Materials and Structures - v. 50, n. 4 (août 2017)

Publié:	août 2017

Auteur(s)	Titre	Page(s)
Cascardi, Alessio / Aiello, Maria Antonietta / Triantafillou, Thanasis	Analysis-oriented model for concrete and masonry confined with fiber reinforced mortar
Luengo, Emilio / Hermoso, Eva / Cabrero, Juan Carlos / Arriaga, Francisco	Bonding strength test method assessment for Cross-Laminated Timber Derived Stressed-Skin Panels (CLT SSP)
Franzoni, Elisa / Gentilini, Cristina / Santandrea, Mattia / Zanotto, Sara / Carloni, Christian	Durability of steel FRCM-masonry joints: effect of water and salt crystallization
De Nardi, C. / Bullo, S. / Ferrara, L. / Ronchin, L. / Vavasori, A.	Effectiveness of crystalline admixtures and lime/cement coated granules in engineered self-healing capacity of lime mortars
Kastiukas, Gediminas / Zhou, Xiangming	Effects of waste glass on alkali-activated tungsten mining waste: composition and mechanical properties
Fang, Xiaoliang / Xuan, Dongxing / Poon, Chi Sun	Empirical modelling of CO2 uptake by recycled concrete aggregates under accelerated carbonation conditions
Elsayed, M. / Nehdi, M. L.	Experimental and analytical study on grouted duct connections in precast concrete construction
Isailović, Ivan / Wistuba, Michael P. / Cannone Falchetto, Augusto	Experimental study on asphalt mixture recovery
Navarrete, Ivan / Hube, Matías A. / Kurama, Yahya / Lopez, Mauricio	Flexural behavior of stratified reinforced concrete: construction, testing, analysis, and design
Lo Monte, Francesco / Felicetti, Roberto	Heated slabs under biaxial compressive loading: a test set-up for the assessment of concrete sensitivity to spalling
Sanz, B. / Planas, J. / Sancho, J. M.	Influence of corrosion rate on the mechanical interaction of reinforcing steel, oxide and concrete
Bui, Phuong Trinh / Ogawa, Yuko / Nakarai, Kenichiro / Kawai, Kenji / Sato, Ryoichi	Internal curing of Class-F fly-ash concrete using high-volume roof-tile waste aggregate
Katz, Amnon / Kulisch, Daniele	Performance of mortars containing recycled fine aggregate from construction and demolition waste
McGregor, Fionn / Fabbri, Antonin / Ferreira, João / Simões, Tania / Faria, Paulina / Morel, Jean-Claude	Procedure to determine the impact of the surface film resistance on the hygric properties of composite clay/fibre plasters
Sadati, Seyedhamed / Khayat, Kamal H.	Restrained shrinkage cracking of recycled aggregate concrete
Schröfl, Christof / Snoeck, Didier / Mechtcherine, Viktor	A review of characterisation methods for superabsorbent polymer (SAP) samples to be used in cement-based construction materials: report of the RILEM TC 260-RSC
Karuppanasamy, Jayachandran / Pillai, Radhakrishna G.	A short-term test method to determine the chloride threshold of steel–cementitious systems with corrosion inhibiting admixtures

Auteur(s)

Titre

Page(s)

Cascardi, Alessio / Aiello, Maria Antonietta / Triantafillou, Thanasis

Analysis-oriented model for concrete and masonry confined with fiber reinforced mortar

Luengo, Emilio / Hermoso, Eva / Cabrero, Juan Carlos / Arriaga, Francisco

Bonding strength test method assessment for Cross-Laminated Timber Derived Stressed-Skin Panels (CLT SSP)

Franzoni, Elisa / Gentilini, Cristina / Santandrea, Mattia / Zanotto, Sara / Carloni, Christian

Durability of steel FRCM-masonry joints: effect of water and salt crystallization

De Nardi, C. / Bullo, S. / Ferrara, L. / Ronchin, L. / Vavasori, A.

Effectiveness of crystalline admixtures and lime/cement coated granules in engineered self-healing capacity of lime mortars

Kastiukas, Gediminas / Zhou, Xiangming

Effects of waste glass on alkali-activated tungsten mining waste: composition and mechanical properties

Fang, Xiaoliang / Xuan, Dongxing / Poon, Chi Sun

Empirical modelling of CO2 uptake by recycled concrete aggregates under accelerated carbonation conditions

Elsayed, M. / Nehdi, M. L.

Experimental and analytical study on grouted duct connections in precast concrete construction

Isailović, Ivan / Wistuba, Michael P. / Cannone Falchetto, Augusto

Experimental study on asphalt mixture recovery

Navarrete, Ivan / Hube, Matías A. / Kurama, Yahya / Lopez, Mauricio

Flexural behavior of stratified reinforced concrete: construction, testing, analysis, and design

Lo Monte, Francesco / Felicetti, Roberto

Heated slabs under biaxial compressive loading: a test set-up for the assessment of concrete sensitivity to spalling

Sanz, B. / Planas, J. / Sancho, J. M.

Influence of corrosion rate on the mechanical interaction of reinforcing steel, oxide and concrete

Bui, Phuong Trinh / Ogawa, Yuko / Nakarai, Kenichiro / Kawai, Kenji / Sato, Ryoichi

Internal curing of Class-F fly-ash concrete using high-volume roof-tile waste aggregate

Katz, Amnon / Kulisch, Daniele

Performance of mortars containing recycled fine aggregate from construction and demolition waste

McGregor, Fionn / Fabbri, Antonin / Ferreira, João / Simões, Tania / Faria, Paulina / Morel, Jean-Claude

Procedure to determine the impact of the surface film resistance on the hygric properties of composite clay/fibre plasters

Sadati, Seyedhamed / Khayat, Kamal H.

Restrained shrinkage cracking of recycled aggregate concrete

Schröfl, Christof / Snoeck, Didier / Mechtcherine, Viktor

A review of characterisation methods for superabsorbent polymer (SAP) samples to be used in cement-based construction materials: report of the RILEM TC 260-RSC

Karuppanasamy, Jayachandran / Pillai, Radhakrishna G.

A short-term test method to determine the chloride threshold of steel–cementitious systems with corrosion inhibiting admixtures

Publicité

Materials and Structures - v. 50, n. 4 (août 2017)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Materials and Structures - v. 50, n. 4 (août 2017)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.