Materials and Structures - v. 50, n. 4 (August 2017)

Published:	August 2017

Author(s)	Title	Page(s)
Cascardi, Alessio / Aiello, Maria Antonietta / Triantafillou, Thanasis	Analysis-oriented model for concrete and masonry confined with fiber reinforced mortar
Luengo, Emilio / Hermoso, Eva / Cabrero, Juan Carlos / Arriaga, Francisco	Bonding strength test method assessment for Cross-Laminated Timber Derived Stressed-Skin Panels (CLT SSP)
Franzoni, Elisa / Gentilini, Cristina / Santandrea, Mattia / Zanotto, Sara / Carloni, Christian	Durability of steel FRCM-masonry joints: effect of water and salt crystallization
De Nardi, C. / Bullo, S. / Ferrara, L. / Ronchin, L. / Vavasori, A.	Effectiveness of crystalline admixtures and lime/cement coated granules in engineered self-healing capacity of lime mortars
Kastiukas, Gediminas / Zhou, Xiangming	Effects of waste glass on alkali-activated tungsten mining waste: composition and mechanical properties
Fang, Xiaoliang / Xuan, Dongxing / Poon, Chi Sun	Empirical modelling of CO2 uptake by recycled concrete aggregates under accelerated carbonation conditions
Elsayed, M. / Nehdi, M. L.	Experimental and analytical study on grouted duct connections in precast concrete construction
Isailović, Ivan / Wistuba, Michael P. / Cannone Falchetto, Augusto	Experimental study on asphalt mixture recovery
Navarrete, Ivan / Hube, Matías A. / Kurama, Yahya / Lopez, Mauricio	Flexural behavior of stratified reinforced concrete: construction, testing, analysis, and design
Lo Monte, Francesco / Felicetti, Roberto	Heated slabs under biaxial compressive loading: a test set-up for the assessment of concrete sensitivity to spalling
Sanz, B. / Planas, J. / Sancho, J. M.	Influence of corrosion rate on the mechanical interaction of reinforcing steel, oxide and concrete
Bui, Phuong Trinh / Ogawa, Yuko / Nakarai, Kenichiro / Kawai, Kenji / Sato, Ryoichi	Internal curing of Class-F fly-ash concrete using high-volume roof-tile waste aggregate
Katz, Amnon / Kulisch, Daniele	Performance of mortars containing recycled fine aggregate from construction and demolition waste
McGregor, Fionn / Fabbri, Antonin / Ferreira, João / Simões, Tania / Faria, Paulina / Morel, Jean-Claude	Procedure to determine the impact of the surface film resistance on the hygric properties of composite clay/fibre plasters
Sadati, Seyedhamed / Khayat, Kamal H.	Restrained shrinkage cracking of recycled aggregate concrete
Schröfl, Christof / Snoeck, Didier / Mechtcherine, Viktor	A review of characterisation methods for superabsorbent polymer (SAP) samples to be used in cement-based construction materials: report of the RILEM TC 260-RSC
Karuppanasamy, Jayachandran / Pillai, Radhakrishna G.	A short-term test method to determine the chloride threshold of steel–cementitious systems with corrosion inhibiting admixtures

Author(s)

Title

Page(s)

Cascardi, Alessio / Aiello, Maria Antonietta / Triantafillou, Thanasis

Analysis-oriented model for concrete and masonry confined with fiber reinforced mortar

Luengo, Emilio / Hermoso, Eva / Cabrero, Juan Carlos / Arriaga, Francisco

Bonding strength test method assessment for Cross-Laminated Timber Derived Stressed-Skin Panels (CLT SSP)

Franzoni, Elisa / Gentilini, Cristina / Santandrea, Mattia / Zanotto, Sara / Carloni, Christian

Durability of steel FRCM-masonry joints: effect of water and salt crystallization

De Nardi, C. / Bullo, S. / Ferrara, L. / Ronchin, L. / Vavasori, A.

Effectiveness of crystalline admixtures and lime/cement coated granules in engineered self-healing capacity of lime mortars

Kastiukas, Gediminas / Zhou, Xiangming

Effects of waste glass on alkali-activated tungsten mining waste: composition and mechanical properties

Fang, Xiaoliang / Xuan, Dongxing / Poon, Chi Sun

Empirical modelling of CO2 uptake by recycled concrete aggregates under accelerated carbonation conditions

Elsayed, M. / Nehdi, M. L.

Experimental and analytical study on grouted duct connections in precast concrete construction

Isailović, Ivan / Wistuba, Michael P. / Cannone Falchetto, Augusto

Experimental study on asphalt mixture recovery

Navarrete, Ivan / Hube, Matías A. / Kurama, Yahya / Lopez, Mauricio

Flexural behavior of stratified reinforced concrete: construction, testing, analysis, and design

Lo Monte, Francesco / Felicetti, Roberto

Heated slabs under biaxial compressive loading: a test set-up for the assessment of concrete sensitivity to spalling

Sanz, B. / Planas, J. / Sancho, J. M.

Influence of corrosion rate on the mechanical interaction of reinforcing steel, oxide and concrete

Bui, Phuong Trinh / Ogawa, Yuko / Nakarai, Kenichiro / Kawai, Kenji / Sato, Ryoichi

Internal curing of Class-F fly-ash concrete using high-volume roof-tile waste aggregate

Katz, Amnon / Kulisch, Daniele

Performance of mortars containing recycled fine aggregate from construction and demolition waste

McGregor, Fionn / Fabbri, Antonin / Ferreira, João / Simões, Tania / Faria, Paulina / Morel, Jean-Claude

Procedure to determine the impact of the surface film resistance on the hygric properties of composite clay/fibre plasters

Sadati, Seyedhamed / Khayat, Kamal H.

Restrained shrinkage cracking of recycled aggregate concrete

Schröfl, Christof / Snoeck, Didier / Mechtcherine, Viktor

A review of characterisation methods for superabsorbent polymer (SAP) samples to be used in cement-based construction materials: report of the RILEM TC 260-RSC

Karuppanasamy, Jayachandran / Pillai, Radhakrishna G.

A short-term test method to determine the chloride threshold of steel–cementitious systems with corrosion inhibiting admixtures

Advertisement

Materials and Structures - v. 50, n. 4 (August 2017)

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Materials and Structures - v. 50, n. 4 (August 2017)

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.