Structures - October 2020

Published:	October 2020

Articles in this Issue

Author(s)	Title	Page(s)
Phan, Duc-Huynh	Aeroelastic control of bridge using active control surfaces: Analytical and experiment study	2309-2318
Ren, Chong / Zhang, Peng / Yan, Shen / Dai, Liusi	Analysis and design of cold-formed steel storage rack uprights under localised fires	2082-2095
Phan, Dao Hoang Hiep / Patel, Vipulkumar Ishvarbhai / Abadi, Haider Al / Thai, Huu-Tai	Analysis and design of eccentrically compressed ultra-high-strength slender CFST circular columns	2481-2499
Sadiq, Muhammad / Khaliq, Wasim / Ilyas, Muhammad / Khushnood, Rao Arsalan / Khan, Shaukat Ali / Rong, Pan	Analysis of full-scale aircraft impact to reinforced concrete and steel plate reinforced concrete multiple barriers protecting nuclear power plants	732-746
Tsiavos, Anastasios / Haladij, Peter / Sextos, Anastasios / Alexander, Nicholas A.	Analytical investigation of the effect of a deformable sliding layer on the dynamic response of seismically isolated structures	2426-2436
Tabeshpour, Mohammad Reza / Noorifard, Azadeh	Analytical investigation of torsional mode in symmetric and asymmetric systems with mass or stiffness eccentricity	1433-1445
El-Zohairy, Ayman / Alsharari, Fahad / Salim, Hani	Analytical model and parametric study for externally post-tensioned reinforced concrete-steel composite beams	411-423
Singhal, Shubham / Chourasia, Ajay / Parashar, Jalaj	Anchorage behaviour of headed bars as connection system for precast reinforced concrete structural components	1405-1418
Ruiz-García, Jorge / Ramos-Cruz, José M.	Assessment of permanent drift demands in steel moment-resisting steel buildings due to recorded near-fault forward directivity earthquake ground motions and velocity pulse models	1260-1273
Yazdani, Mahdi / Azimi, Peyman	Assessment of railway plain concrete arch bridges subjected to high-speed trains	174-193
Di Benedetto, S. / Latour, M. / Rizzano, G.	Assessment of the stiffness of 3D cut welded connections with CHS columns and through I-BEAMS	247-258
Hassanein, M. F. / Elkawas, A. A. / Shao, Yong-Bo	Assessment of the suitability of eurocode design model for corrugated web girders with slender flanges	1551-1569
Khaloo, Alireza / Tabatabaeian, Mojtaba / Khaloo, Hooman	The axial and lateral behavior of low strength concrete confined by GFRP wraps: An experimental investigation	747-766
Wang, Weiwei / Lyu, Xuetao / Zhang, Yuzhuo / Yu, Yang / Zhang, Tong	Axial compression performance of thin-walled T-shaped concrete filled steel tubular columns under constant high temperature: Experimental and numerical study	525-541
Li, Jie / Chen, Zhongfan / Chen, Wenwen	Axial load-bearing capacities of pre-cast self-insulation walls made by foam concrete	1951-1961
Abdulla, Nwzad Abduljabar	Axial strength of short concrete-filled plastic tubes	1786-1800
El-Kareim, Ata / Arafa, Ahmed / Hassanin, Amal / Atef, Mohamed / Saber, Ahmed	Behavior and strength of reinforced concrete flanged deep beams with web openings	506-524
Tziavos, Nikolaos I. / Gkantou, Michaela / Theofanous, Marios / Dirar, Samir / Baniotopoulos, Charalampos	Behaviour of grout-filled double-skin tubular steel stub-columns: Numerical modelling and design considerations	1623-1636
Kaveh, A. / Khanzadi, M. / Moghaddam, M. Rastegar	Billiards-inspired optimization algorithm; a new meta-heuristic method	1722-1739
Alabduljabbar, Hisham / West, Jeffrey	Bond behavior of cleaned corroded rebar repaired by partial depth repair	813-823
Albidah, Abdulrahman / Altheeb, Ali / Alrshoudi, Fahed / Abadel, Aref / Abbas, Husain / Al-Salloum, Yousef	Bond performance of GFRP and steel rebars embedded in metakaolin based geopolymer concrete	1582-1593
Ahmad, Mohammad Suhaib / Bhargava, Pradeep	Bond Slip Study Between Concrete and Steel Interface Using Splice Beam Specimen Exposed to Elevated Temperatures	1752-1762
Bhasker, Rohan / Menon, Arun	Characterization of ground motion intensity for the seismic fragility assessment of plan-irregular RC buildings	1763-1776
Tang, Yi-Qun / Du, Er-Feng / Wang, Jing-Quan / Qi, Jia-Nan	A co-rotational curved beam element for geometrically nonlinear analysis of framed structures	1202-1208
Mohammed, Azad A. / Mohammed, Othman K.	Composite concrete – Unregularized timber section for flat roof construction	1324-1334
Alhaddad, Wael / Halabi, Yahia / Xu, Hu / Lei, Honggang	A comprehensive introduction to outrigger and belt-truss system in skyscrapers	989-998
Cao, Yan / Fan, Qingming / Mahmoudi Azar, Sadaf / Alyousef, Rayed / Yousif, Salim T. / Wakil, Karzan / Jermsittiparsert, Kittisak / Ho, Lanh Si / Alabduljabbar, Hisham / Alaskar, Abdulaziz	Computational parameter identification of strongest influence on the shear resistance of reinforced concrete beams by fiber reinforcement polymer	118-127
Al-Rousan, Rajai Z. / AL-Tahat, Mohammad F.	Consequence of anchoring holes technique on the bond behavior between CFRP composites and heat-damaged concrete	1903-1918
Uddin, Md. Alhaz / Alzara, Majed Abdulrahman / Mohammad, Noor / Yosri, Ahmed	Convergence studies of finite element model for analysis of steel-concrete composite beam using a higher-order beam theory	2025-2033
Liu, Peng / Zheng, Zhihui / Yu, Zhiwu	Cooperative work of longitudinal slab ballast-less track prestressed concrete simply supported box girder under concrete creep and a temperature gradient	559-569
Almassri, Belal / Halahla, Abdulsamee M.	Corroded RC beam repaired in flexure using NSM CFRP rod and an external steel plate	343-351
Xue, Songling / Shen, Ruili / Chen, Wei / Shen, Lilai	The corrosion-fatigue measurement test of the Zn-Al alloy coated steel wire	1195-1201
Valizadeh, Hadi / Veladi, Hedayat / Farahmand Azar, Bahman / Sheidaii, Mohammad Reza	The cyclic behavior of Butterfly-shaped Link Steel Plate Shear Walls with and without Buckling-restrainers	607-625
Haghi, Nakisa / Epackachi, Siamak / Kazemi, Mohammad Taghi	Cyclic performance of composite shear walls with boundary elements	102-117
Gorgin, Rahim	Damage identification technique based on mode shape analysis of beam structures	2300-2308
Orlowski, Kristopher / Kennedy, David	Design curves for stiffened engineered timber wall systems: A verified analytical approach	1670-1681
Amran, Y. H. Mugahed / El-Zeadani, Mohamed / Lee, Yeong Huei / Yong Lee, Yee / Murali, G. / Feduik, Roman	Design innovation, efficiency and applications of structural insulated panels: A review	1358-1379
Bessini, J. / Shepherd, P. / Monleón, S. / Lázaro, C.	Design of bending-active tied arches by using a multi-objective optimization method	2319-2328
Yousefi, Amir M. / Samali, Bijan	Design of cold-formed ferritic stainless steel unlipped channels with offset web openings and unfastened flanges subject to web bearing failure under one-flange load scenarios	194-211
Elbana, Abdalla / Talha Junaid, M.	Determination of flexural capacity for GFRP-reinforced concrete beams retrofitted using external CFRP sheet	1384-1395
Ahmad, Subhan / Bhargava, Pradeep / Chourasia, Ajay	Direct shear failure in concrete joints exposed to elevated temperatures	1851-1859
Gong, Jun / Zhi, Xudong	Earthquake failure mode and collapse fragility of a 1000 kV outgoing line frame considering interactions in the tower line system	626-638
Dok, Gokhan / Çağlar, Naci / Ilki, Alper / Yilmaz, Cemal	Effect of impact loading on residual flexural capacity of high-strength reinforced concrete beams	2466-2480
Anike, Emmanuel Ejiofor / Saidani, Messaoud / Olubanwo, Adegoke Omotayo / Tyrer, Mark / Ganjian, Eshmaiel	Effect of mix design methods on the mechanical properties of steel fibre-reinforced concrete prepared with recycled aggregates from precast waste	664-672
Navaratnam, Satheeskumar / Humphreys, Mitchell / Mendis, Priyan / Nguyen, Kate T. Q. / Zhang, Kevin	Effect of roof to wall connection stiffness variations on the load sharing and hold-down forces of Australian timber-framed houses	141-150
Valizadeh, Afsaneh / Hamidi, Fatemeh / Aslani, Farhad / Shaikh, Faiz Uddin Ahmed	The effect of specimen geometry on the compressive and tensile strengths of self-compacting rubberised concrete containing waste rubber granules	1646-1659
Pathak, Shivang / Khennane, Amar / Watt, Simon / Al-deen, Safat	Effectiveness of physics-based collapse criteria in seismic risk assessment of code-conforming low-rise RC framed structures	440-461
Guo, Quanquan / Zhang, Peiyao / Fu, Yiqing / Ke, Fei	Effects of out-of-plane eccentric axial compression on in-plane hysteretic behavior of SC walls	1570-1581
Sharkawi, Aladdin / Taman, Mohamed / Afefy, Hamdy M. / Hegazy, Yasmeen	Efficiency of geopolymer vs. high-strength grout as repairing material for reinforced cementitious elements	330-342
Wen, Qing-Jie / Yue, Zi-Xiang	Elastic buckling property of the upper chords in aluminum half-through truss bridges	1919-1929
Safari Tarbozagh, Alireza / Rezaifar, Omid / Gholhaki, Majid	Electromagnetism in taking concrete behavior on demand	1057-1065
Nabi, Junaid / Abdul, Rahim A.	Employing B-Spline approach in parametric assessment of catenary shaped fabric-formed concrete beams	474-486
Panian, René / Yazdani, Mahdi	Estimation of the service load capacity of plain concrete arch bridges using a novel approach: Stress intensity factor	1521-1534
Issa, Usama H. / Mosaad, Salah A. A. / Hassan, M. Salah	Evaluation and selection of construction projects based on risk analysis	361-370
Olalusi, Oladimeji B. / Spyridis, Panagiotis / Strauss, Alfred	Evaluation of design concepts for post-installed punching shear retrofitting	1710-1721
Dehghani, Ayoub / Mozafari, Ali Reza / Aslani, Farhad	Evaluation of the efficacy of using engineered cementitious composites in RC beam-column joints	151-162
Jędrzejewska, Agnieszka / Kanavaris, Fragkoulis / Zych, Mariusz / Schlicke, Dirk / Azenha, Miguel	Experiences on early age cracking of wall-on-slab concrete structures	2520-2549
Nasery, Mohammad Manzoor / Ağacakoca, Elif / Yaman, Zeynep	Experimental and numerical analysis of impactor geometric shape effects on steel beams under impact loading	1118-1138
Yang, Jun / Guo, Tong / Chai, Shun	Experimental and numerical investigation on seismic behaviours of beam-column joints of precast prestressed concrete frame under given corrosion levels	1209-1221
Wang, Xiaoming / Yang, Wei / Zhang, Xinmin / Zhu, Peng	Experimental and numerical study on a novel cable anchorage system to improve the maintainability of suspension bridges	2126-2136
Minaei, A. / Daneshjoo, F. / Goicolea, José M.	Experimental and numerical study on cable breakage equivalent force in cable-stayed structures consisting of low-relaxation seven-wire steel strands	595-606
Tartaglia, Roberto / D'Aniello, Mario / Zimbru, Mariana	Experimental and numerical study on the T-Stub behaviour with preloaded bolts under large deformations	2137-2155
Wang, Wen-Da / Xian, Wei / Hou, Chao / Shi, Yan-Li	Experimental investigation and FE modelling of the flexural performance of square and rectangular SRCFST members	2411-2425
Abed, Farid H. / Megahed, Mai	Experimental investigation of buckling response of pretwisted structural steel columns	2232-2244
Shabani Attar, Hamed / Esfahani, M. Reza / Ramezani, Ahmadreza	Experimental investigation of flexural and shear strengthening of RC beams using fiber-reinforced self-consolidating concrete jackets	46-53
Augusthus-Nelson, L. / Swift, G.	Experimental investigation of the residual behaviour of damaged masonry arch structures	2500-2512
Wang, Fa-Cheng / Zhao, Hua-Yang	Experimental investigation on blast furnace slag aggregate concrete filled double skin tubular (CFDST) stub columns under sustained loading	352-360
Liu, Ruyan / Li, Hui / Jiang, Qinghui / Meng, Xiaoyu	Experimental investigation on flexural properties of directional steel fiber reinforced rubberized concrete	1660-1669
Wang, Bo / Wang, Zhengpeng / Uji, Kimitaka / Zhang, Junlei / Guo, Rui	Experimental investigation on shear behavior of RC beams strengthened by CFRP grids and PCM	1994-2010
Taheri, Ali / Tasnimi, Abass Ali / Moghadam, Abdolreza Sarvghad	Experimental investigation on the seismic behavior and damage states of reinforced high strength concrete columns	163-173
Yu, Sujian / Wu, Chenglong / Zhou, Fei / Wang, Pengfei / Zhao, Kaichang / Liu, Jiming	Experimental study and numerical simulation of a new prefabricated SRC column to steel beam composite joint	999-1010
Emamyari, Alireza / Sheidaii, Mohammad Reza / Kookalanifar, Amir / Showkati, Hossein / Akbarzadeh, Neda	Experimental study on cyclic behavior of stiffened perforated steel shear panels	2400-2410
Dong, Bingqing / Pan, Jinlong / Cai, Jingming / Zeng, Hao	Experimental study on local compressive behaviour of ECC ring beam connections	2069-2081
Sarvari, Saeed / Esfahani, M. Reza	An experimental study on post-punching behavior of flat slabs	894-902
Wang, Wanqian / Wang, Jingfeng / Yang, T. Y. / Guo, Lei / Song, Huihui	Experimental testing and analytical modeling of CFS shear walls filled with LPM	917-933
Islam, Kamrul / Billah, AHM Muntasir / Chowdhury, Md. Mominul Islam / Ahmed, Khondaker Sakil	Exploratory study on bond behavior of plain and sand coated stainless steel rebars in concrete	2365-2378
Gao, Danying / Gu, Zhiqiang / Zhu, Haitang / Huang, Yunchao	Fatigue behavior assessment for steel fiber reinforced concrete beams through experiment and Fatigue Prediction Model	1105-1117
Haido, James H.	Flexural behavior of basalt fiber reinforced concrete beams: Finite element simulation with new constitutive relationships	1876-1889
Inaam, Qazi / Upadhyay, Akhil	Flexural behaviour of steel I-girder having corrugated webs and slender flanges	12-21
Chen, Jin-Yang / Wang, Fa-Cheng / Han, Lin-Hai / Mu, Ting-Min	Flexural performance of concrete-encased CFST box members	2034-2047
Hu, Yuqing / Meloni, M. / Cheng, Zhao / Wang, Jingquan / Xiu, Hongliang	Flexural performance of steel-UHPC composite beams with shear pockets	570-582
Kar, Swapnasarit / Biswal, K. C.	FRP shear contribution prediction for U-wrapped RC T-beams using a soft computing tool	1093-1104
Naresh, K. / Shankar, K. / Velmurugan, R. / Gupta, N. K.	High strain rate studies for different laminate configurations of bi-directional glass/epoxy and carbon/epoxy composites using DIC	2451-2465
Onat, Onur	Impact of mechanical properties of historical masonry bridges on fundamental vibration frequency	1011-1028
Mortazavi, Seyed Javad / Mansouri, Iman / Awoyera, Paul O. / Naser, M. Z.	Implementation of new elements and material models in OpenSees software to account for post-earthquacke fire damage	1777-1785
Meng, Bao / Hao, Jiping / Zhong, Weihui / Tan, Zheng / Duan, Shichao	Improving collapse-resistance performance of steel frame with openings in beam web	2156-2169
Nikkhoo, Ali / Karegar, Hossein / Mohammadi, Reza Karami / Hejazi, Farzad	Improving the performance of the autoregressive method in modal identification of output-only systems using the empirical mode decomposition	1165-1173
Basit, S. / Maki, T. / Mutsuyoshi, H. / Ishihara, Y. / Tajima, H.	Influence of reinforcement arrangement details on mechanical behavior of precast concrete barrier with loop connection	1682-1692
Gandelli, Emanuele / De Domenico, Dario / Dubini, Paolo / Besio, Matteo / Bruschi, Eleonora / Quaglini, Virginio	Influence of the breakaway friction on the seismic response of buildings isolated with curved surface sliders: Parametric study and design recommendations	788-812
Askariani, Seyed Saeed / Garivani, Sadegh	Introducing and numerical study of a new brace-type slit damper	702-717
Radkia, Sahar / Rahnavard, Rohola / Tuwair, Hesham / Abbas Gandomkar, Farhad / Napolitano, Rebecca	Investigating the effects of seismic isolators on steel asymmetric structures considering soil-structure interaction	1029-1040
Kumbhar, Onkar G. / Kumar, Ratnesh / Farsangi, Ehsan Noroozinejad	Investigating the efficiency of DDBD approaches for RC buildings	1501-1520
Paslar, Nima / Farzampour, Alireza / Hatami, Farzad	Investigation of the infill plate boundary condition effects on the overall performance of the steel plate shear walls with circular openings	824-836
Di, Jin / Han, Bin / Qin, Fengjiang	Investigation of U-bar joints between precast bridge decks loaded in combined bending and shear	37-45
Lee, Adam D. / Shepherd, Paul / Evernden, Mark C.	Large deflections in thin rectangular plates subjected to uniform load: Pitfalls in the application of analytical methods	1419-1432
Rossi, Alexandre / Nicoletti, Renato Silva / de Souza, Alex Sander Clemente / Martins, Carlos Humberto	Lateral distortional buckling in steel-concrete composite beams: A review	1299-1312
Asadi, Payam / Nikfar, Davood / Hajirasouliha, Iman	Life-cycle cost based design of bridge lead-rubber isolators in seismic regions	383-395
Drewniok, Michał P. / Campbell, Jamie / Orr, John	The Lightest Beam Method – A methodology to find ultimate steel savings and reduce embodied carbon in steel framed buildings	687-701
Darzi, Siavash / Karampour, Hassan / Bailleres, Henri / Gilbert, Benoit P. / Fernando, Dilum	Load bearing sandwich timber walls with plywood faces and bamboo core	2437-2450
Mousapoor, Esmaeil / Ghiasi, Vahed / Madandoust, Rahmat	Macro modeling of slab-column connections in progressive collapse with post-punching effect	837-852
Alogdianakis, Filippos / Charmpis, Dimos C. / Balafas, Ioannis	Macroscopic effect of distance from seacoast on bridge deterioration – Statistical data assessment of structural condition recordings	319-329
Zhou, Wangbao / Nie, Leixin / Jiang, Lizhong / Feng, Yulin / Tan, Zhihua / Chai, Xilin	Mapping relation between pier settlement and rail deformation of unit slab track system	1066-1074
Cavaleri, Liborio / Ciraolo, Giuseppe / Ferrotto, Marco Filippo / La Loggia, Goffredo / Lo Re, Carlo / Manno, Giorgio	Masonry structures subjected to tsunami loads: Modeling issues and application to a case study	2192-2207
El-Sokkary, Hossam / Galal, Khaled	Material Quantities of Reinforced Masonry versus Reinforced Concrete Shear Walls	767-779
Xin, Haohui / Mosallam, Ayman / Correia, José A. F. O. / Liu, Yuqing / He, Jun / Sun, Yun	Material-structure integrated design optimization of GFRP bridge deck on steel girder	1222-1230
Xu, Fan / Wang, Sheliang / Li, Tao / Liu, Bo / Li, Binbin / Zhou, Yuan	The mechanical properties of tailing recycled aggregate concrete and its resistance to the coupled deterioration of sulfate attack and wetting–drying cycles	2208-2216
Rajaei, Majid / Elahi, S. Hossein / Asefi, Ashkan	Modal properties of closed-cell zinc foam	1380-1383
Ramadan, Abdullah / Shehata, Ahmed / Younis, Abdul-Aziz / Wong, Lui Sammy / Nehdi, Moncef L.	Modeling structural behavior of precast concrete pipe with single elliptical steel cage reinforcement	903-916
Szopa, Krystian / Iwaniec, Marek / Iwaniec, Joanna	Modelling and identification of bolted truss structure with the use of design of experiment approach	462-473
Khan, Nasar Ahmad / Srivastava, Gaurav	Models for strength and stiffness of steel plate shear walls with openings	2096-2113
Kazeminezhad, Ehsan / Kazemi, Mohammad Taghi / Mirhosseini, S. Mohammad	Modified procedure of lead rubber isolator design used in the reinforced concrete building	2245-2273
Del Rey Castillo, E. / Ingham, J.	Monotonic behaviour of post-installed mechanical anchors installed in prestressed concrete hollow-core floor units	1801-1808
Sharma, Nishant / Dasgupta, Kaustubh / Dey, Arindam	Natural period of reinforced concrete building frames on pile foundation considering seismic soil-structure interaction effects	1594-1612
Hosseinpour, Mahmoud / Sharifi, Yasser / Sharifi, Hojjat	Neural network application for distortional buckling capacity assessment of castellated steel beams	1174-1183
Zhao, Deng / Wang, Xiaosun	New method to evaluate the rate of convergence for two-dimensional system involving friction damper	2513-2519
Marques, Marília G. / Liberati, Elyson A. P. / Pimentel, Mário J. / de Souza, Rafael A. / Trautwein, Leandro M.	Nonlinear finite element analysis (NLFEA) of reinforced concrete flat slabs with holes	1-11
Al-Rousan, Rajai Z. / Alhassan, Mohammad / Al-wadi, Razan	Nonlinear finite element analysis of full-scale concrete bridge deck slabs reinforced with FRP bars	1820-1831
He, Jun / Li, Xiang / Li, Chuanxi / Correia, José A. F. O. / Xin, Haohui / Zhou, Man	A novel asynchronous-pouring-construction technology for prestressed concrete box girder bridges with corrugated steel webs	1940-1950
Shaheen, Mohamed A. / Foster, Andrew S. J. / Cunningham, Lee S. / Afshan, Sheida	A numerical investigation into stripping failure of bolt assemblies at elevated temperatures	1458-1466
Kalibhat, Madhusudan G. / Upadhyay, Akhil	Numerical modeling of continuous steel concrete composite girders considering cracking of concrete	1313-1323
Simão, Pedro Dias / Dias da Silva, Vitor	On the propensity of shear deformable columns to buckle under a tensile axial load	1832-1840
Nabid, Neda / Hajirasouliha, Iman / Escolano Margarit, David / Petkovski, Mihail	Optimum energy based seismic design of friction dampers in RC structures	2550-2562
Jing, John / Clifton, G. Charles / Roy, Krishanu / Lim, James B. P.	Performance of a novel slider device in multi-storey cold-formed steel modular buildings under seismic loading	212-246
Ghith, Ahmed / Ezzeldin, Mohamed / Tait, Michael / El-Dakhakhni, Wael	Performance of battery rack auxiliary power systems under FEMA 461 quasi-static seismic loading protocol	1041-1056
Murthy, A. Ramachandra / Pukazhendhi, DM. / Vishnuvardhan, S. / Saravanan, M. / Gandhi, P.	Performance of concrete beams reinforced with GFRP bars under monotonic loading	1274-1288
Al-Abdwais, Ahmed H. / Al-Mahaidi, Riadh S.	Performance of reinforced concrete beams strengthened with NSM CFRP composites for flexure using cement-based adhesives	1446-1457
Nematzadeh, Mahdi / Karimi, Amirhossein / Gholampour, Aliakbar	Pre- and post-heating behavior of concrete-filled steel tube stub columns containing steel fiber and tire rubber	2346-2364
Huang, Caigui / Huang, Surong	Predicting capacity model and seismic fragility estimation for RC bridge based on artificial neural network	1930-1939
Ho, Nhat-Minh / Doh, Jeung-Hwan / Fragomeni, Sam / Yang, Jiacheng / Yan, Kai / Guerrieri, Maurice	Prediction of axial load capacity of concrete walls with openings restrained on three sides	1860-1875
Thakur, A. / Senthil, K. / Singh, A. P. / Iqbal, M. A.	Prediction of dynamic amplification factor on clay brick masonry assemblage	673-686
Yuan, Ye / Liu, Haiqing / Zhao, Zhongwei / Yan, Renzhang	Probability distribution model of the bending capacity for WHSJ with multiple randomly pitting corrosion	1740-1751
Moslemi, Abdollah / Navayi neya, Bahram / Davoodi, Mohammad Reza / Dehestani, Mehdi	Proposing and finite element analysis of a new composite profiled sheet deck	70-85
Jiang, Linwei / Zhong, Jian / Yuan, Wancheng	The pulse effect on the isolation device optimization of simply supported bridges in near-fault regions	853-867
Setiawan, Andri / Vollum, Robert L. / Macorini, Lorenzo / Izzuddin, Bassam A.	Punching of RC slabs without transverse reinforcement supported on elongated columns	2048-2068
Veladi, Hedayat / Farahmand Azar, Bahman / Rahimi Gendeshmin, Saeed	Quantifying higher mode effects in rocking systems considering shear-flexural behavior	542-558
Zareie, Shahin / Issa, Anas Salem / Seethaler, Rudolf J. / Zabihollah, Abolghassem	Recent advances in the applications of shape memory alloys in civil infrastructures: A review	1535-1550
Stephen, Iyinoluwa / Hughes, Eric / Das, Sreekanta	Reinforced concrete beams strengthened with basalt fibre fabric – A parametric study	309-318
Llanes-Tizoc, Mario D. / Reyes-Salazar, Alfredo / Ruiz, Sonia E. / Valenzuela-Beltrán, Federico / Bojórquez, Edén / Chávez, Robespierre	Reliability analysis of steel buildings considering the flexibility of the connections of the GFs	2170-2181
Shirgir, Sina / Farahmand Azar, Bahman / Hadidi, Ali	Reliability-based simplification of Bouc-Wen model and parameter identification using a new hybrid algorithm	297-308
Tan, Zheng / Zhong, Wei-hui / Tian, Li-min / Meng, Bao / Song, Xiao-yan / Qiu, Shuai-zi	Research on the collapse-resistant performance of composite beam–column substructures using multi-scale models	86-101
Daneshvar, Kambiz / Moradi, Mohammad Javad / Amooie, Morteza / Chen, Siyu / Mahdavi, Golsa / Hariri-Ardebili, Mohammad Amin	Response of low-percentage FRC slabs under impact loading: Experimental, numerical, and soft computing methods	975-988
Wang, J. H. / Sun, Y. P. / Takeuchi, T. / Koyama, T.	Seismic behavior of circular fly ash concrete columns reinforced with low-bond high-strength steel rebar	1335-1357
Zheng, Lianqiong / Zheng, Yuting	Seismic behaviour of concrete-filled steel tubular column and precast shear wall connections	934-949
Usefi, Nima / Ronagh, Hamid	Seismic characteristics of hybrid cold-formed steel wall panels	718-731
Khanal, Bharat / Chaulagain, Hemchandra	Seismic elastic performance of L-shaped building frames through plan irregularities	22-36
Xu, Tengfei / Zhang, Ziyang / Li, Yaping / Deng, Kailai / Chen, Weiting / Liang, Huanwei / Wang, Jianming	Seismic fragility analysis of reinforced concrete piers in spatially curved urban flyover	1890-1902
Kumar, Pratyush / Samanta, Avik	Seismic fragility assessment of existing reinforced concrete buildings in Patna, India	54-69
Shafaei, Hassan / Naderpour, Hosein	Seismic fragility evaluation of FRP-retrofitted RC frames subjected to mainshock-aftershock records	950-961
Chukka, Naga Dheeraj Kumar Reddy / Krishnamurthy, Muthumani	Seismic performance assessment of structure with hybrid passive energy dissipation device	1246-1259
Abraik, Emad / El-Fitiany, S. F. / Youssef, Maged A.	Seismic performance of concrete core walls reinforced with shape memory alloy bars	1479-1489
Murugan, Komathi / Sengupta, Amlan Kumar	Seismic performance of strengthened reinforced concrete columns	487-505
Hashemi, Ashkan / Quenneville, Pierre	Seismic performance of timber structures using rocking walls with low damage hold-down connectors	274-284
Ahmed, Asfandyar / Shahzada, Khan	Seismic vulnerability assessment of confined masonry structures by macro-modeling approach	639-649
Zhao, Zhanwei / Yu, Lei / Hu, Weibing	Self-locking mechanism of foldable grid structures and capability evaluation of their structural units	583-594
Azim, Iftikhar / Yang, Jian / Iqbal, Muhammad Farjad / Javed, Muhammad Faisal / Nazar, Sohaib / Wang, Feiliang / Liu, Qing-feng	Semi-analytical model for compressive arch action capacity of RC frame structures	1231-1245
Ghavanloo, Esmaeal	Semi-analytical solution for post-buckling analysis of simply-supported multi-stepped columns	1086-1092
Shabdin, M. / Attari, Nader K. A. / Zargaran, M.	Shaking table study on the seismic performance of an Iranian traditional Un-Reinforced Masonry (URM) building	424-439
Liang, Huangbin / Xie, Qiang / Bu, Xianghang / Cao, Yongxing	Shaking table test on 1000 kV UHV transmission tower-line coupling system	650-663
Rouholamin, Milad / Gunalan, Shanmuganathan / Poologanathan, Keerthan / Karampour, Hassan	Shear design rules for roll-formed aluminium lipped channel beams	1139-1164
Wang, Qiang / Song, Hua-Lin / Lu, Chun-Ling / Jin, Ling-Zhi	Shear performance of reinforced ultra-high performance concrete rectangular section beams	1184-1194
Misnon, Noor Aina / Giaretton, Marta / Shedde, Devina / Ingham, Jason / Dizhur, Dmytro	Shear testing of URM wallettes retrofitted with NSM steel wire rope	1613-1622
Balagopal, R. / Ramaswamy, Ananth / Palani, G. S. / Prasad Rao, N.	Simplified bolted connection model for analysis of transmission line towers	2114-2125
Romano, Elvira / Cascini, Lucrezia / D'Aniello, Mario / Portioli, Francesco / Landolfo, Raffaele	A simplified multi-performance approach to life-cycle assessment of steel structures	371-382
Pulatsu, Bora / Erdogmus, Ece / Lourenço, Paulo B. / Lemos, José V. / Tuncay, Kagan	Simulation of the in-plane structural behavior of unreinforced masonry walls and buildings using DEM	2274-2287
Kaveh, A. / Seddighian, M. R.	Simultaneously multi-material layout, and connectivity optimization of truss structures via an Enriched Firefly Algorithm	2217-2231
Yankelevsky, David Z.	Size effect of the modulus of rupture in float glass plates	1637-1645
Sandoli, Antonio / Musella, Christian / Lignola, Gian Piero / Calderoni, Bruno / Prota, Andrea	Spandrel panels in masonry buildings: Effectiveness of the diagonal strut model within the equivalent frame model	879-893
Liu, Yang / Kuang, J. S. / Huang, Qunxian / Guo, Zixiong / Wang, Xueying	Spectrum-based pushover analysis for the quick seismic demand estimation of reinforced concrete shear walls	1490-1500
Chan, Jake L. Y. / Lo, S. H.	Stability design of system scaffold with differential settlement	1467-1478
Estekanchi, Homayoon E. / Mashayekhi, Mohammadreza / Vafai, Hassan / Ahmadi, Goodarz / Mirfarhadi, Sayyed Ali / Harati, Mojtaba	A state-of-knowledge review on the endurance time method	2288-2299
Deifalla, A.	Strength and ductility of lightweight reinforced concrete slabs under punching shear	2329-2345
Wu, Yue / Liu, Xiuming / Luo, Peng / Zhang, Ruinan	Structural analysis and construction quality assessment of a free-form ice composite shell	868-878
Lalthazuala, Ricky / Singh, Konjengbam Darunkumar	Structural behaviour of hybrid stainless steel stub columns under axial compression	128-140
Yu, Penghao / Zhang, Yingying / Gao, Zhenyu / Song, Wei / Zhao, Yushuai	Structural microvibration monitoring and simulation analysis of the proton service building based on the construction process	1841-1850
Yun, Xiang / Wang, Zhongxing / Gardner, Leroy	Structural performance and design of hot-rolled steel SHS and RHS under combined axial compression and bending	1289-1298
Kareem, Rahman S. / Jones, Casey / Dang, Canh N. / Prinz, Gary S. / Hale, W. Micah	Structural performance of concrete bridge decks reinforced with Grade-830 steel bars	1396-1404
Raza, Ali / Ali, Babar / Nawaz, Muhammad Asad / Ahmed, Ibrar	Structural performance of FRP-RC compression members wrapped with FRP composites	1693-1709
Lu, Chun-Ling / Xiao, Yi-Peng / Wang, Qiang / Zhu, Wan-Xu	Study on axial compressive properties of RC square columns strengthened with prestressed CFRP sheets	2011-2024
Amoushahi Khouzani, Mohsen / Zeynalian, Mehran / Hashemi, Mahmoud / Mostofinejad, Davood / Farahbod, Farhang	Study on shear behavior and capacity of biaxial ellipsoidal voided slabs	1075-1085
Rong, Bin / Li, Hongtao / Ma, Xu / Zhang, Ruoyu / Sun, Yiliang	Study on shear failure of joint with external stiffener under seismic loads	259-273
Lu, Wei / Sun, Huibin	Study on support characteristic curve of concrete-filled steel tubular arch in underground support	1809-1819
Yang, You-Fu / Hou, Chao / Liu, Min	Tests and numerical simulation of rectangular RACFST stub columns under concentric compression	396-410
He, Wenfu / Zeng, Yifeng / Wang, Changhong / Liu, Wenguang / Xu, Hao / Keleta, Yonas	Theoretical and experimental studies on tapered plate-rubber isolator	1977-1993
Roostaeyan, Elahe / Mirghaderi, Seyed Rasoul / Ghazizadeh, Sina / Zahrai, Seyed Mehdi	Through gusset connection for two-story X-braced frames, a numerical study	285-296
Tsavdaridis, Konstantinos Daniel / Nicolaou, Andreas / Mistry, Anand Dipak / Efthymiou, Evangelos	Topology optimisation of lattice telecommunication tower and performance-based design considering wind and ice loads	2379-2399
Milanchian, Reza / Hosseini, Mahmood	Torsional response reduction of plan-asymmetric vertical seismic isolation by appropriate distribution of viscous and viscoelastic dampers	962-974
Sultan, Ali A. / Mashrei, Mohammed A. / Washer, Glenn A.	Utilization of Wilcoxon-Mann-Whitney statistics in assessing the reliability of nondestructive evaluation technologies	780-787
Zhang, Chenyu / Liu, Yongjian / Liu, Jiang / Yuan, Zhuoya / Zhang, Guojing / Ma, Zhiyuan	Validation of long-term temperature simulations in a steel-concrete composite girder	1962-1976
Li, Yi / Duan, Ru-Biao / Li, Qiu-Sheng / Li, Yong-Gui / Huang, Xuan	Wind-resistant optimal design of tall buildings based on improved genetic algorithm	2182-2191

About this
data sheet
IssueID
36810
Published on:
26/05/2020
Last updated on:
09/05/2022

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Structures - October 2020

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Structures - October 2020

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.