Structures - April 2021

Erschienen:	April 2021

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Mohebbi, Mohtasham / Dadkhah, Hamed	An adaptive control algorithm for smart base isolation systems based on seismic early warning system	638-646
Yang, Chuanchang / Fan, Jian	Artificial neural network-based hysteresis model for circular steel tubes	418-439
Badri, Ramin K. / Moghadam, A. S.	Assessing the importance of deterioration properties for the design decision-makings of low-rise asymmetric reinforced concrete buildings	602-610
Huang, Cheng-Jun / Wu, Xiao-Ang / Chen, Si-Jia / Song, Xiao-Bing	Behaviors of steel-plate and concrete in steel-concrete-steel panels subjected to biaxial tension-compression	217-228
Guo, Zhi / Xu, Xiuchen / Du, Yansheng / Chen, Zhihua	Behaviors of welded hollow spherical joints strengthened by unidirectional annular ribs	11-24
Cyril Thomas, A. / Baskar, K.	Behaviour of thin-walled castellated beams strengthened using CFRP	338-351
Dissanayake, D. M. M. P. / Poologanathan, K. / Gunalan, S. / Tsavdaridis, K. D. / Wanniarachchi, K. S. / Nagaratnam, B.	Bending-shear interaction of cold-formed stainless steel lipped channel sections	1042-1055
Huang, Yijie / Zhang, Yijian / Li, Xiaowei / Ying, Jingwei	Bond of epoxy-coated steel bars to seawater sea sand recycled concrete	866-876
Pimentel, Ricardo / Ribeiro, Diogo / Matos, Luís / Mosleh, Araliya / Calçada, Rui	Bridge Weigh-in-Motion system for the identification of train loads using fiber-optic technology	1056-1070
Kyprianou, Constantinos / Kyvelou, Pinelopi / Gardner, Leroy / Nethercot, David A.	Characterisation of material and connection behaviour in sheathed cold-formed steel wall systems – Part 1: Experimentation and data compilation	1161-1183
Kyprianou, Constantinos / Kyvelou, Pinelopi / Gardner, Leroy / Nethercot, David A.	Characterisation of material and connection behaviour in sheathed cold-formed steel wall systems – Part 2: Analytical modelling	1184-1199
Qu, Zhen / Hu, Dianyin / Chen, Zhiying	Contact nonlinear analysis for the under-platform dampers of blade based on a frictional energy dissipation model	146-155
He, Zhi-Qi / Li, Yonghui / Xu, Tian / Liu, Zhao / Ma, Zhongguo John	Crack-based serviceability assessment of post-tensioned segmental concrete box-girder bridges	1097-1108
Nakipoglu, Abdulhamit / Unal, Alptug / Kamanli, Mehmet	Damage analysis of Golyazi Apartments building failed under axial loads: A case study in Konya, Turkey	409-417
Prem, Prabhat Ranjan / Verma, Mohit / Ambily, P. S.	Damage characterization of reinforced concrete beams under different failure modes using acoustic emission	174-187
Katunin, Andrzej / Araújo dos Santos, José Viriato / Lopes, Hernâni	Damage identification by wavelet analysis of modal rotation differences	1-10
Cao, Ting / D'Acunto, Pierluigi / Castellón, Juan José / Tellini, TelliniAlessandro / Schwartz, Joseph / Zhang, Hong	Design of prestressed gridshells as smooth poly-hypar surface structures	973-984
Mousavi, Seyed Amin / Zahrai, Seyed Mehdi / Akhlagh Pasand, Ali	Drift-based seismic design procedure for Buckling Restrained Braced Frames	62-74
Huang, Jinguang / Zou, Chaoying / Sun, Duo / Yang, Bin / Yan, Jiachuan	Effect of recycled fine aggregates on alkali-activated slag concrete properties	89-99
Kadhim, Majid M. A. / Jawdhari, Akram / Peiris, Abheetha	Evaluation of lap-splices in NSM FRP rods for retrofitting RC members	877-894
Bai, Yu / Zhang, Jin / Shen, Hao	Experimental and numerical analysis of residual load-carrying capacity of cross-laminated timber walls after fire	50-61
Bohara, Rajendra Prasad / Tanapornraweekit, Ganchai / Tangtermsirikul, Somnuk	Experimental and numerical investigation on seismic performance of a composite wide beam-column interior joint	560-573
Li, Yang / Xing, Wanli / Kong, Qingzhao / Ren, Peiqi / Ding, Jingzhen / Li, Yantao	Experimental and theoretical study on mechanical properties of steel–concrete double-sided composite cantilever beams	100-114
Xu, Qiuyu / Wang, Jingfeng / Ding, Zhaodong / Xia, Jingcheng / Rasa, Abdul Rahim / Shen, Qihan	Experimental investigation and analysis on anchorage performance of 635 MPa hot-rolled ribbed high strength rebars	574-584
Yin, Fei / Liu, Meiyu / Bai, Yin / Zhai, Jianlei / Zhang, Youzhen / Yang, Lu	Experimental study on failure mechanism of point-supported tempered glass panels under fire conditions	495-502
Wu, Kai / Zheng, Huiming / Zhao, Jixiang / Li, Hui / Lin, Junfu	Experimental study on interfacial bond behavior and analysis of bond stress of steel and steel fiber reinforced concrete composite structure	156-165
Huang, Bingsheng / Lu, Meng / Cao, Yuefei / Yang, Fang	Experimental study on residual performance of welded hollow spherical joints subjected to axial compression after a fire	996-1005
Zhang, Pu / Hu, Yi / Pang, Yuyang / Zhang, Shuangquan / Zia, Asad / Gao, Danying / Zhu, Hong / Sheikh, Shamim Ahmed	Experimental study on the bond behavior of GFRP plate-high-strength concrete composite interfaces under the coupled effects of sustained load and seawater immersion	316-328
Pashaie, Mohammad Reza / Mohammadi, Majid	An extended multiple-strut model to estimate infill effects on multi-storey steel frames with different connection rigidities	710-734
Chen, Fubin / Zhan, Zhuoyu / Zhou, Jinfang / Shu, Zhenru / Li, Qiusheng	A fast partition method for wind pressure coefficient of large-span roof based on modified GK clustering	518-530
Correia, José A. F. O. / da Silva, António L. L. / Xin, Haohui / Lesiuk, Grzegorz / Zhu, Shun-Peng / de Jesus, Abilio M. P. / Fernandes, António A.	Fatigue performance prediction of S235 base steel plates in the riveted connections	745-755
Ali, Hafiz Tauqeer / Akrami, Roya / Fotouhi, Sakineh / Bodaghi, Mahdi / Saeedifar, Milad / Yusuf, Mohammad / Fotouhi, Mohamad	Fiber reinforced polymer composites in bridge industry	774-785
Li, Chang-Hui / Yan, Jia-Bao / Guan, Hui-Ning	Finite element analysis on enhanced C-channel connectors in SCS sandwich composite structures	818-837
Gunawardena, Yasoja / Aslani, Farhad	Finite element modelling of concrete-filled spiral-welded mild-steel tube short and long columns	1020-1041
Navaratnam, Satheeskumar / Thamboo, Julian / Poologanathan, Keerthan / Roy, Krishanu / Gatheeshgar, Perampalam	Finite element modelling of timber infilled steel tubular short columns under axial compression	910-924
Barham, Wasim S. / Idris, Aws A.	Flexibility-based large increment method for nonlinear analysis of Timoshenko beam structures controlled by a bilinear material model	678-691
Anbarasu, M. / Dar, M. Adil / Ghowsi, Ahmad Fayeq / Dar, A. R.	Flexural behaviour of cover plated CFS built-up beams composed of lipped channels: Comparison of test and design strengths	294-304
Lu, De-ren / Wang, Wen-jun / Ding, Fa-xing / Liu, Xue-mei / Fang, Chang-jing	The impact of stirrups on the composite action of concrete-filled steel tubular stub columns under axial loading	786-802
Tong, Teng / Wang, Yangchun / Yuan, Siqi / Brigham, John C. / Liu, Zhao	Incorporation of localizing gradient-enhanced damage model into layered membrane elements for reinforced concrete structures subject to in-plane loading	455-476
Mahmoud, Sayed / Alqarni, Ali / Saliba, Joseph / Ibrahim, Amal H. / genidy, Magdy / Diab, Hesham	Influence of floor system on seismic behavior of RC buildings to forward directivity and fling-step in the near-fault region	803-817
Hassan, A. M. T. / Mahmud, G. H. / Mohammed, A. S. / Jones, S. W.	The influence of normal curing temperature on the compressive strength development and flexural tensile behaviour of UHPFRC with vipulanandan model quantification	949-959
Dar, M. Adil / Sahoo, Dipti Ranjan / Jain, Arvind K.	Interaction between chord compactness and lacing slenderness in CFS built-up columns	985-995
Yurdakul, Muhammet / Yılmaz, Fatih / Artar, Musa / Can, Ömer / Öner, Erdal / Daloğlu, Ayşe T.	Investigation of time-history response of a historical masonry minaret under seismic loads	265-276
Ma, Yue / Bai, Rui / Yang, Hong-xia / Guo, Sheng-dong	Investigations of the hot granular material effect on steel silo	229-238
Gönen, Semih / Soyoz, Serdar	Investigations on the elasticity modulus of stone masonry	378-389
Xue, Jianyang / Ren, Guoqi / Qi, Liangjie / Zhang, Xin	Lateral behavior of glued-laminated timber frame infilled with light-wooden-frame wall hybrid system: Experimental and numerical analysis	352-367
Sarcheshmehpour, M. / Estekanchi, H. E.	Life cycle cost optimization of earthquake-resistant steel framed tube tall buildings	585-601
Uenaka, Kojiro / Mizukoshi, Mutsumi	Lightweight concrete filled steel tubular beam under bending-shear	659-666
Graciano, Carlos / Kurtoğlu, Ahmet Emin / Casanova, Euro	Machine learning approach for predicting the patch load resistance of slender austenitic stainless steel girders	198-205
Fu, Zhijun / Gao, Rui / Li, Yiming	Measuring seismic resilience of building portfolios based on innovative damage ratio assessment model	1109-1126
Zou, Yang / Zheng, Kaidi / Zhou, Jianting / Zhang, Zhongya / Li, Xiujun	Mechanical behavior of perfobond connector group in steel–concrete joint of hybrid bridge	925-936
Ben Seghier, Mohamed El Amine / Gao, Xiao-Zhi / Jafari-Asl, Jafar / Thai, Duc-Kien / Ohadi, Sima / Trung, Nguyen-Thoi	Modeling the nonlinear behavior of ACC for SCFST columns using experimental-data and a novel evolutionary-algorithm	692-709
Kechidi, Smail / Colaço, Aires / Alves Costa, Pedro / Castro, José Miguel / Marques, Mário	Modelling of soil-structure interaction in OpenSees: A practical approach for performance-based seismic design	75-88
Simonetti, Hélio Luiz / de Assis das Neves, Francisco / Almeida, Valério S.	Multiobjective topology optimization with stress and strain energy criteria using the SESO method and a Multicriteria Tournament Decision	188-197
Ananthi, G. Beulah Gnana / Roy, Krishanu / Ahmed, Abdeliazim Mustafa Mohamed / Lim, James B. P.	Non-linear behaviour and design of web stiffened battened built-up stainless steel channel sections under axial compression	477-494
Roy, Krishanu / Lau, Hieng Ho / Ahmed, Abdeliazim Mustafa Mohamed / Lim, James B. P.	Nonlinear behavior of cold-formed stainless steel built-up box sections under axial compression	390-408
Lanlan, Zhang / Yingying, Zhang / wei, song / Junhao, Xu / Jigang, Xue	A nonlinear damage constitutive model of PVC coated fabrics	368-377
Shirzadeh Germi, Meysam / Kalehsar, Houshyar Eimani	Numerical investigation of interference effects on the critical wind velocity of tall buildings	239-252
Ahmed, Mizan / Ci, Junchang / Yan, Xi-Feng / Lin, Siqi / Chen, Shicai	Numerical modeling of axially loaded circular concrete-filled double-skin steel tubular short columns incorporating a new concrete confinement model	611-627
Das, Sandeep / Dutta, Subhrajit / Adak, Dibyendu / Majumdar, Shubhankar	On the crack characterization of reinforced concrete structures: Experimental and data-driven numerical study	134-145
Gatheeshgar, Perampalam / Poologanathan, Keerthan / Thamboo, Julian / Roy, Krishanu / Rossi, Barbara / Molkens, Tom / Perera, Dilini / Navaratnam, Satheeskumar	On the fire behaviour of modular floors designed with optimised cold-formed steel joists	1071-1085
Somodi, B. / Kövesdi, B. / Hornyák, T.	Partial factor for local buckling of welded box sections	440-454
da Silva, Luís Simões / Silva, Luís Carlos / Tankova, Trayana / Craveiro, Hélder David / Simões, Rui / Costa, Ricardo / D'Aniello, Mario / Landolfo, Raffaele	Performance of modular hybrid cold-formed/tubular structural system	1006-1019
Jing, Deng-Hu / Krevaikas, Theofanis / Zhang, Han	Pre-stressed steel strips for the strengthening of axially loaded masonry walls	25-40
Cui, Shuangshuang / Chen, Yan / Lu, Dagang	Probability assessment of structural response modification factor of RC frames by the demand-capacity-factor method	628-637
Rahgozar, Navid / Rahgozar, Nima	Proposal of lateral forces for capacity design of controlled rocking steel cores considering higher mode effects	1086-1096
Kapoor, Divyansh R. / Peterman, Kara D.	Quantification and prediction of the thermal performance of cold-formed steel wall assemblies	305-315
Ghahremani Baghmisheh, Amir / Estekanchi, Homayoon E.	Quantifying seismic response uncertainty of electrical substation structures using endurance time method	838-849
Liu, Chengqing / Fang, Dengjia / Zhao, Lijie	Reflection on earthquake damage of buildings in 2015 Nepal earthquake and seismic measures for post-earthquake reconstruction	647-658
Zhou, Tianhua / Li, Yanchun / Ren, Lujie / Sang, Liurui / Zhang, Lei	Research on the elastic buckling of composite webs in cold-formed steel back-to-back built-up columns – Part I: Experimental and numerical investigation	115-133
Mosallam, Ayman S. / Xin, Haohui / Salama, Mohamed A. / Altunişik, Ahmet Can / Adanur, Süleyman / Elmikawi, Mohamed	Residual mechanical properties of triaxial CFRP laminates after thermal cycling and ultraviolet radiation exposure of composite bridge members	166-173
Khedmatgozar Dolati, Seyed Saman / Mehrabi, Armin	Review of available systems and materials for splicing prestressed-precast concrete piles	850-865
Wang, Feng / Shi, Qing-Xuan / Wang, Peng	Seismic behaviour of reinforced concrete frame structures with all steel assembled Q195 low yield buckling restrained braces	756-773
Rizwan, Muhammad / Ahmad, Naveed / Khan, Akhtar Naeem	Seismic performance assessment of reinforced concrete moment resisting frame with low strength concrete	1140-1160
Khan, Izzat / Shahzada, Khan / Bibi, Tayyaba / Ahmed, Asfandyar / Ullah, Hanif	Seismic performance evaluation of crumb rubber concrete frame structure using shake table test	41-49
Dong, Baiping / Chen, Yueshi / Wang, Wei	Self-centering mechanism and seismic response of steel tension-only concentrically braced beam-through frames	960-972
Kim, Hyung-Joon / Shin, Dong-Hyeon	Shake table test program of cold-formed steel in-plane partition walls	503-517
Yang, Yuanzhang / Shu, Jiangpeng / Zhao, Weijiang / Orr, John	Shear design method for non-prismatic concrete beams reinforced using W-FRP	667-677
Jawad, Farqad K. J. / Ozturk, Celal / Dansheng, Wang / Mahmood, Mohammed / AL-Azzawi, Osama / Al-Jemely, Anas	Sizing and layout optimization of truss structures with artificial bee colony algorithm	546-559
Chanthamanivong, Khongkham / Ario, Ichiro / Chikahiro, Yuki	Smart design of coupling scissors-type bridge	206-216
Tazarv, Mostafa / Shrestha, Grishma / Saiidi, M. Saiid	State-of-the-art review and design of grouted duct connections for precast bridge columns	895-909
Du, Y. X. / Shao, X. / Chu, S. H. / Zhou, F. / Su, R. K. L.	Strengthening of preloaded RC beams using prestressed carbon textile reinforced mortar plates	735-744
Caçoilo, A. / Mourão, R. / Teixeira-Dias, F. / Lecompte, D. / Rush, D.	Structural response of corrugated plates under blast loading: The influence of the pressure-time history	531-545
Civera, Marco / Calamai, Giulia / Zanotti Fragonara, Luca	System identification via Fast Relaxed Vector Fitting for the Structural Health Monitoring of masonry bridges	277-293
Dai, Lizhao / Chen, Hong / Wang, Lei / Ma, Yafei / Zhang, Jianren	Transfer length prediction in pre-tensioned concrete beams under corrosive cracking	938-948
Zhen-jun, He / Yan-ni, Ma / Zhen-wei, Wang / Xiao-jie, Zhang / Xue-sheng, Zhang / Meng-jia, Ding / Chuan, Fu	Triaxial strength and deformation characteristics and its constitutive model of high-strength concrete before and after high temperatures	1127-1138
Akbarzadeh, Neda / Tariverdilo, Saeed / Emamyari, Alireza	Vibration of submerged floating tunnels under asynchronous support excitation	329-337
Baykasoglu, Adil / Baykasoğlu, Cengiz	Weighted superposition attraction-repulsion (WSAR) algorithm for truss optimization with multiple frequency constraints	253-264

Über diese
Datenseite
IssueID
55712
Veröffentlicht am:
22.01.2021
Geändert am:
09.05.2022

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Structures - April 2021

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Structures - April 2021

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.