Materials and Structures - v. 48, n. 8 (August 2015)

Published:	August 2015

Articles in this Issue

Author(s)	Title	Page(s)
Perraton, Daniel / Touhara, Radouen / Di Benedetto, Hervé / Carter, Alan	Ability of the classical fatigue criterion to be associated with macro-crack growth	2383-2395
Zhou, Wei / Hu, Haibo	Bearing capacity of steel fiber reinforced reactive powder concrete confined by spirals	2613-2628
Pourbeik, P. / Beaudoin, J. J. / Alizadeh, R. / Raki, L.	Correlation between dynamic mechanical thermo-analysis and composition-based models for C-S-H in hydrated portland cement paste	2447-2454
Supit, Steve Wilben Macquarie / Shaikh, Faiz Uddin Ahmed	Durability properties of high volume fly ash concrete containing nano-silica	2431-2445
Tao, Mu-Xuan / Nie, Jian-Guo	Element mesh, section discretization and material hysteretic laws for fiber beam–column elements of composite structural members	2521-2544
Zaumanis, Martins / Mallick, Rajib B. / Frank, Robert	Evaluation of different recycling agents for restoring aged asphalt binder and performance of 100 % recycled asphalt	2475-2488
Pasetto, Marco / Baldo, Nicola	Experimental analysis of hydraulically bound mixtures made with waste foundry sand and steel slag	2489-2503
Liu, Xiao-Gang / Fan, Jian-Sheng / Nie, Jian-Guo / Bai, Yu / Han, You-xu / Wu, Wei-hong	Experimental and analytical studies of prestressed concrete girders with corrugated steel webs	2505-2520
Melo, José / Rossetto, Tiziana / Varum, Humberto	Experimental study of bond–slip in RC structural elements with plain bars	2367-2381
Boulekbache, Bensaid / Hamrat, Mostefa / Chemrouk, Mohamed / Amziane, Sofiane	Failure mechanism of fibre reinforced concrete under splitting test using digital image correlation	2713-2726
Khattak, Mohammad J. / Khattab, Ahmed / Rizvi, Hashim R. / Das, Subasish / Bhuyan, Mohammad R.	Imaged-based discrete element modeling of hot mix asphalt mixtures	2417-2430
Facconi, Luca / Conforti, Antonio / Minelli, Fausto / Plizzari, Giovanni A.	Improving shear strength of unreinforced masonry walls by nano-reinforced fibrous mortar coating	2557-2574
Mostafa, A. / Shankar, K. / Morozov, E. V.	Independent analytical technique for analysis of the flexural behaviour of the composite sandwich panels incorporated with shear keys concept	2455-2474
Boubitsas, Dimitrios / Tang, Luping	The influence of reinforcement steel surface condition on initiation of chloride induced corrosion	2641-2658
Gurutzeaga, Mikel / Oller, Eva / Ribas, Carlos / Cladera, Antoni / Mari, Antonio	Influence of the longitudinal reinforcement on the shear strength of one-way concrete slabs	2597-2612
Lv, Yang / Li, Xiangguo / Ma, Baoguo / De Schutter, Geert	Managing Zn wastes in C3S: comparison of two incorporation methods	2659-2669
Mardani-Aghabaglou, Ali / Tuyan, Murat / Ramyar, Kambiz	Mechanical and durability performance of concrete incorporating fine recycled concrete and glass aggregates	2629-2640
Berenger, Aranda / Olivier, Guillou / Lanos, Christophe / Daiguebonne, Carole / Freslon, Stéphane / Tessier, Christophe / Laurans, Mélissa / Baux, Christophe / Greffet, Hélène	A new calcium sulfate-based plaster composed of composite particles	2685-2696
Chen, Fangliang / Qiao, Pizhong	Probabilistic damage modeling and service-life prediction of concrete under freeze–thaw action	2697-2711
Dang, Vu Hiep / François, Raoul / L'Hostis, Valérie / Meinel, Dietmar	Propagation of corrosion in pre-cracked carbonated reinforced mortar	2575-2595
Esteves, Luis Pedro	Recommended method for measurement of absorbency of superabsorbent polymers in cement-based materials	2397-2401
Yang, Shuyan / Liu, Xila	Seismic analytical model of shear strength for corroded RC column	2671-2684
Rahai, A. / Dolati, A. / Kamel, M. E. / Babaizadeh, H.	Studying the effect of various parameters on mechanical properties of lightweight aggregate concrete using MANOVA	2353-2365
Rosenqvist, Martin / Oxfall, Mikael / Fridh, Katja / Hassanzadeh, Manouchehr	A test method to assess the frost resistance of concrete at the waterline of hydraulic structures	2403-2415
Mo, Kim Hung / Alengaram, U. Johnson / Jumaat, Mohd Zamin	Utilization of ground granulated blast furnace slag as partial cement replacement in lightweight oil palm shell concrete	2545-2556

About this
data sheet
IssueID
16712
Published on:
10/12/2018
Last updated on:
26/07/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Materials and Structures - v. 48, n. 8 (August 2015)

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Materials and Structures - v. 48, n. 8 (August 2015)

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.