X-ray micro-tomography based FEM modelling of hygroexpansion in PLA composites reinforced with birch pulp fibers
| Author(s): |
Stefania Fortino
Merja Sippola Tom Andersson Kirsi Immonen Arttu Miettinen Petr Hradil |
|---|---|
| Medium: | journal article |
| Language(s): | Finnish |
| Published in: | Rakenteiden Mekaniikka = Journal of Structural Mechanics, August 2017, n. 3, v. 50 |
| Page(s): | 131-136 |
| DOI: | 10.23998/rm.65042 |
| Abstract: |
This article presents a microscale modelling approach coupled with X-ray computed micro-tomography for the evaluation of material properties of polylactic acid (PLA) reinforced by birch pulp fibers under the effect of moisture. The results in terms of elastic moduli and hygroexpansion deformation were found in good agreement with the measurements taken at different levels of water uptake. |
| License: | This creative work has been published under the Creative Commons Attribution-ShareAlike 4.0 International (CC-BY-SA 4.0) license which allows copying, and redistribution as well as adaptation of the original work provided appropriate credit is given and the same license is used as for the original work (the above link must be included). Any alterations to the original must also be mentioned. |
0.18 MB
- About this
data sheet - Reference-ID
10677075 - Published on:
02/06/2022 - Last updated on:
10/11/2022
