Materials and Structures - v. 48, n. 8 (août 2015)

Publié:	août 2015

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Perraton, Daniel / Touhara, Radouen / Di Benedetto, Hervé / Carter, Alan	Ability of the classical fatigue criterion to be associated with macro-crack growth	2383-2395
Zhou, Wei / Hu, Haibo	Bearing capacity of steel fiber reinforced reactive powder concrete confined by spirals	2613-2628
Pourbeik, P. / Beaudoin, J. J. / Alizadeh, R. / Raki, L.	Correlation between dynamic mechanical thermo-analysis and composition-based models for C-S-H in hydrated portland cement paste	2447-2454
Supit, Steve Wilben Macquarie / Shaikh, Faiz Uddin Ahmed	Durability properties of high volume fly ash concrete containing nano-silica	2431-2445
Tao, Mu-Xuan / Nie, Jian-Guo	Element mesh, section discretization and material hysteretic laws for fiber beam–column elements of composite structural members	2521-2544
Zaumanis, Martins / Mallick, Rajib B. / Frank, Robert	Evaluation of different recycling agents for restoring aged asphalt binder and performance of 100 % recycled asphalt	2475-2488
Pasetto, Marco / Baldo, Nicola	Experimental analysis of hydraulically bound mixtures made with waste foundry sand and steel slag	2489-2503
Liu, Xiao-Gang / Fan, Jian-Sheng / Nie, Jian-Guo / Bai, Yu / Han, You-xu / Wu, Wei-hong	Experimental and analytical studies of prestressed concrete girders with corrugated steel webs	2505-2520
Melo, José / Rossetto, Tiziana / Varum, Humberto	Experimental study of bond–slip in RC structural elements with plain bars	2367-2381
Boulekbache, Bensaid / Hamrat, Mostefa / Chemrouk, Mohamed / Amziane, Sofiane	Failure mechanism of fibre reinforced concrete under splitting test using digital image correlation	2713-2726
Khattak, Mohammad J. / Khattab, Ahmed / Rizvi, Hashim R. / Das, Subasish / Bhuyan, Mohammad R.	Imaged-based discrete element modeling of hot mix asphalt mixtures	2417-2430
Facconi, Luca / Conforti, Antonio / Minelli, Fausto / Plizzari, Giovanni A.	Improving shear strength of unreinforced masonry walls by nano-reinforced fibrous mortar coating	2557-2574
Mostafa, A. / Shankar, K. / Morozov, E. V.	Independent analytical technique for analysis of the flexural behaviour of the composite sandwich panels incorporated with shear keys concept	2455-2474
Boubitsas, Dimitrios / Tang, Luping	The influence of reinforcement steel surface condition on initiation of chloride induced corrosion	2641-2658
Gurutzeaga, Mikel / Oller, Eva / Ribas, Carlos / Cladera, Antoni / Mari, Antonio	Influence of the longitudinal reinforcement on the shear strength of one-way concrete slabs	2597-2612
Lv, Yang / Li, Xiangguo / Ma, Baoguo / De Schutter, Geert	Managing Zn wastes in C3S: comparison of two incorporation methods	2659-2669
Mardani-Aghabaglou, Ali / Tuyan, Murat / Ramyar, Kambiz	Mechanical and durability performance of concrete incorporating fine recycled concrete and glass aggregates	2629-2640
Berenger, Aranda / Olivier, Guillou / Lanos, Christophe / Daiguebonne, Carole / Freslon, Stéphane / Tessier, Christophe / Laurans, Mélissa / Baux, Christophe / Greffet, Hélène	A new calcium sulfate-based plaster composed of composite particles	2685-2696
Chen, Fangliang / Qiao, Pizhong	Probabilistic damage modeling and service-life prediction of concrete under freeze–thaw action	2697-2711
Dang, Vu Hiep / François, Raoul / L'Hostis, Valérie / Meinel, Dietmar	Propagation of corrosion in pre-cracked carbonated reinforced mortar	2575-2595
Esteves, Luis Pedro	Recommended method for measurement of absorbency of superabsorbent polymers in cement-based materials	2397-2401
Yang, Shuyan / Liu, Xila	Seismic analytical model of shear strength for corroded RC column	2671-2684
Rahai, A. / Dolati, A. / Kamel, M. E. / Babaizadeh, H.	Studying the effect of various parameters on mechanical properties of lightweight aggregate concrete using MANOVA	2353-2365
Rosenqvist, Martin / Oxfall, Mikael / Fridh, Katja / Hassanzadeh, Manouchehr	A test method to assess the frost resistance of concrete at the waterline of hydraulic structures	2403-2415
Mo, Kim Hung / Alengaram, U. Johnson / Jumaat, Mohd Zamin	Utilization of ground granulated blast furnace slag as partial cement replacement in lightweight oil palm shell concrete	2545-2556

Informations
sur cette fiche
IssueID
16712
Publié(e) le:
10.12.2018
Modifié(e) le:
26.07.2019

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Materials and Structures - v. 48, n. 8 (août 2015)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Materials and Structures - v. 48, n. 8 (août 2015)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.