Structures - February 2020

Published:	February 2020

Articles in this Issue

Author(s)	Title	Page(s)
Kolawole, John Temitope / Olalusi, Oladimeji Benedict / Orimogunje, Ademola Johnson	Adhesive bond potential of compressed stabilised earth brick	812-820
Arabzadeh, Abolfazl	Analysis of boundary condition effects on RC deep beams	821-830
Ahmad, Subhan / Kumar, Ajay / Kumar, Kamal	Axial performance of GGBFS concrete filled steel tubes	539-550
Isleem, Haytham F. / Tahir, Muhammad / Wang, Zhenyu	Axial stress–strain model developed for rectangular RC columns confined with FRP wraps and anchors	779-788
Harvey, P. S. / Cain, T. M. N.	Buckling of elastic columns with initial imperfections and load eccentricity	660-664
Schanck, Andrew P. / Davids, William G.	Capacity assessment of older t-beam bridges by nonlinear proxy finite-element analysis	267-278
Arun Solomon, A. / Hemalatha, G.	Characteristics of expanded polystyrene (EPS) and its impact on mechanical and thermal performance of insulated concrete form (ICF) system	204-213
Das, R. / Steensels, R. / Dragan, D. / Vandoren, B. / Degee, H.	Characterization and optimization of a steel beam to RC wall connection for use in innovative hybrid coupled wall systems	111-125
Hung, Chung-Chan / Hsieh, Ping-Lun	Comparative study on shear failure behavior of squat high-strength steel reinforced concrete shear walls with various high-strength concrete materials	56-68
Akl, James / Alladkani, Fadi / Dumond, Patrick	Comparing and optimizing analytical, numerical and experimental vibration models for a simply-supported ribbed plate	690-701
Murali Krishna, B. / Guru Prathap Reddy, V. / Shafee, Mohammed / Tadepalli, T.	Condition assessment of RC beams using artificial neural networks	1-12
Chin, Chee-Loong / Ong, Chin-Boon / Tan, Jia-Yang / Ma, Chau-Khun / Awang, Abdullah Zawawi / Omar, Wahid	Confinement-concrete interaction in pre-tensioned partial steel-confined concrete	751-765
Li, Le / Li, Chun-Qing / Mahmoodian, Mojtaba / Shi, Wenhai	Corrosion induced degradation of fatigue strength of steel in service for 128 years	415-424
Siar Mahmood Shah, Ahmad / Moradi, Saber	Cyclic response sensitivity of energy dissipating steel plate fuses	799-811
Qi, Shijie / Shi, Pengcheng / Yan, Chun / Imran, Ali / Liu, Dong / Zhu, Yingdan / Herrmann, Axel S.	Damage model based on gradient property method for simulating the tensile behavior of composite laminates with Variable Angle Tow reinforcement	152-163
Kalemci, Elif Nur / İkizler, Sabriye Banu / Dede, Tayfun / Angin, Zekai	Design of reinforced concrete cantilever retaining wall using Grey wolf optimization algorithm	245-253
Arabshahi, Alireza / Gharaei-Moghaddam, Nima / Tavakkolizadeh, Mohammadreza	Development of applicable design models for concrete columns confined with aramid fiber reinforced polymer using Multi-Expression Programming	225-244
Mohandoss, Prabha / Pillai, Radhakrishna G. / Sengupta, Amlan K.	Effect of compressive strength of concrete on transmission length of pre-tensioned concrete systems	304-313
Eslami, Abolfazl / Moghavem, Alireza / Shayegh, Hamid R. / Ronagh, Hamid R.	Effect of FRP stitching anchors on ductile performance of shear-deficient RC beams retrofitted using FRP U-wraps	407-414
Shomali, Amir / Mostofinejad, Davood / Esfahani, Mohammad Reza	Effective strain of CFRP in RC beams strengthened in shear with NSM reinforcements	635-645
Pinto, Clemente / Fonseca, João	Effects of initial form-finding models on shape, force paths, and buckling of anti-funicular shells with free edges	472-480
Kassem, Moustafa Moufid / Nazri, Fadzli Mohamed / Farsangi, Ehsan Noroozinejad	The efficiency of an improved seismic vulnerability index under strong ground motions	366-382
Jebadurai, S. V. S. / Tensing, D. / Pradhan, P. M. / Hemalatha, G.	Enhancing performance of infill masonry with latex modified mortar subjected to cyclic load	551-557
Perumalla, Mallikarjun / Laskar, Arghadeep	Evaluation of Design Methods for Prestressed Concrete Members with Stirrups Using a New Traditional Shear Database	621-634
Vitorino, Hugo / Rodrigues, Hugo / Couto, Carlos	Evaluation of post-earthquake fire capacity of a reinforced concrete one bay plane frame under ISO fire exposure	602-611
Tong, Jing-Zhong / Pan, Wen-Hao / Pi, Yong-Lin	Exact solutions for second-order effect of imperfect beams and frames based on matrix structural analysis	677-689
Shirinkam, Mohammad Reza / Razzaghi, Javad	Experimental and analytical investigation on the behavior of metallic Box-Shaped Dampers (BSD)	766-778
Al-Kamaki, Yaman S. S. / Al-Mahaidi, Riadh / Al-Mosawe, Alaa / Bennetts, Ian	Experimental and numerical study on wrapping concrete cylinders post heating and cooling under preload using CFRP fabrics	425-436
Cavène, Edouard / Durif, Sébastien / Bouchaïr, Abdelhamid / Toussaint, Evelyne	Experimental study of slotted hole bolted cover-plate connection using full field measurement	573-587
Ababneh, Ayman N. / Al-Rousan, Rajai Z. / Ghaith, Issam M. N.	Experimental study on anchoring of FRP-strengthened concrete beams	26-33
Arabzadeh, Abolfazl / Hizaji, Rouhollah / Yang, T. Y.	Experimentally studying and development of curved STM to predict the load capacity and failure mode of fixed-ended RC deep beams	289-303
Shirai, Kazutaka / Yin, Hor / Teo, Wee	Flexural capacity prediction of composite RC members strengthened with UHPC based on existing design models	44-55
Abbass, Ahmmad A. / Abid, Sallal R. / Arna'ot, Farid H. / Al-Ameri, Raad A. / Özakça, Mustafa	Flexural response of hollow high strength concrete beams considering different size reductions	69-86
Lowe, Daniel / Roy, Krishanu / Das, Raj / Clifton, Charles G. / Lim, James B. P.	Full scale experiments on splitting behaviour of concrete slabs in steel concrete composite beams with shear stud connection	126-138
Zhang, Haiqiu / Hadi, Muhammad N. S.	Geogrid-confined pervious geopolymer concrete piles with FRP-PVC-confined concrete core: Analytical models	731-738
Faria, Ricardo / Marreiros, Rui / Ramos, António Pinho / Jesus, Catarina	Influence of the top reinforcement detailing in the behaviour of flat slabs	718-730
Amaireh, Layla / Al-Rousan, Rajai Z. / Ababneh, Ayman N. / Alhassan, Mohammad	Integration of CFRP strips as an internal shear reinforcement in reinforced concrete beams	13-19
Deng, Mingke / Ma, Fudong / Wang, Xuesong / Lu, Hao	Investigation on the shear behavior of steel reinforced NC/HDC continuous deep beam	20-25
Bandyopadhyay, Atrayee / Maurya, Kundan K. / Samanta, Amiya K.	Investigation on UPVC confined RC columns with Recycled Aggregate Concrete using C&D waste	279-288
Haghi, Nakisa / Epackachi, Siamak / Kazemi, Mohammad Taghi	Macro modeling of steel-concrete composite shear walls	383-406
Ju, Hyunjin / Lee, Deuckhang / Kim, Jong R. / Kim, Kang Su	Maximum torsional reinforcement ratio of reinforced concrete beams	481-493
Mohammed, Saif I. / Najim, Khalid B.	Mechanical strength, flexural behavior and fracture energy of Recycled Concrete Aggregate self-compacting concrete	34-43
Jensen, Keith / Al-Rubaye, Salam / Thomas, Robert J. / Maguire, Marc	Mechanics-Based model for elastic Bending, Axial, thermal Deformations, and asymmetry of concrete composite sandwich wall panels	459-471
Shadlou, Masoud / Ahmadi, Ehsan / Kashani, Mohammad Mehdi	Micromechanical modelling of mortar joints and brick-mortar interfaces in masonry Structures: A review of recent developments	831-844
Yang, T. Y. / Amani Dashlejeh, Asghar / Arabzadeh, Abolfazl / Hizaji, Rouhollah	New model for prediction of ultimate load of prestressed RC deep beams	509-517
El Kahi, Elio / Deck, Olivier / Khouri, Michel / Mehdizadeh, Rasool / Rahme, Pierre	A new simplified meta-model to evaluate the transmission of ground movements to structures integrating the elastoplastic soil behavior	324-334
Kazemi, Mostafa / Li, Jie / Lahouti Harehdasht, Salar / Yousefieh, Negin / Jahandari, Soheil / Saberian, Mohammad	Non-linear behaviour of concrete beams reinforced with GFRP and CFRP bars grouted in sleeves	87-102
Alsanat, Husam / Gunalan, Shanmuganathan / Poologanathan, Keerthan / Guan, Hong / Tsavdaridis, Konstantinos Daniel	Numerical investigation of web crippling in fastened aluminium lipped channel sections under two-flange loading conditions	351-365
Kalibhat, Madhusudan G. / Upadhyay, Akhil	Numerical study on the deformation behavior of steel concrete composite girders considering partial shear interaction	437-446
Zhang, Qingwen / Zhao, Zibin / Chen, Jianfeng / Fan, Feng / Shen, Shizhao	On the static properties and stability of 800 m long-span mega-latticed suspension structures	139-151
Zhao, Bida / Sun, Chao / Cai, Yangzheng / Liu, Chengqing	An out-of-plane bending hysteretic model for multi-planar CHS X-connections	335-350
Qi, Jianan / Ma, Zhongguo John / Wang, Jingquan / Bao, Yi	Post-cracking shear behaviour of concrete beams strengthened with externally prestresssed tendons	214-224
Arnau-Paltor, F. / Serrano-Lanzarote, B. / Fenollosa, E.	The post-tensioned concrete technique in the work of Eduardo Torroja. The case of the Church of San Nicolás in Gandía	518-528
Kar, Swapnasarit / Pandit, Amiya R. / Biswal, K. C.	Prediction of FRP shear contribution for wrapped shear deficient RC beams using adaptive neuro-fuzzy inference system (ANFIS)	702-717
Xu, Tengfei / Chen, Guoqing / Deng, Kailai / Chen, Limin / Li, Xiaolong / Lou, Song	Probabilistic analysis of exterior hanging scaffold strength under impact load	739-750
Rezaei Ranjbar, Parvane / Naderpour, Hosein	Probabilistic evaluation of seismic resilience for typical vital buildings in terms of vulnerability curves	314-323
Zhao, Zhongwei / Jian, Xiangyang / Liang, Bing / Liu, Haiqing	Progressive collapse assessment of friction damped post-tensioned steel frames based on a simplified model	447-458
Woldemariam, Abraham Mengesha / Oyawa, Walter O. / Nyomboi, Timothy	Reliability assessment of axially loaded uPVC tube confined reinforced concrete columns	529-538
Wu, Chenglong / Liu, Jiming / Tan, Wenya / Wang, Pengfei	Seismic behavior of composite interior joints of prefabricated H-shaped steel reinforced concrete column - steel beam	558-572
Zhao, Chunfeng / Yu, Na / Mo, Y. L.	Seismic fragility analysis of AP1000 SB considering fluid-structure interaction effects	103-110
Zhao, Yushuai / Zhang, Yingying / Xu, Junhao / Yu, Penghao / Wu, Jiamin / Deng, Shaoxiang / Song, Xiaoguang	Seismic performance of the frame-skin structure based on 3D scanning technology	789-798
Borah, Mukunda Madhab / Dey, Abhijeet / Sil, Arjun	Service life assessment of chloride affected bridge located in coastal region of India considering variation in the inherent structural parameters	191-203
Sobótka, Maciej	Shape optimization of flexible soil-steel culverts taking non-stationary loads into account	612-620
Etim, Offiong / Gand, Alfred Kofi / Saidani, Messaoud / Fom, Pam / Ganjian, Eshmaiel / Okon, Eta	Shear characterisation of pultruded superstructural FRP-concrete push-outs	254-266
Shahnewaz, Md / Rteil, Ahmad / Shahria Alam, M.	Shear strength of reinforced concrete deep beams – A review with improved model by genetic algorithm and reliability analysis	494-508
Rossi, M. / Calderini, C. / Di Napoli, B. / Cascini, L. / Portioli, F.	Structural analysis of masonry vaulted staircases through rigid block limit analysis	180-190
Guo, Hongchao / Xie, Yong / Liu, YunHe / Yang, Dixiong	Study on mechanical behavior of Q690D high strength steel bearing-type bolted connections	588-601
Ding, Fa-xing / Wang, Wen-jun / Lu, De-ren / Liu, Xue-mei	Study on the behavior of concrete-filled square double-skin steel tubular stub columns under axial loading	665-676
Padalu, Pravin Kumar Venkat Rao / Singh, Yogendra / Das, Sreekanta	Tensile properties of wire and fibre reinforced cementitious matrix composites for strengthening of masonry	164-179
Mahmood, Mohammed / Elamin, Ahmed / Tizani, Walid	Ultimate strength and fracture sequence of bolted connections to thin-walled carbon steel	646-659

About this
data sheet
IssueID
33995
Published on:
14/11/2019
Last updated on:
09/05/2022

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Structures - February 2020

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Structures - February 2020

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.