Structures - Dezember 2020

Erschienen:	Dezember 2020

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Li, Tinghui / Lin, Junqi / Liu, Jinlong	Analysis of time-dependent seismic fragility of the offshore bridge under the action of scour and chloride ion corrosion	1785-1801
Cui, Wenbin / Wang, Lai / Chen, Huirong / Chen, Haitao / Liu, Su	The analysis on the seismic behavior of T-shaped prefabricated special-shaped CFST with rectangular multi-cell columns	803-815
Zarringol, Mohammadreza / Thai, Huu-Tai / Thai, Son / Patel, Vipulkumar	Application of ANN to the design of CFST columns	2203-2220
Yazarlu, Abbas / Dehestani, Mehdi	Application of discrete element method (DEM) in characterization of bond-slip behavior in RC beams with confinement subjected to corrosion	1965-1976
Xue, He / He, Jinxuan / Jia, Wenna / Zhang, Jianlong / Wang, Shuai / Zhang, Shun / Yang, Hongliang / Wang, Zheng	An approach for obtaining mechanical property of austenitic stainless steel by using continuous indentation test analysis	2752-2759
Zhang, Zhenhao / Li, Wenbiao / Ding, Zhouxiang / Wu, Xueyan	An approach to the selection of target reliability index of Cable-stayed bridge's main girder based on optimal structural parameter ratio from cost-benefit analysis	2221-2231
Mantzaroudis, V. K. / Stamatelos, D. G.	An approximate closed-form buckling solution for the local skin buckling of stiffened plates with omega stringers: The case of antisymmetric cross-ply and angle-ply laminations	1196-1209
Ali, Mujahid / Room, Shah / Khan, Muhammad Imran / Masood, Faisal / Ali Memon, Rizwan / Khan, Razaullah / Memon, Abdul Muhaimin	Assessment of local earthen bricks in perspective of physical and mechanical properties using Geographical Information System in Peshawar, Pakistan	2549-2561
Varadharajan, S. / Jaiswal, Animesh / Verma, Shwetambara	Assessment of mechanical properties and environmental benefits of using rice husk ash and marble dust in concrete	389-406
Su, Liang / Huang, Xin / Song, Ming-liang / Michael Lafave, James	Automatic identification of modal parameters for structures based on an uncertainty diagram and a convolutional neural network	369-379
Akın, Emre / Tunaboyu, Onur / Avşar, Özgür	Axial behavior of FRP confined low-strength concrete with polyurea	1774-1784
Xu, Zhifeng / Zhang, Jing / Chen, Zhongfan / Yang, Suhang / Li, Jie	Axial compressive behavior of new HFC-filled CTS composite walls sheathed with straw-fiber boards	2582-2595
Yan, Jia-Bao / Chen, Anzhen / Wang, Tao	Axial compressive behaviours of steel–concrete-steel sandwich composite walls with novel enhanced C-channels	407-423
Guo, Xiaonong / Zeng, Qiang / Zhu, Shaojun / Huang, Zewei	Bearing capacity of bolted ball-cylinder joint under uniaxial tensile force	562-576
Rakshith, B. D. / Suneel Kumar, M.	Behaviour of steel columns with realistic boundary restraints under standard fire	626-637
Mohammadzadeh, Behzad / Kang, Junsuk / Im, Seokbeen	Blast loaded plates: Simplified analytical nonlinear dynamic approach	2034-2046
Choubey, Bishwajeet / Dutta, Sekhar Chandra / Prakhya, Ganga Kasi V. / Mandal, Parthasarathi / Kumar Tanwar, Rajesh	Blast pressure analysis due to confined explosion-after effects	521-536
Chang, Lang-Zi / Messali, Francesco / Esposito, Rita	Capacity of unreinforced masonry walls in out-of-plane two-way bending: A review of analytical formulations	2431-2447
Tellier, Xavier / Douthe, Cyril / Hauswirth, Laurent / Baverel, Olivier	Caravel meshes: A new geometrical strategy to rationalize curved envelopes	1210-1228
Zhang, Sigong / Chui, Ying Hei	Characterizing flexural behaviour of panel-to-panel connections in cross-laminated timber floor systems	2047-2055
Cai, Yancheng / Kwan, Albert K. H. / Li, Leo G.	Circular concrete filled steel tubes made of eco-concrete with limestone fines added as cementitious paste replacement	69-79
Rooshenas, Arash	Comparing pushover methods for irregular high-rise structures, partially infilled with masonry panels	337-353
Abedini, M. / Zhang, Chunwei / Mehrmashhadi, J. / Akhlaghi, E.	Comparison of ALE, LBE and pressure time history methods to evaluate extreme loading effects in RC column	456-466
Zhang, Tao / Ding, Fa-xing / Liu, Xue-mei / Yu, Zhi-wu	Compressive behavior of steel-reinforced concrete-filled circular steel tubular stub columns	863-877
Liu, Tao / Yu, Qingliang / Fan, Jianfeng / Peng, Ziqiang / Wang, Erlei	Concrete spherical joint contact stress distribution and overturning moment of swing bridge	1187-1195
Liew, A.	Constrained Force Density Method optimisation for compression-only shell structures	1845-1856
Furtado, André / Rodrigues, Hugo / Arêde, António / Varum, Humberto	Cost-effective analysis of textile-reinforced mortar solutions used to reduce masonry infill walls collapse probability under seismic loads	141-157
Appa Rao, G. / Poluraju, P.	Cyclic behaviour of precast reinforced concrete sandwich slender walls	80-92
Kheyroddin, Ali / Dabiri, Hamed	Cyclic performance of RC beam-column joints with mechanical or forging (GPW) splices; an experimental study	2562-2571
Shin, Dong-Hyeon / Kim, Hyung-Joon	Cyclic response of rectangular RC columns retrofitted by hybrid FRP sheets	697-712
Yazdanian, Mohsen / Ingham, Jason / Kahanek, Christopher / Dizhur, Dmytro	Damage assessment of catwalks following the 2016 Kaikōura earthquake	1977-1990
Tarawneh, Ahmad / Majdalaweyh, Sereen	Design and reliability analysis of FRP-reinforced concrete columns	1580-1588
Matti, Feleb N. / Mashiri, Fidelis R.	Design formulae for predicting the stress concentration factors of concrete-filled T-joints under out-of-plane bending	2073-2095
Ghaffarzadeh, Hosein / Younespour, Amir / Cheng, Shaohong	Design of a tuned mass damper for damped structures using an orthogonal-function-based equivalent linearization method	2605-2616
Harirchian, Ehsan / Lahmer, Tom	Developing a hierarchical type-2 fuzzy logic model to improve rapid evaluation of earthquake hazard safety of existing buildings	1384-1399
Al-Sibahy, Adnan / Mashshay, Safaa	Development of hybrid ECC columns subjected to concentric and eccentric loading	309-320
Yuen, Terry Y. P. / Halder, Rudhra / Chen, Wang-Wen / Zhou, Xiangming / Deb, Trissa / Liu, Yang / Tseng, Yang / Wen, Tzu-Han	DFEM of a post-tensioned precast concrete segmental bridge with unbonded external tendons subjected to prestress changes	1322-1337
Aldhafairi, Faisal / Hassan, Ahmed / Abd-EL-Hafez, L. M. / Abouelezz, A. E. Y.	Different techniques of steel jacketing for retrofitting of different types of concrete beams after elevated temperature exposure	713-725
Salek Faramarzi, Mohammadreza / Taghikhany, Touraj	Direct performance-based seismic design of strongback steel braced systems	482-495
Zingoni, Alphose / Enoma, Nosakhare	Dual-purpose concrete domes: A strategy for the revival of thin concrete shell roofs	2686-2703
Ngo, Tuan T. / Pham, Thong M. / Hao, Hong	Ductile and dry exterior joints using CFRP bolts for moment-resisting frames	668-684
Hashemi, Ashkan / Zarnani, Pouyan / Quenneville, Pierre	Earthquake resistant timber panelised structures with resilient connections	225-234
Yang, Hongliang / Xue, He	Effect of cold working on crack growth rate of environmentally assisted cracking of 316L SS	446-455
Tamaddon, S. / Hosseini, M. / Vasseghi, A.	The effect of curvature angle of curved RC box-girder continuous bridges on their transient response and vertical pounding subjected to near-source earthquakes	1019-1034
Pourfallahi, M. / Nohegoo-Shahvari, A. / Salimizadeh, M.	Effect of direct addition of two different bacteria in concrete as self-healing agent	2646-2660
Jalaeefar, Ali / Zargar, Azam	Effect of infill walls on behavior of reinforced concrete special moment frames under seismic sequences	766-773
Gao, Xiangyu / Li, Yanglong / Li, Jianqin / Xu, Jimin	Effect of steel braces buckling on inelastic torsion and design prevention of steel braced concrete frame structure	1687-1700
Sajed, Mohsen / Tehrani, Payam	Effects of column and superstructure irregularity on the seismic response of four-span RC bridges	1400-1412
Jafarian, Navid / Mostofinejad, Davood / Naderi, Ali	Effects of FRP grids on punching shear behavior of reinforced concrete slabs	2523-2536
Di Sarno, Luigi / Amiri, Saeed / Garakaninezhad, Alireza	Effects of incident angles of earthquake sequences on seismic demands of structures	1244-1251
Zhao, Zhixin / Wang, Wenhua / Shi, Wei / Li, Xin	Effects of second-order hydrodynamics on an ultra-large semi-submersible floating offshore wind turbine	2260-2275
Rezaiee-Pajand, Mohammad / Rajabzadeh-Safaei, Niloofar / Masoodi, Amir R.	An efficient curved beam element for thermo-mechanical nonlinear analysis of functionally graded porous beams	1035-1049
Duan, Kang-Kang / Cao, Shuang-Yin	Emerging RFID technology in structural engineering – A review	2404-2414
Zargarzadeh, Ali / Mojtahedi, Alireza / Mohammadyzadeh, Samira / Hokmabady, Hamid	Employing an improved cross model cross mode algorithm for damage detection of a steel offshore platform frame using experimental data	1589-1600
Yaghmaei-Sabegh, Saman / Jafari-Koucheh, Ebrahim / Ebrahimi-Aghabagher, Mehdi	Estimating the seismic response of nonlinear structures equipped with nonlinear viscous damper subjected to pulse-like ground records	1915-1923
Pachideh, Ghasem / Kafi, Mohammadali / Gholhaki, Majid	Evaluation of cyclic performance of a novel bracing system equipped with a circular energy dissipater	467-481
Shakib, Hamzeh / Zakersalehi, Maedeh / Jahangiri, Vahid / Zamanian, Reza	Evaluation of Plasco Building fire-induced progressive collapse	205-224
Ferreira, Gabriel Soares / Pimentel, Roberto Leal / Barbosa, Flávio de Souza	Evaluation of two crack models for reinforced concrete one-way slabs subjected to bending by means of modal tests	2013-2022
Li, Haitao / Su, Jingwen / Xiong, Zhenhua / Ashraf, Mahmud / Corbi, Ileana / Corbi, Ottavia	Evaluation on the ultimate bearing capacity for laminated bamboo lumber columns under eccentric compression	1572-1579
Akhlaghi, Alireza / Mostofinejad, Davood	Experimental and analytical assessment of different anchorage systems used for CFRP flexurally retrofitted exterior RC beam-column connections	881-893
Abadel, Aref / Abbas, Husain / Alrshoudi, Fahed / Altheeb, Ali / Albidah, Abdulrahman / Almusallam, Tarek	Experimental and analytical investigation of fiber alignment on fracture properties of concrete	2572-2581
Nassani, Dia Eddin	Experimental and analytical study of the mechanical and flexural behavior of hybrid fiber concretes	1746-1755
Huang, Qian / Hamed, Ehab / Gilbert, R. Ian	Experimental and numerical investigation of the creep response of precast concrete sandwich panels	2096-2110
Albu-Hassan, Nuha Hussein / Al-Thairy, Haitham	Experimental and numerical investigation on the behavior of hybrid concrete beams reinforced with GFRP bars after exposure to elevated temperature	537-551
Wang, Guojue / Li, Yingmin / Li, Zhe / Ingham, Jason M.	Experimental and numerical study of precast concrete columns with hybrid bolted splice connections	17-36
Lian, Ming / Guan, Binlin / Cheng, Qianqian / Zhang, Hao / Su, Mingzhou	Experimental and numerical study of seismic performance of high-strength steel fabricated framed-tube structures with replaceable shear links	2714-2732
Zhang, Pu / Liu, Xuan-Yu / Li, Qi-Long / Deng, En-Feng / Gao, Dan-Ying / Zhang, Zhe / Sheikh, Shamim Ahmed	Experimental and theoretical studies on the shear performance of innovative box-shape FRP profile-concrete hybrid beams	2772-2784
Parajuli, Rishi Ram / Furukawa, Aiko / Gautam, Dipendra	Experimental characterization of monumental brick masonry in Nepal	1314-1321
Nguyen, Minh Hai / Hirano, Yuma / Nakajima, Akinori / Fujikura, Shuichi / Niimura, Ryo	Experimental evaluation of the shear capacity of perfobond strips with steel fiber-reinforced mortar in narrow joint structures	1173-1186
Fazeli Kelareh, Mohammadreza / Aghayari, Reza / Tahamouli Roudsari, Mehrzad	An experimental investigation into dispersion of compressive stress in isolated bottle-shaped struts with openings	1857-1869
Ghoroubi, Rahim / Mercimek, Ömer / Özdemir, Anıl / Anil, Özgür	Experimental investigation of damaged square short RC columns with low slenderness retrofitted by CFRP strips under axial load	170-180
Taghipoor, Hossein / Eyvazian, Arameh / Musharavati, Farayi / Sebaey, T. A. / Ghiaskar, Ahmad	Experimental investigation of the three-point bending properties of sandwich beams with polyurethane foam-filled lattice cores	424-432
Qiao, Wentao / Yin, Xiaoxiang / Zhang, Haiying / Wang, Dong	Experimental study of insulated sandwich concrete wall connections under cyclic loading	2000-2012
Song, Xinyu / Huang, Zhen / Shen, Jie / Yao, Yiming	Experimental study on cyclic behavior of hybrid CFRP grids-steel shear walls	496-511
Li, Guoping / Wang, Jiaqi / Shen, Yin / Li, Liang / Chen, Ming	Experimental study on the combined shear and bending behaviour of corbel joints in precast concrete segmental inverted-T caps	2367-2378
Niu, Lihua / Zheng, Shansuo / Li, Lei	Experimental study on the seismic behavior of masonry walls under offshore environment	433-445
Wang, Bo / Wang, Zhengpeng / Uji, Kimitaka	Experimental verification of a novel anchorage method of CFRP grid in mortar	1646-1660
Akbari Hamed, Arash / Basim, Mohammad Charkhtab	Experimental-numerical study on weakened HSS-to-HSS connections using HBS and RBS approaches	1449-1465
Farrokh Ghatte, Hamid	Failure mechanisms and cracking performance of T-shaped SCC beam-column connections at top floor: Test results and FE modeling	1009-1018
Wang, Qiudong / Ji, Bohai / Xia, Junyuan / Fu, Zhongqiu	Fatigue assessment of rib-deck welds in orthotropic steel decks integrating the effect of load dispersal through asphalt surfacing	1701-1712
Zhuang, Meiling / Miao, Changqing	Fatigue reliability assessment for hangers of a special-shaped CFST arch bridge	235-250
Li, Hongmin / Lam, Frank / Qiu, Hongxing	Feasibility of the analytical model for the splice beam with half-lap joints reinforced with different cross-sections and layout of self-tapping screws	120-126
Burton, C. / Visintin, P. / Griffith, M. / Vaculik, J.	Field testing of vintage masonry: Mechanical properties and anchorage strengths	1900-1914
Ibrahim, Mostafa Mohamed / El Aghoury, Ihab Mohamed / Ibrahim, Sherif Abdel-Basset	Finite element investigation on plate buckling coefficients of tapered steel members web plates	2321-2334
Guo, Xiaonong / Zhu, Shaojun / Jiang, Shouchao / Zhang, Chaozhong / Chen, Chen	Fire tests on single-layer aluminum alloy reticulated shells with gusset joints	1137-1152
El-Sayed, Taha A. / Shaheen, Yousry B. I.	Flexural performance of recycled wheat straw ash-based geopolymer RC beams and containing recycled steel fiber	1713-1728
Tayeh, Bassam A. / Abu Maraq, Mohamed A. / Ziara, Mohamed M.	Flexural performance of reinforced concrete beams strengthened with self-compacting concrete jacketing and steel welded wire mesh	2146-2162
Ghandi, Elham / Niari, Shirin Esmaeili	Flexural-torsional buckling of cold-formed steel columns with arbitrary cross-section under eccentric axial load	2122-2134
Chaudhary, Ranjit Kumar / Roy, Tathagata / Matsagar, Vasant	Framework for fragility assessment of reinforced concrete portal frame subjected to elevated temperature	2785-2800
Liu, Qifang / Looi, Daniel Ting-Wee / Hongniao Chen, Helen / Tang, Chen / Su, Ray Kai Leung	Framework to optimise two-dimensional DIC measurements at different orders of accuracy for concrete structures	93-105
Twinkle, C. M. / Pitchaimani, Jeyaraj / Rajamohan, Vasudevan	Free vibration modes of rectangular plate under non-uniform heating: An experimental investigation	1802-1817
Al Rjoub, Yousef S. / Alshatnawi, Jinan A.	Free vibration of functionally-graded porous cracked plates	2392-2403
Türkmen, Ö. S. / Wijte, S. N. M. / Vaculik, J. / De Vries, B. T. / Ingham, J. M.	High-speed pullout behavior of deep-mounted cfrp strips bonded with a flexible adhesive to clay brick masonry	1153-1172
Ganta, Jyothi Kumari / Seshagiri Rao, M. V. / Mousavi, Seyed Sina / Reddy, V. Srinivasa / Bhojaraju, Chandrasekhar	Hybrid steel/glass fiber-reinforced self-consolidating concrete considering packing factor: Mechanical and durability characteristics	956-972
Patil, Shreekant / Reddy, D. Mallikarjuna	Impact damage assessment in carbon fiber reinforced composite using vibration-based new damage index and ultrasonic C-scanning method	638-650
Asad, Mohammad / Dhanasekar, Manicka / Zahra, Tatheer / Thambiratnam, David	Impact mitigation of masonry walls with carbon fibre and Auxetic fibre composite renders – A numerical study	2733-2751
Ramaglia, Giancarlo / Fabbrocino, Francesco / Lignola, Gian Piero / Prota, Andrea	Impact of FRP and FRCM on the ductility of strengthened masonry members	1229-1243
Murali, G. / Abid, Sallal R. / Mugahed Amran, Y. H. / Abdelgader, Hakim S. / Fediuk, Roman / Susrutha, Arikatla / Poonguzhali, K.	Impact performance of novel multi-layered prepacked aggregate fibrous composites under compression and bending	1502-1515
Hasap, Anat / Noraphaiphipaksa, Nitikorn / Kanchanomai, Chaosuan	Influence of malposition on the performance of elastic rail clip: Toe load, stress, and friction	2661-2670
He, Weikun / Jiang, Lizhong / Wei, Biao / Wang, Zhenwei	The influence of pier height on the seismic isolation effectiveness of friction pendulum bearing for Double-Track railway bridges	1870-1884
Yuan, Ye / Zhang, Ni / Liu, Haiqing / Zhao, Zhongwei / Fan, Xiongtao / Zhang, Hongwei	Influence of random pit corrosion on axial stiffness of thin-walled circular tubes	2596-2604
Aydin, Ersin / Ozturk, Baki / Bogdanovic, Aleksandra / Farsangi, Ehsan Noroozinejad	Influence of soil-structure interaction (SSI) on optimal design of passive damping devices	847-862
Kanbir, Zafer / Alhan, Cenk / Özdemir, Gökhan	Influence of superstructure modeling approach on the response prediction of buildings with LRBs considering heating effects	1756-1773
Almitani, Khalid H. / Abdelrahman, Alaa A. / Eltaher, Mohamed A.	Influence of the perforation configuration on dynamic behaviors of multilayered beam structure	1413-1426
Liang, Wenyan / Bonsu, Alex Osei / Lv, Hongqing / Yang, Bin / Liu, Chang / Deng, Jingjing	Intumescent coating thickness effect on the post-heat mechanical properties of composites	2056-2072
Usefvand, Mahdi / Maleki, Ahmad / Alinejad, Babak	Investigate of damage index of coupled steel plate shear walls (C-SPSW) system under seismic loading	614-625
Li, Jinhua / Zhang, Huantao / Chen, Shuisheng	Investigation of axle-span ratio and moving load speed affecting bridge extreme response using a moving load amplitude spectrum method	2633-2645
Yuan, Siqi / Liu, Zhao / Tong, Teng	Investigation of over-nonlocal damage and interface cohesive models for simulating structural behaviors of composite UHPC-NC members	2617-2632
Feng, Zhibin / Gong, Jinxin	Investigation on residual displacements for SDOF systems with various initial viscous damping models	1831-1844
Tafsirojjaman, T. / Fawzia, Sabrina / Thambiratnam, David	Investigation on the behaviour of CFRP strengthened CHS members under monotonic loading through finite element modelling	297-308
Areiza-Hurtado, Mauricio / Aristizabal-Ochoa, J. Dario	Large-deflection analysis of prismatic and tapered beam-columns using the Differential Transform Method	923-932
Erfani, Saeed / Akrami, Vahid / Mohammad-nejad, Arash	Lateral load resisting behavior of steel moment frames with reduced web section (RWS) beams	251-265
Šorf, Marek / Jandera, Michal	Lateral-torsional buckling of slender cross-section stainless steel beams	1466-1478
Manalo, A. C. / Alajarmeh, O. / Cooper, D. / Sorbello, C. D. / Weerakoon, S. Z. / Benmokrane, B.	Manufacturing and structural performance of glass-fiber-reinforced precast-concrete boat ramp planks	37-56
Chen, Jun / Zhao, Chenhui / Ding, Fa-xing / Duan, Quancheng / Cao, Zimei / Xu, Fu / Yang, Cai-qian / Lu, Dagang / Xiang, Ping	Mechanical performance of the grouted lapped double reinforcements anchored in embedded corrugated sleeves	1354-1365
Georgoussis, George K. / Mamou, Anna	Mitigating mass eccentricity effects on the rotational response of setbacks structures: An analytical solution for linear systems	1539-1556
Zhang, Lixian / Michailides, Constantine / Wang, Yapo / Shi, Wei	Moderate water depth effects on the response of a floating wind turbine	1435-1448
Diab, Hesham M. A. / Abdelaleem, Tarek / Rashwan, Mohamed M. M.	Moment redistribution and flexural performance of RC continuous T-beams strengthened with NSM FRP or steel bars	1516-1538
Ghayoumian, Golnaz / Emami, Ali R.	A multi-direction pushover procedure for seismic response assessment of low-to-medium-rise modern reinforced concrete buildings with special dual system having torsional irregularity	1077-1107
Mehar, Kulmani / Panda, Subrata Kumar / Dewangan, Hukum Chand	Multiscale finite element prediction of thermomechanical flexural strength of nanotube-reinforced hybrid smart composite panel bonded with SMA fibre	2300-2310
Mirabi Banadaki, Hosein / Eslami, Abolfazl / Ronagh, Hamid	Near-surface-mounted retrofitting of damaged/undamaged adobe walls using steel bars: Analytical evaluation of experimental results	2111-2121
Toğan, Vedat / Berberoğlu, Neslihan / Başağa, Hasan Basri	New adaptive weight formulations for time-cost optimization	2291-2299
Younis, Abdul-Aziz / Ramadan, Abdullah S. / Wong, Lui Sammy / Nehdi, Moncef L.	New rational test for reinforced-concrete pipe eliminating subjective crack-width criteria	2507-2522
Pérez-Valcárcel, J. / Suárez-Riestra, F. / Muñoz-Vidal, M. / López-César, I. / Freire-Tellado, M. J.	A new reciprocal linkage for expandable emergency structures	2023-2033
Li, Hui / Liu, Yongjian / Zhang, Ning	Non-linear distributions of bond-slip behavior in concrete-filled steel tubes by the acoustic emission technique	2311-2320
Ali, Ahmed H. / Gouda, Ahmed / Mohamed, Hamdy M. / Rabie, Mohamed H. / Benmokrane, Brahim	Nonlinear finite elements modeling and experiments of FRP-reinforced concrete piles under shear loads	106-119
Shaheen, Mohamed A. / Foster, Andrew S. J. / Cunningham, Lee S.	A novel device to improve robustness of end plate beam-column connections	2415-2423
Bharti, Kundan / Kumaraswamidhas, L. A. / Das, R. R.	A novel optimization approach for bonded tubular gap K-joints made of FRP composites	2135-2145
Ahmed, Mizan / Liang, Qing Quan	Numerical analysis of thin-walled round-ended concrete-filled steel tubular short columns including local buckling effects	181-196
Mao, Wen-Jing / Wang, Wen-Da / Xian, Wei	Numerical analysis on fire performance of steel-reinforced concrete-filled steel tubular columns with square cross-section	1-16
Parvari, Ali / Zahrai, Seyed Mehdi / Mirhosseini, S. Mohammad / Zeighami, Ehsanollah	Numerical and experimental study on the behavior of drilled flange steel beam to CFT column connections	726-740
Fikri, Rijalul / Derakhshan, Hossein / Ingham, Jason	Numerical evaluation of a non-ductile RCFMI building subjected to the Canterbury, New Zealand Earthquakes: A case study of the St Elmo Courts building	991-1008
Sediek, Omar A. / Safar, Sherif S. / Hassan, Maha M.	Numerical investigation on shear strength of tapered perfect end web panels	354-368
Sahoo, Prakash Ranjan / Barik, Manoranjan	A numerical investigation on the dynamic response of stiffened plated structures under moving loads	1675-1686
Nyunn, Sandy / Wang, Feiliang / Yang, Jian / Liu, Qing-feng / Azim, Iftikhar / Bhatta, Sanjeev	Numerical studies on the progressive collapse resistance of multi-story RC buildings with and without exterior masonry walls	1050-1059
Hamzeh, Layane / Hassanein, Ahmed / Galal, Khaled	Numerical study on the seismic response of GFRP and steel reinforced masonry shear walls with boundary elements	1946-1964
Rinaldin, Giovanni / Fasan, Marco / Sancin, Ljuba / Amadio, Claudio	On the behaviour of steel CBF for industrial buildings subjected to seismic sequences	2175-2187
Ghasemi, Mahdi / Talaeitaba, Sayed Behzad	On the effect of seismic base isolation on seismic design requirements of RC structures	2244-2259
Gatheeshgar, Perampalam / Poologanathan, Keerthan / Gunalan, Shanmuganathan / Shyha, Islam / Tsavdaridis, Konstantinos Daniel / Corradi, Marco	Optimal design of cold-formed steel lipped channel beams: Combined bending, shear, and web crippling	825-836
Taiyari, F. / Kharghani, M. / Hajihassani, M.	Optimal design of pile wall retaining system during deep excavation using swarm intelligence technique	1991-1999
Kaveh, A. / Javadi, S. M. / Mahdipour Moghanni, R.	Optimal structural control of tall buildings using tuned mass dampers via chaotic optimization algorithm	2704-2713
Li, Jinhua / Zhang, Huantao / Chen, Shuisheng / Zhu, Desen	Optimization and sensitivity of TMD parameters for mitigating bridge maximum vibration response under moving forces	512-520
Duong, Huan Thanh / Phan, Hieu Chi / Le, Tien-Thinh / Duc Bui, Nang	Optimization design of rectangular concrete-filled steel tube short columns with Balancing Composite Motion Optimization and data-driven model	757-765
Alhaddad, Wael / Halabi, Yahia / Meree, Hani / Yu, Zhixiang	Optimum design method for simplified model of outrigger and ladder systems in tall buildings using genetic algorithm	2467-2487
Talatahari, Siamak / Azizi, Mahdi	Optimum design of building structures using Tribe-Interior Search Algorithm	1616-1633
Wang, C. Y.	The optimum elastica catenary cable	878-880
Tao, Tianyou / Wang, Hao / Gao, Yuqi	Parametric analysis on flutter performance of a long-span quadruple-tower suspension bridge	1108-1118
Vendramell Ferreira, Felipe Piana / Martins, Carlos Humberto / De Nardin, Silvana	A parametric study of steel-concrete composite beams with hollow core slabs and concrete topping	276-296
Agarwal, Preeti / Pal, Priyaranjan / Mehta, Pradeep Kumar	Parametric study on skew-curved RC box-girder bridges	380-388
Yang, Haibo	Performance analysis of semi-rigid connections in prefabricated high-rise steel structures	837-846
Bengar, Habib Akbarzadeh / Mousavi, Moein	Performance of an innovative anchorage system for strengthening RC beams in adjacency of columns with FRP laminates	197-204
Mashhadi, Sima / Asadi, Azita / Homaei, Farshad / Tajammolian, Hamed	The performance-based seismic response of special steel MRF: Effects of pulse-like ground motion and foundation safety factor	127-140
Zhao, Hong-Chao / Ye, Yu-Yi / Zeng, Jun-Jie / Zhou, Jie-Kai / Ouyang, Yi	Polyethylene terephthalate fibre-reinforced polymer-confined concrete encased high-strength steel tube hybrid square columns: Axial compression tests	577-588
Raza, Ali / Shah, Syyed Adnan Raheel / ul Haq, Faraz / Arshad, Hunain / Raza, Syed Safdar / Farhan, Muhammad / Waseem, Muhammad	Prediction of axial load-carrying capacity of GFRP-reinforced concrete columns through artificial neural networks	1557-1571
Liu, Haiqing / Xu, Qian / Wang, Qinghe / Zhang, Yuzhuo	Prediction of the elastic modulus of concrete with spontaneous-combustion and rock coal gangue aggregates	774-785
Gao, Jianxiong / Yuan, Yiping	Probabilistic model of fatigue damage accumulation of materials based on the principle of failure probability equivalence	659-667
Homaei, Farshad / Yazdani, Mahdi	The probabilistic seismic assessment of aged concrete arch bridges: The role of soil-structure interaction	894-904
Esfandiari, M. J. / Urgessa, G. S.	Progressive collapse design of reinforced concrete frames using structural optimization and machine learning	1252-1264
Wang, Bo-Wei / Tang, Wen-Zhong / Song, Lu-Kai / Bai, Guang-Chen	PSO-LSSVR: A surrogate modeling approach for probabilistic flutter evaluation of compressor blade	1634-1645
Kala, Zdenek	Quantile-based versus Sobol sensitivity analysis in limit state design	2424-2430
Kaveh, A. / Kamalinejad, M. / Arzani, H.	Quantum evolutionary algorithm hybridized with Enhanced colliding bodies for optimization	1479-1501
Yuan, Wei / Cai, Zhongkui / Guo, Anxin	Rapid determination method of the seismic failure modes of coastal bridge columns in the whole life cycle	943-955
Lai, Zhichao / Yao, Pengyu / Huang, Wenjin / Chen, Baochun / Ying, Zheng	Reactive powder concrete-filled steel tube (RPCFT) members subjected to axial tension: Experimental study and design	933-942
Shi, Dongyan / Ma, Hui / He, Dongze / Gou, Yuxin	A remaining useful life estimation model of drop system based on data driven and Bayesian theory	329-336
Ayash, Nehal M. / Abd-Elrahman, Ahmed M. / Soliman, Abd-Elaziz	Repairing and strengthening of reinforced concrete cantilever slabs using Glass Fiber–Reinforced Polymer (GFRP) wraps	2488-2506
Bahrebar, Milad / Lim, James B. P. / Clifton, George Charles / Zirakian, Tadeh / Shahmohammadi, Amir / Hajsadeghi, Mohammad	Response assessment and prediction of low yield point steel plate shear walls with curved corrugated web plates and reduced beam sections	1729-1745
Haddad, Rami H. / Yaghmour, Emad M.	Retrofitting Heat-Damaged concrete beams using different profiles of side NSM CFRP strips	2232-2243
Thai, Huu-Tai / Ngo, Tuan / Uy, Brian	A review on modular construction for high-rise buildings	1265-1290
Chaves, Estefanía A. / Filippoupolitis, Marios / Mendes, Nuno / Lourenço, Paulo B.	Safety assessment of the South Oculus of Canterbury Cathedral	1427-1434
Hassan, Maha M. / Ramadan, Hazem M. / Abdel-Mooty, Mohamed / Mourad, Sherif A.	Seismic behavior of braced frames with different connection details to concrete filled tube columns	2379-2391
Liu, Yashuang / Ma, Hua / Li, Zhenbao / Wang, Wenjing	Seismic behaviour of full-scale prefabricated RC beam–CFST column joints connected by reinforcement coupling sleeves	2760-2771
Garivani, Sadegh / Askariani, Seyed Saeed / Aghakouchak, Ali Akbar	Seismic design of structures with yielding dampers based on drift demands	1885-1899
Yu, Yujie / Man, Mengke / Zhang, Chao / Ding, Faxing	Seismic performance and working mechanism of innovate bottom-flange-bolted type through-diaphragm connections	1601-1615
Shahsahebi, Amir / Waezi, Zakariya / Hashemi, M. Javad	Seismic performance assessment of multi-story RC buildings with soft-story collapse mechanism equipped with gapped inclined bracing (GIB)	2448-2466
Zhou, Zhongyi / Wang, Tao / Hui, Cun / Li, Jianhua	Seismic performance evaluation of assembled GCFST column-section steel beam frames with geopolymer concrete walls	2537-2548
Pang, Yutao / Cai, Li / Zhong, Jian	Seismic performance evaluation of fiber-reinforced concrete bridges under near-fault and far-field ground motions	1366-1383
Jafarieh, Amir Hossein / Ghannad, Mohammad Ali	Seismic performance of nonlinear soil-structure systems located on soft soil considering foundation uplifting and soil yielding	973-982
Elci, Hasan	Seismic strengthening of improperly repaired reinforced concrete columns using CFRP confinement	266-275
Kimura, Toshiaki / Ohsaki, Makoto / Fujita, Shinnosuke / Michiels, Tim / Adriaenssens, Sigrid	Shape optimization of no-tension arches subjected to in-plane loading	158-169
Naderpour, Hosein / Haji, Mohammad / Mirrashid, Masoomeh	Shear capacity estimation of FRP-reinforced concrete beams using computational intelligence	321-328
Zhao, Wei / Lu, Senqiang / Jing, Xiuying	Shear performance of high-strength bolt connector considering different pad and bolt hole	1291-1300
Khalaf, Mohammed Riyadh / Al-Ahmed, Ali Hussein Ali	Shear strength of reinforced concrete deep beams with large openings strengthened by external prestressed strands	1060-1076
Ye, Jihong / Chen, Wenwen	Simplified calculation of fire resistant temperature for cold-formed steel load-bearing composite walls	1661-1674
Yazdani, Abbas / Arab, Hamed Ghohani / Rashki, Mohsen	Simplified spectral stochastic finite element formulations for uncertainty quantification of engineering structures	1924-1945
Carvalho, José P. G. / Lemonge, Afonso C. C. / Hallak, Patricia H. / Vargas, Dênis E. C.	Simultaneous sizing, shape, and layout optimization and automatic member grouping of dome structures	2188-2202
Singh, Surya Dev / Sahoo, Rosalin	Static and free vibration analysis of functionally graded CNT reinforced composite plates using trigonometric shear deformation theory	685-696
Safari, Pouria / Broujerdian, Vahid	Strategies to increase the survivability of steel connections in fire	2335-2354
Yang, Jia-qi / Smith, Scott T. / Wu, Yu-Fei / Feng, Peng	Strengthening single-bolt timber joints with externally bonded CFRP composites	2671-2685
NadimiShahraki, Kourosh / Reisi, Mohammad	Stress-strain based method for analysis and design of FRP wrapped reinforced concrete columns	1818-1830
Quinn, Gregory	Structural analysis for the pneumatic erection of elastic gridshells	2276-2290
Huang, Minshui / Li, Xifan / Lei, Yongzhi / Gu, Jianfeng	Structural damage identification based on modal frequency strain energy assurance criterion and flexibility using enhanced Moth-Flame optimization	1119-1136
Gupta, Krishanu / Bhattacharjee, Biplab / Kumar Gupta, Sonu / Chakraborti, Prasun	Study of natural frequencies of natural rubber cored novel sandwich structure without tip mass	651-658
Tafsirojjaman, T. / Fawzia, Sabrina / Thambiratnam, David P. / Zhao, Xiao-Ling	Study on the cyclic bending behaviour of CFRP strengthened full-scale CHS members	741-756
He, Liusheng / Khadka, Binod	Study on the extended steel plate connection for steel slit shear walls	816-824
Xin, Yajun / Wu, Junqi / Wu, Qingbo / Cui, Weilong / Zhang, Shilian / Cheng, Shuliang	Study on the sickle anchoring joint in external prestressing strengthening of portal frame	552-561
Moutassem, Fayez / Miqdadi, Issam	Sustainability-model approach for chloride permeability based on concrete mixture	983-990
Huang, Xu-Hao / Yang, Jian / Bai, Li / Wang, Xing-er / Ren, Xin	Theoretical solutions for auxetic laminated beam subjected to a sudden load	57-68
Peng, Liu / Xiaoyong, Luo / Ying, Chen / Zhiwu, Yu / Dayou, Yu	Thermodynamic and acoustic behaviors of prefabricated composite wall panel	1301-1313
Haque Chaudhuri, Chaidul / Chanda, Diptesh / Saha, Rajib / Haldar, Sumanta	Three-dimensional numerical analysis on seismic behavior of soil-piled raft-structure system	905-922
Jia, Hong-Yu / Yue, Wei-Qin / Zheng, Shi-Xiong / Gou, Hong-Ye / Zhao, Can-Hui / You, Gang	Time-dependent pounding probability analysis between adjacent decks of bridges under non-stationary stochastic seismic excitations	2355-2366
Han, Lu / Wang, Jingxiong / Li, Hongjing / Sun, Guangjun	A time-domain spectral element method with C1 continuity for static and dynamic analysis of frame structures	604-613
Deifalla, A.	Torsion design of lightweight concrete beams without or with fibers: A comparative study and a refined cracking torque formula	786-802
Fathizadeh, S. F. / Dehghani, S. / Yang, T. Y. / Farsangi, E. Noroozinejad / Vosoughi, A. R. / Hajirasouliha, I. / Takewaki, I. / Málaga-Chuquitaype, C. / Varum, H.	Trade-off Pareto optimum design of an innovative curved damper truss moment frame considering structural and non-structural objectives	1338-1353
Cavdar, Esengul / Özdemir, Gökhan	Using maximum direction of a ground motion in a code-compliant analysis of seismically isolated structures	2163-2173
Asadi-Ghoozhdi, Hamid / Attarnejad, Reza	A Winkler-based model for inelastic response of soil–structure systems with embedded foundation considering kinematic and inertial interaction effects	589-603

Über diese
Datenseite
IssueID
37539
Veröffentlicht am:
11.09.2020
Geändert am:
09.05.2022

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Structures - Dezember 2020

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Structures - Dezember 2020

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.