Materials and Structures - v. 49, n. 4 (April 2016)

Published:	April 2016

Author(s)	Title	Page(s)
Girgle, František / Štěpánek, Petr	An anchoring element for prestressed FRP reinforcement: simplified design of the anchoring area	1337-1350
Xiong, Ming-Xiang / Yan, Jia-Bao	Buckling length determination of concrete filled steel tubular column under axial compression in standard fire test	1201-1212
van Zijl, Gideon P. A. G. / Slowik, Volker / Toledo Filho, Romildo D. / Wittmann, Folker H. / Mihashi, Hirozo	Comparative testing of crack formation in strain-hardening cement-based composites (SHCC)	1175-1189
Israngkura Na Ayudhya, Borvorn	Comparison of compressive and splitting tensile strength of autoclaved aerated concrete (AAC) containing water hyacinth and polypropylene fibre subjected to elevated temperatures	1455-1468
Gupta, Rishi / Banthia, Nemkumar	Correlating plastic shrinkage cracking potential of fiber reinforced cement composites with its early-age constitutive response in tension	1499-1509
Mikhailenko, Peter / Bertron, Alexandra / Ringot, Erick	Determination of the performance and damage to asphalt of bio-sourced asphalt release agents (ARAs) Part II: evaluation of biodegradable products for use as ARAs and bitumen removers (BRs)	1419-1432
Mikhailenko, Peter / Ringot, Erick / Bertron, Alexandra / Escadeillas, Gilles	Determination of the performance and damage to asphalt of bio-sourced asphalt release agents (ARAs) part I: developing test methods	1403-1418
Wille, K. / Xu, M. / El-Tawil, S. / Naaman, A. E.	Dynamic impact factors of strain hardening UHP-FRC under direct tensile loading at low strain rates	1351-1365
Moevus, Mariette / Jorand, Yves / Olagnon, Christian / Maximilien, Sandrine / Anger, Romain / Fontaine, Laetitia / Arnaud, Laurent	Earthen construction: an increase of the mechanical strength by optimizing the dispersion of the binder phase	1555-1568
Shan, Liyan / Zhang, Hong / Tan, Yiqiu / Xu, Yanan	Effect of load control mode on the fatigue performance of asphalt binder	1391-1402
Xu, Song / Yu, Jianying / Zhang, Canlin / Yao, Tingting / Sun, Yubin	Effect of salicylic acid intercalated layered double hydroxides on ultraviolet aging properties of bitumen	1235-1244
Yew, Ming Kun / Mahmud, Hilmi Bin / Shafigh, Payam / Ang, Bee Chin / Yew, Ming Chian	Effects of polypropylene twisted bundle fibers on the mechanical properties of high-strength oil palm shell lightweight concrete	1221-1233
Galitz, Christopher / Grasley, Zachary	Effects of strain reversal on elastic and viscoelastic properties of early age cement paste beams	1285-1297
Hamedi, Gholam Hossein / Nejad, Fereidoon Moghadas / Oveisi, Khosro	Estimating the moisture damage of asphalt mixture modified with nano zinc oxide	1165-1174
Sun, Xiaochen / Zhu, Guowei / Liu, Gang / Yi, Xiaosu / Jia, Yuxi	Experimental and numerical analysis on Mode-I delamination of CFRP laminates toughened by polyamide non-woven fabric layer	1191-1200
Anbarasu, M. / Murugapandian, G.	Experimental study on cold-formed steel web stiffened lipped channel columns undergoing distortional–global interaction	1433-1442
Won, Deok Hee / Han, Taek Hee / Kim, Seungjun / Kang, Young Jong	Fire resistance of double-skinned composite tubular columns including concrete confinement	1269-1284
Feng, Zhen-Gang / Bian, Hui-juan / Li, Xin-jun / Yu, Jian-Ying	FTIR analysis of UV aging on bitumen and its fractions	1381-1389
Xu, Biwan / Ma, Hongyan / Hu, Chuanlin / Li, Zongjin	Influence of cenospheres on properties of magnesium oxychloride cement-based composites	1319-1326
Vincent, Thomas / Ozbakkaloglu, Togay	Influence of overlap configuration on compressive behavior of CFRP-confined normal- and high-strength concrete	1245-1268
Lyne, Åsa Laurell / Taylor, Nathaniel / Jaeverberg, Nadja / Edin, Hans / Birgisson, Björn	Low frequency dielectric spectroscopy of bitumen binders as an indicator of adhesion potential to quartz aggregates using Portland cement	1327-1336
Khelifi, H. / Lecompte, T. / Perrot, A. / Ausias, G.	Mechanical enhancement of cement-stabilized soil by flax fibre reinforcement and extrusion processing	1143-1156
Wang, Jiabin / Niu, Ditao / Zhang, Yongli	Microstructure and mechanical properties of accelerated sprayed concrete	1469-1484
Franzoni, Elisa / Pigino, Barbara / Graziani, Gabriela / Lucchese, Claudio / Fregni, Alberto	A new prefabricated external thermal insulation composite board with ceramic finishing for buildings retrofitting	1527-1542
Muigai, R. / Alexander, M. / Moyo, P.	A novel framework towards the design of more sustainable concrete infrastructure	1127-1141
Wang, Jun / Xu, Jin / Gao, Danying	Numerical relationship between creep deformation coefficients of prestressed concrete beams	1443-1453
Teixeira Costa, Ricardo Joel / Providência, Paulo / Gomes, Fernando	On the need for classification criteria for cast in situ RC beam–column joints according to their stiffness	1299-1317
Ziaadiny, H.	Plastic strain and stress deterioration of FRP-confined concrete prisms under axial cyclic compression	1157-1164
Magalhães, Fábio Costa / de Vasconcellos Real, Mauro / da Silva Filho, Luiz Carlos Pinto	The problem of non-compliant concrete and its influence on the reliability of reinforced concrete columns	1485-1497
do Socorro Melo de Souza, Shirley / Shehata, Ibrahim Abd El Malik / da Conceição Domingues Shehata, Lidia	Shear resistance of reinforced concrete waffle flat slabs around the solid panel	1367-1380
Perrot, A. / Rangeard, D. / Pierre, A.	Structural built-up of cement-based materials used for 3D-printing extrusion techniques	1213-1220
Han, Jianguo / Wang, Kejin / Wang, Yue / Shi, Jiyao	Study of aluminum sulfate and anhydrite on cement hydration process	1105-1114
Morales-Conde, M. J. / Rodríguez-Liñán, C. / Rubio-de Hita, P.	A study of the wood-related factors involved in non-destructive ultrasound tests perpendicular to the grain for Scots pine	1543-1552
Agheshlui, Hossein / Goldsworthy, Helen / Gad, Emad / Fernando, Saman	Tensile behaviour of anchored blind bolts in concrete filled square hollow sections	1511-1525
Umponpanarat, P. / Wansom, S.	Thermal conductivity and strength of foamed gypsum formulated using aluminum sulfate and sodium bicarbonate as gas-producing additives	1115-1126

Author(s)

Title

Page(s)

Girgle, František / Štěpánek, Petr

An anchoring element for prestressed FRP reinforcement: simplified design of the anchoring area

1337-1350

Xiong, Ming-Xiang / Yan, Jia-Bao

Buckling length determination of concrete filled steel tubular column under axial compression in standard fire test

1201-1212

van Zijl, Gideon P. A. G. / Slowik, Volker / Toledo Filho, Romildo D. / Wittmann, Folker H. / Mihashi, Hirozo

Comparative testing of crack formation in strain-hardening cement-based composites (SHCC)

1175-1189

Israngkura Na Ayudhya, Borvorn

Comparison of compressive and splitting tensile strength of autoclaved aerated concrete (AAC) containing water hyacinth and polypropylene fibre subjected to elevated temperatures

1455-1468

Gupta, Rishi / Banthia, Nemkumar

Correlating plastic shrinkage cracking potential of fiber reinforced cement composites with its early-age constitutive response in tension

1499-1509

Mikhailenko, Peter / Bertron, Alexandra / Ringot, Erick

Determination of the performance and damage to asphalt of bio-sourced asphalt release agents (ARAs) Part II: evaluation of biodegradable products for use as ARAs and bitumen removers (BRs)

1419-1432

Mikhailenko, Peter / Ringot, Erick / Bertron, Alexandra / Escadeillas, Gilles

Determination of the performance and damage to asphalt of bio-sourced asphalt release agents (ARAs) part I: developing test methods

1403-1418

Wille, K. / Xu, M. / El-Tawil, S. / Naaman, A. E.

Dynamic impact factors of strain hardening UHP-FRC under direct tensile loading at low strain rates

1351-1365

Moevus, Mariette / Jorand, Yves / Olagnon, Christian / Maximilien, Sandrine / Anger, Romain / Fontaine, Laetitia / Arnaud, Laurent

Earthen construction: an increase of the mechanical strength by optimizing the dispersion of the binder phase

1555-1568

Shan, Liyan / Zhang, Hong / Tan, Yiqiu / Xu, Yanan

Effect of load control mode on the fatigue performance of asphalt binder

1391-1402

Xu, Song / Yu, Jianying / Zhang, Canlin / Yao, Tingting / Sun, Yubin

Effect of salicylic acid intercalated layered double hydroxides on ultraviolet aging properties of bitumen

1235-1244

Yew, Ming Kun / Mahmud, Hilmi Bin / Shafigh, Payam / Ang, Bee Chin / Yew, Ming Chian

Effects of polypropylene twisted bundle fibers on the mechanical properties of high-strength oil palm shell lightweight concrete

1221-1233

Galitz, Christopher / Grasley, Zachary

Effects of strain reversal on elastic and viscoelastic properties of early age cement paste beams

1285-1297

Hamedi, Gholam Hossein / Nejad, Fereidoon Moghadas / Oveisi, Khosro

Estimating the moisture damage of asphalt mixture modified with nano zinc oxide

1165-1174

Sun, Xiaochen / Zhu, Guowei / Liu, Gang / Yi, Xiaosu / Jia, Yuxi

Experimental and numerical analysis on Mode-I delamination of CFRP laminates toughened by polyamide non-woven fabric layer

1191-1200

Anbarasu, M. / Murugapandian, G.

Experimental study on cold-formed steel web stiffened lipped channel columns undergoing distortional–global interaction

1433-1442

Won, Deok Hee / Han, Taek Hee / Kim, Seungjun / Kang, Young Jong

Fire resistance of double-skinned composite tubular columns including concrete confinement

1269-1284

Feng, Zhen-Gang / Bian, Hui-juan / Li, Xin-jun / Yu, Jian-Ying

FTIR analysis of UV aging on bitumen and its fractions

1381-1389

Xu, Biwan / Ma, Hongyan / Hu, Chuanlin / Li, Zongjin

Influence of cenospheres on properties of magnesium oxychloride cement-based composites

1319-1326

Vincent, Thomas / Ozbakkaloglu, Togay

Influence of overlap configuration on compressive behavior of CFRP-confined normal- and high-strength concrete

1245-1268

Lyne, Åsa Laurell / Taylor, Nathaniel / Jaeverberg, Nadja / Edin, Hans / Birgisson, Björn

Low frequency dielectric spectroscopy of bitumen binders as an indicator of adhesion potential to quartz aggregates using Portland cement

1327-1336

Khelifi, H. / Lecompte, T. / Perrot, A. / Ausias, G.

Mechanical enhancement of cement-stabilized soil by flax fibre reinforcement and extrusion processing

1143-1156

Wang, Jiabin / Niu, Ditao / Zhang, Yongli

Microstructure and mechanical properties of accelerated sprayed concrete

1469-1484

Franzoni, Elisa / Pigino, Barbara / Graziani, Gabriela / Lucchese, Claudio / Fregni, Alberto

A new prefabricated external thermal insulation composite board with ceramic finishing for buildings retrofitting

1527-1542

Muigai, R. / Alexander, M. / Moyo, P.

A novel framework towards the design of more sustainable concrete infrastructure

1127-1141

Wang, Jun / Xu, Jin / Gao, Danying

Numerical relationship between creep deformation coefficients of prestressed concrete beams

1443-1453

Teixeira Costa, Ricardo Joel / Providência, Paulo / Gomes, Fernando

On the need for classification criteria for cast in situ RC beam–column joints according to their stiffness

1299-1317

Ziaadiny, H.

Plastic strain and stress deterioration of FRP-confined concrete prisms under axial cyclic compression

1157-1164

Magalhães, Fábio Costa / de Vasconcellos Real, Mauro / da Silva Filho, Luiz Carlos Pinto

The problem of non-compliant concrete and its influence on the reliability of reinforced concrete columns

1485-1497

do Socorro Melo de Souza, Shirley / Shehata, Ibrahim Abd El Malik / da Conceição Domingues Shehata, Lidia

Shear resistance of reinforced concrete waffle flat slabs around the solid panel

1367-1380

Perrot, A. / Rangeard, D. / Pierre, A.

Structural built-up of cement-based materials used for 3D-printing extrusion techniques

1213-1220

Han, Jianguo / Wang, Kejin / Wang, Yue / Shi, Jiyao

Study of aluminum sulfate and anhydrite on cement hydration process

1105-1114

Morales-Conde, M. J. / Rodríguez-Liñán, C. / Rubio-de Hita, P.

A study of the wood-related factors involved in non-destructive ultrasound tests perpendicular to the grain for Scots pine

1543-1552

Agheshlui, Hossein / Goldsworthy, Helen / Gad, Emad / Fernando, Saman

Tensile behaviour of anchored blind bolts in concrete filled square hollow sections

1511-1525

Umponpanarat, P. / Wansom, S.

Thermal conductivity and strength of foamed gypsum formulated using aluminum sulfate and sodium bicarbonate as gas-producing additives

1115-1126

Advertisement

Materials and Structures - v. 49, n. 4 (April 2016)

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Materials and Structures - v. 49, n. 4 (April 2016)

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.