Structural Concrete - v. 24, n. 2 (April 2023)

Published:	April 2023

Articles in this Issue

Author(s)	Title	Page(s)
Bischof, Patrick / Morf, Urias / Kaufmann, Walter	Assessment of parameters influencing the behavior of statically indeterminate reinforced concrete slabs and beams under fire conditions	2592-2605
Amario, Mayara / Pepe, Marco / Santana Rangel, Caroline / Filho, Romildo Dias Toledo	Autogenous and drying shrinkage of structural concretes incorporating recycled concrete aggregates from different sources	1780-1792
Li, Junhui / Liu, Zongchao / Deng, Jun / Chen, Fayang	Bidirectional shear behavior of stud connectors in steel‐concrete composite monorail track beams	2951-2964
Khorgade, Prathamesh / Rettinger, Martin / Burghartz, Anne / Schlaich, Mike	A comparative cradle‐to‐gate life cycle assessment of carbon fiber‐reinforced polymer and steel‐reinforced bridges	1737-1750
Helsel, Michelle A. / Rangelov, Milena / Montanari, Luca / Spragg, Robert / Carrion, Migdalia	Contextualizing embodied carbon emissions of concrete using mixture design parameters and performance metrics	1766-1779
Alotaibi, Emran / Nassif, Nadia / Barakat, Samer	Data‐driven reliability and cost‐based design optimization of steel fiber reinforced concrete suspended slabs	1856-1867
Wang, Hui / Chen, Xi / Yang, Sha / Caggiano, Antonio / Ai, Qing / Koenders, Eduardus / Yuan, Yong	A dehydration kinetic model of calcium silicate hydrates at high temperature	1997-2008
Ulas, Merve Acikgenc	Development of an artificial neural network model to predict waste marble powder demand in eco‐efficient self‐compacting concrete	2009-2022
Bischof, Patrick / Mata‐Falcón, Jaime / Ammann, Rebecca / Näsbom, Andreas / Kaufmann, Walter	Digitally fabricated weak interfaces to reduce minimum reinforcement in concrete structures	1835-1855
Deng, Yongjun / Lv, Taihong / Chen, Xiaowei	Dynamic failure behaviors of reinforced‐concrete based on the split‐Hopkinson pressure bar tests	2113-2132
Mahmoodi, Sina / Sadeghian, Pedram	Effect of different exposure conditions on the self‐healing capacity of engineered cementitious composites with crystalline admixture	2133-2144
Al‐Huri, Mohammed A. / Al‐Osta, Mohammed A. / Ahmad, Shamsad / Al‐Dulaijan, Salah U.	Effect of early‐strengthening of RC beams using UHPC layers on their performance against reinforcement corrosion	2260-2279
Arulanandam, Preethy Mary / Kanakubo, Toshiyuki / Singh, S. B. / Sivasubramanian, Madappa V. R.	Effect of ECC layer thickness and reinforcement ratio on the load carrying capacity of steel‐reinforced composite beams	2280-2306
Dong, Zhifang / Dai, Jie / Deng, Mingke	Effect of loading strain rate and short PVA fibers on the tensile mechanical performance of carbon TRM	2307-2326
Li, Ruisen / Zheng, Wenzhong / Tian, Weichen / Yan, Yu / Li, Guangchao	Effect of longitudinal reinforcement on the soundless chemical demolition degree of reinforced concrete columns	2575-2591
Liu, Royce / Palermo, Alessandro / Chiaro, Gabriele	Effect of reinforcing and crack width on the vibration damping capacity of rubberized concrete beams	2740-2754
Nguyen, Tan‐Trac / Thai, Huu‐Tai / Ngo, Tuan	Effect of steel fibers on the performance of an economical ultra‐high strength concrete	2327-2341
Karimi, Hamid Reza / Ebneabbasi, Pouyan / Shahni Karamzadeh, Nima / Khedri, Ehsan	Effect of water to cement (W/C) ratio and age on mechanical behavior of tire‐recycled steel fiber reinforced concrete	2460-2474
Wang, Qinghe / Liu, Yuting / Wang, Dong	Effects of replacement ratio and particle size distribution of recycled coarse aggregate on mechanical properties of concrete designed using equivalent mortar volume method	1821-1834
Samarakoon, S. M. Samindi M. K. / Ratnayake, R. M. Chandima	End‐of‐life solution prioritization for pre‐cast concrete components aligning with circular economy targets	1751-1765
dos Santos, Júlia Borges / Muttoni, Aurelio / Sales de Melo, Guilherme	Enhancement of the punching shear verification of slabs with openings	3021-3038
Aslam, Fahid / Zaid, Osama / Althoey, Fadi / Alyami, Saleh H. / Qaidi, Shaker M. A. / de Prado Gil, Jesús / Martínez‐García, Rebeca	Evaluating the influence of fly ash and waste glass on the characteristics of coconut fibers reinforced concrete	2440-2459
Yan, Yongming / Gao, Danying / Yang, Lin / Pang, Yuyang / Zhang, Yu	Evaluation method of shear toughness for steel fiber‐reinforced concrete containing recycled coarse aggregate	2879-2893
Li, Zhihua / Ma, Chengfei / Guo, Xuan	Experimental and analytical study of the flexural behavior of basalt fiber‐reinforced concrete beams	2342-2362
Frančić Smrkić, Marina / Damjanović, Domagoj / Baričević, Ana / Uros, Mario	Experimental and numerical analysis of concrete slabs reinforced with rebar and recycled steel fibers from waste car tyres	1807-1820
Hamoda, Ahmed / Ahmed, Mizan / Sennah, Khaled	Experimental and numerical investigations of the effectiveness of engineered cementitious composites and stainless steel plates in shear strengthening of reinforced concrete beams	2778-2799
Chen, Lianjun / Zhao, Jipeng / Meng, Xiangrui / Liu, Zhaoxia / Liu, Guoming	Experimental evaluation on mechanical and thermal insulation properties of shotcrete under constant‐variable temperature	2041-2056
Zhang, Yong / Qing, Yuan / Wang, Chun‐Lin / Zeng, Bin	Experimental investigation of a locally prestressed precast concrete wall	2721-2739
Gong, Xu / Yu, Hongfa / Wu, Chengyou	Experimental study on the correlation between mechanical properties of concrete and interface strength of coarse aggregate mortar under freezing–thawing	2023-2040
Wang, Xinqi / Tian, Shuai / Sun, Bo / Zhang, Xiaotao / Zhang, Zhongwei	Flexural performance of mortise–tenon wet joints in prefabricated ribbed beam bridges	1793-1806
Pavlu, Tereza / Fořtová, Kristina / Mariaková, Diana / Řepka, Jakub / Vlach, Tomáš / Hájek, Petr	High‐performance concrete with fine recycled concrete aggregate: Experimental assessment	1868-1878
Kasuga, Akio	Impact of carbon neutrality on structural concrete—Not a risk but an opportunity	1725-1736
Jirawattanasomkul, Tidarut / Tongmanee, Pongsakorn / Jongvivatsakul, Pitcha / Likitlersuang, Suched	Improving shear deficiency of prestressed concrete sleepers by crack resisting stirrups	2894-2910
Foster, Stephen	The Inestimable Challenge	1718-1719
Autrup, Frederik / Jørgensen, Henrik Brøner / Cao Hoang, Linh	The influence of small amounts of shear reinforcement on the shear‐transferring mechanisms in RC beams: An analysis based on refined experimental measurements	2844-2861
Farwig, Kristina / Schulte‐Schrepping, Christoph / Curbach, Manfred / Breitenbücher, Rolf	Investigation on the crack formation in carbon concrete for the use in deck caps on cantilever slabs of bridges	2563-2574
Turk, Kazim / Bassurucu, Mahmut	An investigation on the effect of hybrid fiber reinforced on the flexural behavior of RC beams having different lap‐spliced lengths	2515-2527
Zerin, Arifa Iffat / Kasuga, Akio	Life cycle assessment of next generation non‐metallic bridges	1914-1931
Esmaeili, Jamshid / Ghaffarinia, Mahdi / Nodehi, Mehrab / Gencel, Osman / Shi, Jinyan / Ozbakkaloglu, Togay	Mechanical and fractural characteristics of structural lightweight fiber reinforced concrete	2420-2439
Fu, Qian / Xue, Gang / Xu, Sheng / Li, Jingjun / Dong, Wei	Mechanical performance, microstructure, and damage model of concrete containing steel slag aggregate	2189-2207
Li, Zeya / Sheikh, M. Neaz / Feng, Hu / Hadi, Muhammad N. S.	Mechanical properties of ambient cured fly ash‐slag‐based engineered geopolymer composites with different types of fibers	2363-2383
Jin, Liu / Wang, Zhongshiyu / Zhu, Huajie / Li, Dong / Du, Xiuli	Meso‐scale modeling of size effect on pure torsional failure of concrete‐filled steel tubular columns	3039-3054
Zhang, Yingda / Afroz, Sumaiya / Nguyen, Quang Dieu / Kim, Taehwan / Castel, Arnaud / Xu, Tengfei	Modeling blended cement concrete tensile creep for standard ring test application	2170-2188
Shakr Piro, Nzar / Mohammed, Ahmed Salih / Hamad, Samir M. / Kurda, Rawaz / Qader, Bootan S.	Multifunctional computational models to predict the long‐term compressive strength of concrete incorporated with waste steel slag	2093-2112
He, Yaobei / Qiu, Minghong / Zhao, Xudong / Li, Panpan / Shao, Xudong	Negative moment cracking control method of continuous Steel‐Concrete composite girder bridge based on UHPFRC thin layers	1720-1722
Dinh, Phuoc Tho / Doh, Jeung‐Hwan / Fragomeni, Sam / Ho, Nhat Minh / Peters, Tim	Numerical modeling techniques and investigation into the flexural behavior of two‐way posttensioned concrete slabs with profiled steel sheeting	2674-2698
Olsson, Jens / Ander, Mats / Williams, Chris J. K.	The numerical simulation of standard concrete tests and steel reinforcement using force flux peridynamics	2071-2092
Jin, Liu / Miao, Liyue / Du, Xiuli	Numerical study on shear capacity of geometrically similar RC interior beam‐column joints	3002-3020
Adam, Viviane / Schmidt, Maximilian / Hegger, Josef	One‐way flexural shear tests on wide reinforced concrete slab segments with simple and intermediate supports	2911-2929
Bao, Sihai / Zhang, Yafang / Liu, Hao / Zeng, Ke / Zhang, Weijian	Optimization design of functionally graded ultra‐high performance cementitious composite on flexural behavior	2245-2259
Rasouli, Mahsa / Shiravand, Mahmoud R. / Ardakani, Reza Rasti	Performance‐based design method for isolated hollow RC piers with irregularity in height	2490-2514
Pan, Lei / Wang, Yuanfeng / Li, Kai / Guo, Xiaohui	Predicting compressive strength of green concrete using hybrid artificial neural network with genetic algorithm	1980-1996
Rong, Xian / Liu, Yinbo / Chen, Pang / Lv, Xueyuan / Shen, Chen / Yao, Boqiang	Prediction of creep of recycled aggregate concrete using back‐propagation neural network and support vector machine	2229-2244
Kormošová, Ľudmila / Halvonik, Jaroslav	Punching shear behavior of flat slabs supported by elongated columns with openings	2930-2950
Siqueira, João P. A. / Sales de Melo, Guilherme	Punching shear in flat slabs with open stirrups as shear reinforcement	2827-2843
Berger, Johannes / Haller, Daniel	Redistribution of internal forces from the span to the support	2662-2673
Slobbe, Arthur / Rózsás, Árpád / Yang, Yuguang	Reliability‐based calibration of design code formulas: Application to shear resistance formulas for reinforced concrete members without shear reinforcement	2979-3001
Chen, Wei / Peng, Linxin / Yang, Haifeng / He, Xingchuan	Residual fracture energy of natural and recycled aggregate concrete after exposure to high temperatures	1879-1892
Accornero, Federico / Cafarelli, Renato / Carpinteri, Alberto / Nanni, Antonio	Scale effects in GFRP‐bar reinforced concrete beams	2817-2826
Hillebrand, Matthias / Hegger, Josef	Shear and interface shear of semi‐precast slabs with lattice girders under monotonic loading	3055-3076
Ke, Lu / Liang, Longming / Zhou, Jiale / Li, Cong / Li, Youlin / Chen, Can	Shear performance of stirrup corroded RC beams: Effects of strengthening interventions and corrosion rates	3077-3090
Anwar, Zeshan / Siddique, Iffat / Irfan‐ul‐Hassan, Muhammad / Akmal, Usman / Sahar, Umbreen‐Us / Qureshi, Hisham Jahangir	Shear response evaluation of sustainable self‐compacting concrete made up of recycled steel fibers of waste tyres	2965-2978
Yaqub, Muhammad Arslan / Czaderski, Christoph / Matthys, Stijn	Shear strengthening of precast prestressed I‐girders using carbon fiber reinforced polymers and in‐fill concrete blocks	3091-3108
Vestergaard, Daniel / Poulsen, Peter Noe / Cao Hoang, Linh / Larsen, Kasper Paaske / Feddersen, Bent	A shell element for design‐oriented elasto‐plastic analysis of reinforced concrete wall structures using convex optimization	2606-2622
Guler, Soner / Akbulut, Zehra Funda	The single and hybrid use of steel and basalt fibers on high‐temperature resistance of sustainable ultra‐high performance geopolymer cement mortars	2402-2419
Pecić, Nenad / Mašović, Snežana / Stošić, Saša	Span‐to‐depth ratio limits for deflection control of reinforced concrete elements	2547-2562
Sharghi, Mohammad / Afshin, Hassan / Chakeri, Hamid / Dias, Daniel / Török, Ákos	Structural and environmental performance of recycled steel fiber reinforced concrete segment under the thrust force of the tunnel boring machine jacks	2638-2661
Maraş, Müslüm Murat / Kantarcı, Fatih	Structural behavior of RC beams strengthened using fiber‐reinforced polymer U‐jackets	2384-2401
Huber, Tobias / Burger, Joris / Mata‐Falcón, Jaime / Kaufmann, Walter	Structural design and testing of material optimized ribbed RC slabs with 3D printed formwork	1932-1955
Simwanda, Lenganji / De Koker, Nico / Viljoen, Celeste / Babafemi, Adewumi John	Structural reliability of ultra‐high‐performance fiber reinforced concrete beams in shear	2862-2878
Kulkarni, Abhijit / Shafei, Behrouz / Epackachi, Siamak	Structural response assessment of ultra‐high performance concrete shear walls under cyclic lateral loads	2699-2720
Lee, Seunghye / Nguyen, Ngoc‐Hien / Karamanli, Armagan / Lee, Jaehong / Vo, Thuc P.	Super learner machine‐learning algorithms for compressive strength prediction of high performance concrete	2208-2228
Marinković, Snežana / Josa, Irene / Braymand, Sandrine / Tošić, Nikola	Sustainability assessment of recycled aggregate concrete structures: A critical view on the current state‐of‐knowledge and practice	1956-1979
Regúlez, Borja / Faria, Duarte M. V. / Todisco, Leonardo / Ruiz, Miguel Fernández / Corres, Hugo	Sustainability in construction: The urgent need for a new ethics	1893-1913
Hiesch, Dominik / Proske, Tilo / Graubner, Carl‐Alexander / Bujotzek, Lukas / Ghadioui, Redouan El	Theoretical and experimental investigation of the time‐dependent relaxation rates of GFRP and BFRP reinforcement bars	2800-2816
Konertz, Dustin / Mahrenholtz, Christoph / Mark, Peter	Three‐dimensional testing of fasteners	2623-2637
Wang, Zhe / Feng, Mingyu / Zhang, Yanbin	Triaxial compression test study on the influence of single crack on the mechanical properties of reactive powder concrete	2057-2070
Zhao, Weijian / Bao, Jiawen / Gao, Qiang / Yang, Yuanzhang	Uniaxial tensile tests and refined finite element analyses of the grouted welded rib sleeve connections	2755-2777
Zaborac, Jarrod / Bayrak, Oguzhan	Unified approach for reinforcement development length using the partly cracked elastic stage for bond strength	2528-2546

About this
data sheet
IssueID
69856
Published on:
30/05/2023
Last updated on:
30/05/2023

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Structural Concrete - v. 24, n. 2 (April 2023)

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Structural Concrete - v. 24, n. 2 (April 2023)

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.