Structures - April 2021

Published:	April 2021

Articles in this Issue

Author(s)	Title	Page(s)
Mohebbi, Mohtasham / Dadkhah, Hamed	An adaptive control algorithm for smart base isolation systems based on seismic early warning system	638-646
Yang, Chuanchang / Fan, Jian	Artificial neural network-based hysteresis model for circular steel tubes	418-439
Badri, Ramin K. / Moghadam, A. S.	Assessing the importance of deterioration properties for the design decision-makings of low-rise asymmetric reinforced concrete buildings	602-610
Huang, Cheng-Jun / Wu, Xiao-Ang / Chen, Si-Jia / Song, Xiao-Bing	Behaviors of steel-plate and concrete in steel-concrete-steel panels subjected to biaxial tension-compression	217-228
Guo, Zhi / Xu, Xiuchen / Du, Yansheng / Chen, Zhihua	Behaviors of welded hollow spherical joints strengthened by unidirectional annular ribs	11-24
Cyril Thomas, A. / Baskar, K.	Behaviour of thin-walled castellated beams strengthened using CFRP	338-351
Dissanayake, D. M. M. P. / Poologanathan, K. / Gunalan, S. / Tsavdaridis, K. D. / Wanniarachchi, K. S. / Nagaratnam, B.	Bending-shear interaction of cold-formed stainless steel lipped channel sections	1042-1055
Huang, Yijie / Zhang, Yijian / Li, Xiaowei / Ying, Jingwei	Bond of epoxy-coated steel bars to seawater sea sand recycled concrete	866-876
Pimentel, Ricardo / Ribeiro, Diogo / Matos, Luís / Mosleh, Araliya / Calçada, Rui	Bridge Weigh-in-Motion system for the identification of train loads using fiber-optic technology	1056-1070
Kyprianou, Constantinos / Kyvelou, Pinelopi / Gardner, Leroy / Nethercot, David A.	Characterisation of material and connection behaviour in sheathed cold-formed steel wall systems – Part 1: Experimentation and data compilation	1161-1183
Kyprianou, Constantinos / Kyvelou, Pinelopi / Gardner, Leroy / Nethercot, David A.	Characterisation of material and connection behaviour in sheathed cold-formed steel wall systems – Part 2: Analytical modelling	1184-1199
Qu, Zhen / Hu, Dianyin / Chen, Zhiying	Contact nonlinear analysis for the under-platform dampers of blade based on a frictional energy dissipation model	146-155
He, Zhi-Qi / Li, Yonghui / Xu, Tian / Liu, Zhao / Ma, Zhongguo John	Crack-based serviceability assessment of post-tensioned segmental concrete box-girder bridges	1097-1108
Nakipoglu, Abdulhamit / Unal, Alptug / Kamanli, Mehmet	Damage analysis of Golyazi Apartments building failed under axial loads: A case study in Konya, Turkey	409-417
Prem, Prabhat Ranjan / Verma, Mohit / Ambily, P. S.	Damage characterization of reinforced concrete beams under different failure modes using acoustic emission	174-187
Katunin, Andrzej / Araújo dos Santos, José Viriato / Lopes, Hernâni	Damage identification by wavelet analysis of modal rotation differences	1-10
Cao, Ting / D'Acunto, Pierluigi / Castellón, Juan José / Tellini, TelliniAlessandro / Schwartz, Joseph / Zhang, Hong	Design of prestressed gridshells as smooth poly-hypar surface structures	973-984
Mousavi, Seyed Amin / Zahrai, Seyed Mehdi / Akhlagh Pasand, Ali	Drift-based seismic design procedure for Buckling Restrained Braced Frames	62-74
Huang, Jinguang / Zou, Chaoying / Sun, Duo / Yang, Bin / Yan, Jiachuan	Effect of recycled fine aggregates on alkali-activated slag concrete properties	89-99
Kadhim, Majid M. A. / Jawdhari, Akram / Peiris, Abheetha	Evaluation of lap-splices in NSM FRP rods for retrofitting RC members	877-894
Bai, Yu / Zhang, Jin / Shen, Hao	Experimental and numerical analysis of residual load-carrying capacity of cross-laminated timber walls after fire	50-61
Bohara, Rajendra Prasad / Tanapornraweekit, Ganchai / Tangtermsirikul, Somnuk	Experimental and numerical investigation on seismic performance of a composite wide beam-column interior joint	560-573
Li, Yang / Xing, Wanli / Kong, Qingzhao / Ren, Peiqi / Ding, Jingzhen / Li, Yantao	Experimental and theoretical study on mechanical properties of steel–concrete double-sided composite cantilever beams	100-114
Xu, Qiuyu / Wang, Jingfeng / Ding, Zhaodong / Xia, Jingcheng / Rasa, Abdul Rahim / Shen, Qihan	Experimental investigation and analysis on anchorage performance of 635 MPa hot-rolled ribbed high strength rebars	574-584
Yin, Fei / Liu, Meiyu / Bai, Yin / Zhai, Jianlei / Zhang, Youzhen / Yang, Lu	Experimental study on failure mechanism of point-supported tempered glass panels under fire conditions	495-502
Wu, Kai / Zheng, Huiming / Zhao, Jixiang / Li, Hui / Lin, Junfu	Experimental study on interfacial bond behavior and analysis of bond stress of steel and steel fiber reinforced concrete composite structure	156-165
Huang, Bingsheng / Lu, Meng / Cao, Yuefei / Yang, Fang	Experimental study on residual performance of welded hollow spherical joints subjected to axial compression after a fire	996-1005
Zhang, Pu / Hu, Yi / Pang, Yuyang / Zhang, Shuangquan / Zia, Asad / Gao, Danying / Zhu, Hong / Sheikh, Shamim Ahmed	Experimental study on the bond behavior of GFRP plate-high-strength concrete composite interfaces under the coupled effects of sustained load and seawater immersion	316-328
Pashaie, Mohammad Reza / Mohammadi, Majid	An extended multiple-strut model to estimate infill effects on multi-storey steel frames with different connection rigidities	710-734
Chen, Fubin / Zhan, Zhuoyu / Zhou, Jinfang / Shu, Zhenru / Li, Qiusheng	A fast partition method for wind pressure coefficient of large-span roof based on modified GK clustering	518-530
Correia, José A. F. O. / da Silva, António L. L. / Xin, Haohui / Lesiuk, Grzegorz / Zhu, Shun-Peng / de Jesus, Abilio M. P. / Fernandes, António A.	Fatigue performance prediction of S235 base steel plates in the riveted connections	745-755
Ali, Hafiz Tauqeer / Akrami, Roya / Fotouhi, Sakineh / Bodaghi, Mahdi / Saeedifar, Milad / Yusuf, Mohammad / Fotouhi, Mohamad	Fiber reinforced polymer composites in bridge industry	774-785
Li, Chang-Hui / Yan, Jia-Bao / Guan, Hui-Ning	Finite element analysis on enhanced C-channel connectors in SCS sandwich composite structures	818-837
Gunawardena, Yasoja / Aslani, Farhad	Finite element modelling of concrete-filled spiral-welded mild-steel tube short and long columns	1020-1041
Navaratnam, Satheeskumar / Thamboo, Julian / Poologanathan, Keerthan / Roy, Krishanu / Gatheeshgar, Perampalam	Finite element modelling of timber infilled steel tubular short columns under axial compression	910-924
Barham, Wasim S. / Idris, Aws A.	Flexibility-based large increment method for nonlinear analysis of Timoshenko beam structures controlled by a bilinear material model	678-691
Anbarasu, M. / Dar, M. Adil / Ghowsi, Ahmad Fayeq / Dar, A. R.	Flexural behaviour of cover plated CFS built-up beams composed of lipped channels: Comparison of test and design strengths	294-304
Lu, De-ren / Wang, Wen-jun / Ding, Fa-xing / Liu, Xue-mei / Fang, Chang-jing	The impact of stirrups on the composite action of concrete-filled steel tubular stub columns under axial loading	786-802
Tong, Teng / Wang, Yangchun / Yuan, Siqi / Brigham, John C. / Liu, Zhao	Incorporation of localizing gradient-enhanced damage model into layered membrane elements for reinforced concrete structures subject to in-plane loading	455-476
Mahmoud, Sayed / Alqarni, Ali / Saliba, Joseph / Ibrahim, Amal H. / genidy, Magdy / Diab, Hesham	Influence of floor system on seismic behavior of RC buildings to forward directivity and fling-step in the near-fault region	803-817
Hassan, A. M. T. / Mahmud, G. H. / Mohammed, A. S. / Jones, S. W.	The influence of normal curing temperature on the compressive strength development and flexural tensile behaviour of UHPFRC with vipulanandan model quantification	949-959
Dar, M. Adil / Sahoo, Dipti Ranjan / Jain, Arvind K.	Interaction between chord compactness and lacing slenderness in CFS built-up columns	985-995
Yurdakul, Muhammet / Yılmaz, Fatih / Artar, Musa / Can, Ömer / Öner, Erdal / Daloğlu, Ayşe T.	Investigation of time-history response of a historical masonry minaret under seismic loads	265-276
Ma, Yue / Bai, Rui / Yang, Hong-xia / Guo, Sheng-dong	Investigations of the hot granular material effect on steel silo	229-238
Gönen, Semih / Soyoz, Serdar	Investigations on the elasticity modulus of stone masonry	378-389
Xue, Jianyang / Ren, Guoqi / Qi, Liangjie / Zhang, Xin	Lateral behavior of glued-laminated timber frame infilled with light-wooden-frame wall hybrid system: Experimental and numerical analysis	352-367
Sarcheshmehpour, M. / Estekanchi, H. E.	Life cycle cost optimization of earthquake-resistant steel framed tube tall buildings	585-601
Uenaka, Kojiro / Mizukoshi, Mutsumi	Lightweight concrete filled steel tubular beam under bending-shear	659-666
Graciano, Carlos / Kurtoğlu, Ahmet Emin / Casanova, Euro	Machine learning approach for predicting the patch load resistance of slender austenitic stainless steel girders	198-205
Fu, Zhijun / Gao, Rui / Li, Yiming	Measuring seismic resilience of building portfolios based on innovative damage ratio assessment model	1109-1126
Zou, Yang / Zheng, Kaidi / Zhou, Jianting / Zhang, Zhongya / Li, Xiujun	Mechanical behavior of perfobond connector group in steel–concrete joint of hybrid bridge	925-936
Ben Seghier, Mohamed El Amine / Gao, Xiao-Zhi / Jafari-Asl, Jafar / Thai, Duc-Kien / Ohadi, Sima / Trung, Nguyen-Thoi	Modeling the nonlinear behavior of ACC for SCFST columns using experimental-data and a novel evolutionary-algorithm	692-709
Kechidi, Smail / Colaço, Aires / Alves Costa, Pedro / Castro, José Miguel / Marques, Mário	Modelling of soil-structure interaction in OpenSees: A practical approach for performance-based seismic design	75-88
Simonetti, Hélio Luiz / de Assis das Neves, Francisco / Almeida, Valério S.	Multiobjective topology optimization with stress and strain energy criteria using the SESO method and a Multicriteria Tournament Decision	188-197
Ananthi, G. Beulah Gnana / Roy, Krishanu / Ahmed, Abdeliazim Mustafa Mohamed / Lim, James B. P.	Non-linear behaviour and design of web stiffened battened built-up stainless steel channel sections under axial compression	477-494
Roy, Krishanu / Lau, Hieng Ho / Ahmed, Abdeliazim Mustafa Mohamed / Lim, James B. P.	Nonlinear behavior of cold-formed stainless steel built-up box sections under axial compression	390-408
Lanlan, Zhang / Yingying, Zhang / wei, song / Junhao, Xu / Jigang, Xue	A nonlinear damage constitutive model of PVC coated fabrics	368-377
Shirzadeh Germi, Meysam / Kalehsar, Houshyar Eimani	Numerical investigation of interference effects on the critical wind velocity of tall buildings	239-252
Ahmed, Mizan / Ci, Junchang / Yan, Xi-Feng / Lin, Siqi / Chen, Shicai	Numerical modeling of axially loaded circular concrete-filled double-skin steel tubular short columns incorporating a new concrete confinement model	611-627
Das, Sandeep / Dutta, Subhrajit / Adak, Dibyendu / Majumdar, Shubhankar	On the crack characterization of reinforced concrete structures: Experimental and data-driven numerical study	134-145
Gatheeshgar, Perampalam / Poologanathan, Keerthan / Thamboo, Julian / Roy, Krishanu / Rossi, Barbara / Molkens, Tom / Perera, Dilini / Navaratnam, Satheeskumar	On the fire behaviour of modular floors designed with optimised cold-formed steel joists	1071-1085
Somodi, B. / Kövesdi, B. / Hornyák, T.	Partial factor for local buckling of welded box sections	440-454
da Silva, Luís Simões / Silva, Luís Carlos / Tankova, Trayana / Craveiro, Hélder David / Simões, Rui / Costa, Ricardo / D'Aniello, Mario / Landolfo, Raffaele	Performance of modular hybrid cold-formed/tubular structural system	1006-1019
Jing, Deng-Hu / Krevaikas, Theofanis / Zhang, Han	Pre-stressed steel strips for the strengthening of axially loaded masonry walls	25-40
Cui, Shuangshuang / Chen, Yan / Lu, Dagang	Probability assessment of structural response modification factor of RC frames by the demand-capacity-factor method	628-637
Rahgozar, Navid / Rahgozar, Nima	Proposal of lateral forces for capacity design of controlled rocking steel cores considering higher mode effects	1086-1096
Kapoor, Divyansh R. / Peterman, Kara D.	Quantification and prediction of the thermal performance of cold-formed steel wall assemblies	305-315
Ghahremani Baghmisheh, Amir / Estekanchi, Homayoon E.	Quantifying seismic response uncertainty of electrical substation structures using endurance time method	838-849
Liu, Chengqing / Fang, Dengjia / Zhao, Lijie	Reflection on earthquake damage of buildings in 2015 Nepal earthquake and seismic measures for post-earthquake reconstruction	647-658
Zhou, Tianhua / Li, Yanchun / Ren, Lujie / Sang, Liurui / Zhang, Lei	Research on the elastic buckling of composite webs in cold-formed steel back-to-back built-up columns – Part I: Experimental and numerical investigation	115-133
Mosallam, Ayman S. / Xin, Haohui / Salama, Mohamed A. / Altunişik, Ahmet Can / Adanur, Süleyman / Elmikawi, Mohamed	Residual mechanical properties of triaxial CFRP laminates after thermal cycling and ultraviolet radiation exposure of composite bridge members	166-173
Khedmatgozar Dolati, Seyed Saman / Mehrabi, Armin	Review of available systems and materials for splicing prestressed-precast concrete piles	850-865
Wang, Feng / Shi, Qing-Xuan / Wang, Peng	Seismic behaviour of reinforced concrete frame structures with all steel assembled Q195 low yield buckling restrained braces	756-773
Rizwan, Muhammad / Ahmad, Naveed / Khan, Akhtar Naeem	Seismic performance assessment of reinforced concrete moment resisting frame with low strength concrete	1140-1160
Khan, Izzat / Shahzada, Khan / Bibi, Tayyaba / Ahmed, Asfandyar / Ullah, Hanif	Seismic performance evaluation of crumb rubber concrete frame structure using shake table test	41-49
Dong, Baiping / Chen, Yueshi / Wang, Wei	Self-centering mechanism and seismic response of steel tension-only concentrically braced beam-through frames	960-972
Kim, Hyung-Joon / Shin, Dong-Hyeon	Shake table test program of cold-formed steel in-plane partition walls	503-517
Yang, Yuanzhang / Shu, Jiangpeng / Zhao, Weijiang / Orr, John	Shear design method for non-prismatic concrete beams reinforced using W-FRP	667-677
Jawad, Farqad K. J. / Ozturk, Celal / Dansheng, Wang / Mahmood, Mohammed / AL-Azzawi, Osama / Al-Jemely, Anas	Sizing and layout optimization of truss structures with artificial bee colony algorithm	546-559
Chanthamanivong, Khongkham / Ario, Ichiro / Chikahiro, Yuki	Smart design of coupling scissors-type bridge	206-216
Tazarv, Mostafa / Shrestha, Grishma / Saiidi, M. Saiid	State-of-the-art review and design of grouted duct connections for precast bridge columns	895-909
Du, Y. X. / Shao, X. / Chu, S. H. / Zhou, F. / Su, R. K. L.	Strengthening of preloaded RC beams using prestressed carbon textile reinforced mortar plates	735-744
Caçoilo, A. / Mourão, R. / Teixeira-Dias, F. / Lecompte, D. / Rush, D.	Structural response of corrugated plates under blast loading: The influence of the pressure-time history	531-545
Civera, Marco / Calamai, Giulia / Zanotti Fragonara, Luca	System identification via Fast Relaxed Vector Fitting for the Structural Health Monitoring of masonry bridges	277-293
Dai, Lizhao / Chen, Hong / Wang, Lei / Ma, Yafei / Zhang, Jianren	Transfer length prediction in pre-tensioned concrete beams under corrosive cracking	938-948
Zhen-jun, He / Yan-ni, Ma / Zhen-wei, Wang / Xiao-jie, Zhang / Xue-sheng, Zhang / Meng-jia, Ding / Chuan, Fu	Triaxial strength and deformation characteristics and its constitutive model of high-strength concrete before and after high temperatures	1127-1138
Akbarzadeh, Neda / Tariverdilo, Saeed / Emamyari, Alireza	Vibration of submerged floating tunnels under asynchronous support excitation	329-337
Baykasoglu, Adil / Baykasoğlu, Cengiz	Weighted superposition attraction-repulsion (WSAR) algorithm for truss optimization with multiple frequency constraints	253-264

About this
data sheet
IssueID
55712
Published on:
22/01/2021
Last updated on:
09/05/2022

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Structures - April 2021

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Structures - April 2021

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.