Rakenteiden Mekaniikka = Journal of Structural Mechanics - v. 50, n. 3 (August 2017)
| Published: | August 2017 |
|---|
Articles in this Issue
| Author(s) | Title | Page(s) |
|---|---|---|
| Aho, Jukka / Frondelius, Tero | Analyzing 3 TB Field Measurement Data Set | 224-228 |
| Fathipour Azar, Hadi / Saksala, Timo / Jalali, Seyed-Mohammad Esmaiel | Artificial neural networks models for rate of penetration prediction in rock drilling | 252-255 |
| Väntänen, Miikka / Vaara, Joona / Aho, Jukka / Kemppainen, Jukka / Frondelius, Tero | Bayesian Sequential Experimental Design for Fatigue Tests | 201-205 |
| Vaara, Joona / Mäntylä, Antti / Frondelius, Tero | Brief review on high-cycle fatigue with focus on non-metallic inclusions and forming | 146-152 |
| Heilala, Johannes / Kuivaniemi, Teemu / Könnö, Juho / Frondelius, Tero | Concept Calculation Tool for Dynamics of Generator Set Common Baseframe | 353-356 |
| Vuotikka, Antti-Jussi / Nyberg, Mikael / Karhinen, Heikki / Frondelius, Tero | Contact Sealing Simulation of High Pressured Diesel Injector | 313-317 |
| Halla-aho, Pasi / Mäntylä, Antti / Frondelius, Tero / Helander, Tommi / Hautala, Juha | Counterweight Measurements Device Development | 318-322 |
| Cattarinussi, Massimo / Leppänen, Anton / Könnö, Juho / Frondelius, Tero | Cylinder Head Design of Experiment by using the Wartsila Digital Design Platform | 330-332 |
| Komi, Erin / Kokkonen, Petteri | Design approaches for additive manufactured components, with a focus on selective laser melting | 279-282 |
| Kuivaniemi, Teemu / Mäntylä, Antti / Väisänen, Ilkka / Korpela, Antti / Frondelius, Tero | Dynamic Gear Wheel Simulations using Multibody Dynamics | 287-291 |
| Bai, Liang / Kuivaniemi, Teemu / Halla-aho, Pasi / Frondelius, Tero | Elastohydrodynamic simulation of the slider bearing | 283-286 |
| Dabiri, Mohammad / Ghafouri, Mehran / Björk, Timo | Estimation of stress concentration factors in butt and T-welded joints using artificial neural network-based models | 362-367 |
| Niemi, Antti H. / Koskela, Jani / Fedorik, Filip | Evaluation of some harmonic load models for the vibration analysis of footbridges | 127-130 |
| Nyberg, Mikael / Mäntylä, Antti / Frondelius, Tero | Explosion simulation of pressurized components | 198-200 |
| Niva, Juho Eemeli | Fretting-säröjen etenemisen tutkiminen murtumis-mekaniikan avulla | 186-190 |
| Korhonen, Jussi / Mäntylä, Antti / Könnö, Juho / Frondelius, Tero | Full scale fatigue testing of crankshaft | 166-170 |
| Raiskila, Markku / Tuikka, Joona | IFC-tiedostomuodon käyttö FEM-mallinnuksessa | 244-251 |
| Garifullin, Marsel / Pajunen, Sami / Mela, Kristo / Heinisuo, Markku | Initial rotational stiffness of tubular joints with axial force in chord | 309-312 |
| Niiranen, Jarkko / Khakalo, Sergei / Balobanov, Viacheslav | Isogeometric finite element analysis of mode I cracks within strain gradient elasticity | 337-340 |
| Frondelius, Tero / Aho, Jukka | JuliaFEM - open source solver for both industrial and academia usage | 229-233 |
| Tiainen, Teemu / Mela, Kristo | Kaksivaiheinen menettely epälineaarisen diskreetin teräsrakenteiden optimointitehtävän ratkaisemiseksi | 118-121 |
| Ahola, Antti Santeri / Mettänen, Heli / Björk, Timo | Kuormitustavan ja symmetrisyyden vaikutus kuormaa kantamattomien hitsausliitosten väsymiseen – tehollisen lovijännityksen ja murtumismekaniikan menetelmien vertailu | 153-157 |
| Göös, Jussi / Leppänen, Anton / Mäntylä, Antti / Frondelius, Tero | Large Bore Connecting Rod Simulations | 275-278 |
| Mäntylä, Antti / Göös, Jussi / Leppänen, Anton / Frondelius, Tero | Large bore engine connecting rod fretting analysis | 239-243 |
| Keränen, Janne / Ponomarev, Pavel / Sathyan, Sabin / Kataja, Juhani / Belahcen, Anouar | Magneto-structural simulation of an induction motor start-up using nodal magnetic forces in Elmer | 296-299 |
| Burdiel, Diana / Pestelli, Carlo / Almerigogna, Moreno / Pettirosso, Alan / Mikonaho, Heikki / Kuivaniemi, Teemu / Frondelius, Tero | Matching simulated and measured eigen frequencies of medium speed diesel engine | 206-210 |
| Väisänen, Ilkka / Mäntylä, Antti / Korpela, Antti / Kuivaniemi, Teemu / Frondelius, Tero | Medium Speed Engine Crankshaft Analysis | 341-344 |
| Laukkanen, Anssi / Lindroos, Matti / Andersson, Tom / Verho, Tuukka / Pinomaa, Tatu | Micromechanical modeling of failure behavior of metallic materials | 271-274 |
| Sippola, Merja Kaarina / Laukkanen, Anssi / Andersson, Tom / Lindroos, Matti | Microstructural modelling of materials | 256-260 |
| Danaee, Saivash / Kouhia, Reijo / Rasilo, Paavo / Beloahcen, Anouar / Singh, Deepak / Ristinmaa, Matti | A model for magneto-elastic behaviour | 349-352 |
| Rapo, Marja / Aho, Jukka / Frondelius, Tero | Natural Frequency Calculations with JuliaFEM | 300-303 |
| Jussila, Joonas / Holopainen, Sami / Kaarakka, Terhi / Kouhia, Reijo / Mäkinen, Jari / Orelma, Heikki / Saabye Ottosen, Niels / Ristinmaa, Matti / Saksala, Timo | A new paradigm for fatigue analysis - evolution equation based continuum approach | 333-336 |
| Kumpula, Asko / Vaara, Joona / Leppänen, Anton / Frondelius, Tero | Nodular Cast Iron ONERA Fatigue Model Fitting | 179-181 |
| Hintikka, Jouko / Juoksukangas, Janne / Lehtovaara, Arto / Frondelius, Tero / Mäntylä, Antti | Non-idealities in fretting contacts | 171-174 |
| Saksala, Timo | Numerical modelling of rock materials with polygonal finite elements | 216-219 |
| Jármai, Károly | Optimum design of welded structures | 326-329 |
| Gustafsson, Tom / Stenberg, Rolf / Videman, Juha | A posteriori analysis of classical plate elements | 141-145 |
| Singh, Deepak / Mökkönen, Kati / Poutala, Jarmo / Rasilo, Paavo / Belahcen, Anouar / Kouhia, Reijo | Preliminary results on the effect of plastic deformation on magnetic properties | 372-375 |
| Keski-Rahkonen, Joni | Probabilistic Framework for Product Design Optimization | 122-126 |
| Korhonen, Jussi / Kuoppala, Juha / Väntänen, Miikka / Vaara, Joona / Turunen, Mikko / Kämäräinen, Panu / Laine, Jarkko / Silvonen, Aulis / Frondelius, Tero | QT steel High Cycle Fatigue Testing with Ultrasonic | 304-308 |
| Taipale, Juhani | Rakennejärjestelmän toisen asteen tekijöiden luotettavuusteoreettinen yhteisvaikutusanalyysi | 357-361 |
| Salmenperä, Pekka Juhani / Hildebrand, Robert / Varis, Riku | Ratapenkereen värähtelyriski nopeuden noustessa | 211-215 |
| Chowdhury, Juan / Kumar, Gaurav / Kalita, Karuna / Tammi, Kari / Kakoty, Sashindra K. | A review on linear switched reluctance motor | 261-270 |
| Jokinen, Jarno / Kanerva, Mikko | Sensitivity analysis for simulated testing of composites: mapping via Isight and Abaqus | 191-197 |
| Malinen, Mika | Shell finite elements, with emphasis on strategies used within Elmer software | 162-165 |
| Their, Tomas / St-Pierre, Luc | Stiffness and strength of a semi-regular lattice | 137-140 |
| Moilanen, Seppo / Lehtinen, Ville | Suurikaliiperisten aseiden tuliputkien pyörrevirta-tarkastuksen ja ultraäänitarkastuksen mekanisoinnin kehitys ja toteutus | 114-117 |
| Hintikka, Jouko / Lehtovaara, Arto / Frondelius, Tero / Mäntylä, Antti | Tangential traction instability in fretting contact below fully developed friction load | 175-178 |
| Leppänen, Anton / Kumpula, Asko / Vaara, Joona / Cattarinussi, Massimo / Könnö, Juho / Frondelius, Tero | Thermomechanical Fatigue Analysis of Cylinder Head | 182-185 |
| Kiseleva, Evgeniya / Könnö, Juho / Luiljenfeldt, Niclas / Kuivaniemi, Teemu / Frondelius, Tero | Topology Optimisation of In-line Engine Turbocharger Bracket | 323-325 |
| Turkkila, Timo | Topology optimization of cast iron parts | 368-371 |
| Valkonen, Ilkka / Valkonen, Antti | Tuotantokäyttöön soveltuva edullinen menetelmä hitsin juuren puolen väsymiseliniän arvioimiseksi | 220-223 |
| Freund, Jouni Tapani | Two-scale Reissner-Mindlin plate model | 158-161 |
| Korpela, Antti / Jokinen, Marko / Kuivaniemi, Teemu / Frondelius, Tero | W4L20 VEBIC Genset Dynamics - Baseframe Design | 292-295 |
| Könnö, Juho / Tienhaara, Hannu / Frondelius, Tero | Wärtsilä Digital Design Platform | 234-238 |
| Björk, Timo / Tuominen, Niko Petteri / Ahola, Antti | X-liitoksen vinoutumisnurjahdus | 345-348 |
| Fortino, Stefania / Sippola, Merja / Andersson, Tom / Immonen, Kirsi / Miettinen, Arttu / Hradil, Petr | X-ray micro-tomography based FEM modelling of hygroexpansion in PLA composites reinforced with birch pulp fibers | 131-136 |
- About this
data sheet - IssueID
66068 - Published on:
02/06/2022 - Last updated on:
02/06/2022
Structurae cooperates with
