Structures - février 2020

Publié:	février 2020

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Kolawole, John Temitope / Olalusi, Oladimeji Benedict / Orimogunje, Ademola Johnson	Adhesive bond potential of compressed stabilised earth brick	812-820
Arabzadeh, Abolfazl	Analysis of boundary condition effects on RC deep beams	821-830
Ahmad, Subhan / Kumar, Ajay / Kumar, Kamal	Axial performance of GGBFS concrete filled steel tubes	539-550
Isleem, Haytham F. / Tahir, Muhammad / Wang, Zhenyu	Axial stress–strain model developed for rectangular RC columns confined with FRP wraps and anchors	779-788
Harvey, P. S. / Cain, T. M. N.	Buckling of elastic columns with initial imperfections and load eccentricity	660-664
Schanck, Andrew P. / Davids, William G.	Capacity assessment of older t-beam bridges by nonlinear proxy finite-element analysis	267-278
Arun Solomon, A. / Hemalatha, G.	Characteristics of expanded polystyrene (EPS) and its impact on mechanical and thermal performance of insulated concrete form (ICF) system	204-213
Das, R. / Steensels, R. / Dragan, D. / Vandoren, B. / Degee, H.	Characterization and optimization of a steel beam to RC wall connection for use in innovative hybrid coupled wall systems	111-125
Hung, Chung-Chan / Hsieh, Ping-Lun	Comparative study on shear failure behavior of squat high-strength steel reinforced concrete shear walls with various high-strength concrete materials	56-68
Akl, James / Alladkani, Fadi / Dumond, Patrick	Comparing and optimizing analytical, numerical and experimental vibration models for a simply-supported ribbed plate	690-701
Murali Krishna, B. / Guru Prathap Reddy, V. / Shafee, Mohammed / Tadepalli, T.	Condition assessment of RC beams using artificial neural networks	1-12
Chin, Chee-Loong / Ong, Chin-Boon / Tan, Jia-Yang / Ma, Chau-Khun / Awang, Abdullah Zawawi / Omar, Wahid	Confinement-concrete interaction in pre-tensioned partial steel-confined concrete	751-765
Li, Le / Li, Chun-Qing / Mahmoodian, Mojtaba / Shi, Wenhai	Corrosion induced degradation of fatigue strength of steel in service for 128 years	415-424
Siar Mahmood Shah, Ahmad / Moradi, Saber	Cyclic response sensitivity of energy dissipating steel plate fuses	799-811
Qi, Shijie / Shi, Pengcheng / Yan, Chun / Imran, Ali / Liu, Dong / Zhu, Yingdan / Herrmann, Axel S.	Damage model based on gradient property method for simulating the tensile behavior of composite laminates with Variable Angle Tow reinforcement	152-163
Kalemci, Elif Nur / İkizler, Sabriye Banu / Dede, Tayfun / Angin, Zekai	Design of reinforced concrete cantilever retaining wall using Grey wolf optimization algorithm	245-253
Arabshahi, Alireza / Gharaei-Moghaddam, Nima / Tavakkolizadeh, Mohammadreza	Development of applicable design models for concrete columns confined with aramid fiber reinforced polymer using Multi-Expression Programming	225-244
Mohandoss, Prabha / Pillai, Radhakrishna G. / Sengupta, Amlan K.	Effect of compressive strength of concrete on transmission length of pre-tensioned concrete systems	304-313
Eslami, Abolfazl / Moghavem, Alireza / Shayegh, Hamid R. / Ronagh, Hamid R.	Effect of FRP stitching anchors on ductile performance of shear-deficient RC beams retrofitted using FRP U-wraps	407-414
Shomali, Amir / Mostofinejad, Davood / Esfahani, Mohammad Reza	Effective strain of CFRP in RC beams strengthened in shear with NSM reinforcements	635-645
Pinto, Clemente / Fonseca, João	Effects of initial form-finding models on shape, force paths, and buckling of anti-funicular shells with free edges	472-480
Kassem, Moustafa Moufid / Nazri, Fadzli Mohamed / Farsangi, Ehsan Noroozinejad	The efficiency of an improved seismic vulnerability index under strong ground motions	366-382
Jebadurai, S. V. S. / Tensing, D. / Pradhan, P. M. / Hemalatha, G.	Enhancing performance of infill masonry with latex modified mortar subjected to cyclic load	551-557
Perumalla, Mallikarjun / Laskar, Arghadeep	Evaluation of Design Methods for Prestressed Concrete Members with Stirrups Using a New Traditional Shear Database	621-634
Vitorino, Hugo / Rodrigues, Hugo / Couto, Carlos	Evaluation of post-earthquake fire capacity of a reinforced concrete one bay plane frame under ISO fire exposure	602-611
Tong, Jing-Zhong / Pan, Wen-Hao / Pi, Yong-Lin	Exact solutions for second-order effect of imperfect beams and frames based on matrix structural analysis	677-689
Shirinkam, Mohammad Reza / Razzaghi, Javad	Experimental and analytical investigation on the behavior of metallic Box-Shaped Dampers (BSD)	766-778
Al-Kamaki, Yaman S. S. / Al-Mahaidi, Riadh / Al-Mosawe, Alaa / Bennetts, Ian	Experimental and numerical study on wrapping concrete cylinders post heating and cooling under preload using CFRP fabrics	425-436
Cavène, Edouard / Durif, Sébastien / Bouchaïr, Abdelhamid / Toussaint, Evelyne	Experimental study of slotted hole bolted cover-plate connection using full field measurement	573-587
Ababneh, Ayman N. / Al-Rousan, Rajai Z. / Ghaith, Issam M. N.	Experimental study on anchoring of FRP-strengthened concrete beams	26-33
Arabzadeh, Abolfazl / Hizaji, Rouhollah / Yang, T. Y.	Experimentally studying and development of curved STM to predict the load capacity and failure mode of fixed-ended RC deep beams	289-303
Shirai, Kazutaka / Yin, Hor / Teo, Wee	Flexural capacity prediction of composite RC members strengthened with UHPC based on existing design models	44-55
Abbass, Ahmmad A. / Abid, Sallal R. / Arna'ot, Farid H. / Al-Ameri, Raad A. / Özakça, Mustafa	Flexural response of hollow high strength concrete beams considering different size reductions	69-86
Lowe, Daniel / Roy, Krishanu / Das, Raj / Clifton, Charles G. / Lim, James B. P.	Full scale experiments on splitting behaviour of concrete slabs in steel concrete composite beams with shear stud connection	126-138
Zhang, Haiqiu / Hadi, Muhammad N. S.	Geogrid-confined pervious geopolymer concrete piles with FRP-PVC-confined concrete core: Analytical models	731-738
Faria, Ricardo / Marreiros, Rui / Ramos, António Pinho / Jesus, Catarina	Influence of the top reinforcement detailing in the behaviour of flat slabs	718-730
Amaireh, Layla / Al-Rousan, Rajai Z. / Ababneh, Ayman N. / Alhassan, Mohammad	Integration of CFRP strips as an internal shear reinforcement in reinforced concrete beams	13-19
Deng, Mingke / Ma, Fudong / Wang, Xuesong / Lu, Hao	Investigation on the shear behavior of steel reinforced NC/HDC continuous deep beam	20-25
Bandyopadhyay, Atrayee / Maurya, Kundan K. / Samanta, Amiya K.	Investigation on UPVC confined RC columns with Recycled Aggregate Concrete using C&D waste	279-288
Haghi, Nakisa / Epackachi, Siamak / Kazemi, Mohammad Taghi	Macro modeling of steel-concrete composite shear walls	383-406
Ju, Hyunjin / Lee, Deuckhang / Kim, Jong R. / Kim, Kang Su	Maximum torsional reinforcement ratio of reinforced concrete beams	481-493
Mohammed, Saif I. / Najim, Khalid B.	Mechanical strength, flexural behavior and fracture energy of Recycled Concrete Aggregate self-compacting concrete	34-43
Jensen, Keith / Al-Rubaye, Salam / Thomas, Robert J. / Maguire, Marc	Mechanics-Based model for elastic Bending, Axial, thermal Deformations, and asymmetry of concrete composite sandwich wall panels	459-471
Shadlou, Masoud / Ahmadi, Ehsan / Kashani, Mohammad Mehdi	Micromechanical modelling of mortar joints and brick-mortar interfaces in masonry Structures: A review of recent developments	831-844
Yang, T. Y. / Amani Dashlejeh, Asghar / Arabzadeh, Abolfazl / Hizaji, Rouhollah	New model for prediction of ultimate load of prestressed RC deep beams	509-517
El Kahi, Elio / Deck, Olivier / Khouri, Michel / Mehdizadeh, Rasool / Rahme, Pierre	A new simplified meta-model to evaluate the transmission of ground movements to structures integrating the elastoplastic soil behavior	324-334
Kazemi, Mostafa / Li, Jie / Lahouti Harehdasht, Salar / Yousefieh, Negin / Jahandari, Soheil / Saberian, Mohammad	Non-linear behaviour of concrete beams reinforced with GFRP and CFRP bars grouted in sleeves	87-102
Alsanat, Husam / Gunalan, Shanmuganathan / Poologanathan, Keerthan / Guan, Hong / Tsavdaridis, Konstantinos Daniel	Numerical investigation of web crippling in fastened aluminium lipped channel sections under two-flange loading conditions	351-365
Kalibhat, Madhusudan G. / Upadhyay, Akhil	Numerical study on the deformation behavior of steel concrete composite girders considering partial shear interaction	437-446
Zhang, Qingwen / Zhao, Zibin / Chen, Jianfeng / Fan, Feng / Shen, Shizhao	On the static properties and stability of 800 m long-span mega-latticed suspension structures	139-151
Zhao, Bida / Sun, Chao / Cai, Yangzheng / Liu, Chengqing	An out-of-plane bending hysteretic model for multi-planar CHS X-connections	335-350
Qi, Jianan / Ma, Zhongguo John / Wang, Jingquan / Bao, Yi	Post-cracking shear behaviour of concrete beams strengthened with externally prestresssed tendons	214-224
Arnau-Paltor, F. / Serrano-Lanzarote, B. / Fenollosa, E.	The post-tensioned concrete technique in the work of Eduardo Torroja. The case of the Church of San Nicolás in Gandía	518-528
Kar, Swapnasarit / Pandit, Amiya R. / Biswal, K. C.	Prediction of FRP shear contribution for wrapped shear deficient RC beams using adaptive neuro-fuzzy inference system (ANFIS)	702-717
Xu, Tengfei / Chen, Guoqing / Deng, Kailai / Chen, Limin / Li, Xiaolong / Lou, Song	Probabilistic analysis of exterior hanging scaffold strength under impact load	739-750
Rezaei Ranjbar, Parvane / Naderpour, Hosein	Probabilistic evaluation of seismic resilience for typical vital buildings in terms of vulnerability curves	314-323
Zhao, Zhongwei / Jian, Xiangyang / Liang, Bing / Liu, Haiqing	Progressive collapse assessment of friction damped post-tensioned steel frames based on a simplified model	447-458
Woldemariam, Abraham Mengesha / Oyawa, Walter O. / Nyomboi, Timothy	Reliability assessment of axially loaded uPVC tube confined reinforced concrete columns	529-538
Wu, Chenglong / Liu, Jiming / Tan, Wenya / Wang, Pengfei	Seismic behavior of composite interior joints of prefabricated H-shaped steel reinforced concrete column - steel beam	558-572
Zhao, Chunfeng / Yu, Na / Mo, Y. L.	Seismic fragility analysis of AP1000 SB considering fluid-structure interaction effects	103-110
Zhao, Yushuai / Zhang, Yingying / Xu, Junhao / Yu, Penghao / Wu, Jiamin / Deng, Shaoxiang / Song, Xiaoguang	Seismic performance of the frame-skin structure based on 3D scanning technology	789-798
Borah, Mukunda Madhab / Dey, Abhijeet / Sil, Arjun	Service life assessment of chloride affected bridge located in coastal region of India considering variation in the inherent structural parameters	191-203
Sobótka, Maciej	Shape optimization of flexible soil-steel culverts taking non-stationary loads into account	612-620
Etim, Offiong / Gand, Alfred Kofi / Saidani, Messaoud / Fom, Pam / Ganjian, Eshmaiel / Okon, Eta	Shear characterisation of pultruded superstructural FRP-concrete push-outs	254-266
Shahnewaz, Md / Rteil, Ahmad / Shahria Alam, M.	Shear strength of reinforced concrete deep beams – A review with improved model by genetic algorithm and reliability analysis	494-508
Rossi, M. / Calderini, C. / Di Napoli, B. / Cascini, L. / Portioli, F.	Structural analysis of masonry vaulted staircases through rigid block limit analysis	180-190
Guo, Hongchao / Xie, Yong / Liu, YunHe / Yang, Dixiong	Study on mechanical behavior of Q690D high strength steel bearing-type bolted connections	588-601
Ding, Fa-xing / Wang, Wen-jun / Lu, De-ren / Liu, Xue-mei	Study on the behavior of concrete-filled square double-skin steel tubular stub columns under axial loading	665-676
Padalu, Pravin Kumar Venkat Rao / Singh, Yogendra / Das, Sreekanta	Tensile properties of wire and fibre reinforced cementitious matrix composites for strengthening of masonry	164-179
Mahmood, Mohammed / Elamin, Ahmed / Tizani, Walid	Ultimate strength and fracture sequence of bolted connections to thin-walled carbon steel	646-659

Informations
sur cette fiche
IssueID
33995
Publié(e) le:
14.11.2019
Modifié(e) le:
09.05.2022

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Structures - février 2020

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Structures - février 2020

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.