Materials and Structures - v. 49, n. 4 (avril 2016)

Publié:	avril 2016

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Girgle, František / Štěpánek, Petr	An anchoring element for prestressed FRP reinforcement: simplified design of the anchoring area	1337-1350
Xiong, Ming-Xiang / Yan, Jia-Bao	Buckling length determination of concrete filled steel tubular column under axial compression in standard fire test	1201-1212
van Zijl, Gideon P. A. G. / Slowik, Volker / Toledo Filho, Romildo D. / Wittmann, Folker H. / Mihashi, Hirozo	Comparative testing of crack formation in strain-hardening cement-based composites (SHCC)	1175-1189
Israngkura Na Ayudhya, Borvorn	Comparison of compressive and splitting tensile strength of autoclaved aerated concrete (AAC) containing water hyacinth and polypropylene fibre subjected to elevated temperatures	1455-1468
Gupta, Rishi / Banthia, Nemkumar	Correlating plastic shrinkage cracking potential of fiber reinforced cement composites with its early-age constitutive response in tension	1499-1509
Mikhailenko, Peter / Bertron, Alexandra / Ringot, Erick	Determination of the performance and damage to asphalt of bio-sourced asphalt release agents (ARAs) Part II: evaluation of biodegradable products for use as ARAs and bitumen removers (BRs)	1419-1432
Mikhailenko, Peter / Ringot, Erick / Bertron, Alexandra / Escadeillas, Gilles	Determination of the performance and damage to asphalt of bio-sourced asphalt release agents (ARAs) part I: developing test methods	1403-1418
Wille, K. / Xu, M. / El-Tawil, S. / Naaman, A. E.	Dynamic impact factors of strain hardening UHP-FRC under direct tensile loading at low strain rates	1351-1365
Moevus, Mariette / Jorand, Yves / Olagnon, Christian / Maximilien, Sandrine / Anger, Romain / Fontaine, Laetitia / Arnaud, Laurent	Earthen construction: an increase of the mechanical strength by optimizing the dispersion of the binder phase	1555-1568
Shan, Liyan / Zhang, Hong / Tan, Yiqiu / Xu, Yanan	Effect of load control mode on the fatigue performance of asphalt binder	1391-1402
Xu, Song / Yu, Jianying / Zhang, Canlin / Yao, Tingting / Sun, Yubin	Effect of salicylic acid intercalated layered double hydroxides on ultraviolet aging properties of bitumen	1235-1244
Yew, Ming Kun / Mahmud, Hilmi Bin / Shafigh, Payam / Ang, Bee Chin / Yew, Ming Chian	Effects of polypropylene twisted bundle fibers on the mechanical properties of high-strength oil palm shell lightweight concrete	1221-1233
Galitz, Christopher / Grasley, Zachary	Effects of strain reversal on elastic and viscoelastic properties of early age cement paste beams	1285-1297
Hamedi, Gholam Hossein / Nejad, Fereidoon Moghadas / Oveisi, Khosro	Estimating the moisture damage of asphalt mixture modified with nano zinc oxide	1165-1174
Sun, Xiaochen / Zhu, Guowei / Liu, Gang / Yi, Xiaosu / Jia, Yuxi	Experimental and numerical analysis on Mode-I delamination of CFRP laminates toughened by polyamide non-woven fabric layer	1191-1200
Anbarasu, M. / Murugapandian, G.	Experimental study on cold-formed steel web stiffened lipped channel columns undergoing distortional–global interaction	1433-1442
Won, Deok Hee / Han, Taek Hee / Kim, Seungjun / Kang, Young Jong	Fire resistance of double-skinned composite tubular columns including concrete confinement	1269-1284
Feng, Zhen-Gang / Bian, Hui-juan / Li, Xin-jun / Yu, Jian-Ying	FTIR analysis of UV aging on bitumen and its fractions	1381-1389
Xu, Biwan / Ma, Hongyan / Hu, Chuanlin / Li, Zongjin	Influence of cenospheres on properties of magnesium oxychloride cement-based composites	1319-1326
Vincent, Thomas / Ozbakkaloglu, Togay	Influence of overlap configuration on compressive behavior of CFRP-confined normal- and high-strength concrete	1245-1268
Lyne, Åsa Laurell / Taylor, Nathaniel / Jaeverberg, Nadja / Edin, Hans / Birgisson, Björn	Low frequency dielectric spectroscopy of bitumen binders as an indicator of adhesion potential to quartz aggregates using Portland cement	1327-1336
Khelifi, H. / Lecompte, T. / Perrot, A. / Ausias, G.	Mechanical enhancement of cement-stabilized soil by flax fibre reinforcement and extrusion processing	1143-1156
Wang, Jiabin / Niu, Ditao / Zhang, Yongli	Microstructure and mechanical properties of accelerated sprayed concrete	1469-1484
Franzoni, Elisa / Pigino, Barbara / Graziani, Gabriela / Lucchese, Claudio / Fregni, Alberto	A new prefabricated external thermal insulation composite board with ceramic finishing for buildings retrofitting	1527-1542
Muigai, R. / Alexander, M. / Moyo, P.	A novel framework towards the design of more sustainable concrete infrastructure	1127-1141
Wang, Jun / Xu, Jin / Gao, Danying	Numerical relationship between creep deformation coefficients of prestressed concrete beams	1443-1453
Teixeira Costa, Ricardo Joel / Providência, Paulo / Gomes, Fernando	On the need for classification criteria for cast in situ RC beam–column joints according to their stiffness	1299-1317
Ziaadiny, H.	Plastic strain and stress deterioration of FRP-confined concrete prisms under axial cyclic compression	1157-1164
Magalhães, Fábio Costa / de Vasconcellos Real, Mauro / da Silva Filho, Luiz Carlos Pinto	The problem of non-compliant concrete and its influence on the reliability of reinforced concrete columns	1485-1497
do Socorro Melo de Souza, Shirley / Shehata, Ibrahim Abd El Malik / da Conceição Domingues Shehata, Lidia	Shear resistance of reinforced concrete waffle flat slabs around the solid panel	1367-1380
Perrot, A. / Rangeard, D. / Pierre, A.	Structural built-up of cement-based materials used for 3D-printing extrusion techniques	1213-1220
Han, Jianguo / Wang, Kejin / Wang, Yue / Shi, Jiyao	Study of aluminum sulfate and anhydrite on cement hydration process	1105-1114
Morales-Conde, M. J. / Rodríguez-Liñán, C. / Rubio-de Hita, P.	A study of the wood-related factors involved in non-destructive ultrasound tests perpendicular to the grain for Scots pine	1543-1552
Agheshlui, Hossein / Goldsworthy, Helen / Gad, Emad / Fernando, Saman	Tensile behaviour of anchored blind bolts in concrete filled square hollow sections	1511-1525
Umponpanarat, P. / Wansom, S.	Thermal conductivity and strength of foamed gypsum formulated using aluminum sulfate and sodium bicarbonate as gas-producing additives	1115-1126

Informations
sur cette fiche
IssueID
16690
Publié(e) le:
10.12.2018
Modifié(e) le:
26.07.2019

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Materials and Structures - v. 49, n. 4 (avril 2016)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Materials and Structures - v. 49, n. 4 (avril 2016)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.