Materials and Structures - v. 54, n. 1 (December 2020)

Published:	December 2020

Articles in this Issue

Author(s)	Title	Page(s)
Feijoo, Jorge / Ergenç, Duygu / Fort, Rafael / Alvarez de Buergo, Monica	Addition of ferrocyanide-based compounds to repairing joint lime mortars as a protective method for porous building materials against sodium chloride damage
Valentini, Luca / Mascarin, Ludovico	Assessing the dimensional stability of alkali-activated calcined clays in the fresh state: a time-lapse X-ray imaging approach
Attia, T. / Di Benedetto, H. / Sauzéat, C. / Pouget, S.	Behaviour of an interface between pavement layers obtained using Digital Image Correlation
Deneele, Dimitri / Dony, Anne / Colin, Johan / Herrier, Gontran / Lesueur, Didier	The carbonation of a lime-treated soil: experimental approach
Li, Rui / Leng, Zhen / Partl, Manfred N. / Raab, Christiane	Characterization and modelling of creep and recovery behaviour of waterborne epoxy resin modified bitumen emulsion
Zeng, Deming / Cao, Mingli / Ming, Xing	Characterization of mechanical behavior and mechanism of hybrid fiber reinforced cementitious composites after exposure to high temperatures
Martinelli, Paolo / Colombo, Matteo / de la Fuente, Albert / Cavalaro, Sergio / Pujadas, Pablo / di Prisco, Marco	Characterization tests for predicting the mechanical performance of SFRC floors: design considerations
Martinelli, Paolo / Colombo, Matteo / Pujadas, Pablo / de la Fuente, Albert / Cavalaro, Sergio / di Prisco, Marco	Characterization tests for predicting the mechanical performance of SFRC floors: identification of fibre distribution and orientation effects
Izoret, Laurent / Al Haj Sleiman, Sara / Matoiri-Chaibati, Nadare / Grondin, Frédéric	Concrete in a severe freezing environment: a meteorological characterization
Ye, Xinyi / Li, Quanwang / Zhang, Qinming	Conformity control of chloride diffusivity for reinforced concrete structures of Hong Kong–Zhuhai–Macau sea-link project in marine environment
Jaafri, Reda / Souayfan, Faten / Zhu, Ran / Alam, Syed Yasir / Roziere, Emmanuel / Loukili, Ahmed	Curling evolution of a cementitious slab: experimental study and discrete element modelling
Gunes, M. E. / Pekmezci, B. Y. / Girgin, Z. C.	Durability of natural hydraulic lime (NHL) based TRM composites through hot water immersion method
He, Hang / Wang, Yuli / He, Fengxia / Luo, Shuqiong / Liu, Songhui	Effect of Li2CO3 on the properties of Portland cement paste
Yu, Chih-Peng / Lin, Yiching / Chang, Chia-Chia	An effective crack-identification approach for impact echo signals using MWT spectrograms and scaled FFT spectra
Shahri, Mahyar / Babazadeh, Abbas / Latifi Namin, Manouchehr	Effects of irregular loading patterns on fatigue life measured in indirect tensile fatigue test: a traffic-based study
Romero Clausell, Joan / Quintana-Gallardo, Alberto / Hidalgo Signes, Carlos / Serrano-Lanzarote, Begoña	Environmental evaluation of a self-compacted clay based concrete with natural superplasticizers
Dunphy, Kyle / Sadhu, Ayan / Banting, Bennett	Experimental and numerical investigation of tensile properties of early-age masonry
Zheng, Yu / Zhou, Nuan / Zhou, Lingzhu / Zhang, Hexin / Li, Haotian / Zhou, Yingwu	Experimental and theoretical study of bond behaviour between FRP bar and high-volume fly ash-self-compacting concrete
Zhang, Sherong / Wei, Peiyong / Wang, Chao / Wang, Gaohui / Lu, Wenbo / Cao, Kelei	Failure criteria calibration based on the triaxial compression behavior of roller compacted concrete (RCC)
Heidaripanah, Ali / Hassani, Abolfazl	A fundamental multiple-stage ANN-based sensitivity analysis to predict the dynamic modulus of hot mix asphalt considering the effect of confining stress
Lou, Baowen / Sha, Aimin / Barbieri, Diego Maria / Liu, Zhuangzhuang / Zhang, Fan / Jiang, Wei	Improved microwave heating uniformity and self-healing properties of steel slag asphalt containing ferrite filler
Zhang, Shipeng / Ghouleh, Zaid / Azar, Alain / Shao, Yixin	Improving concrete resistance to low temperature sulfate attack through carbonation curing
Ez-zaki, Hassan / Bellotto, Maurizio / Valentini, Luca / Garbin, Enrico / Artioli, Gilberto	Influence of cellulose nanofibrils on the rheology, microstructure and strength of alkali activated ground granulated blast-furnace slag: a comparison with ordinary Portland cement
Ding, Gongying / Yu, Xin / Si, Jingjing / Mei, Jie / Wang, Junyan / Chen, Bei	Influence of epoxy soybean oil modified nano-silica on the compatibility of cold-mixed epoxy asphalt
Li, Fan / Yang, Yuyou	The interfacial effect of mineral filler to asphalt binder and its influence on asphalt aging behavior
Park, Bongsuk / Zou, Jian / Hernando, David / Roque, Reynaldo / Waisome, Jeremy A. M.	Investigating the use of equivalent elastic approach to identify the potential location of bending-induced interface debonding under a moving load
Han, Yajin / Jiang, Jiwang / Ding, Jitong / Zhao, Zili / Ma, Xiang / Ni, Fujian	Investigation of the raveling potential of thin friction course (TFC) under freeze–thaw conditions
Ouyang, Jian / Cao, Peng / Meng, Yan / Tang, Taixiong	Investigation on the drying and demulsification process of filler–bitumen emulsion paste
Natalli, Juliana Fadini / Xavier, Ellen Martins / Costa, Laís Cristina Barbosa / Rodrigues, Bárbara Héllen / Sarmanho, Arlene Maria Cunha / Fiorotti Peixoto, Ricardo André	New methodology to analyze the steel–concrete bond in CFST filled with lightweight and conventional concrete
Baglieri, Orazio / Tozzi, Chiara / Dalmazzo, Davide / Tsantilis, Lucia / Santagata, Ezio	A novel methodology for the evaluation of low temperature failure properties of asphalt binders
Ince, Ragip / Bildik, Abdullah Tevfik	A preliminary concrete mixture design based on fracture toughness
Ariño Montoya, David / Pistofidis, Nikolaos / Giannakopoulos, Giannis / Iacobescu, Remus Ion / Katsiotis, Marios S. / Pontikes, Yiannis	Revisiting the iron-rich "ordinary Portland cement" towards valorisation of wastes: study of Fe-to-Al ratio on the clinker production and the hydration reaction
Visser, Divan / Boshoff, William P.	Shear behaviour of concrete V-shaped beams with and without steel fibres
Facconi, Luca / Minelli, Fausto / Ceresa, Paola / Plizzari, Giovanni	Steel fibers for replacing minimum reinforcement in beams under torsion
Fang, Naren / Li, Hao / Li, Qiqi / Wang, Xuancang / Hu, Shiqing / Xin, Lei	Study on asphalt layer of composite pavement temperature shrinkage stress considering stress relaxation
Xu, Longfei / Wong, Henry / Fabbri, Antonin / Champiré, Florian / Branque, Denis	A unified compaction curve for raw earth material based on both static and dynamic compaction tests
Xi, Lei / Luo, Rong	Use of Kramers–Kronig relations to construct the master curves of asphalt materials
Tourtelot, Julia / Ghattassi, Imen / Le Roy, Robert / Bourgès, Ann / Keita, Emmanuel	Yield stress measurement for earth-based building materials: the weighted plunger test

About this
data sheet
IssueID
54512
Published on:
05/01/2021
Last updated on:
05/01/2021

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Materials and Structures - v. 54, n. 1 (December 2020)

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Materials and Structures - v. 54, n. 1 (December 2020)

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.