Structures - Oktober 2020

Erschienen:	Oktober 2020

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Phan, Duc-Huynh	Aeroelastic control of bridge using active control surfaces: Analytical and experiment study	2309-2318
Ren, Chong / Zhang, Peng / Yan, Shen / Dai, Liusi	Analysis and design of cold-formed steel storage rack uprights under localised fires	2082-2095
Phan, Dao Hoang Hiep / Patel, Vipulkumar Ishvarbhai / Abadi, Haider Al / Thai, Huu-Tai	Analysis and design of eccentrically compressed ultra-high-strength slender CFST circular columns	2481-2499
Sadiq, Muhammad / Khaliq, Wasim / Ilyas, Muhammad / Khushnood, Rao Arsalan / Khan, Shaukat Ali / Rong, Pan	Analysis of full-scale aircraft impact to reinforced concrete and steel plate reinforced concrete multiple barriers protecting nuclear power plants	732-746
Tsiavos, Anastasios / Haladij, Peter / Sextos, Anastasios / Alexander, Nicholas A.	Analytical investigation of the effect of a deformable sliding layer on the dynamic response of seismically isolated structures	2426-2436
Tabeshpour, Mohammad Reza / Noorifard, Azadeh	Analytical investigation of torsional mode in symmetric and asymmetric systems with mass or stiffness eccentricity	1433-1445
El-Zohairy, Ayman / Alsharari, Fahad / Salim, Hani	Analytical model and parametric study for externally post-tensioned reinforced concrete-steel composite beams	411-423
Singhal, Shubham / Chourasia, Ajay / Parashar, Jalaj	Anchorage behaviour of headed bars as connection system for precast reinforced concrete structural components	1405-1418
Ruiz-García, Jorge / Ramos-Cruz, José M.	Assessment of permanent drift demands in steel moment-resisting steel buildings due to recorded near-fault forward directivity earthquake ground motions and velocity pulse models	1260-1273
Yazdani, Mahdi / Azimi, Peyman	Assessment of railway plain concrete arch bridges subjected to high-speed trains	174-193
Di Benedetto, S. / Latour, M. / Rizzano, G.	Assessment of the stiffness of 3D cut welded connections with CHS columns and through I-BEAMS	247-258
Hassanein, M. F. / Elkawas, A. A. / Shao, Yong-Bo	Assessment of the suitability of eurocode design model for corrugated web girders with slender flanges	1551-1569
Khaloo, Alireza / Tabatabaeian, Mojtaba / Khaloo, Hooman	The axial and lateral behavior of low strength concrete confined by GFRP wraps: An experimental investigation	747-766
Wang, Weiwei / Lyu, Xuetao / Zhang, Yuzhuo / Yu, Yang / Zhang, Tong	Axial compression performance of thin-walled T-shaped concrete filled steel tubular columns under constant high temperature: Experimental and numerical study	525-541
Li, Jie / Chen, Zhongfan / Chen, Wenwen	Axial load-bearing capacities of pre-cast self-insulation walls made by foam concrete	1951-1961
Abdulla, Nwzad Abduljabar	Axial strength of short concrete-filled plastic tubes	1786-1800
El-Kareim, Ata / Arafa, Ahmed / Hassanin, Amal / Atef, Mohamed / Saber, Ahmed	Behavior and strength of reinforced concrete flanged deep beams with web openings	506-524
Tziavos, Nikolaos I. / Gkantou, Michaela / Theofanous, Marios / Dirar, Samir / Baniotopoulos, Charalampos	Behaviour of grout-filled double-skin tubular steel stub-columns: Numerical modelling and design considerations	1623-1636
Kaveh, A. / Khanzadi, M. / Moghaddam, M. Rastegar	Billiards-inspired optimization algorithm; a new meta-heuristic method	1722-1739
Alabduljabbar, Hisham / West, Jeffrey	Bond behavior of cleaned corroded rebar repaired by partial depth repair	813-823
Albidah, Abdulrahman / Altheeb, Ali / Alrshoudi, Fahed / Abadel, Aref / Abbas, Husain / Al-Salloum, Yousef	Bond performance of GFRP and steel rebars embedded in metakaolin based geopolymer concrete	1582-1593
Ahmad, Mohammad Suhaib / Bhargava, Pradeep	Bond Slip Study Between Concrete and Steel Interface Using Splice Beam Specimen Exposed to Elevated Temperatures	1752-1762
Bhasker, Rohan / Menon, Arun	Characterization of ground motion intensity for the seismic fragility assessment of plan-irregular RC buildings	1763-1776
Tang, Yi-Qun / Du, Er-Feng / Wang, Jing-Quan / Qi, Jia-Nan	A co-rotational curved beam element for geometrically nonlinear analysis of framed structures	1202-1208
Mohammed, Azad A. / Mohammed, Othman K.	Composite concrete – Unregularized timber section for flat roof construction	1324-1334
Alhaddad, Wael / Halabi, Yahia / Xu, Hu / Lei, Honggang	A comprehensive introduction to outrigger and belt-truss system in skyscrapers	989-998
Cao, Yan / Fan, Qingming / Mahmoudi Azar, Sadaf / Alyousef, Rayed / Yousif, Salim T. / Wakil, Karzan / Jermsittiparsert, Kittisak / Ho, Lanh Si / Alabduljabbar, Hisham / Alaskar, Abdulaziz	Computational parameter identification of strongest influence on the shear resistance of reinforced concrete beams by fiber reinforcement polymer	118-127
Al-Rousan, Rajai Z. / AL-Tahat, Mohammad F.	Consequence of anchoring holes technique on the bond behavior between CFRP composites and heat-damaged concrete	1903-1918
Uddin, Md. Alhaz / Alzara, Majed Abdulrahman / Mohammad, Noor / Yosri, Ahmed	Convergence studies of finite element model for analysis of steel-concrete composite beam using a higher-order beam theory	2025-2033
Liu, Peng / Zheng, Zhihui / Yu, Zhiwu	Cooperative work of longitudinal slab ballast-less track prestressed concrete simply supported box girder under concrete creep and a temperature gradient	559-569
Almassri, Belal / Halahla, Abdulsamee M.	Corroded RC beam repaired in flexure using NSM CFRP rod and an external steel plate	343-351
Xue, Songling / Shen, Ruili / Chen, Wei / Shen, Lilai	The corrosion-fatigue measurement test of the Zn-Al alloy coated steel wire	1195-1201
Valizadeh, Hadi / Veladi, Hedayat / Farahmand Azar, Bahman / Sheidaii, Mohammad Reza	The cyclic behavior of Butterfly-shaped Link Steel Plate Shear Walls with and without Buckling-restrainers	607-625
Haghi, Nakisa / Epackachi, Siamak / Kazemi, Mohammad Taghi	Cyclic performance of composite shear walls with boundary elements	102-117
Gorgin, Rahim	Damage identification technique based on mode shape analysis of beam structures	2300-2308
Orlowski, Kristopher / Kennedy, David	Design curves for stiffened engineered timber wall systems: A verified analytical approach	1670-1681
Amran, Y. H. Mugahed / El-Zeadani, Mohamed / Lee, Yeong Huei / Yong Lee, Yee / Murali, G. / Feduik, Roman	Design innovation, efficiency and applications of structural insulated panels: A review	1358-1379
Bessini, J. / Shepherd, P. / Monleón, S. / Lázaro, C.	Design of bending-active tied arches by using a multi-objective optimization method	2319-2328
Yousefi, Amir M. / Samali, Bijan	Design of cold-formed ferritic stainless steel unlipped channels with offset web openings and unfastened flanges subject to web bearing failure under one-flange load scenarios	194-211
Elbana, Abdalla / Talha Junaid, M.	Determination of flexural capacity for GFRP-reinforced concrete beams retrofitted using external CFRP sheet	1384-1395
Ahmad, Subhan / Bhargava, Pradeep / Chourasia, Ajay	Direct shear failure in concrete joints exposed to elevated temperatures	1851-1859
Gong, Jun / Zhi, Xudong	Earthquake failure mode and collapse fragility of a 1000 kV outgoing line frame considering interactions in the tower line system	626-638
Dok, Gokhan / Çağlar, Naci / Ilki, Alper / Yilmaz, Cemal	Effect of impact loading on residual flexural capacity of high-strength reinforced concrete beams	2466-2480
Anike, Emmanuel Ejiofor / Saidani, Messaoud / Olubanwo, Adegoke Omotayo / Tyrer, Mark / Ganjian, Eshmaiel	Effect of mix design methods on the mechanical properties of steel fibre-reinforced concrete prepared with recycled aggregates from precast waste	664-672
Navaratnam, Satheeskumar / Humphreys, Mitchell / Mendis, Priyan / Nguyen, Kate T. Q. / Zhang, Kevin	Effect of roof to wall connection stiffness variations on the load sharing and hold-down forces of Australian timber-framed houses	141-150
Valizadeh, Afsaneh / Hamidi, Fatemeh / Aslani, Farhad / Shaikh, Faiz Uddin Ahmed	The effect of specimen geometry on the compressive and tensile strengths of self-compacting rubberised concrete containing waste rubber granules	1646-1659
Pathak, Shivang / Khennane, Amar / Watt, Simon / Al-deen, Safat	Effectiveness of physics-based collapse criteria in seismic risk assessment of code-conforming low-rise RC framed structures	440-461
Guo, Quanquan / Zhang, Peiyao / Fu, Yiqing / Ke, Fei	Effects of out-of-plane eccentric axial compression on in-plane hysteretic behavior of SC walls	1570-1581
Sharkawi, Aladdin / Taman, Mohamed / Afefy, Hamdy M. / Hegazy, Yasmeen	Efficiency of geopolymer vs. high-strength grout as repairing material for reinforced cementitious elements	330-342
Wen, Qing-Jie / Yue, Zi-Xiang	Elastic buckling property of the upper chords in aluminum half-through truss bridges	1919-1929
Safari Tarbozagh, Alireza / Rezaifar, Omid / Gholhaki, Majid	Electromagnetism in taking concrete behavior on demand	1057-1065
Nabi, Junaid / Abdul, Rahim A.	Employing B-Spline approach in parametric assessment of catenary shaped fabric-formed concrete beams	474-486
Panian, René / Yazdani, Mahdi	Estimation of the service load capacity of plain concrete arch bridges using a novel approach: Stress intensity factor	1521-1534
Issa, Usama H. / Mosaad, Salah A. A. / Hassan, M. Salah	Evaluation and selection of construction projects based on risk analysis	361-370
Olalusi, Oladimeji B. / Spyridis, Panagiotis / Strauss, Alfred	Evaluation of design concepts for post-installed punching shear retrofitting	1710-1721
Dehghani, Ayoub / Mozafari, Ali Reza / Aslani, Farhad	Evaluation of the efficacy of using engineered cementitious composites in RC beam-column joints	151-162
Jędrzejewska, Agnieszka / Kanavaris, Fragkoulis / Zych, Mariusz / Schlicke, Dirk / Azenha, Miguel	Experiences on early age cracking of wall-on-slab concrete structures	2520-2549
Nasery, Mohammad Manzoor / Ağacakoca, Elif / Yaman, Zeynep	Experimental and numerical analysis of impactor geometric shape effects on steel beams under impact loading	1118-1138
Yang, Jun / Guo, Tong / Chai, Shun	Experimental and numerical investigation on seismic behaviours of beam-column joints of precast prestressed concrete frame under given corrosion levels	1209-1221
Wang, Xiaoming / Yang, Wei / Zhang, Xinmin / Zhu, Peng	Experimental and numerical study on a novel cable anchorage system to improve the maintainability of suspension bridges	2126-2136
Minaei, A. / Daneshjoo, F. / Goicolea, José M.	Experimental and numerical study on cable breakage equivalent force in cable-stayed structures consisting of low-relaxation seven-wire steel strands	595-606
Tartaglia, Roberto / D'Aniello, Mario / Zimbru, Mariana	Experimental and numerical study on the T-Stub behaviour with preloaded bolts under large deformations	2137-2155
Wang, Wen-Da / Xian, Wei / Hou, Chao / Shi, Yan-Li	Experimental investigation and FE modelling of the flexural performance of square and rectangular SRCFST members	2411-2425
Abed, Farid H. / Megahed, Mai	Experimental investigation of buckling response of pretwisted structural steel columns	2232-2244
Shabani Attar, Hamed / Esfahani, M. Reza / Ramezani, Ahmadreza	Experimental investigation of flexural and shear strengthening of RC beams using fiber-reinforced self-consolidating concrete jackets	46-53
Augusthus-Nelson, L. / Swift, G.	Experimental investigation of the residual behaviour of damaged masonry arch structures	2500-2512
Wang, Fa-Cheng / Zhao, Hua-Yang	Experimental investigation on blast furnace slag aggregate concrete filled double skin tubular (CFDST) stub columns under sustained loading	352-360
Liu, Ruyan / Li, Hui / Jiang, Qinghui / Meng, Xiaoyu	Experimental investigation on flexural properties of directional steel fiber reinforced rubberized concrete	1660-1669
Wang, Bo / Wang, Zhengpeng / Uji, Kimitaka / Zhang, Junlei / Guo, Rui	Experimental investigation on shear behavior of RC beams strengthened by CFRP grids and PCM	1994-2010
Taheri, Ali / Tasnimi, Abass Ali / Moghadam, Abdolreza Sarvghad	Experimental investigation on the seismic behavior and damage states of reinforced high strength concrete columns	163-173
Yu, Sujian / Wu, Chenglong / Zhou, Fei / Wang, Pengfei / Zhao, Kaichang / Liu, Jiming	Experimental study and numerical simulation of a new prefabricated SRC column to steel beam composite joint	999-1010
Emamyari, Alireza / Sheidaii, Mohammad Reza / Kookalanifar, Amir / Showkati, Hossein / Akbarzadeh, Neda	Experimental study on cyclic behavior of stiffened perforated steel shear panels	2400-2410
Dong, Bingqing / Pan, Jinlong / Cai, Jingming / Zeng, Hao	Experimental study on local compressive behaviour of ECC ring beam connections	2069-2081
Sarvari, Saeed / Esfahani, M. Reza	An experimental study on post-punching behavior of flat slabs	894-902
Wang, Wanqian / Wang, Jingfeng / Yang, T. Y. / Guo, Lei / Song, Huihui	Experimental testing and analytical modeling of CFS shear walls filled with LPM	917-933
Islam, Kamrul / Billah, AHM Muntasir / Chowdhury, Md. Mominul Islam / Ahmed, Khondaker Sakil	Exploratory study on bond behavior of plain and sand coated stainless steel rebars in concrete	2365-2378
Gao, Danying / Gu, Zhiqiang / Zhu, Haitang / Huang, Yunchao	Fatigue behavior assessment for steel fiber reinforced concrete beams through experiment and Fatigue Prediction Model	1105-1117
Haido, James H.	Flexural behavior of basalt fiber reinforced concrete beams: Finite element simulation with new constitutive relationships	1876-1889
Inaam, Qazi / Upadhyay, Akhil	Flexural behaviour of steel I-girder having corrugated webs and slender flanges	12-21
Chen, Jin-Yang / Wang, Fa-Cheng / Han, Lin-Hai / Mu, Ting-Min	Flexural performance of concrete-encased CFST box members	2034-2047
Hu, Yuqing / Meloni, M. / Cheng, Zhao / Wang, Jingquan / Xiu, Hongliang	Flexural performance of steel-UHPC composite beams with shear pockets	570-582
Kar, Swapnasarit / Biswal, K. C.	FRP shear contribution prediction for U-wrapped RC T-beams using a soft computing tool	1093-1104
Naresh, K. / Shankar, K. / Velmurugan, R. / Gupta, N. K.	High strain rate studies for different laminate configurations of bi-directional glass/epoxy and carbon/epoxy composites using DIC	2451-2465
Onat, Onur	Impact of mechanical properties of historical masonry bridges on fundamental vibration frequency	1011-1028
Mortazavi, Seyed Javad / Mansouri, Iman / Awoyera, Paul O. / Naser, M. Z.	Implementation of new elements and material models in OpenSees software to account for post-earthquacke fire damage	1777-1785
Meng, Bao / Hao, Jiping / Zhong, Weihui / Tan, Zheng / Duan, Shichao	Improving collapse-resistance performance of steel frame with openings in beam web	2156-2169
Nikkhoo, Ali / Karegar, Hossein / Mohammadi, Reza Karami / Hejazi, Farzad	Improving the performance of the autoregressive method in modal identification of output-only systems using the empirical mode decomposition	1165-1173
Basit, S. / Maki, T. / Mutsuyoshi, H. / Ishihara, Y. / Tajima, H.	Influence of reinforcement arrangement details on mechanical behavior of precast concrete barrier with loop connection	1682-1692
Gandelli, Emanuele / De Domenico, Dario / Dubini, Paolo / Besio, Matteo / Bruschi, Eleonora / Quaglini, Virginio	Influence of the breakaway friction on the seismic response of buildings isolated with curved surface sliders: Parametric study and design recommendations	788-812
Askariani, Seyed Saeed / Garivani, Sadegh	Introducing and numerical study of a new brace-type slit damper	702-717
Radkia, Sahar / Rahnavard, Rohola / Tuwair, Hesham / Abbas Gandomkar, Farhad / Napolitano, Rebecca	Investigating the effects of seismic isolators on steel asymmetric structures considering soil-structure interaction	1029-1040
Kumbhar, Onkar G. / Kumar, Ratnesh / Farsangi, Ehsan Noroozinejad	Investigating the efficiency of DDBD approaches for RC buildings	1501-1520
Paslar, Nima / Farzampour, Alireza / Hatami, Farzad	Investigation of the infill plate boundary condition effects on the overall performance of the steel plate shear walls with circular openings	824-836
Di, Jin / Han, Bin / Qin, Fengjiang	Investigation of U-bar joints between precast bridge decks loaded in combined bending and shear	37-45
Lee, Adam D. / Shepherd, Paul / Evernden, Mark C.	Large deflections in thin rectangular plates subjected to uniform load: Pitfalls in the application of analytical methods	1419-1432
Rossi, Alexandre / Nicoletti, Renato Silva / de Souza, Alex Sander Clemente / Martins, Carlos Humberto	Lateral distortional buckling in steel-concrete composite beams: A review	1299-1312
Asadi, Payam / Nikfar, Davood / Hajirasouliha, Iman	Life-cycle cost based design of bridge lead-rubber isolators in seismic regions	383-395
Drewniok, Michał P. / Campbell, Jamie / Orr, John	The Lightest Beam Method – A methodology to find ultimate steel savings and reduce embodied carbon in steel framed buildings	687-701
Darzi, Siavash / Karampour, Hassan / Bailleres, Henri / Gilbert, Benoit P. / Fernando, Dilum	Load bearing sandwich timber walls with plywood faces and bamboo core	2437-2450
Mousapoor, Esmaeil / Ghiasi, Vahed / Madandoust, Rahmat	Macro modeling of slab-column connections in progressive collapse with post-punching effect	837-852
Alogdianakis, Filippos / Charmpis, Dimos C. / Balafas, Ioannis	Macroscopic effect of distance from seacoast on bridge deterioration – Statistical data assessment of structural condition recordings	319-329
Zhou, Wangbao / Nie, Leixin / Jiang, Lizhong / Feng, Yulin / Tan, Zhihua / Chai, Xilin	Mapping relation between pier settlement and rail deformation of unit slab track system	1066-1074
Cavaleri, Liborio / Ciraolo, Giuseppe / Ferrotto, Marco Filippo / La Loggia, Goffredo / Lo Re, Carlo / Manno, Giorgio	Masonry structures subjected to tsunami loads: Modeling issues and application to a case study	2192-2207
El-Sokkary, Hossam / Galal, Khaled	Material Quantities of Reinforced Masonry versus Reinforced Concrete Shear Walls	767-779
Xin, Haohui / Mosallam, Ayman / Correia, José A. F. O. / Liu, Yuqing / He, Jun / Sun, Yun	Material-structure integrated design optimization of GFRP bridge deck on steel girder	1222-1230
Xu, Fan / Wang, Sheliang / Li, Tao / Liu, Bo / Li, Binbin / Zhou, Yuan	The mechanical properties of tailing recycled aggregate concrete and its resistance to the coupled deterioration of sulfate attack and wetting–drying cycles	2208-2216
Rajaei, Majid / Elahi, S. Hossein / Asefi, Ashkan	Modal properties of closed-cell zinc foam	1380-1383
Ramadan, Abdullah / Shehata, Ahmed / Younis, Abdul-Aziz / Wong, Lui Sammy / Nehdi, Moncef L.	Modeling structural behavior of precast concrete pipe with single elliptical steel cage reinforcement	903-916
Szopa, Krystian / Iwaniec, Marek / Iwaniec, Joanna	Modelling and identification of bolted truss structure with the use of design of experiment approach	462-473
Khan, Nasar Ahmad / Srivastava, Gaurav	Models for strength and stiffness of steel plate shear walls with openings	2096-2113
Kazeminezhad, Ehsan / Kazemi, Mohammad Taghi / Mirhosseini, S. Mohammad	Modified procedure of lead rubber isolator design used in the reinforced concrete building	2245-2273
Del Rey Castillo, E. / Ingham, J.	Monotonic behaviour of post-installed mechanical anchors installed in prestressed concrete hollow-core floor units	1801-1808
Sharma, Nishant / Dasgupta, Kaustubh / Dey, Arindam	Natural period of reinforced concrete building frames on pile foundation considering seismic soil-structure interaction effects	1594-1612
Hosseinpour, Mahmoud / Sharifi, Yasser / Sharifi, Hojjat	Neural network application for distortional buckling capacity assessment of castellated steel beams	1174-1183
Zhao, Deng / Wang, Xiaosun	New method to evaluate the rate of convergence for two-dimensional system involving friction damper	2513-2519
Marques, Marília G. / Liberati, Elyson A. P. / Pimentel, Mário J. / de Souza, Rafael A. / Trautwein, Leandro M.	Nonlinear finite element analysis (NLFEA) of reinforced concrete flat slabs with holes	1-11
Al-Rousan, Rajai Z. / Alhassan, Mohammad / Al-wadi, Razan	Nonlinear finite element analysis of full-scale concrete bridge deck slabs reinforced with FRP bars	1820-1831
He, Jun / Li, Xiang / Li, Chuanxi / Correia, José A. F. O. / Xin, Haohui / Zhou, Man	A novel asynchronous-pouring-construction technology for prestressed concrete box girder bridges with corrugated steel webs	1940-1950
Shaheen, Mohamed A. / Foster, Andrew S. J. / Cunningham, Lee S. / Afshan, Sheida	A numerical investigation into stripping failure of bolt assemblies at elevated temperatures	1458-1466
Kalibhat, Madhusudan G. / Upadhyay, Akhil	Numerical modeling of continuous steel concrete composite girders considering cracking of concrete	1313-1323
Simão, Pedro Dias / Dias da Silva, Vitor	On the propensity of shear deformable columns to buckle under a tensile axial load	1832-1840
Nabid, Neda / Hajirasouliha, Iman / Escolano Margarit, David / Petkovski, Mihail	Optimum energy based seismic design of friction dampers in RC structures	2550-2562
Jing, John / Clifton, G. Charles / Roy, Krishanu / Lim, James B. P.	Performance of a novel slider device in multi-storey cold-formed steel modular buildings under seismic loading	212-246
Ghith, Ahmed / Ezzeldin, Mohamed / Tait, Michael / El-Dakhakhni, Wael	Performance of battery rack auxiliary power systems under FEMA 461 quasi-static seismic loading protocol	1041-1056
Murthy, A. Ramachandra / Pukazhendhi, DM. / Vishnuvardhan, S. / Saravanan, M. / Gandhi, P.	Performance of concrete beams reinforced with GFRP bars under monotonic loading	1274-1288
Al-Abdwais, Ahmed H. / Al-Mahaidi, Riadh S.	Performance of reinforced concrete beams strengthened with NSM CFRP composites for flexure using cement-based adhesives	1446-1457
Nematzadeh, Mahdi / Karimi, Amirhossein / Gholampour, Aliakbar	Pre- and post-heating behavior of concrete-filled steel tube stub columns containing steel fiber and tire rubber	2346-2364
Huang, Caigui / Huang, Surong	Predicting capacity model and seismic fragility estimation for RC bridge based on artificial neural network	1930-1939
Ho, Nhat-Minh / Doh, Jeung-Hwan / Fragomeni, Sam / Yang, Jiacheng / Yan, Kai / Guerrieri, Maurice	Prediction of axial load capacity of concrete walls with openings restrained on three sides	1860-1875
Thakur, A. / Senthil, K. / Singh, A. P. / Iqbal, M. A.	Prediction of dynamic amplification factor on clay brick masonry assemblage	673-686
Yuan, Ye / Liu, Haiqing / Zhao, Zhongwei / Yan, Renzhang	Probability distribution model of the bending capacity for WHSJ with multiple randomly pitting corrosion	1740-1751
Moslemi, Abdollah / Navayi neya, Bahram / Davoodi, Mohammad Reza / Dehestani, Mehdi	Proposing and finite element analysis of a new composite profiled sheet deck	70-85
Jiang, Linwei / Zhong, Jian / Yuan, Wancheng	The pulse effect on the isolation device optimization of simply supported bridges in near-fault regions	853-867
Setiawan, Andri / Vollum, Robert L. / Macorini, Lorenzo / Izzuddin, Bassam A.	Punching of RC slabs without transverse reinforcement supported on elongated columns	2048-2068
Veladi, Hedayat / Farahmand Azar, Bahman / Rahimi Gendeshmin, Saeed	Quantifying higher mode effects in rocking systems considering shear-flexural behavior	542-558
Zareie, Shahin / Issa, Anas Salem / Seethaler, Rudolf J. / Zabihollah, Abolghassem	Recent advances in the applications of shape memory alloys in civil infrastructures: A review	1535-1550
Stephen, Iyinoluwa / Hughes, Eric / Das, Sreekanta	Reinforced concrete beams strengthened with basalt fibre fabric – A parametric study	309-318
Llanes-Tizoc, Mario D. / Reyes-Salazar, Alfredo / Ruiz, Sonia E. / Valenzuela-Beltrán, Federico / Bojórquez, Edén / Chávez, Robespierre	Reliability analysis of steel buildings considering the flexibility of the connections of the GFs	2170-2181
Shirgir, Sina / Farahmand Azar, Bahman / Hadidi, Ali	Reliability-based simplification of Bouc-Wen model and parameter identification using a new hybrid algorithm	297-308
Tan, Zheng / Zhong, Wei-hui / Tian, Li-min / Meng, Bao / Song, Xiao-yan / Qiu, Shuai-zi	Research on the collapse-resistant performance of composite beam–column substructures using multi-scale models	86-101
Daneshvar, Kambiz / Moradi, Mohammad Javad / Amooie, Morteza / Chen, Siyu / Mahdavi, Golsa / Hariri-Ardebili, Mohammad Amin	Response of low-percentage FRC slabs under impact loading: Experimental, numerical, and soft computing methods	975-988
Wang, J. H. / Sun, Y. P. / Takeuchi, T. / Koyama, T.	Seismic behavior of circular fly ash concrete columns reinforced with low-bond high-strength steel rebar	1335-1357
Zheng, Lianqiong / Zheng, Yuting	Seismic behaviour of concrete-filled steel tubular column and precast shear wall connections	934-949
Usefi, Nima / Ronagh, Hamid	Seismic characteristics of hybrid cold-formed steel wall panels	718-731
Khanal, Bharat / Chaulagain, Hemchandra	Seismic elastic performance of L-shaped building frames through plan irregularities	22-36
Xu, Tengfei / Zhang, Ziyang / Li, Yaping / Deng, Kailai / Chen, Weiting / Liang, Huanwei / Wang, Jianming	Seismic fragility analysis of reinforced concrete piers in spatially curved urban flyover	1890-1902
Kumar, Pratyush / Samanta, Avik	Seismic fragility assessment of existing reinforced concrete buildings in Patna, India	54-69
Shafaei, Hassan / Naderpour, Hosein	Seismic fragility evaluation of FRP-retrofitted RC frames subjected to mainshock-aftershock records	950-961
Chukka, Naga Dheeraj Kumar Reddy / Krishnamurthy, Muthumani	Seismic performance assessment of structure with hybrid passive energy dissipation device	1246-1259
Abraik, Emad / El-Fitiany, S. F. / Youssef, Maged A.	Seismic performance of concrete core walls reinforced with shape memory alloy bars	1479-1489
Murugan, Komathi / Sengupta, Amlan Kumar	Seismic performance of strengthened reinforced concrete columns	487-505
Hashemi, Ashkan / Quenneville, Pierre	Seismic performance of timber structures using rocking walls with low damage hold-down connectors	274-284
Ahmed, Asfandyar / Shahzada, Khan	Seismic vulnerability assessment of confined masonry structures by macro-modeling approach	639-649
Zhao, Zhanwei / Yu, Lei / Hu, Weibing	Self-locking mechanism of foldable grid structures and capability evaluation of their structural units	583-594
Azim, Iftikhar / Yang, Jian / Iqbal, Muhammad Farjad / Javed, Muhammad Faisal / Nazar, Sohaib / Wang, Feiliang / Liu, Qing-feng	Semi-analytical model for compressive arch action capacity of RC frame structures	1231-1245
Ghavanloo, Esmaeal	Semi-analytical solution for post-buckling analysis of simply-supported multi-stepped columns	1086-1092
Shabdin, M. / Attari, Nader K. A. / Zargaran, M.	Shaking table study on the seismic performance of an Iranian traditional Un-Reinforced Masonry (URM) building	424-439
Liang, Huangbin / Xie, Qiang / Bu, Xianghang / Cao, Yongxing	Shaking table test on 1000 kV UHV transmission tower-line coupling system	650-663
Rouholamin, Milad / Gunalan, Shanmuganathan / Poologanathan, Keerthan / Karampour, Hassan	Shear design rules for roll-formed aluminium lipped channel beams	1139-1164
Wang, Qiang / Song, Hua-Lin / Lu, Chun-Ling / Jin, Ling-Zhi	Shear performance of reinforced ultra-high performance concrete rectangular section beams	1184-1194
Misnon, Noor Aina / Giaretton, Marta / Shedde, Devina / Ingham, Jason / Dizhur, Dmytro	Shear testing of URM wallettes retrofitted with NSM steel wire rope	1613-1622
Balagopal, R. / Ramaswamy, Ananth / Palani, G. S. / Prasad Rao, N.	Simplified bolted connection model for analysis of transmission line towers	2114-2125
Romano, Elvira / Cascini, Lucrezia / D'Aniello, Mario / Portioli, Francesco / Landolfo, Raffaele	A simplified multi-performance approach to life-cycle assessment of steel structures	371-382
Pulatsu, Bora / Erdogmus, Ece / Lourenço, Paulo B. / Lemos, José V. / Tuncay, Kagan	Simulation of the in-plane structural behavior of unreinforced masonry walls and buildings using DEM	2274-2287
Kaveh, A. / Seddighian, M. R.	Simultaneously multi-material layout, and connectivity optimization of truss structures via an Enriched Firefly Algorithm	2217-2231
Yankelevsky, David Z.	Size effect of the modulus of rupture in float glass plates	1637-1645
Sandoli, Antonio / Musella, Christian / Lignola, Gian Piero / Calderoni, Bruno / Prota, Andrea	Spandrel panels in masonry buildings: Effectiveness of the diagonal strut model within the equivalent frame model	879-893
Liu, Yang / Kuang, J. S. / Huang, Qunxian / Guo, Zixiong / Wang, Xueying	Spectrum-based pushover analysis for the quick seismic demand estimation of reinforced concrete shear walls	1490-1500
Chan, Jake L. Y. / Lo, S. H.	Stability design of system scaffold with differential settlement	1467-1478
Estekanchi, Homayoon E. / Mashayekhi, Mohammadreza / Vafai, Hassan / Ahmadi, Goodarz / Mirfarhadi, Sayyed Ali / Harati, Mojtaba	A state-of-knowledge review on the endurance time method	2288-2299
Deifalla, A.	Strength and ductility of lightweight reinforced concrete slabs under punching shear	2329-2345
Wu, Yue / Liu, Xiuming / Luo, Peng / Zhang, Ruinan	Structural analysis and construction quality assessment of a free-form ice composite shell	868-878
Lalthazuala, Ricky / Singh, Konjengbam Darunkumar	Structural behaviour of hybrid stainless steel stub columns under axial compression	128-140
Yu, Penghao / Zhang, Yingying / Gao, Zhenyu / Song, Wei / Zhao, Yushuai	Structural microvibration monitoring and simulation analysis of the proton service building based on the construction process	1841-1850
Yun, Xiang / Wang, Zhongxing / Gardner, Leroy	Structural performance and design of hot-rolled steel SHS and RHS under combined axial compression and bending	1289-1298
Kareem, Rahman S. / Jones, Casey / Dang, Canh N. / Prinz, Gary S. / Hale, W. Micah	Structural performance of concrete bridge decks reinforced with Grade-830 steel bars	1396-1404
Raza, Ali / Ali, Babar / Nawaz, Muhammad Asad / Ahmed, Ibrar	Structural performance of FRP-RC compression members wrapped with FRP composites	1693-1709
Lu, Chun-Ling / Xiao, Yi-Peng / Wang, Qiang / Zhu, Wan-Xu	Study on axial compressive properties of RC square columns strengthened with prestressed CFRP sheets	2011-2024
Amoushahi Khouzani, Mohsen / Zeynalian, Mehran / Hashemi, Mahmoud / Mostofinejad, Davood / Farahbod, Farhang	Study on shear behavior and capacity of biaxial ellipsoidal voided slabs	1075-1085
Rong, Bin / Li, Hongtao / Ma, Xu / Zhang, Ruoyu / Sun, Yiliang	Study on shear failure of joint with external stiffener under seismic loads	259-273
Lu, Wei / Sun, Huibin	Study on support characteristic curve of concrete-filled steel tubular arch in underground support	1809-1819
Yang, You-Fu / Hou, Chao / Liu, Min	Tests and numerical simulation of rectangular RACFST stub columns under concentric compression	396-410
He, Wenfu / Zeng, Yifeng / Wang, Changhong / Liu, Wenguang / Xu, Hao / Keleta, Yonas	Theoretical and experimental studies on tapered plate-rubber isolator	1977-1993
Roostaeyan, Elahe / Mirghaderi, Seyed Rasoul / Ghazizadeh, Sina / Zahrai, Seyed Mehdi	Through gusset connection for two-story X-braced frames, a numerical study	285-296
Tsavdaridis, Konstantinos Daniel / Nicolaou, Andreas / Mistry, Anand Dipak / Efthymiou, Evangelos	Topology optimisation of lattice telecommunication tower and performance-based design considering wind and ice loads	2379-2399
Milanchian, Reza / Hosseini, Mahmood	Torsional response reduction of plan-asymmetric vertical seismic isolation by appropriate distribution of viscous and viscoelastic dampers	962-974
Sultan, Ali A. / Mashrei, Mohammed A. / Washer, Glenn A.	Utilization of Wilcoxon-Mann-Whitney statistics in assessing the reliability of nondestructive evaluation technologies	780-787
Zhang, Chenyu / Liu, Yongjian / Liu, Jiang / Yuan, Zhuoya / Zhang, Guojing / Ma, Zhiyuan	Validation of long-term temperature simulations in a steel-concrete composite girder	1962-1976
Li, Yi / Duan, Ru-Biao / Li, Qiu-Sheng / Li, Yong-Gui / Huang, Xuan	Wind-resistant optimal design of tall buildings based on improved genetic algorithm	2182-2191

Über diese
Datenseite
IssueID
36810
Veröffentlicht am:
26.05.2020
Geändert am:
09.05.2022

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Structures - Oktober 2020

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Structures - Oktober 2020

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.