Journal of Materials in Civil Engineering (ASCE) - v. 34, n. 6 (June 2022)

Published:	June 2022

Articles in this Issue

Author(s)	Title	Page(s)
Sombra, Thomas Nunes / Haach, Vladimir Guilherme	Application of Acoustic Tests for the Mechanical Characterization of Hollow Masonry Units
Rakhimova, Nailia R. / Morozov, Vladimir P. / Eskin, Aleksey A. / Lutskin, Yevgen S. / Shynkevych, Olena S.	Blended Alkali-Activated Cements Based on Blast-Furnace Slag and Calcined Clays: Statistical Modeling and Effect of Amount and Chemistry of Reactive Phase
El Ghor, Ahmad H. / Morovat, Mohammed Ali / Engelhardt, Michael D. / Hantouche, Elie G.	Creep Behavior of Transverse Welded Lap Joints at Elevated Temperatures
Liu, Yang / Qian, Zhendong / Yang, Yuming / Huang, Qibo / Zhang, Xiangfei	Effect of Curing Reaction Behaviors of Warm Mix Epoxy Asphalt Concrete on Its Field Compaction Characteristics Using Discrete-Element Method
Gao, Danying / Xu, Wenda / Yang, Lin / Meng, Yang / Xie, Jiqiang	Effect of Curing Temperature on the Hydration of Calcium Sulfoaluminate Cement-Ground Granulated Blast Furnace Slag-Gypsum Mixture
You, Nanqiao / Zhu, Guorui / He, Tongtong / Zhang, Yamei	Effect of Predrying Temperature on Carbonation of Alkali-Activated Slag Pastes
Silveira, Mariana Vela / Ferreira, José Wilson dos Santos / Casagrande, Michéle Dal Toé	Effect of Surface Treatment on Natural Aging and Mechanical Behavior of Sisal Fiber–Reinforced Sand Composite
Pires, Vera / Rosa, L. G. / Amaral, P. M. / Dionísio, A. / Simão, J. A. R.	Experimental Studies of the Effect of SO2 on the Mechanical Properties of Selected Cladding Natural Stones
Zhang, Ziyang / Xu, Tengfei / Deng, Kailai / Tong, Teng / Zhou, Hao	Experimental Study on Creep Failure of Non-Steam-Cured Ultrahigh-Performance Concrete under High Uniaxial Compressive Stress
Zhu, Anyou / Wu, Hanli / Liu, Jenny	Feasibility Study on Novel Fire-Resistant Coating Materials
Chen, Gang / Zhao, Liangping / Gao, Danying / Yuan, Jiansong / Bai, Jing / Wang, Weiqiang	Flexural Tensile Behavior of Single and Novel Multiple Hooked-End Steel Fiber–Reinforced Notched Concrete Beams
Pathak, Santanu / Choudhary, Rajan / Kumar, Abhinay / Pattanaik, Madhu Lisha	Friction Characteristics of Open Graded Asphalt Friction Courses with BOF and EAF Steel Slag Aggregates
Zeng, Hang / Hartell, Julie Ann	Identification of Acoustic Emission Signatures and Their Capability to Assess the Damage of Reinforced Concrete Beam under Incremental Cyclic Loading
Emmanuel, Arun C. / Bishnoi, Shashank	Influence of Clinker Replacement and Curing Temperature on Hydration Kinetics, Strength Development, and Phase Assemblage of Fly Ash–Blended Cements
Özer, A. Tolga / Akay, Onur	Interface Shear Strength of EPS-Concrete Elements of Various Configurations
Zhang, Wei / Zhang, Zhengqi / Zhao, Qinsheng	Laboratory Performance Evaluation of a Waterborne Epoxy-Modified Asphalt Mixture with Styrene-Butadiene Rubber for Cold Patching Applications
Wu, Chunli / Li, Liding / Cheng, Yongchun / Gu, Zhengwei / Wang, Haitao / Tan, Xiaoshu / Li, He	Laboratory Study and Simulation Analysis on Anticrack Properties of Open-Graded Friction Course Based on Creep Tests
Wang, Jie / Qin, Yongchun / Xu, Jian / Chang, Rong / Liu, Liping	Microscale Property Evaluation of the Interface between Cement Emulsified Asphalt and Aged Asphalt in Emulsified Asphalt Cold Recycled Mixture
Kong, Y. K. / Chu, S. H.	Modeling the Drying Shrinkage of Cement Paste Prepared with Wastewater
Diab, Aboelkasim / Saboo, Nikhil / You, Lingyun	Moisture, Rutting, and Fatigue-Cracking Susceptibility of Water-Carrying, Wax-Based, and Chemical-Based Warm Mix Asphalt Systems
Padilla, Angel / Genedy, Moneeb / Knight, Earl E. / Rougier, Esteban / Stormont, John / Reda Taha, Mahmoud M.	Monitoring Postpeak Crack Propagation in Concrete in the Brazilian Tension Test
Alanazi, Hani / Kim, Yong-Rak / Hu, Jiong / Little, Dallas N. / Jung, Jong Suk	Multiscale Characterization of Fly Ash–Based Geopolymer and Type V Portland Cement Exposed to MgSO4
Mikhailenko, Peter / Arraigada, Martin / Piao, Zhengyin / Poulikakos, Lily D.	Multiscale Laboratory Mechanical Performance of SDA Mixtures with Construction and Demolition Waste Filler
Aljarrah, Mohammad Fuad / Roja, K. Lakshmi / Masad, Eyad / Ouederni, Mabrouk / Ibikunle, Oluwagbemi Banji	Nanostructural and Nanomechanical Properties of LDPE-Modified Binders
Seo, Junwon / Amatya, Ibin / Letcher, Todd / Choi, Eunsoo / Kim, Woosuk	Peel and Cleavage Strength Characteristics of Adhesive versus Welded Connections
Jia, Meng / Zhang, Zengping / Yang, Na / Qi, Bing / Wang, Wentong / Huang, Zhigang / Sun, Jia / Luo, Fangkai / Huang, Ting	Performance Evaluation of Thermosetting and Thermoplastic Polyurethane Asphalt Mixtures
Hu, Mingjun / Ma, Jianmin / Sun, Daquan / Hofko, Bernhard / Mirwald, Johannes / Zheng, Yunpeng / Xu, Lei	Quantifying Weathering-Aging Test Parameters of High Viscosity–Modified Asphalt by Establishing a Conversion Relationship with Standard PAV Aging
Di, Hongfeng / Liu, Songhui / Han, Kang / Luo, Shuqiong / Zhang, Haibo / Wang, Yuli / Guan, Xuemao	Reinforcement of Broken Coal Rock Using Ultrafine Sulfoaluminate Cement–Based Grouting Materials
Arumugam, Dharanidharan / Naik, Dayakar L. / Sajid, Hizb Ullah / Kiran, Ravi	Relationship between Nano and Macroscale Properties of Postfire ASTM A36 Steels
Zhan, Meng / Wang, Xiaoyu / Chen, Xiuyun / Qin, Guangchong	Research on Hysteretic Behavior of Corroded Steel Plate Considering Surface Topography
Kumar, Abhinay / Choudhary, Rajan / Kumar, Ankush	Rheological, Mechanical, and Chemical Characterization of Asphalt Binders and Mixtures with Waste Tire and Plastic Pyrolytic Chars
Wu, Zhipeng / Xu, Jian / Chen, Hui / Shao, Longtan / Zhou, Xiangang / Wang, Songhe	Shear Strength and Mesoscopic Characteristics of Basalt Fiber–Reinforced Loess after Dry–Wet Cycles
Sun, Xinlei / Yi, Yaolin	Stabilization and Solidification of Fine Incineration Bottom Ash of Municipal Solid Waste Using Ground Granulated Blast-Furnace Slag
Liu, Jinzhou / Xu, Jian / Liu, Qi / Wang, Shuyi / Yu, Bin	Steel Slag for Roadway Construction: A Review of Material Characteristics and Application Mechanisms
Gandhi, Jay / Chaudhury, S. K.	A Study on the Potential Use of Red Clay and Fly Ash in the Production of Lightweight Expanded Clay Aggregates for Concrete
Jafari, Khashayar / Yoon, Jinyoung / Tokpatayeva, Raikhan / Olek, Jan / Rajabipour, Farshad	Surfactant-Assisted Purification of an Impure Kaolinite Clay to Improve Its Pozzolanic Reactivity in Concrete
Nguyen, Duy-Liem / Thai, Duc-Kien / Lam, My Ngoc-Tra	Synergy in Flexure of High-Performance Fiber-Reinforced Concrete with Hybrid Steel Fibers
Mohebbi, Alireza / Graybeal, Benjamin / Haber, Zachary	Time-Dependent Properties of Ultrahigh-Performance Concrete: Compressive Creep and Shrinkage
Babagoli, Rezvan / Rezaei, Mohsen	Using Artificial Neural Network Methods for Modeling Moisture Susceptibility of Asphalt Mixture Modified by Nano TiO2
Ramezanianpour, Ali Akbar / Zaeri Amirani, Mohammad Mahdi / Mirvalad, Sajjad	Zeolite Containing Mortars Reinforced with Graphene Oxide Synthesized by Hydrolysis of Tetraethyl Orthosilicate

About this
data sheet
IssueID
61356
Published on:
23/03/2022
Last updated on:
23/03/2022

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Journal of Materials in Civil Engineering (ASCE) - v. 34, n. 6 (June 2022)

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Journal of Materials in Civil Engineering (ASCE) - v. 34, n. 6 (June 2022)

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.