Structural Concrete - v. 24, n. 2 (avril 2023)

Publié:	avril 2023

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Bischof, Patrick / Morf, Urias / Kaufmann, Walter	Assessment of parameters influencing the behavior of statically indeterminate reinforced concrete slabs and beams under fire conditions	2592-2605
Amario, Mayara / Pepe, Marco / Santana Rangel, Caroline / Filho, Romildo Dias Toledo	Autogenous and drying shrinkage of structural concretes incorporating recycled concrete aggregates from different sources	1780-1792
Li, Junhui / Liu, Zongchao / Deng, Jun / Chen, Fayang	Bidirectional shear behavior of stud connectors in steel‐concrete composite monorail track beams	2951-2964
Khorgade, Prathamesh / Rettinger, Martin / Burghartz, Anne / Schlaich, Mike	A comparative cradle‐to‐gate life cycle assessment of carbon fiber‐reinforced polymer and steel‐reinforced bridges	1737-1750
Helsel, Michelle A. / Rangelov, Milena / Montanari, Luca / Spragg, Robert / Carrion, Migdalia	Contextualizing embodied carbon emissions of concrete using mixture design parameters and performance metrics	1766-1779
Alotaibi, Emran / Nassif, Nadia / Barakat, Samer	Data‐driven reliability and cost‐based design optimization of steel fiber reinforced concrete suspended slabs	1856-1867
Wang, Hui / Chen, Xi / Yang, Sha / Caggiano, Antonio / Ai, Qing / Koenders, Eduardus / Yuan, Yong	A dehydration kinetic model of calcium silicate hydrates at high temperature	1997-2008
Ulas, Merve Acikgenc	Development of an artificial neural network model to predict waste marble powder demand in eco‐efficient self‐compacting concrete	2009-2022
Bischof, Patrick / Mata‐Falcón, Jaime / Ammann, Rebecca / Näsbom, Andreas / Kaufmann, Walter	Digitally fabricated weak interfaces to reduce minimum reinforcement in concrete structures	1835-1855
Deng, Yongjun / Lv, Taihong / Chen, Xiaowei	Dynamic failure behaviors of reinforced‐concrete based on the split‐Hopkinson pressure bar tests	2113-2132
Mahmoodi, Sina / Sadeghian, Pedram	Effect of different exposure conditions on the self‐healing capacity of engineered cementitious composites with crystalline admixture	2133-2144
Al‐Huri, Mohammed A. / Al‐Osta, Mohammed A. / Ahmad, Shamsad / Al‐Dulaijan, Salah U.	Effect of early‐strengthening of RC beams using UHPC layers on their performance against reinforcement corrosion	2260-2279
Arulanandam, Preethy Mary / Kanakubo, Toshiyuki / Singh, S. B. / Sivasubramanian, Madappa V. R.	Effect of ECC layer thickness and reinforcement ratio on the load carrying capacity of steel‐reinforced composite beams	2280-2306
Dong, Zhifang / Dai, Jie / Deng, Mingke	Effect of loading strain rate and short PVA fibers on the tensile mechanical performance of carbon TRM	2307-2326
Li, Ruisen / Zheng, Wenzhong / Tian, Weichen / Yan, Yu / Li, Guangchao	Effect of longitudinal reinforcement on the soundless chemical demolition degree of reinforced concrete columns	2575-2591
Liu, Royce / Palermo, Alessandro / Chiaro, Gabriele	Effect of reinforcing and crack width on the vibration damping capacity of rubberized concrete beams	2740-2754
Nguyen, Tan‐Trac / Thai, Huu‐Tai / Ngo, Tuan	Effect of steel fibers on the performance of an economical ultra‐high strength concrete	2327-2341
Karimi, Hamid Reza / Ebneabbasi, Pouyan / Shahni Karamzadeh, Nima / Khedri, Ehsan	Effect of water to cement (W/C) ratio and age on mechanical behavior of tire‐recycled steel fiber reinforced concrete	2460-2474
Wang, Qinghe / Liu, Yuting / Wang, Dong	Effects of replacement ratio and particle size distribution of recycled coarse aggregate on mechanical properties of concrete designed using equivalent mortar volume method	1821-1834
Samarakoon, S. M. Samindi M. K. / Ratnayake, R. M. Chandima	End‐of‐life solution prioritization for pre‐cast concrete components aligning with circular economy targets	1751-1765
dos Santos, Júlia Borges / Muttoni, Aurelio / Sales de Melo, Guilherme	Enhancement of the punching shear verification of slabs with openings	3021-3038
Aslam, Fahid / Zaid, Osama / Althoey, Fadi / Alyami, Saleh H. / Qaidi, Shaker M. A. / de Prado Gil, Jesús / Martínez‐García, Rebeca	Evaluating the influence of fly ash and waste glass on the characteristics of coconut fibers reinforced concrete	2440-2459
Yan, Yongming / Gao, Danying / Yang, Lin / Pang, Yuyang / Zhang, Yu	Evaluation method of shear toughness for steel fiber‐reinforced concrete containing recycled coarse aggregate	2879-2893
Li, Zhihua / Ma, Chengfei / Guo, Xuan	Experimental and analytical study of the flexural behavior of basalt fiber‐reinforced concrete beams	2342-2362
Frančić Smrkić, Marina / Damjanović, Domagoj / Baričević, Ana / Uros, Mario	Experimental and numerical analysis of concrete slabs reinforced with rebar and recycled steel fibers from waste car tyres	1807-1820
Hamoda, Ahmed / Ahmed, Mizan / Sennah, Khaled	Experimental and numerical investigations of the effectiveness of engineered cementitious composites and stainless steel plates in shear strengthening of reinforced concrete beams	2778-2799
Chen, Lianjun / Zhao, Jipeng / Meng, Xiangrui / Liu, Zhaoxia / Liu, Guoming	Experimental evaluation on mechanical and thermal insulation properties of shotcrete under constant‐variable temperature	2041-2056
Zhang, Yong / Qing, Yuan / Wang, Chun‐Lin / Zeng, Bin	Experimental investigation of a locally prestressed precast concrete wall	2721-2739
Gong, Xu / Yu, Hongfa / Wu, Chengyou	Experimental study on the correlation between mechanical properties of concrete and interface strength of coarse aggregate mortar under freezing–thawing	2023-2040
Wang, Xinqi / Tian, Shuai / Sun, Bo / Zhang, Xiaotao / Zhang, Zhongwei	Flexural performance of mortise–tenon wet joints in prefabricated ribbed beam bridges	1793-1806
Pavlu, Tereza / Fořtová, Kristina / Mariaková, Diana / Řepka, Jakub / Vlach, Tomáš / Hájek, Petr	High‐performance concrete with fine recycled concrete aggregate: Experimental assessment	1868-1878
Kasuga, Akio	Impact of carbon neutrality on structural concrete—Not a risk but an opportunity	1725-1736
Jirawattanasomkul, Tidarut / Tongmanee, Pongsakorn / Jongvivatsakul, Pitcha / Likitlersuang, Suched	Improving shear deficiency of prestressed concrete sleepers by crack resisting stirrups	2894-2910
Foster, Stephen	The Inestimable Challenge	1718-1719
Autrup, Frederik / Jørgensen, Henrik Brøner / Cao Hoang, Linh	The influence of small amounts of shear reinforcement on the shear‐transferring mechanisms in RC beams: An analysis based on refined experimental measurements	2844-2861
Farwig, Kristina / Schulte‐Schrepping, Christoph / Curbach, Manfred / Breitenbücher, Rolf	Investigation on the crack formation in carbon concrete for the use in deck caps on cantilever slabs of bridges	2563-2574
Turk, Kazim / Bassurucu, Mahmut	An investigation on the effect of hybrid fiber reinforced on the flexural behavior of RC beams having different lap‐spliced lengths	2515-2527
Zerin, Arifa Iffat / Kasuga, Akio	Life cycle assessment of next generation non‐metallic bridges	1914-1931
Esmaeili, Jamshid / Ghaffarinia, Mahdi / Nodehi, Mehrab / Gencel, Osman / Shi, Jinyan / Ozbakkaloglu, Togay	Mechanical and fractural characteristics of structural lightweight fiber reinforced concrete	2420-2439
Fu, Qian / Xue, Gang / Xu, Sheng / Li, Jingjun / Dong, Wei	Mechanical performance, microstructure, and damage model of concrete containing steel slag aggregate	2189-2207
Li, Zeya / Sheikh, M. Neaz / Feng, Hu / Hadi, Muhammad N. S.	Mechanical properties of ambient cured fly ash‐slag‐based engineered geopolymer composites with different types of fibers	2363-2383
Jin, Liu / Wang, Zhongshiyu / Zhu, Huajie / Li, Dong / Du, Xiuli	Meso‐scale modeling of size effect on pure torsional failure of concrete‐filled steel tubular columns	3039-3054
Zhang, Yingda / Afroz, Sumaiya / Nguyen, Quang Dieu / Kim, Taehwan / Castel, Arnaud / Xu, Tengfei	Modeling blended cement concrete tensile creep for standard ring test application	2170-2188
Shakr Piro, Nzar / Mohammed, Ahmed Salih / Hamad, Samir M. / Kurda, Rawaz / Qader, Bootan S.	Multifunctional computational models to predict the long‐term compressive strength of concrete incorporated with waste steel slag	2093-2112
He, Yaobei / Qiu, Minghong / Zhao, Xudong / Li, Panpan / Shao, Xudong	Negative moment cracking control method of continuous Steel‐Concrete composite girder bridge based on UHPFRC thin layers	1720-1722
Dinh, Phuoc Tho / Doh, Jeung‐Hwan / Fragomeni, Sam / Ho, Nhat Minh / Peters, Tim	Numerical modeling techniques and investigation into the flexural behavior of two‐way posttensioned concrete slabs with profiled steel sheeting	2674-2698
Olsson, Jens / Ander, Mats / Williams, Chris J. K.	The numerical simulation of standard concrete tests and steel reinforcement using force flux peridynamics	2071-2092
Jin, Liu / Miao, Liyue / Du, Xiuli	Numerical study on shear capacity of geometrically similar RC interior beam‐column joints	3002-3020
Adam, Viviane / Schmidt, Maximilian / Hegger, Josef	One‐way flexural shear tests on wide reinforced concrete slab segments with simple and intermediate supports	2911-2929
Bao, Sihai / Zhang, Yafang / Liu, Hao / Zeng, Ke / Zhang, Weijian	Optimization design of functionally graded ultra‐high performance cementitious composite on flexural behavior	2245-2259
Rasouli, Mahsa / Shiravand, Mahmoud R. / Ardakani, Reza Rasti	Performance‐based design method for isolated hollow RC piers with irregularity in height	2490-2514
Pan, Lei / Wang, Yuanfeng / Li, Kai / Guo, Xiaohui	Predicting compressive strength of green concrete using hybrid artificial neural network with genetic algorithm	1980-1996
Rong, Xian / Liu, Yinbo / Chen, Pang / Lv, Xueyuan / Shen, Chen / Yao, Boqiang	Prediction of creep of recycled aggregate concrete using back‐propagation neural network and support vector machine	2229-2244
Kormošová, Ľudmila / Halvonik, Jaroslav	Punching shear behavior of flat slabs supported by elongated columns with openings	2930-2950
Siqueira, João P. A. / Sales de Melo, Guilherme	Punching shear in flat slabs with open stirrups as shear reinforcement	2827-2843
Berger, Johannes / Haller, Daniel	Redistribution of internal forces from the span to the support	2662-2673
Slobbe, Arthur / Rózsás, Árpád / Yang, Yuguang	Reliability‐based calibration of design code formulas: Application to shear resistance formulas for reinforced concrete members without shear reinforcement	2979-3001
Chen, Wei / Peng, Linxin / Yang, Haifeng / He, Xingchuan	Residual fracture energy of natural and recycled aggregate concrete after exposure to high temperatures	1879-1892
Accornero, Federico / Cafarelli, Renato / Carpinteri, Alberto / Nanni, Antonio	Scale effects in GFRP‐bar reinforced concrete beams	2817-2826
Hillebrand, Matthias / Hegger, Josef	Shear and interface shear of semi‐precast slabs with lattice girders under monotonic loading	3055-3076
Ke, Lu / Liang, Longming / Zhou, Jiale / Li, Cong / Li, Youlin / Chen, Can	Shear performance of stirrup corroded RC beams: Effects of strengthening interventions and corrosion rates	3077-3090
Anwar, Zeshan / Siddique, Iffat / Irfan‐ul‐Hassan, Muhammad / Akmal, Usman / Sahar, Umbreen‐Us / Qureshi, Hisham Jahangir	Shear response evaluation of sustainable self‐compacting concrete made up of recycled steel fibers of waste tyres	2965-2978
Yaqub, Muhammad Arslan / Czaderski, Christoph / Matthys, Stijn	Shear strengthening of precast prestressed I‐girders using carbon fiber reinforced polymers and in‐fill concrete blocks	3091-3108
Vestergaard, Daniel / Poulsen, Peter Noe / Cao Hoang, Linh / Larsen, Kasper Paaske / Feddersen, Bent	A shell element for design‐oriented elasto‐plastic analysis of reinforced concrete wall structures using convex optimization	2606-2622
Guler, Soner / Akbulut, Zehra Funda	The single and hybrid use of steel and basalt fibers on high‐temperature resistance of sustainable ultra‐high performance geopolymer cement mortars	2402-2419
Pecić, Nenad / Mašović, Snežana / Stošić, Saša	Span‐to‐depth ratio limits for deflection control of reinforced concrete elements	2547-2562
Sharghi, Mohammad / Afshin, Hassan / Chakeri, Hamid / Dias, Daniel / Török, Ákos	Structural and environmental performance of recycled steel fiber reinforced concrete segment under the thrust force of the tunnel boring machine jacks	2638-2661
Maraş, Müslüm Murat / Kantarcı, Fatih	Structural behavior of RC beams strengthened using fiber‐reinforced polymer U‐jackets	2384-2401
Huber, Tobias / Burger, Joris / Mata‐Falcón, Jaime / Kaufmann, Walter	Structural design and testing of material optimized ribbed RC slabs with 3D printed formwork	1932-1955
Simwanda, Lenganji / De Koker, Nico / Viljoen, Celeste / Babafemi, Adewumi John	Structural reliability of ultra‐high‐performance fiber reinforced concrete beams in shear	2862-2878
Kulkarni, Abhijit / Shafei, Behrouz / Epackachi, Siamak	Structural response assessment of ultra‐high performance concrete shear walls under cyclic lateral loads	2699-2720
Lee, Seunghye / Nguyen, Ngoc‐Hien / Karamanli, Armagan / Lee, Jaehong / Vo, Thuc P.	Super learner machine‐learning algorithms for compressive strength prediction of high performance concrete	2208-2228
Marinković, Snežana / Josa, Irene / Braymand, Sandrine / Tošić, Nikola	Sustainability assessment of recycled aggregate concrete structures: A critical view on the current state‐of‐knowledge and practice	1956-1979
Regúlez, Borja / Faria, Duarte M. V. / Todisco, Leonardo / Ruiz, Miguel Fernández / Corres, Hugo	Sustainability in construction: The urgent need for a new ethics	1893-1913
Hiesch, Dominik / Proske, Tilo / Graubner, Carl‐Alexander / Bujotzek, Lukas / Ghadioui, Redouan El	Theoretical and experimental investigation of the time‐dependent relaxation rates of GFRP and BFRP reinforcement bars	2800-2816
Konertz, Dustin / Mahrenholtz, Christoph / Mark, Peter	Three‐dimensional testing of fasteners	2623-2637
Wang, Zhe / Feng, Mingyu / Zhang, Yanbin	Triaxial compression test study on the influence of single crack on the mechanical properties of reactive powder concrete	2057-2070
Zhao, Weijian / Bao, Jiawen / Gao, Qiang / Yang, Yuanzhang	Uniaxial tensile tests and refined finite element analyses of the grouted welded rib sleeve connections	2755-2777
Zaborac, Jarrod / Bayrak, Oguzhan	Unified approach for reinforcement development length using the partly cracked elastic stage for bond strength	2528-2546

Informations
sur cette fiche
IssueID
69856
Publié(e) le:
30.05.2023
Modifié(e) le:
30.05.2023

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Structural Concrete - v. 24, n. 2 (avril 2023)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Structural Concrete - v. 24, n. 2 (avril 2023)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.