Structures - December 2020

Published:	December 2020

Articles in this Issue

Author(s)	Title	Page(s)
Li, Tinghui / Lin, Junqi / Liu, Jinlong	Analysis of time-dependent seismic fragility of the offshore bridge under the action of scour and chloride ion corrosion	1785-1801
Cui, Wenbin / Wang, Lai / Chen, Huirong / Chen, Haitao / Liu, Su	The analysis on the seismic behavior of T-shaped prefabricated special-shaped CFST with rectangular multi-cell columns	803-815
Zarringol, Mohammadreza / Thai, Huu-Tai / Thai, Son / Patel, Vipulkumar	Application of ANN to the design of CFST columns	2203-2220
Yazarlu, Abbas / Dehestani, Mehdi	Application of discrete element method (DEM) in characterization of bond-slip behavior in RC beams with confinement subjected to corrosion	1965-1976
Xue, He / He, Jinxuan / Jia, Wenna / Zhang, Jianlong / Wang, Shuai / Zhang, Shun / Yang, Hongliang / Wang, Zheng	An approach for obtaining mechanical property of austenitic stainless steel by using continuous indentation test analysis	2752-2759
Zhang, Zhenhao / Li, Wenbiao / Ding, Zhouxiang / Wu, Xueyan	An approach to the selection of target reliability index of Cable-stayed bridge's main girder based on optimal structural parameter ratio from cost-benefit analysis	2221-2231
Mantzaroudis, V. K. / Stamatelos, D. G.	An approximate closed-form buckling solution for the local skin buckling of stiffened plates with omega stringers: The case of antisymmetric cross-ply and angle-ply laminations	1196-1209
Ali, Mujahid / Room, Shah / Khan, Muhammad Imran / Masood, Faisal / Ali Memon, Rizwan / Khan, Razaullah / Memon, Abdul Muhaimin	Assessment of local earthen bricks in perspective of physical and mechanical properties using Geographical Information System in Peshawar, Pakistan	2549-2561
Varadharajan, S. / Jaiswal, Animesh / Verma, Shwetambara	Assessment of mechanical properties and environmental benefits of using rice husk ash and marble dust in concrete	389-406
Su, Liang / Huang, Xin / Song, Ming-liang / Michael Lafave, James	Automatic identification of modal parameters for structures based on an uncertainty diagram and a convolutional neural network	369-379
Akın, Emre / Tunaboyu, Onur / Avşar, Özgür	Axial behavior of FRP confined low-strength concrete with polyurea	1774-1784
Xu, Zhifeng / Zhang, Jing / Chen, Zhongfan / Yang, Suhang / Li, Jie	Axial compressive behavior of new HFC-filled CTS composite walls sheathed with straw-fiber boards	2582-2595
Yan, Jia-Bao / Chen, Anzhen / Wang, Tao	Axial compressive behaviours of steel–concrete-steel sandwich composite walls with novel enhanced C-channels	407-423
Guo, Xiaonong / Zeng, Qiang / Zhu, Shaojun / Huang, Zewei	Bearing capacity of bolted ball-cylinder joint under uniaxial tensile force	562-576
Rakshith, B. D. / Suneel Kumar, M.	Behaviour of steel columns with realistic boundary restraints under standard fire	626-637
Mohammadzadeh, Behzad / Kang, Junsuk / Im, Seokbeen	Blast loaded plates: Simplified analytical nonlinear dynamic approach	2034-2046
Choubey, Bishwajeet / Dutta, Sekhar Chandra / Prakhya, Ganga Kasi V. / Mandal, Parthasarathi / Kumar Tanwar, Rajesh	Blast pressure analysis due to confined explosion-after effects	521-536
Chang, Lang-Zi / Messali, Francesco / Esposito, Rita	Capacity of unreinforced masonry walls in out-of-plane two-way bending: A review of analytical formulations	2431-2447
Tellier, Xavier / Douthe, Cyril / Hauswirth, Laurent / Baverel, Olivier	Caravel meshes: A new geometrical strategy to rationalize curved envelopes	1210-1228
Zhang, Sigong / Chui, Ying Hei	Characterizing flexural behaviour of panel-to-panel connections in cross-laminated timber floor systems	2047-2055
Cai, Yancheng / Kwan, Albert K. H. / Li, Leo G.	Circular concrete filled steel tubes made of eco-concrete with limestone fines added as cementitious paste replacement	69-79
Rooshenas, Arash	Comparing pushover methods for irregular high-rise structures, partially infilled with masonry panels	337-353
Abedini, M. / Zhang, Chunwei / Mehrmashhadi, J. / Akhlaghi, E.	Comparison of ALE, LBE and pressure time history methods to evaluate extreme loading effects in RC column	456-466
Zhang, Tao / Ding, Fa-xing / Liu, Xue-mei / Yu, Zhi-wu	Compressive behavior of steel-reinforced concrete-filled circular steel tubular stub columns	863-877
Liu, Tao / Yu, Qingliang / Fan, Jianfeng / Peng, Ziqiang / Wang, Erlei	Concrete spherical joint contact stress distribution and overturning moment of swing bridge	1187-1195
Liew, A.	Constrained Force Density Method optimisation for compression-only shell structures	1845-1856
Furtado, André / Rodrigues, Hugo / Arêde, António / Varum, Humberto	Cost-effective analysis of textile-reinforced mortar solutions used to reduce masonry infill walls collapse probability under seismic loads	141-157
Appa Rao, G. / Poluraju, P.	Cyclic behaviour of precast reinforced concrete sandwich slender walls	80-92
Kheyroddin, Ali / Dabiri, Hamed	Cyclic performance of RC beam-column joints with mechanical or forging (GPW) splices; an experimental study	2562-2571
Shin, Dong-Hyeon / Kim, Hyung-Joon	Cyclic response of rectangular RC columns retrofitted by hybrid FRP sheets	697-712
Yazdanian, Mohsen / Ingham, Jason / Kahanek, Christopher / Dizhur, Dmytro	Damage assessment of catwalks following the 2016 Kaikōura earthquake	1977-1990
Tarawneh, Ahmad / Majdalaweyh, Sereen	Design and reliability analysis of FRP-reinforced concrete columns	1580-1588
Matti, Feleb N. / Mashiri, Fidelis R.	Design formulae for predicting the stress concentration factors of concrete-filled T-joints under out-of-plane bending	2073-2095
Ghaffarzadeh, Hosein / Younespour, Amir / Cheng, Shaohong	Design of a tuned mass damper for damped structures using an orthogonal-function-based equivalent linearization method	2605-2616
Harirchian, Ehsan / Lahmer, Tom	Developing a hierarchical type-2 fuzzy logic model to improve rapid evaluation of earthquake hazard safety of existing buildings	1384-1399
Al-Sibahy, Adnan / Mashshay, Safaa	Development of hybrid ECC columns subjected to concentric and eccentric loading	309-320
Yuen, Terry Y. P. / Halder, Rudhra / Chen, Wang-Wen / Zhou, Xiangming / Deb, Trissa / Liu, Yang / Tseng, Yang / Wen, Tzu-Han	DFEM of a post-tensioned precast concrete segmental bridge with unbonded external tendons subjected to prestress changes	1322-1337
Aldhafairi, Faisal / Hassan, Ahmed / Abd-EL-Hafez, L. M. / Abouelezz, A. E. Y.	Different techniques of steel jacketing for retrofitting of different types of concrete beams after elevated temperature exposure	713-725
Salek Faramarzi, Mohammadreza / Taghikhany, Touraj	Direct performance-based seismic design of strongback steel braced systems	482-495
Zingoni, Alphose / Enoma, Nosakhare	Dual-purpose concrete domes: A strategy for the revival of thin concrete shell roofs	2686-2703
Ngo, Tuan T. / Pham, Thong M. / Hao, Hong	Ductile and dry exterior joints using CFRP bolts for moment-resisting frames	668-684
Hashemi, Ashkan / Zarnani, Pouyan / Quenneville, Pierre	Earthquake resistant timber panelised structures with resilient connections	225-234
Yang, Hongliang / Xue, He	Effect of cold working on crack growth rate of environmentally assisted cracking of 316L SS	446-455
Tamaddon, S. / Hosseini, M. / Vasseghi, A.	The effect of curvature angle of curved RC box-girder continuous bridges on their transient response and vertical pounding subjected to near-source earthquakes	1019-1034
Pourfallahi, M. / Nohegoo-Shahvari, A. / Salimizadeh, M.	Effect of direct addition of two different bacteria in concrete as self-healing agent	2646-2660
Jalaeefar, Ali / Zargar, Azam	Effect of infill walls on behavior of reinforced concrete special moment frames under seismic sequences	766-773
Gao, Xiangyu / Li, Yanglong / Li, Jianqin / Xu, Jimin	Effect of steel braces buckling on inelastic torsion and design prevention of steel braced concrete frame structure	1687-1700
Sajed, Mohsen / Tehrani, Payam	Effects of column and superstructure irregularity on the seismic response of four-span RC bridges	1400-1412
Jafarian, Navid / Mostofinejad, Davood / Naderi, Ali	Effects of FRP grids on punching shear behavior of reinforced concrete slabs	2523-2536
Di Sarno, Luigi / Amiri, Saeed / Garakaninezhad, Alireza	Effects of incident angles of earthquake sequences on seismic demands of structures	1244-1251
Zhao, Zhixin / Wang, Wenhua / Shi, Wei / Li, Xin	Effects of second-order hydrodynamics on an ultra-large semi-submersible floating offshore wind turbine	2260-2275
Rezaiee-Pajand, Mohammad / Rajabzadeh-Safaei, Niloofar / Masoodi, Amir R.	An efficient curved beam element for thermo-mechanical nonlinear analysis of functionally graded porous beams	1035-1049
Duan, Kang-Kang / Cao, Shuang-Yin	Emerging RFID technology in structural engineering – A review	2404-2414
Zargarzadeh, Ali / Mojtahedi, Alireza / Mohammadyzadeh, Samira / Hokmabady, Hamid	Employing an improved cross model cross mode algorithm for damage detection of a steel offshore platform frame using experimental data	1589-1600
Yaghmaei-Sabegh, Saman / Jafari-Koucheh, Ebrahim / Ebrahimi-Aghabagher, Mehdi	Estimating the seismic response of nonlinear structures equipped with nonlinear viscous damper subjected to pulse-like ground records	1915-1923
Pachideh, Ghasem / Kafi, Mohammadali / Gholhaki, Majid	Evaluation of cyclic performance of a novel bracing system equipped with a circular energy dissipater	467-481
Shakib, Hamzeh / Zakersalehi, Maedeh / Jahangiri, Vahid / Zamanian, Reza	Evaluation of Plasco Building fire-induced progressive collapse	205-224
Ferreira, Gabriel Soares / Pimentel, Roberto Leal / Barbosa, Flávio de Souza	Evaluation of two crack models for reinforced concrete one-way slabs subjected to bending by means of modal tests	2013-2022
Li, Haitao / Su, Jingwen / Xiong, Zhenhua / Ashraf, Mahmud / Corbi, Ileana / Corbi, Ottavia	Evaluation on the ultimate bearing capacity for laminated bamboo lumber columns under eccentric compression	1572-1579
Akhlaghi, Alireza / Mostofinejad, Davood	Experimental and analytical assessment of different anchorage systems used for CFRP flexurally retrofitted exterior RC beam-column connections	881-893
Abadel, Aref / Abbas, Husain / Alrshoudi, Fahed / Altheeb, Ali / Albidah, Abdulrahman / Almusallam, Tarek	Experimental and analytical investigation of fiber alignment on fracture properties of concrete	2572-2581
Nassani, Dia Eddin	Experimental and analytical study of the mechanical and flexural behavior of hybrid fiber concretes	1746-1755
Huang, Qian / Hamed, Ehab / Gilbert, R. Ian	Experimental and numerical investigation of the creep response of precast concrete sandwich panels	2096-2110
Albu-Hassan, Nuha Hussein / Al-Thairy, Haitham	Experimental and numerical investigation on the behavior of hybrid concrete beams reinforced with GFRP bars after exposure to elevated temperature	537-551
Wang, Guojue / Li, Yingmin / Li, Zhe / Ingham, Jason M.	Experimental and numerical study of precast concrete columns with hybrid bolted splice connections	17-36
Lian, Ming / Guan, Binlin / Cheng, Qianqian / Zhang, Hao / Su, Mingzhou	Experimental and numerical study of seismic performance of high-strength steel fabricated framed-tube structures with replaceable shear links	2714-2732
Zhang, Pu / Liu, Xuan-Yu / Li, Qi-Long / Deng, En-Feng / Gao, Dan-Ying / Zhang, Zhe / Sheikh, Shamim Ahmed	Experimental and theoretical studies on the shear performance of innovative box-shape FRP profile-concrete hybrid beams	2772-2784
Parajuli, Rishi Ram / Furukawa, Aiko / Gautam, Dipendra	Experimental characterization of monumental brick masonry in Nepal	1314-1321
Nguyen, Minh Hai / Hirano, Yuma / Nakajima, Akinori / Fujikura, Shuichi / Niimura, Ryo	Experimental evaluation of the shear capacity of perfobond strips with steel fiber-reinforced mortar in narrow joint structures	1173-1186
Fazeli Kelareh, Mohammadreza / Aghayari, Reza / Tahamouli Roudsari, Mehrzad	An experimental investigation into dispersion of compressive stress in isolated bottle-shaped struts with openings	1857-1869
Ghoroubi, Rahim / Mercimek, Ömer / Özdemir, Anıl / Anil, Özgür	Experimental investigation of damaged square short RC columns with low slenderness retrofitted by CFRP strips under axial load	170-180
Taghipoor, Hossein / Eyvazian, Arameh / Musharavati, Farayi / Sebaey, T. A. / Ghiaskar, Ahmad	Experimental investigation of the three-point bending properties of sandwich beams with polyurethane foam-filled lattice cores	424-432
Qiao, Wentao / Yin, Xiaoxiang / Zhang, Haiying / Wang, Dong	Experimental study of insulated sandwich concrete wall connections under cyclic loading	2000-2012
Song, Xinyu / Huang, Zhen / Shen, Jie / Yao, Yiming	Experimental study on cyclic behavior of hybrid CFRP grids-steel shear walls	496-511
Li, Guoping / Wang, Jiaqi / Shen, Yin / Li, Liang / Chen, Ming	Experimental study on the combined shear and bending behaviour of corbel joints in precast concrete segmental inverted-T caps	2367-2378
Niu, Lihua / Zheng, Shansuo / Li, Lei	Experimental study on the seismic behavior of masonry walls under offshore environment	433-445
Wang, Bo / Wang, Zhengpeng / Uji, Kimitaka	Experimental verification of a novel anchorage method of CFRP grid in mortar	1646-1660
Akbari Hamed, Arash / Basim, Mohammad Charkhtab	Experimental-numerical study on weakened HSS-to-HSS connections using HBS and RBS approaches	1449-1465
Farrokh Ghatte, Hamid	Failure mechanisms and cracking performance of T-shaped SCC beam-column connections at top floor: Test results and FE modeling	1009-1018
Wang, Qiudong / Ji, Bohai / Xia, Junyuan / Fu, Zhongqiu	Fatigue assessment of rib-deck welds in orthotropic steel decks integrating the effect of load dispersal through asphalt surfacing	1701-1712
Zhuang, Meiling / Miao, Changqing	Fatigue reliability assessment for hangers of a special-shaped CFST arch bridge	235-250
Li, Hongmin / Lam, Frank / Qiu, Hongxing	Feasibility of the analytical model for the splice beam with half-lap joints reinforced with different cross-sections and layout of self-tapping screws	120-126
Burton, C. / Visintin, P. / Griffith, M. / Vaculik, J.	Field testing of vintage masonry: Mechanical properties and anchorage strengths	1900-1914
Ibrahim, Mostafa Mohamed / El Aghoury, Ihab Mohamed / Ibrahim, Sherif Abdel-Basset	Finite element investigation on plate buckling coefficients of tapered steel members web plates	2321-2334
Guo, Xiaonong / Zhu, Shaojun / Jiang, Shouchao / Zhang, Chaozhong / Chen, Chen	Fire tests on single-layer aluminum alloy reticulated shells with gusset joints	1137-1152
El-Sayed, Taha A. / Shaheen, Yousry B. I.	Flexural performance of recycled wheat straw ash-based geopolymer RC beams and containing recycled steel fiber	1713-1728
Tayeh, Bassam A. / Abu Maraq, Mohamed A. / Ziara, Mohamed M.	Flexural performance of reinforced concrete beams strengthened with self-compacting concrete jacketing and steel welded wire mesh	2146-2162
Ghandi, Elham / Niari, Shirin Esmaeili	Flexural-torsional buckling of cold-formed steel columns with arbitrary cross-section under eccentric axial load	2122-2134
Chaudhary, Ranjit Kumar / Roy, Tathagata / Matsagar, Vasant	Framework for fragility assessment of reinforced concrete portal frame subjected to elevated temperature	2785-2800
Liu, Qifang / Looi, Daniel Ting-Wee / Hongniao Chen, Helen / Tang, Chen / Su, Ray Kai Leung	Framework to optimise two-dimensional DIC measurements at different orders of accuracy for concrete structures	93-105
Twinkle, C. M. / Pitchaimani, Jeyaraj / Rajamohan, Vasudevan	Free vibration modes of rectangular plate under non-uniform heating: An experimental investigation	1802-1817
Al Rjoub, Yousef S. / Alshatnawi, Jinan A.	Free vibration of functionally-graded porous cracked plates	2392-2403
Türkmen, Ö. S. / Wijte, S. N. M. / Vaculik, J. / De Vries, B. T. / Ingham, J. M.	High-speed pullout behavior of deep-mounted cfrp strips bonded with a flexible adhesive to clay brick masonry	1153-1172
Ganta, Jyothi Kumari / Seshagiri Rao, M. V. / Mousavi, Seyed Sina / Reddy, V. Srinivasa / Bhojaraju, Chandrasekhar	Hybrid steel/glass fiber-reinforced self-consolidating concrete considering packing factor: Mechanical and durability characteristics	956-972
Patil, Shreekant / Reddy, D. Mallikarjuna	Impact damage assessment in carbon fiber reinforced composite using vibration-based new damage index and ultrasonic C-scanning method	638-650
Asad, Mohammad / Dhanasekar, Manicka / Zahra, Tatheer / Thambiratnam, David	Impact mitigation of masonry walls with carbon fibre and Auxetic fibre composite renders – A numerical study	2733-2751
Ramaglia, Giancarlo / Fabbrocino, Francesco / Lignola, Gian Piero / Prota, Andrea	Impact of FRP and FRCM on the ductility of strengthened masonry members	1229-1243
Murali, G. / Abid, Sallal R. / Mugahed Amran, Y. H. / Abdelgader, Hakim S. / Fediuk, Roman / Susrutha, Arikatla / Poonguzhali, K.	Impact performance of novel multi-layered prepacked aggregate fibrous composites under compression and bending	1502-1515
Hasap, Anat / Noraphaiphipaksa, Nitikorn / Kanchanomai, Chaosuan	Influence of malposition on the performance of elastic rail clip: Toe load, stress, and friction	2661-2670
He, Weikun / Jiang, Lizhong / Wei, Biao / Wang, Zhenwei	The influence of pier height on the seismic isolation effectiveness of friction pendulum bearing for Double-Track railway bridges	1870-1884
Yuan, Ye / Zhang, Ni / Liu, Haiqing / Zhao, Zhongwei / Fan, Xiongtao / Zhang, Hongwei	Influence of random pit corrosion on axial stiffness of thin-walled circular tubes	2596-2604
Aydin, Ersin / Ozturk, Baki / Bogdanovic, Aleksandra / Farsangi, Ehsan Noroozinejad	Influence of soil-structure interaction (SSI) on optimal design of passive damping devices	847-862
Kanbir, Zafer / Alhan, Cenk / Özdemir, Gökhan	Influence of superstructure modeling approach on the response prediction of buildings with LRBs considering heating effects	1756-1773
Almitani, Khalid H. / Abdelrahman, Alaa A. / Eltaher, Mohamed A.	Influence of the perforation configuration on dynamic behaviors of multilayered beam structure	1413-1426
Liang, Wenyan / Bonsu, Alex Osei / Lv, Hongqing / Yang, Bin / Liu, Chang / Deng, Jingjing	Intumescent coating thickness effect on the post-heat mechanical properties of composites	2056-2072
Usefvand, Mahdi / Maleki, Ahmad / Alinejad, Babak	Investigate of damage index of coupled steel plate shear walls (C-SPSW) system under seismic loading	614-625
Li, Jinhua / Zhang, Huantao / Chen, Shuisheng	Investigation of axle-span ratio and moving load speed affecting bridge extreme response using a moving load amplitude spectrum method	2633-2645
Yuan, Siqi / Liu, Zhao / Tong, Teng	Investigation of over-nonlocal damage and interface cohesive models for simulating structural behaviors of composite UHPC-NC members	2617-2632
Feng, Zhibin / Gong, Jinxin	Investigation on residual displacements for SDOF systems with various initial viscous damping models	1831-1844
Tafsirojjaman, T. / Fawzia, Sabrina / Thambiratnam, David	Investigation on the behaviour of CFRP strengthened CHS members under monotonic loading through finite element modelling	297-308
Areiza-Hurtado, Mauricio / Aristizabal-Ochoa, J. Dario	Large-deflection analysis of prismatic and tapered beam-columns using the Differential Transform Method	923-932
Erfani, Saeed / Akrami, Vahid / Mohammad-nejad, Arash	Lateral load resisting behavior of steel moment frames with reduced web section (RWS) beams	251-265
Šorf, Marek / Jandera, Michal	Lateral-torsional buckling of slender cross-section stainless steel beams	1466-1478
Manalo, A. C. / Alajarmeh, O. / Cooper, D. / Sorbello, C. D. / Weerakoon, S. Z. / Benmokrane, B.	Manufacturing and structural performance of glass-fiber-reinforced precast-concrete boat ramp planks	37-56
Chen, Jun / Zhao, Chenhui / Ding, Fa-xing / Duan, Quancheng / Cao, Zimei / Xu, Fu / Yang, Cai-qian / Lu, Dagang / Xiang, Ping	Mechanical performance of the grouted lapped double reinforcements anchored in embedded corrugated sleeves	1354-1365
Georgoussis, George K. / Mamou, Anna	Mitigating mass eccentricity effects on the rotational response of setbacks structures: An analytical solution for linear systems	1539-1556
Zhang, Lixian / Michailides, Constantine / Wang, Yapo / Shi, Wei	Moderate water depth effects on the response of a floating wind turbine	1435-1448
Diab, Hesham M. A. / Abdelaleem, Tarek / Rashwan, Mohamed M. M.	Moment redistribution and flexural performance of RC continuous T-beams strengthened with NSM FRP or steel bars	1516-1538
Ghayoumian, Golnaz / Emami, Ali R.	A multi-direction pushover procedure for seismic response assessment of low-to-medium-rise modern reinforced concrete buildings with special dual system having torsional irregularity	1077-1107
Mehar, Kulmani / Panda, Subrata Kumar / Dewangan, Hukum Chand	Multiscale finite element prediction of thermomechanical flexural strength of nanotube-reinforced hybrid smart composite panel bonded with SMA fibre	2300-2310
Mirabi Banadaki, Hosein / Eslami, Abolfazl / Ronagh, Hamid	Near-surface-mounted retrofitting of damaged/undamaged adobe walls using steel bars: Analytical evaluation of experimental results	2111-2121
Toğan, Vedat / Berberoğlu, Neslihan / Başağa, Hasan Basri	New adaptive weight formulations for time-cost optimization	2291-2299
Younis, Abdul-Aziz / Ramadan, Abdullah S. / Wong, Lui Sammy / Nehdi, Moncef L.	New rational test for reinforced-concrete pipe eliminating subjective crack-width criteria	2507-2522
Pérez-Valcárcel, J. / Suárez-Riestra, F. / Muñoz-Vidal, M. / López-César, I. / Freire-Tellado, M. J.	A new reciprocal linkage for expandable emergency structures	2023-2033
Li, Hui / Liu, Yongjian / Zhang, Ning	Non-linear distributions of bond-slip behavior in concrete-filled steel tubes by the acoustic emission technique	2311-2320
Ali, Ahmed H. / Gouda, Ahmed / Mohamed, Hamdy M. / Rabie, Mohamed H. / Benmokrane, Brahim	Nonlinear finite elements modeling and experiments of FRP-reinforced concrete piles under shear loads	106-119
Shaheen, Mohamed A. / Foster, Andrew S. J. / Cunningham, Lee S.	A novel device to improve robustness of end plate beam-column connections	2415-2423
Bharti, Kundan / Kumaraswamidhas, L. A. / Das, R. R.	A novel optimization approach for bonded tubular gap K-joints made of FRP composites	2135-2145
Ahmed, Mizan / Liang, Qing Quan	Numerical analysis of thin-walled round-ended concrete-filled steel tubular short columns including local buckling effects	181-196
Mao, Wen-Jing / Wang, Wen-Da / Xian, Wei	Numerical analysis on fire performance of steel-reinforced concrete-filled steel tubular columns with square cross-section	1-16
Parvari, Ali / Zahrai, Seyed Mehdi / Mirhosseini, S. Mohammad / Zeighami, Ehsanollah	Numerical and experimental study on the behavior of drilled flange steel beam to CFT column connections	726-740
Fikri, Rijalul / Derakhshan, Hossein / Ingham, Jason	Numerical evaluation of a non-ductile RCFMI building subjected to the Canterbury, New Zealand Earthquakes: A case study of the St Elmo Courts building	991-1008
Sediek, Omar A. / Safar, Sherif S. / Hassan, Maha M.	Numerical investigation on shear strength of tapered perfect end web panels	354-368
Sahoo, Prakash Ranjan / Barik, Manoranjan	A numerical investigation on the dynamic response of stiffened plated structures under moving loads	1675-1686
Nyunn, Sandy / Wang, Feiliang / Yang, Jian / Liu, Qing-feng / Azim, Iftikhar / Bhatta, Sanjeev	Numerical studies on the progressive collapse resistance of multi-story RC buildings with and without exterior masonry walls	1050-1059
Hamzeh, Layane / Hassanein, Ahmed / Galal, Khaled	Numerical study on the seismic response of GFRP and steel reinforced masonry shear walls with boundary elements	1946-1964
Rinaldin, Giovanni / Fasan, Marco / Sancin, Ljuba / Amadio, Claudio	On the behaviour of steel CBF for industrial buildings subjected to seismic sequences	2175-2187
Ghasemi, Mahdi / Talaeitaba, Sayed Behzad	On the effect of seismic base isolation on seismic design requirements of RC structures	2244-2259
Gatheeshgar, Perampalam / Poologanathan, Keerthan / Gunalan, Shanmuganathan / Shyha, Islam / Tsavdaridis, Konstantinos Daniel / Corradi, Marco	Optimal design of cold-formed steel lipped channel beams: Combined bending, shear, and web crippling	825-836
Taiyari, F. / Kharghani, M. / Hajihassani, M.	Optimal design of pile wall retaining system during deep excavation using swarm intelligence technique	1991-1999
Kaveh, A. / Javadi, S. M. / Mahdipour Moghanni, R.	Optimal structural control of tall buildings using tuned mass dampers via chaotic optimization algorithm	2704-2713
Li, Jinhua / Zhang, Huantao / Chen, Shuisheng / Zhu, Desen	Optimization and sensitivity of TMD parameters for mitigating bridge maximum vibration response under moving forces	512-520
Duong, Huan Thanh / Phan, Hieu Chi / Le, Tien-Thinh / Duc Bui, Nang	Optimization design of rectangular concrete-filled steel tube short columns with Balancing Composite Motion Optimization and data-driven model	757-765
Alhaddad, Wael / Halabi, Yahia / Meree, Hani / Yu, Zhixiang	Optimum design method for simplified model of outrigger and ladder systems in tall buildings using genetic algorithm	2467-2487
Talatahari, Siamak / Azizi, Mahdi	Optimum design of building structures using Tribe-Interior Search Algorithm	1616-1633
Wang, C. Y.	The optimum elastica catenary cable	878-880
Tao, Tianyou / Wang, Hao / Gao, Yuqi	Parametric analysis on flutter performance of a long-span quadruple-tower suspension bridge	1108-1118
Vendramell Ferreira, Felipe Piana / Martins, Carlos Humberto / De Nardin, Silvana	A parametric study of steel-concrete composite beams with hollow core slabs and concrete topping	276-296
Agarwal, Preeti / Pal, Priyaranjan / Mehta, Pradeep Kumar	Parametric study on skew-curved RC box-girder bridges	380-388
Yang, Haibo	Performance analysis of semi-rigid connections in prefabricated high-rise steel structures	837-846
Bengar, Habib Akbarzadeh / Mousavi, Moein	Performance of an innovative anchorage system for strengthening RC beams in adjacency of columns with FRP laminates	197-204
Mashhadi, Sima / Asadi, Azita / Homaei, Farshad / Tajammolian, Hamed	The performance-based seismic response of special steel MRF: Effects of pulse-like ground motion and foundation safety factor	127-140
Zhao, Hong-Chao / Ye, Yu-Yi / Zeng, Jun-Jie / Zhou, Jie-Kai / Ouyang, Yi	Polyethylene terephthalate fibre-reinforced polymer-confined concrete encased high-strength steel tube hybrid square columns: Axial compression tests	577-588
Raza, Ali / Shah, Syyed Adnan Raheel / ul Haq, Faraz / Arshad, Hunain / Raza, Syed Safdar / Farhan, Muhammad / Waseem, Muhammad	Prediction of axial load-carrying capacity of GFRP-reinforced concrete columns through artificial neural networks	1557-1571
Liu, Haiqing / Xu, Qian / Wang, Qinghe / Zhang, Yuzhuo	Prediction of the elastic modulus of concrete with spontaneous-combustion and rock coal gangue aggregates	774-785
Gao, Jianxiong / Yuan, Yiping	Probabilistic model of fatigue damage accumulation of materials based on the principle of failure probability equivalence	659-667
Homaei, Farshad / Yazdani, Mahdi	The probabilistic seismic assessment of aged concrete arch bridges: The role of soil-structure interaction	894-904
Esfandiari, M. J. / Urgessa, G. S.	Progressive collapse design of reinforced concrete frames using structural optimization and machine learning	1252-1264
Wang, Bo-Wei / Tang, Wen-Zhong / Song, Lu-Kai / Bai, Guang-Chen	PSO-LSSVR: A surrogate modeling approach for probabilistic flutter evaluation of compressor blade	1634-1645
Kala, Zdenek	Quantile-based versus Sobol sensitivity analysis in limit state design	2424-2430
Kaveh, A. / Kamalinejad, M. / Arzani, H.	Quantum evolutionary algorithm hybridized with Enhanced colliding bodies for optimization	1479-1501
Yuan, Wei / Cai, Zhongkui / Guo, Anxin	Rapid determination method of the seismic failure modes of coastal bridge columns in the whole life cycle	943-955
Lai, Zhichao / Yao, Pengyu / Huang, Wenjin / Chen, Baochun / Ying, Zheng	Reactive powder concrete-filled steel tube (RPCFT) members subjected to axial tension: Experimental study and design	933-942
Shi, Dongyan / Ma, Hui / He, Dongze / Gou, Yuxin	A remaining useful life estimation model of drop system based on data driven and Bayesian theory	329-336
Ayash, Nehal M. / Abd-Elrahman, Ahmed M. / Soliman, Abd-Elaziz	Repairing and strengthening of reinforced concrete cantilever slabs using Glass Fiber–Reinforced Polymer (GFRP) wraps	2488-2506
Bahrebar, Milad / Lim, James B. P. / Clifton, George Charles / Zirakian, Tadeh / Shahmohammadi, Amir / Hajsadeghi, Mohammad	Response assessment and prediction of low yield point steel plate shear walls with curved corrugated web plates and reduced beam sections	1729-1745
Haddad, Rami H. / Yaghmour, Emad M.	Retrofitting Heat-Damaged concrete beams using different profiles of side NSM CFRP strips	2232-2243
Thai, Huu-Tai / Ngo, Tuan / Uy, Brian	A review on modular construction for high-rise buildings	1265-1290
Chaves, Estefanía A. / Filippoupolitis, Marios / Mendes, Nuno / Lourenço, Paulo B.	Safety assessment of the South Oculus of Canterbury Cathedral	1427-1434
Hassan, Maha M. / Ramadan, Hazem M. / Abdel-Mooty, Mohamed / Mourad, Sherif A.	Seismic behavior of braced frames with different connection details to concrete filled tube columns	2379-2391
Liu, Yashuang / Ma, Hua / Li, Zhenbao / Wang, Wenjing	Seismic behaviour of full-scale prefabricated RC beam–CFST column joints connected by reinforcement coupling sleeves	2760-2771
Garivani, Sadegh / Askariani, Seyed Saeed / Aghakouchak, Ali Akbar	Seismic design of structures with yielding dampers based on drift demands	1885-1899
Yu, Yujie / Man, Mengke / Zhang, Chao / Ding, Faxing	Seismic performance and working mechanism of innovate bottom-flange-bolted type through-diaphragm connections	1601-1615
Shahsahebi, Amir / Waezi, Zakariya / Hashemi, M. Javad	Seismic performance assessment of multi-story RC buildings with soft-story collapse mechanism equipped with gapped inclined bracing (GIB)	2448-2466
Zhou, Zhongyi / Wang, Tao / Hui, Cun / Li, Jianhua	Seismic performance evaluation of assembled GCFST column-section steel beam frames with geopolymer concrete walls	2537-2548
Pang, Yutao / Cai, Li / Zhong, Jian	Seismic performance evaluation of fiber-reinforced concrete bridges under near-fault and far-field ground motions	1366-1383
Jafarieh, Amir Hossein / Ghannad, Mohammad Ali	Seismic performance of nonlinear soil-structure systems located on soft soil considering foundation uplifting and soil yielding	973-982
Elci, Hasan	Seismic strengthening of improperly repaired reinforced concrete columns using CFRP confinement	266-275
Kimura, Toshiaki / Ohsaki, Makoto / Fujita, Shinnosuke / Michiels, Tim / Adriaenssens, Sigrid	Shape optimization of no-tension arches subjected to in-plane loading	158-169
Naderpour, Hosein / Haji, Mohammad / Mirrashid, Masoomeh	Shear capacity estimation of FRP-reinforced concrete beams using computational intelligence	321-328
Zhao, Wei / Lu, Senqiang / Jing, Xiuying	Shear performance of high-strength bolt connector considering different pad and bolt hole	1291-1300
Khalaf, Mohammed Riyadh / Al-Ahmed, Ali Hussein Ali	Shear strength of reinforced concrete deep beams with large openings strengthened by external prestressed strands	1060-1076
Ye, Jihong / Chen, Wenwen	Simplified calculation of fire resistant temperature for cold-formed steel load-bearing composite walls	1661-1674
Yazdani, Abbas / Arab, Hamed Ghohani / Rashki, Mohsen	Simplified spectral stochastic finite element formulations for uncertainty quantification of engineering structures	1924-1945
Carvalho, José P. G. / Lemonge, Afonso C. C. / Hallak, Patricia H. / Vargas, Dênis E. C.	Simultaneous sizing, shape, and layout optimization and automatic member grouping of dome structures	2188-2202
Singh, Surya Dev / Sahoo, Rosalin	Static and free vibration analysis of functionally graded CNT reinforced composite plates using trigonometric shear deformation theory	685-696
Safari, Pouria / Broujerdian, Vahid	Strategies to increase the survivability of steel connections in fire	2335-2354
Yang, Jia-qi / Smith, Scott T. / Wu, Yu-Fei / Feng, Peng	Strengthening single-bolt timber joints with externally bonded CFRP composites	2671-2685
NadimiShahraki, Kourosh / Reisi, Mohammad	Stress-strain based method for analysis and design of FRP wrapped reinforced concrete columns	1818-1830
Quinn, Gregory	Structural analysis for the pneumatic erection of elastic gridshells	2276-2290
Huang, Minshui / Li, Xifan / Lei, Yongzhi / Gu, Jianfeng	Structural damage identification based on modal frequency strain energy assurance criterion and flexibility using enhanced Moth-Flame optimization	1119-1136
Gupta, Krishanu / Bhattacharjee, Biplab / Kumar Gupta, Sonu / Chakraborti, Prasun	Study of natural frequencies of natural rubber cored novel sandwich structure without tip mass	651-658
Tafsirojjaman, T. / Fawzia, Sabrina / Thambiratnam, David P. / Zhao, Xiao-Ling	Study on the cyclic bending behaviour of CFRP strengthened full-scale CHS members	741-756
He, Liusheng / Khadka, Binod	Study on the extended steel plate connection for steel slit shear walls	816-824
Xin, Yajun / Wu, Junqi / Wu, Qingbo / Cui, Weilong / Zhang, Shilian / Cheng, Shuliang	Study on the sickle anchoring joint in external prestressing strengthening of portal frame	552-561
Moutassem, Fayez / Miqdadi, Issam	Sustainability-model approach for chloride permeability based on concrete mixture	983-990
Huang, Xu-Hao / Yang, Jian / Bai, Li / Wang, Xing-er / Ren, Xin	Theoretical solutions for auxetic laminated beam subjected to a sudden load	57-68
Peng, Liu / Xiaoyong, Luo / Ying, Chen / Zhiwu, Yu / Dayou, Yu	Thermodynamic and acoustic behaviors of prefabricated composite wall panel	1301-1313
Haque Chaudhuri, Chaidul / Chanda, Diptesh / Saha, Rajib / Haldar, Sumanta	Three-dimensional numerical analysis on seismic behavior of soil-piled raft-structure system	905-922
Jia, Hong-Yu / Yue, Wei-Qin / Zheng, Shi-Xiong / Gou, Hong-Ye / Zhao, Can-Hui / You, Gang	Time-dependent pounding probability analysis between adjacent decks of bridges under non-stationary stochastic seismic excitations	2355-2366
Han, Lu / Wang, Jingxiong / Li, Hongjing / Sun, Guangjun	A time-domain spectral element method with C1 continuity for static and dynamic analysis of frame structures	604-613
Deifalla, A.	Torsion design of lightweight concrete beams without or with fibers: A comparative study and a refined cracking torque formula	786-802
Fathizadeh, S. F. / Dehghani, S. / Yang, T. Y. / Farsangi, E. Noroozinejad / Vosoughi, A. R. / Hajirasouliha, I. / Takewaki, I. / Málaga-Chuquitaype, C. / Varum, H.	Trade-off Pareto optimum design of an innovative curved damper truss moment frame considering structural and non-structural objectives	1338-1353
Cavdar, Esengul / Özdemir, Gökhan	Using maximum direction of a ground motion in a code-compliant analysis of seismically isolated structures	2163-2173
Asadi-Ghoozhdi, Hamid / Attarnejad, Reza	A Winkler-based model for inelastic response of soil–structure systems with embedded foundation considering kinematic and inertial interaction effects	589-603

About this
data sheet
IssueID
37539
Published on:
11/09/2020
Last updated on:
09/05/2022

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Structures - December 2020

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Structures - December 2020

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.