel tubular T-joints	2174-2188
Li, Wanrun / Gao, Haiwang / Xiang, Rongjiang / Du, Yongfeng	Experimental study of seismic performance of precast shear wall with a new bolt-plate connection joint	3818-3833
Chen, Zhihua / Niu, Xiangyuan / Liu, Jiadi / Khan, Kashan	Experimental study of thin-walled steel-timber single-shear connection with a self-tapping screw	4389-4405
Ma, Jinfeng / Zhu, Jianing / Bai, Guoliang / Zheng, Wei	Experimental study on anchorage performance of steel bar-corrugated pipe grouted connection	1834-1842
Liu, Ruyan / Hua, Dongjie / Chen, Kejing	Experimental study on interaction between rock granular flow and different structural forms of rigid retaining walls	3557-3566
Xue, Weichen / Hu, Xinyu / Song, Jiazheng	Experimental study on seismic behavior of precast concrete beam-column joints using UHPC-based connections	4867-4881
Dong, Yang / Jia, Lianguang / Xu, Feng / Li, Xianchao	Experimental study on seismic behavior of steel structure with cellular beams and composite concrete slab	507-522
Eskandari Nasab, Mohammad Seddiq / Javidan, Mohammad Mahdi / Chun, Seungho / Kim, Jinkoo	Experimental study on seismic retrofit of a RC frame using viscoelastic dampers	771-786
Ming, Ming / Zheng, Shansuo / Zhang, Yixin / Zheng, Yue / Yang, Song / Song, Mingchen	Experimental study on the bond-slip behavior and stress transfer mechanism between shaped steel and high-performance fiber-reinforced concrete	5013-5028
Xin, Haohui / Tarus, Iulia / Cheng, Lu / Veljković, Milan / Persem, Nicolas / Lorich, Laurent	Experiments and numerical simulation of wire and arc additive manufactured steel materials	1393-1402
Somala, Surendra Nadh / Chanda, Sarit / Karthikeyan, Karthika / Mangalathu, Sujith	Explainable Machine learning on New Zealand strong motion for PGV and PGA	4977-4985
Sun, W. / Achintha, M.	Exploitation of FRP fabric Reinforcement: Innovation beyond FRP bars	1099-1107
Van Cao, Vui	External GFRP confinement to decrease near-fault earthquake damage of reinforced concrete structures considering soil-structure interaction	2318-2339
Wang, Lei / Shi, Fen / Chen, Kai / Tang, Yi / Hao, Wei	A fabrication method of continuous aero-model for high chimney	3716-3723
Doyle, Tobias / Wheatley, Greg / Nejad, Reza Masoudi / Sina, Nima	Fatigue reliability assessment of the new design of universal upright for the JCU Formula SAE car	4113-4123
Liu, Wei / Ikago, Kohju	Feasibility study of a passive rate-independent damping device for the seismic protection of low-frequency structures	2499-2514
Vipin, K. T. / Ganesan, N. / Indira, P. V.	Ferro-geopolymer composites for roofing – A sustainable approach for infrastructures	215-223
Zakian, P. / Nadi, M. / Tohidi, M.	Finite cell method for detection of flaws in plate structures using dynamic responses	327-338
Fang, Zhiyuan / Roy, Krishanu / Chi, Yaohui / Chen, Boshan / Lim, James B. P.	Finite element analysis and proposed design rules for cold-formed stainless steel channels with web holes under end-one-flange loading	2876-2899
Calayır, Yusuf / Yetkin, Musa / Erkek, Hakan	Finite element model updating of masonry minarets by using operational modal analysis method	3501-3507
Saremi, Emad / Toopchi-Nezhad, Hamid	Finite element modeling of horizontal load-displacement hysteresis loops in unbonded elastomeric isolators	2987-2995
Khan, Mustesin Ali / Khan, Aatif Ali / Domada, Ramakanth / Usmani, Asif	Fire hazard assessment, performance evaluation, and fire resistance enhancement of bridges	4704-4714
Perera, Dilini / Poologanathan, K. / Gatheeshgar, P. / Upasiri, I. R. / Sherlock, P. / Rajanayagam, H. / Nagaratnam, B.	Fire performance of modular wall panels: Numerical analysis	1048-1067
Zhou, Xuhong / Yang, Jingjie / Liu, Jiepeng / Wang, Shang / Wang, Weiyong	Fire resistance of thin-walled steel tube confined reinforced concrete middle-length columns: Test and numerical simulation	339-355
Mousa, E. A. / El-Boghdadi, M. H. / Yossef, N. M.	Flange yield and load/deflection in plate girders with different types of end stiffeners	3915-3930
Ahmad, Adil / Singh, Yogendra	Flexural behavior of Expanded Polystyrene core Reinforced Concrete Sandwich Panels with different construction methods and end conditions	2900-2911
Meng, Xin / Gardner, Leroy	Flexural buckling of normal and high strength steel CHS columns	4364-4375
Ren, Junwei / Xu, Quanbiao / Chen, Gang / Liu, Chengbin / Gong, Shunfeng / Lu, Yong	Flexural performance of pretensioned centrifugal spun concrete piles with combined steel strands and reinforcing bars	4467-4485
Ahmed, Khondaker Sakil / Habib, Md Ahsan / Asef, Md Farhan	Flexural response of stainless steel reinforced concrete beam	589-603
Kodsy, Antony / Morcous, George	Flexural strength prediction models of non-prestressed Ultra-High Performance Concrete (UHPC) components	4532-4547
Liu, Dejun / Xia, Zhiheng / Wang, Jun / Zuo, Jianping	Flexural strengthening mechanism of concrete-filled steel tube beam by welding round steel at soffit of the beam	2243-2261
Emad, Wael / Salih, Ahmed / Kurda, Rawaz	Forecasting the mechanical properties of soilcrete using various simulation approaches	653-665
Cima, Valentina / Tomei, Valentina / Grande, Ernesto / Imbimbo, Maura	Fragility curves at regional basis for unreinforced masonry buildings prone to out-of-plane mechanisms: the case of Central Italy	4774-4787
Kwak, Songhun / Kim, Kwanghun / Yun, Jongguk / Kim, Sok / Ri, Phyongchol	Free vibration analysis of laminated closed conical, cylindrical shells and annular plates with a hole using a meshfree method	3070-3086
Li, Hao / Wei, Yang / Wang, Libin	A general model for predicting the off-axis performance of fiber reinforced composite materials	2087-2097
Islam, M. Shahidul / Shahnewaz, Md / Shahria Alam, M.	Glass fiber reinforced Polymer (GFRP) retrofitting of timber I-Joists with opening and notch	804-826
Wang, Ning / Huang, Xiaoning	Global damage model for the seismic reliability analysis of a base‐isolated structure	4892-4907
Liang, Jiaming / Li, Zhanchao / Ji, Qingfeng / Lu, Weigang / Cao, Qiulin / Ahmed, Eladly	Global sensitivity analysis of the deformation behavior of sluice chamber structure	4682-4693
Abedin, Mohammad / Mehrabi, Armin B.	Health monitoring of steel box girder bridges using non-contact sensors	4012-4024
Zhou, Qiaoling / Su, Mingzhou / Shi, Yun / Guan, Lingyu / Lian, Ming / Jiang, Lu / Yang, Yukun / Zhang, Lili	Hysteretic behavior of the hybrid coupled partially encased composite wall system	4216-4236
Chen, Lei / Shan, Wubin / Liu, Peng	Identification of concrete aggregates using K-means clustering and level set method	2069-2076
Zhao, Wuchao / Ye, Jihong	Impact force characteristic and mechanical behavior of trucks in collisions against bridge piers	1489-1506
Kaveh, A. / Rezazadeh Ardebili, Sh.	An improved plasma generation optimization algorithm for optimal design of reinforced concrete frames under time-history loading	758-770
Alehojjat, Seyed Behdad / Bahar, Omid / Yakhchalian, Masood	Improvements in the direct displacement-based design procedure for mid-rise steel MRFs equipped with viscous dampers	1636-1650
Li, Tong / Deng, Mingke / Ma, Yuren / Zhang, Yangxi	In-plane behavior of URM wall with openings strengthened with ECC subjected to cyclic load	2765-2776
Zhou, Junyong / Hu, Cuimin / Zhang, Junping / Huang, Haiyun	Incorporating the unevenness of lane truck loading into fatigue load modeling of multi-lane bridges	1746-1760
Deringöl, Ahmet Hilmi / Güneyisi, Esra Mete	Influence of nonlinear fluid viscous dampers in controlling the seismic response of the base-isolated buildings	1923-1941
Dhuria, Mohit / Grover, Neeraj / Goyal, Kavita	Influence of porosity distribution on static and buckling responses of porous functionally graded plates	1458-1474
Lam, Chi Chiu / Cai, Jingming / Gu, Jiaming / Zhang, Yufei	The influence of rounded corners on the performance of single-coped beam with slender web	4297-4307
Wei, Biao / Zhuo, Yi / Hu, Zhangliang / Li, Shanshan / He, Xuhui / Xiao, Chun	Influence of site conditions on structural vulnerability of a super high three-tower cable-stayed bridge	3882-3893
Farsi, A. / Amiri, H. R. / Dehghan Manshadi, S. H.	An innovative C-shaped yielding metallic dampers for steel structures	4254-4268
Chakraborty, Sumeet / Dey, Tanish / Kumar, Rajesh	Instability characteristics of damped CNT reinforced laminated shell panels subjected to in-plane excitations and thermal loading	2936-2949
Laccone, Francesco / Malomo, Luigi / Pietroni, Nico / Cignoni, Paolo / Schork, Tim	Integrated computational framework for the design and fabrication of bending-active structures made from flat sheet material	979-994
Bechert, Simon / Sonntag, Daniel / Aldinger, Lotte / Knippers, Jan	Integrative structural design and engineering methods for segmented timber shells - BUGA Wood Pavilion	4814-4833
Al Shboul, Khalid W. / Rasheed, Hayder A. / Alshareef, Husam A.	Intelligent approach for accurately predicting fatigue damage in overhead highway sign structures	3453-3463
Li, Ke / Zhao, Dapeng / Wang, Xinling / Feng, Hu / Zou, Xuyan	Investigation of crack growth in CFRP-concrete interface under fatigue loading	356-367
Jain, Saumitra / Pujari, Sumiran / Laskar, Arghadeep	Investigation of one dimensional multi-layer periodic unit cell for structural base isolation	2151-2163
Mashhadiali, Niloufar / Molaei, Fatemeh / Siavoshi, Hossein	Investigation of shear lag effect in tall tube-type buildings	4204-4215
Bai, Qiangqiang / Chen, Jian	An iterative FEM approach for tunnel shape optimization based on the concept of rational arch axis	4634-4651
Burton, C. / Visintin, P. / Griffith, M. / Vaculik, J.	Laboratory investigation of pull-out capacity of chemical anchors in individual new and vintage masonry units under quasi-static, cyclic and impact load	901-930
Babaei, Hadi	Large deflection analysis of FG-CNT reinforced composite pipes under thermal-mechanical coupling loading	886-900
Hassanli, Reza / Vincent, Thomas / Manalo, Allan / Smith, Scott T. / Gholampour, Aliakbar / Gravina, Rebecca	Large-scale experimental study on pocket connections in GFRP-reinforced precast concrete frames	523-541
Rostami, Afshin / Poursha, Mehdi	A lateral load distribution for the static analysis of base-isolated building frames under the effect of far-fault and near-fault ground motions	2384-2405
Ling, Zhibin / Rong, Xiuqiang / Xiang, Zhe	Laterally loaded performance of single dowel-type fastener used for steel plate-to-timber connections	1985-1997
Khansefid, A.	Lifetime risk-based seismic performance assessment of buildings equipped with supplemental damping and base isolation systems under probable mainshock-aftershock scenarios	3647-3666
Molkens, Tom / Rossi, Barbara	Linear elastic mode-based reliability approach for single-bay portal frames	2205-2217
Xu, Zhaoyu / Tong, Genshu / Zhang, Lei / Guo, Yong	Local and distortional buckling of extruded aluminium alloy lipped angle columns	3894-3905
Deepak, M. S. / Ananthi, G. Beulah Gnana	Local buckling behaviour and capacities of Cold-Formed Steel Double-I-Box stub and short column sections	1761-1784
Radwan, M. / Kövesdi, B.	Local plate buckling type imperfections for NSS and HSS welded box-section columns	2628-2643
Zhang, Ai-Lin / Qiu, Ping / Jiang, Zi-qin / Li, Ran / Zhang, Xue-Feng	Low-cycle reciprocating loading test of Earthquake-resilient prefabricated steel frame with double FCPs	3982-3995
Xu, Yan / Zhang, Mingyu / Yang, Sen / Zheng, Baofeng	Measurement and qualification of welded I-column failure mode using laser scanning technique	2694-2707
Cao, Jixing / Xiong, Haibei / Chen, Jiawei	Mechanical performance of timber-concrete bolted connections under cyclic loading	3464-3477
Ran, Jinlin / Li, Tingchun / Chen, Dianhao / Shang, Liming / Li, Weiteng / Zhu, Qingwen	Mechanical properties of concrete reinforced with corrugated steel fiber under uniaxial compression and tension	1890-1902
Wang, Xinyu / Zhou, Ting / Chen, Zhihua / Zhou, Xiaohui / Zhang, Pengfei / Zhang, Xiangyong	Mechanical properties of L-shaped column frame combined with shear wall	4920-4935
Feng, Lifei / Sun, Tianshu / Ou, Jinping	Method of determining the minimum number of stiffeners for stiffened corrugated steel walls	3487-3500
Almutairi, Mohammad / Nikitas, Nikolaos / Abdeljaber, Osama / Avci, Onur / Bocian, Mateusz	A methodological approach towards evaluating structural damage severity using 1D CNNs	4435-4446
Zhai, Yu-Jia / Ma, Zhi-Sai / Chang, Hong-Zhen / Ding, Qian	Model order reduction and dynamic characteristic analysis of the bolted flange structure with free-free boundaries	149-157
Kisi, Ozgur / Mansouri, Iman / Awoyera, Paul O. / Lee, Chang-Hwan	Modeling flexural overstrength factor for steel beams using heuristic soft-computing methods	3238-3246
Nastri, Elide / Rescigno, Francesco / Montuori, Rosario / Piluso, Vincenzo	Modelling non-linear behaviur of aluminium alloy gusset joints for single layer lattices domes	4511-4523
Abu-Salma, Deema / Vollum, Robert L. / Macorini, Lorenzo	Modelling punching shear failure at edge slab-column connections by means of nonlinear joint elements	630-652
Chen, Ju / Zhang, Haipeng / Yu, Qian-Qian	Monotonic and fatigue behavior of steel-concrete composite beams subjected to corrosion	1973-1984
Wenwen, Chen / Jihong, Ye	The most adverse fire scenario research of steel frame structure fire-resistant design based on structural vulnerability analysis	2861-2875
Yoshitake, Isamu / Hasegawa, Hiroaki	Moving-wheel fatigue durability of cantilever bridge deck slab strengthened with high-modulus CFRP rods	2406-2414
Ghasemof, Ali / Mirtaheri, Masoud / Mohammadi, Reza Karami / Mashayekhi, Mohammad Reza	Multi-objective optimal design of steel MRF buildings based on life-cycle cost using a swift algorithm	4041-4059
Ahadzadeh Kolour, Narges / Basim, Mohammad Charkhtab / Chenaghlou, Mohammadreza	Multi-objective optimum design of nonlinear viscous dampers in steel structures based on life cycle cost	3776-3788
Azad, Saeid Kazemzadeh / Aminbakhsh, Saman / Shaban, Samer S. S.	Multi-stage guided stochastic search for optimization and standardization of free-form steel double-layer grids	678-699
Kahya, Volkan / Okur, Fatih Yesevi / Karaca, Sebahat / Altunişik, Ahmet Can / Aslan, Mustafa	Multiple damage detection in laminated composite beams using automated model update	1665-1683
Helaili, Sofiene / Chafra, Moez / Chevalier, Yvon	Natural fiber alfa/epoxy randomly reinforced composite mechanical properties identification	542-549
Abdelaleem, Tarek / Diab, Hesham M. / Rashwan, Mohamed M. M.	New aspects about the effect of critical regions reinforcement on the strength and moment redistribution of RC continuous T-beams (Experimental and numerical study)	4834-4850
Solhmirzaei, Arash / Tahamouli Roudsari, Mehrzad / Hosseini Hashemi, Behrokh	A new detail for the panel zone of beam-to-wide flange column connections with endplate	1108-1123
Lu, Zhao-Hui / Zhou, Qi-Hao / Li, Hai / Zhao, Yan-Gang	A new empirical model for residual flexural capacity of corroded post-tensioned prestressed concrete beams	4308-4321
He, Zhongying / Yang, Heng / Zhu, Jinyong / Pang, Yutao	A new energy balance-based method for evaluating seismic performance of isolated bridges under near-fault ground motions	3724-3737
Li, Benben / Zhan, Yang	A new joint-slippage model for galvanized steel bolted joints with slippage	1034-1047
Pallares-Muñoz, Myriam R. / Payá-Zaforteza, Ignacio / Hospitaler-Pérez, Antonio	New modeling strategies for analyzing lateral-torsional buckling in class-4 steel structural members at elevated temperatures using beam-type elements	3508-3532
Kheirollahi, Mohammad / Abedi, Karim / Reza Chenaghlou, Mohammad	A new pushover procedure for estimating seismic demand of double-layer barrel vault roof with vertical double-layer walls	1507-1524
Tung, Pham Thanh / Van Long, Nguyen / Tu, Tran Minh / Phuong, Nguyen Thi Bich / Hai, Le Thanh / Long, Tran Ngoc	Nonlinear bending analysis of fgp plates under various boundary conditions using an analytical approach	4803-4813
Zakir, Mohammad / Sofi, Fayaz A. / Behera, Siddharth	Nonlinear finite element analysis of circular stiffened FRP-concrete-steel double-skin tubular columns (DSTCs) and experimental compressive behavior of multiple DSTC shapes	3283-3299
Zampieri, Paolo / Tetougueni, Cyrille Denis / Pellegrino, Carlo	Nonlinear seismic analysis of masonry bridges under multiple geometric and material considerations: Application to an existing seven-span arch bridge	78-94
Murad, Yasmin / Abu-AlHaj, Tareq	Novel 3D printed bars for retrofitting heat damaged RC beams	3427-3435
Zhou, Yiyi / Gao, Yuan / Wang, Chun-Lin / Chen, Lian-Meng	A novel brace with partial buckling restraint: Parametric studies and design method	1734-1745
Liu, Wei / Guo, Wenhua	A novel predictor–corrector explicit integration scheme for structural dynamics	2735-2745
Cui, Ming-Zhu / Ren, Wei-Xin / Yin, Yong-Gao	Numerical analysis and field load testing of a suspension bridge with a root pile anchorage	1373-1382
Zhang, Lei / Yang, Shuang-Long / Tong, Gen-shu / Tong, Jing-Zhong	Numerical analysis on concrete-filled wide rectangular steel tubular (CFWRST) stub columns under axial compression	4715-4730
Yaman, Mustafa / Şansveren, Mehmet Fatih	Numerical and experimental vibration analysis of different types of adhesively bonded joints	368-380
Ma, Zhu / Shi, Chang-Zheng / Wu, He-Gao	Numerical cracking analysis of steel-lined reinforced concrete penstock based on cohesive crack model	4694-4703
Feng, Jian / Ren, Shuxuan / Zhang, Qian / Xu, Yixiang / Li, Jianyu / Cai, Jianguo	Numerical investigation on the buckling behavior of damaged steel members constrained by outer tubes	1068-1079
Liu, Hai-Xin / Fang, Han / Zhu, Jiong-Yi / Chan, Tak-Ming	Numerical investigation on the structural performance of octagonal hollow section columns	3257-3267
Andrade, Pedro / Santos, José / Maia, Lino	Numerical methods to predict human induced vibrations on low frequency stairs. Part 1: Literature review, modelling	575-588
Andrade, Pedro / Santos, José / Escórcio, Patrícia	Numerical methods to predict human induced vibrations on low frequency stairs. Part 2: Evaluation by comparing with experimental data	1008-1020
Naserpour, Afshin / Fathi, Mojtaba	Numerical study of demountable shear wall system for multistory precast concrete buildings	700-715
Luo, Qirui / Wang, Wei / Wang, Bingjie / Xu, Shanwen / Sun, Zhuangzhuang	Numerical study on interface optimization of new-to-old concrete with the slant grooves	381-399
Kazemi, Mostafa / Madandoust, Rahmat / Chastre, Carlos / Esfahani, Mohammad Reza / Courard, Luc	Numerical study on the flexural behaviour of normal- and high-strength concrete beams reinforced with GFRP bar, using different amounts of transverse reinforcement	3113-3124
Galano, Simone / Calabrese, Andrea / Losanno, Daniele	On the response of fiber reinforced elastomeric isolators (FREIs) under bidirectional shear loads	2340-2354
Galeotti, Claudio / Gusella, Federico / Orlando, Maurizio / Spinelli, Paolo	On the seismic response of steel storage pallet racks with selective addition of bolted joints	3806-3817
Sakai, Yusuke / Ohsaki, Makoto	Optimization method for shape design of Auxetic Bending-Active Gridshells using discrete differential geometry	1589-1602
Brambila de Salles, Humberto / Miguel, Leandro Fleck Fadel / Lenzi, Marcos Souza / Lopez, Rafael Holdorf	A Padé-based fast frequency sweep approach for irregular large-scale building models subjected to seismic excitation	4376-4388
Wu, Tao / Sun, Ying / Cao, Zhenggang	Parameter determination of constitutive relationship of 3004H24 aluminum alloy based on ductile damage model	4447-4456
Sistla, Saiteja / Mohan, S. C.	Parametric studies and application of fibre reinforced elastomeric isolators to low-rise buildings	2679-2693
Becerra, Humberto C. / Silva, Amilton R.	Parametric study using a curved shell finite element to dynamic analysis of footbridge under rhythmic loading	135-148
Marinho, Anderson Patrick Machado / Krahl, Pablo Augusto / Almeida, Saulo José de Castro / Pereira, Margot Fabiana / Siqueira, Gustavo Henrique	Parametrical analysis of partially encased composite columns with fiber reinforced concrete subjected to uniaxial and biaxial non-constant bending moments	1872-1889
Song, Ge / Yang, T. Y. / Zhou, Ying	Performance evaluation of self-centering rocking shear walls: Part 1 — Quantification of structural damages	2515-2529
Song, Ge / Yang, T. Y. / Zhou, Ying	Performance evaluation of self-centering rocking shear walls: Part 2 — Determination of performance objectives	3404-3413
Li, Wei / Li, Wei-Jie / Xu, Li-Feng / Wang, Fa-Cheng	Performance of CFDST beams using high-strength steel under bending	2644-2655
Xu, Qizhi / Lu, Kaiwei / Wang, Jingquan / Yao, Yiming	Performance of large-diameter studs in thin ultra-high performance concrete slab	4936-4951
Hejazi, Mehrdad / Baranizadeh, Saeid / Daei, Maryam	Performance of Persian brick masonry single-shell domes subjected to uniform pressure and concentrated load	1710-1719
Hasanzadeh, Mohsen / Rezaifar, Omid / Gholhaki, Majid / Sharbatdar, Mohammad Kazem	Performance optimization of ground rubberized green concrete with metakaolin	433-448
Amoussou, Cossi Prosper Dagbo / Lei, Honggang / Halabi, Yahia / Alhaddad, Wael	Performance-based seismic design methodology for tall buildings with outrigger and ladder systems	2288-2307
Cacho-Pérez, M. / Gómez-Carretero, J.	Plastic calculation of slender beam frames systematic method based on mechanism theory	2840-2847
Lou, H. P. / Ye, J. / Jin, F. L. / Gao, B. Q. / Wan, Y. Y. / Quan, G.	A practical shear wall layout optimization framework for the design of high-rise buildings	3172-3195
Sun, WeiWei / Feng, Jun / Mao, Fengtao	Pressure distribution of central cone silos during filling and discharge: Multi-scale experimental study	42-50
Sangaki, Amir Hossein / Rofooei, Fayaz R. / Vafai, Hassan	Probabilistic integrated framework and models compatible with the reliability methods for seismic resilience assessment of structures	4086-4099
Dang, Hung V. / Trestian, Ramona / Bui-Tien, Thanh / Nguyen, Huan X.	Probabilistic method for time-varying reliability analysis of structure via variational bayesian neural network	3703-3715
Chen, Liang / Sun, Tianyue / Hu, Ke / Zhong, Jian	Probabilistic seismic assessment of a new elastoplastic column-deck joint on the prefabricated frame-bridge	3099-3112
Malekizadeh, Mohammad / Fanaie, Nader / Pirasteh, Ali Akbar	Probabilistic seismic assessment of steel gabled frames with web-tapered members under near-fault ground motions along strike-normal and strike-parallel components	4142-4157
Zhao, Chunfeng / Yu, Na / Peng, Tao	Probabilistic seismic fragility assessment of isolated nuclear power plant structure using IDA and MSA methods	1300-1311
Moslemi, Abdollah / Navayi neya, Bahram / Davoodi, Mohammad-Reza / Dehestani, Mehdi	Proposing and finite element analysis of a new composite profiled sheet deck – Applying PU and PVC and stability considerations	3040-3054
Hasanzadeh, Rana / Ahmadi, Jamal / Eghbali, Mahdi / Samadian, Delbaz / Salmanmohajer, Hamidreza	Reduction of seismic resiliency of RC structures caused by chloride corrosion for typical school buildings located in hot climates	4060-4076
Tsarpalis, P. / Vayas, I. / Thanopoulos, P. / Vamvatsikos, D.	Rehabilitation of reinforced concrete building using the fuseis beam-link system	3300-3314
Moghtadernejad, Nima / Jamshidi, Morteza / Maheri, Mahmoud R. / Keong, Choong Kok	Repair of post-heated short rectangular reinforced concrete columns with FRP jackets	4269-4283
Zhang, Wen-Ming / Qian, Kai-rui / Ge, Yao-Jun	Research on flutter-mode transition of a triple-tower suspension bridge based on structural nonlinearity	787-803
Gang, WANG / Caiqi, Zhao	Research on the M-θ model considering the effect of axial force and bolt clearance of flower-gusset composite joints	2164-2173
Xu, Jun / Zhang, Zhile / Wu, Taotao	Residual fatigue lives assessment of riveted lap joints based on a crack growth model	1383-1392
Meskenas, A. / Ramanauskas, R. / Sokolov, A. / Bacinskas, D. / Kaklauskas, G.	Residual stress – strain relations inversely derived from experimental moment – curvature response of RC beams with fibres compared to the recommendations of design codes	3363-3375
Kashani, Mohammad Mehdi / Saiidi, Saiid / Eberhard, Marc O.	Resilience-Based Design for Next-Generation Bridge Design and construction	4466
Barkhordari, Mohammad Sadegh / Tehranizadeh, Mohsen	Response estimation of reinforced concrete shear walls using artificial neural network and simulated annealing algorithm	1155-1168
Murad, Yasmin Zuhair / Alseid, Bara' Hani	Retrofitting interior RC beam-to-column joints subjected to quasi-static loading using NSM CFRP ropes	4158-4168
Chen, Zhao	A review of current research progress on tensile behavior of expansion anchors in concrete	2276-2287
Xiao, Manyu / Mukherjee, Sougata / Raghavan, Balaji / Dutta, Subhrajit / Breitkopf, Piotr / Zhang, Weihong	Revisiting p-refinement in structural topology optimization	3640-3646
Das, Sourav / Chakraborty, Arunasis	Robust design of MR elastomer for optimal isolation against non-stationary ground motion	4999-5012
Wang, Hongxin / Chen, Zhonggao / Wen, Guilin / Ji, Guohua / Xie, Yi Min	A robust node-shifting method for shape optimization of irregular gridshell structures	666-677
Kita, Alban / Lupattelli, Arianna / Venanzi, Ilaria / Salciarini, Diana / Ubertini, Filippo	The role of seismic hazard modeling on the simplified structural assessment of an existing concrete gravity dam	4560-4573
Yang, Lianping / Wang, Meng / Wei, Shen / Yu, Shaole	Rotating performance of Temcor joints for aluminum single-layer reticulated shells	1346-1363
Ruiz-García, Jorge / Olvera, Roberto N. / Frías, Ariel D.	Seismic assessment of school buildings with short captive RC columns under subduction seismic sequences	2432-2444
Du, Yansheng / Zhang, Yutong / Chen, Zhihua / Dong, Shaohua / Deng, Xiao-Fang / Qian, Kai	Seismic behavior of CFRP confined rectangular CFST columns using high-strength materials: Numerical analysis and restoring force model	4237-4253
Dong, Hongying / Qin, Jia / Chen, Zheng / Cao, Wanlin / Tang, Yunpeng	Seismic behavior of full-scale square high-strength RACFST columns	2600-2616
Zhang, Jianwei / Liu, Yujun / Chen, Zeqiao / Cai, Ruxing / Li, Xiangyu	Seismic behavior of high-strength concrete-filled square steel tube columns reinforced with ultrahigh-strength reinforcing bars	3125-3140
Rong, Xian / Zhang, Xiaowei / Zhang, Jianxin	Seismic behavior of innovation steel-embedded precast concrete beam-to-column joints	4952-4964
Dong, Hongying / Liang, Xu / Cao, Wanlin / Guo, Huazhen / Yin, Fei	Seismic behavior of large-size encased cross-section steel-reinforced high-strength concrete circular columns	1169-1184
Yin, Fei / Wang, Ru-wei / Cao, Wan-lin / Qiao, Qi-Yun / Ye, Tao-ping / Ren, Lele	Seismic behavior of light weight CFST frame-fabricated single row reinforced shear wall structures	4486-4499
Cong, Shuping / Zhang, Zheng / Zheng, Qi / Xu, Zhifeng	Seismic behavior of reinforced concrete frame staircase with separated slab stairs	4284-4296
Salameh, Molham / Shayanfar, Mohsenali / Barkhordari, Mohammad Ali	Seismic displacements and behaviour factors assessment of an innovative steel and concrete hybrid coupled shear wall system	20-41
Zhang, Chao / Lu, Jianbin / Wang, Piguang / Lai, Zhichao / Jia, Hongyu / Wu, Chengwang	Seismic fragility analysis of sea-crossing continuous rigid frame bridges based on fuzzy failure	120-134
Wang, J. H. / Sun, Y. P. / Takeuchi, T.	Seismic fragility and post-earthquake reparability of circular reinforced concrete bridge columns with low-bond high-strength reinforcements	840-855
Yildizlar, Baris	Seismic performance analysis and rehabilitation applications for a historical masonry building through field works and experimental investigations	1811-1833
Kenan, Hamit / Azeloglu, C. Oktay	Seismic performance analysis of tower crane mast types with different bracing configurations	286-302
Mohammadi, Majid / Mirzaei, Moein / Pashaie, Mohammad Reza	Seismic performance and fragility analysis of infilled steel frame structures using a new multi-strut model	1403-1415
Aggarwal, Yati / Saha, Sandip Kumar	Seismic performance assessment of reinforced concrete hilly buildings with open story	224-238
Zhao, Jianchen / Qiu, Hongxing / Sun, Jian / Jiang, Hongbo	Seismic performance evaluation of different strategies for retrofitting RC frame buildings	2355-2366
Chaudhari, Vasudeo / Somala, Surendra Nadh	Seismic performance of offshore wind turbine in the vicinity of seamount subduction zone	423-432
Chen, Haibin / Wu, Liwei / Jiang, HU / Liu, Yan	Seismic performance of prefabricated middle frame composed of special-shaped columns with built-in lattice concrete-filled circular steel pipes	1443-1457
Imran, Iswandi / Siringoringo, Dionysius M. / Michael, James	Seismic performance of reinforced concrete buildings with double concave friction pendulum base isolation system: case study of design by Indonesian code	462-478
Zhu, Lihua / Ning, Qiujun / Zhao, Cheng / Ji, Cuiru / Pan, Xinbo / Han, Wei	Seismic performance of self-centering circular concrete-filled steel tubular column to steel beam connection with web friction device	1843-1857
Ren, Xin / Qiang, Zhang / Dazhu, Hu / Dengshan, Bi	Seismic performance study on critically damaged masonry piers retrofitted using shear-compressive metal dampers	3906-3914
Cayci, Bayram Tanik / Akpinar, Mustafa	Seismic pounding effects on typical building structures considering soil-structure interaction	1858-1871
Shafei, Erfan / Tariverdilo, Saeed	Seismic pullout behavior of cast-in-place anchor bolts embedded in plain concrete: Damage plasticity based analysis	479-486
Qian, Huiya / Guo, Junchao / Yang, Xiuming / Lin, Feng	Seismic rehabilitation of gravity load-designed interior RC beam-column joints using ECC-infilled steel cylinder shell	1212-1228
Elias, Said / Rupakhety, Rajesh / De Domenico, Dario / Ólafsson, Símon	Seismic response control of bridges with nonlinear tuned vibration absorbers	262-274
Wang, Xinyu / Xie, Linlin / Zeng, Demin / Yang, Cantian / Liu, Qianmin	Seismic retrofitting of reinforced concrete frame-shear wall buildings using seismic isolation for resilient performance	4745-4757
Bothara, Jitendra / Desai, Rajendra / Ingham, Jason / Dizhur, Dmytro	Seismic simulation tools and methods appropriate for developing countries	314-326
Mansour, Ayman Mohammad / Kassem, Moustafa Moufid / Nazri, Fadzli Mohamed	Seismic vulnerability assessment of elevated water tanks with variable staging pattern incorporating the fluid-structure interaction	61-77
Ahmadi, Ehsan / Kashani, Mohammad M.	Seismic vulnerability assessment of precast post-tensioned segmental bridge piers subject to far-fault ground motions	2566-2579
Dong, Hongying / Qin, Jia / Cao, Wanlin / Yang, Lin / Yin, Fei / Wang, Ruwei	Shaking table tests on concrete-filled steel tubular-framed building assembled with microcrystalline foam boards	2098-2114
Tran, Cao Thanh Ngoc / Nguyen, Xuan Huy / Le, Anh Tuan / Nguyen, Huy Cuong / Le, Dang Dung	Shear tests of GFRP-reinforced concrete beams strengthened in shear by textile reinforced concrete	4339-4349
Saoula, Abdelkader / Selim, Mahmoud M. / Meftah, Sid Ahmed / Benyamina, Abdelrahmane Bekaddour / Tounsi, Abdelouahed	Simplified analytical method for lateral torsional buckling assessment of RHS beams with web openings	2848-2860
Liu, Shan-wei / Zhang, Qian-qing / Cui, Chun-yu / Feng, Ruo-feng / Cui, Wei	A simplified approach for the response of pile groups composed of dissimilar piles	4548-4559
Rossi, P. P.	Simplified evaluation of the N-M-V ultimate domain of R.C. rectangular members with shear reinforcement	4758-4773
Xu, Wenliu / Wang, Licheng	Simplified model for static stress analysis of straight eccentric lug subjected to cosine distribution pressure	2077-2086
Bui, Linh Van Hong / Jongvivatsakul, Pitcha / Limpaninlachat, Pornpen / Stitmannaithum, Boonchai / Nguyen, Thanh-Truong / Nguyen, Trong-Phuoc	Simulation of shear behavior of corroded reinforced concrete beams flexurally repaired with steel fiber-reinforced concrete	1545-1559
Liu, Wei / Li, Yuchun	Stability analysis for parametric resonances of frame structures using dynamic axis-force transfer coefficient	3611-3621
Mubarack, C. K. Ali / Upadhyay, Akhil	Stability of continuous welded rail on steel bridge subjected to thermal loading	4524-4531
Hasan, Mohammad Jobaer / Ashraf, Mahmud / Al-deen, Safat / Shill, Sukanta Kumer / Uy, Brian	Stainless steel top-seat angle beam-to-column connection: Full-scale test and analytical modelling	4322-4338
Huang, Yang / Chen, Shiming / Gu, Ping	Static and fatigue behavior of shear stud connection embedded in UHPC	2777-2788
Zhou, Hongyuan / Zhou, Houzhan / Wang, Xiaojuan / Cao, Wanlin / Song, Tianyi / Qiao, Qiyun	Static size effect of recycled coarse aggregate concrete: Experimental study, meso-scale simulation, and theoretical analysis	2996-3012
Wang, Xiuling / Fan, Feifei / Lai, Jinxing / Xie, Yongli	Steel fiber reinforced concrete: A review of its material properties and usage in tunnel lining	1080-1098
Hajimirsadeghi, Mohammad Reza / Fanaie, Nader	Steel plate shear walls with large disconnected lengths of web plate to vertical boundary element	4596-4615
Karimizadeh, Hamid / Arabzadeh, Abolfazl	A STM-based analytical model for predicting load capacity of deep RC beams with openings	1185-1200
Halicka, Anna / Ślósarz, Szymon	Strengthening of timber beams with pretensioned CFRP strips	2912-2921
Wang, Jinxiao / Cheng, Bin / Yan, Xingfei / Zhang, Kailong / Zhou, Zhenxing	Structural analysis and optimization of an advanced all-GFRP highway bridge	3155-3171
Karpov, V. V. / Semenov, A. A.	Structural anisotropy method for shells with orthogonal stiffeners	3206-3221
Chandrathilaka, E. R. K. / Kristombu Baduge, Shanaka / Mendis, Priyan / Thilakarathna, P. S. M.	Structural applications of synthetic fibre reinforced cementitious composites: A review on material properties, fire behaviour, durability and structural performance	550-574
Apandi, Nazirah / Ma, Chau-Khun / Awang, Abdullah Zawawi / Omar, Wahid	Structural behaviour of pre-damaged RC columns immediate repaired employing pre-tensioned steel straps	964-978
Ge, Xinguang / Li, Chuangdi / Azim, Iftikhar / Gong, Jinghai / Li, Yuxiang	Structural dynamic responses of linear structures subjected to Kanai-Tajimi excitation	3958-3967
Chen, Chun-Chung / Siao, Sheng-Yuan / Jiang, Chi-Rung / Lee, Bo-Han / Yeh, Fang-Yao	Structural effects of unequal leg lengths in lattice steel towers with the D-type bracing system	2801-2817
Archana, A. R. / Abdul Akbar, M.	Structural irregularity quantification in buildings using vital signs	2592-2599
Wu, Yangwei / Du, Xinxi / Yuan, Huanxin	Structural performance of cold-formed steel box girders with C-section flanges and sinusoidal corrugated webs	4851-4866
Zhang, Bingjie / Wang, Yuzhuo / Li, Guoqiang / Qu, Shuang / Fu, Chuanguo / Xu, Tiangui	Structural performance of steel reinforced concrete T-shaped columns exposure to high temperature	716-728
Takagi, Jiro / Ohsaki, Makoto / Cao, Yongsheng	Structural properties of superior design solutions of steel buildings associated with BRBs	3851-3865
El–sayed, H. M. / Zohny, H. N. / Riad, H. S. / Fayed, M. N.	Structural response of monoblock railway concrete sleepers and fastening systems subject to coupling vertical and lateral loads: A numerical study	995-1007
He, Zhen-jun / Chen, Ying / Ma, Yan-ni / Zhang, Xiao-jie / Jin, Ying-xi / Song, Jia	The study on bond-slip constitutive model of steel-fiber high-strength recycled concrete	2134-2150
Xu, Ping / Xiao, Xianliang / Yao, Shuguang / Kong, Lingxiang	Study on effect of offset defect on mechanical property of honeycomb structures	275-285
Wang, Jiachang / Shu, Ganping / Xu, Xiu / Dong, Shutong / Zheng, Baofeng	Study on mechanical properties of high strength sorbite stainless steel S600E under monotonic and cyclic loadings	2665-2678
Xu, Zhen-Hua / Bai, Guo-liang / Zhao, Jin-Quan / Liu, Biao	Study on seismic performance of SRC leaning beam-column exterior joints in the main workshop of CAP1400 nuclear power plant	2721-2734
Zhou, Xiwu / Zhou, Ming / Luo, Dongmei / Wu, Benying / Liu, Lingfei	Study on the nonlinear response and shear behavior of RC columns under lateral impact	3834-3850
Wang, Qinhua / Liu, Feihong / Yu, Ying	Study on wind-induced response of a large-span roof by using finite particle method	3567-3582
Jia, Bin / Zhang, Chuntao / Lian, Jie / Huang, Hui / Liu, Xiang	Tensile behavior of FRP bar butt joints built with new FRP sleeves	1124-1134
Fan, Xiongtao / Zhao, Zhongwei / Xu, Hao / Liu, Haiqing / Zhang, Ni / Wu, Xiufeng	The tensioning process of ellipsoidal suspen-dome structures with considering the friction of cable-strut joints	3757-3775
Lin, Quan / Xue, Xiaolei / Guo, Zhan / Zhao, Yang / Chen, Yu	Test on shear behavior of less-tightened high-strength bolted connections	3622-3639
Anbarasu, M. / Pandey, Anjali Kumari Pravin Kumar / Patton, M. Longshithung / Carvalho, Hermes	Testing and modelling of hot-rolled steel castellated hollow tubular beams	4025-4040
Somala, Surendra Nadh / Karthikeyan, Karthika / Mangalathu, Sujith	Time period estimation of masonry infilled RC frames using machine learning techniques	1560-1566
Wang, Siqi / Zhang, Liye / Su, Han / Du, Jinsheng	Time-dependent robustness-based condition assessment of RC bridges subjected to corrosion	4500-4510
Zhang, Chunwei / Abedini, Masoud	Time-history blast response and failure mechanism of RC columns using Lagrangian formulation	3087-3098
Meng, Debiao / Lv, Zhiyuan / Yang, Shiyuan / Wang, Hongtao / Xie, Tianwen / Wang, Zihao	A time-varying mechanical structure reliability analysis method based on performance degradation	3247-3256
Jia, Zhi-Lu / Shi, Yan-Li / Xian, Wei / Wang, Wen-Da	Torsional behaviour of concrete-filled circular steel tubular members under coupled compression and torsion	931-946
Fotopoulou, Stavroula D. / Pitilakis, Kyriazis D.	Towards the vulnerability assessment of low-code RC frame buildings at precarious slopes subjected to rainfall induced landslide hazard	239-261
Cheng, Hu / Wang, Dong-Sheng / Li, Hong-Nan / Yan, Xin-Chi / Yu, She	Transfer time of the MDP and its effect on the time-dependent lateral deformation capacity of coastal bridge piers	3196-3205
Liu, Pengfei / Chen, Jianyun / Fan, Shuli / Xu, Qiang	Uncertainty quantification of the effect of concrete heterogeneity on nonlinear seismic response of gravity dams including record-to-record variability	1785-1797
Lv, Qingfang / Lu, Yujie / Liu, Ye	Vibration serviceability of suspended floor: Full-scale experimental study and assessment	1651-1664
Li, Si-qi / Liu, Hong-Bo / Chen, Yong-Sheng	Vulnerability models of brick and wood structures considering empirical seismic damage observations	2544-2565
Jahangir, Hashem / Hasani, Hamed / Esfahani, Mohammad Reza	Wavelet-based damage localization and severity estimation of experimental RC beams subjected to gradual static bending tests	3055-3069
Sun, Yun / Liu, Yuqing / Wang, Congzhe / Zuo, Yize / Xin, Haohui	Web buckling mechanism of pultruded GFRP bridge deck profiles subjected to concentrated load	3789-3805
Jia, Junbo	Wind induced dynamic response and fatigue assessment – Nonlinear time domain versus linear stochastic analysis	4406-4422

Über diese
Datenseite
IssueID
59373
Veröffentlicht am:
26.08.2021
Geändert am:
09.05.2022

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Structures - Dezember 2021

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Structures - Dezember 2021

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.