Journal of Materials in Civil Engineering (ASCE) - v. 34, n. 6 (Juni 2022)

Erschienen:	Juni 2022

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Sombra, Thomas Nunes / Haach, Vladimir Guilherme	Application of Acoustic Tests for the Mechanical Characterization of Hollow Masonry Units
Rakhimova, Nailia R. / Morozov, Vladimir P. / Eskin, Aleksey A. / Lutskin, Yevgen S. / Shynkevych, Olena S.	Blended Alkali-Activated Cements Based on Blast-Furnace Slag and Calcined Clays: Statistical Modeling and Effect of Amount and Chemistry of Reactive Phase
El Ghor, Ahmad H. / Morovat, Mohammed Ali / Engelhardt, Michael D. / Hantouche, Elie G.	Creep Behavior of Transverse Welded Lap Joints at Elevated Temperatures
Liu, Yang / Qian, Zhendong / Yang, Yuming / Huang, Qibo / Zhang, Xiangfei	Effect of Curing Reaction Behaviors of Warm Mix Epoxy Asphalt Concrete on Its Field Compaction Characteristics Using Discrete-Element Method
Gao, Danying / Xu, Wenda / Yang, Lin / Meng, Yang / Xie, Jiqiang	Effect of Curing Temperature on the Hydration of Calcium Sulfoaluminate Cement-Ground Granulated Blast Furnace Slag-Gypsum Mixture
You, Nanqiao / Zhu, Guorui / He, Tongtong / Zhang, Yamei	Effect of Predrying Temperature on Carbonation of Alkali-Activated Slag Pastes
Silveira, Mariana Vela / Ferreira, José Wilson dos Santos / Casagrande, Michéle Dal Toé	Effect of Surface Treatment on Natural Aging and Mechanical Behavior of Sisal Fiber–Reinforced Sand Composite
Pires, Vera / Rosa, L. G. / Amaral, P. M. / Dionísio, A. / Simão, J. A. R.	Experimental Studies of the Effect of SO2 on the Mechanical Properties of Selected Cladding Natural Stones
Zhang, Ziyang / Xu, Tengfei / Deng, Kailai / Tong, Teng / Zhou, Hao	Experimental Study on Creep Failure of Non-Steam-Cured Ultrahigh-Performance Concrete under High Uniaxial Compressive Stress
Zhu, Anyou / Wu, Hanli / Liu, Jenny	Feasibility Study on Novel Fire-Resistant Coating Materials
Chen, Gang / Zhao, Liangping / Gao, Danying / Yuan, Jiansong / Bai, Jing / Wang, Weiqiang	Flexural Tensile Behavior of Single and Novel Multiple Hooked-End Steel Fiber–Reinforced Notched Concrete Beams
Pathak, Santanu / Choudhary, Rajan / Kumar, Abhinay / Pattanaik, Madhu Lisha	Friction Characteristics of Open Graded Asphalt Friction Courses with BOF and EAF Steel Slag Aggregates
Zeng, Hang / Hartell, Julie Ann	Identification of Acoustic Emission Signatures and Their Capability to Assess the Damage of Reinforced Concrete Beam under Incremental Cyclic Loading
Emmanuel, Arun C. / Bishnoi, Shashank	Influence of Clinker Replacement and Curing Temperature on Hydration Kinetics, Strength Development, and Phase Assemblage of Fly Ash–Blended Cements
Özer, A. Tolga / Akay, Onur	Interface Shear Strength of EPS-Concrete Elements of Various Configurations
Zhang, Wei / Zhang, Zhengqi / Zhao, Qinsheng	Laboratory Performance Evaluation of a Waterborne Epoxy-Modified Asphalt Mixture with Styrene-Butadiene Rubber for Cold Patching Applications
Wu, Chunli / Li, Liding / Cheng, Yongchun / Gu, Zhengwei / Wang, Haitao / Tan, Xiaoshu / Li, He	Laboratory Study and Simulation Analysis on Anticrack Properties of Open-Graded Friction Course Based on Creep Tests
Wang, Jie / Qin, Yongchun / Xu, Jian / Chang, Rong / Liu, Liping	Microscale Property Evaluation of the Interface between Cement Emulsified Asphalt and Aged Asphalt in Emulsified Asphalt Cold Recycled Mixture
Kong, Y. K. / Chu, S. H.	Modeling the Drying Shrinkage of Cement Paste Prepared with Wastewater
Diab, Aboelkasim / Saboo, Nikhil / You, Lingyun	Moisture, Rutting, and Fatigue-Cracking Susceptibility of Water-Carrying, Wax-Based, and Chemical-Based Warm Mix Asphalt Systems
Padilla, Angel / Genedy, Moneeb / Knight, Earl E. / Rougier, Esteban / Stormont, John / Reda Taha, Mahmoud M.	Monitoring Postpeak Crack Propagation in Concrete in the Brazilian Tension Test
Alanazi, Hani / Kim, Yong-Rak / Hu, Jiong / Little, Dallas N. / Jung, Jong Suk	Multiscale Characterization of Fly Ash–Based Geopolymer and Type V Portland Cement Exposed to MgSO4
Mikhailenko, Peter / Arraigada, Martin / Piao, Zhengyin / Poulikakos, Lily D.	Multiscale Laboratory Mechanical Performance of SDA Mixtures with Construction and Demolition Waste Filler
Aljarrah, Mohammad Fuad / Roja, K. Lakshmi / Masad, Eyad / Ouederni, Mabrouk / Ibikunle, Oluwagbemi Banji	Nanostructural and Nanomechanical Properties of LDPE-Modified Binders
Seo, Junwon / Amatya, Ibin / Letcher, Todd / Choi, Eunsoo / Kim, Woosuk	Peel and Cleavage Strength Characteristics of Adhesive versus Welded Connections
Jia, Meng / Zhang, Zengping / Yang, Na / Qi, Bing / Wang, Wentong / Huang, Zhigang / Sun, Jia / Luo, Fangkai / Huang, Ting	Performance Evaluation of Thermosetting and Thermoplastic Polyurethane Asphalt Mixtures
Hu, Mingjun / Ma, Jianmin / Sun, Daquan / Hofko, Bernhard / Mirwald, Johannes / Zheng, Yunpeng / Xu, Lei	Quantifying Weathering-Aging Test Parameters of High Viscosity–Modified Asphalt by Establishing a Conversion Relationship with Standard PAV Aging
Di, Hongfeng / Liu, Songhui / Han, Kang / Luo, Shuqiong / Zhang, Haibo / Wang, Yuli / Guan, Xuemao	Reinforcement of Broken Coal Rock Using Ultrafine Sulfoaluminate Cement–Based Grouting Materials
Arumugam, Dharanidharan / Naik, Dayakar L. / Sajid, Hizb Ullah / Kiran, Ravi	Relationship between Nano and Macroscale Properties of Postfire ASTM A36 Steels
Zhan, Meng / Wang, Xiaoyu / Chen, Xiuyun / Qin, Guangchong	Research on Hysteretic Behavior of Corroded Steel Plate Considering Surface Topography
Kumar, Abhinay / Choudhary, Rajan / Kumar, Ankush	Rheological, Mechanical, and Chemical Characterization of Asphalt Binders and Mixtures with Waste Tire and Plastic Pyrolytic Chars
Wu, Zhipeng / Xu, Jian / Chen, Hui / Shao, Longtan / Zhou, Xiangang / Wang, Songhe	Shear Strength and Mesoscopic Characteristics of Basalt Fiber–Reinforced Loess after Dry–Wet Cycles
Sun, Xinlei / Yi, Yaolin	Stabilization and Solidification of Fine Incineration Bottom Ash of Municipal Solid Waste Using Ground Granulated Blast-Furnace Slag
Liu, Jinzhou / Xu, Jian / Liu, Qi / Wang, Shuyi / Yu, Bin	Steel Slag for Roadway Construction: A Review of Material Characteristics and Application Mechanisms
Gandhi, Jay / Chaudhury, S. K.	A Study on the Potential Use of Red Clay and Fly Ash in the Production of Lightweight Expanded Clay Aggregates for Concrete
Jafari, Khashayar / Yoon, Jinyoung / Tokpatayeva, Raikhan / Olek, Jan / Rajabipour, Farshad	Surfactant-Assisted Purification of an Impure Kaolinite Clay to Improve Its Pozzolanic Reactivity in Concrete
Nguyen, Duy-Liem / Thai, Duc-Kien / Lam, My Ngoc-Tra	Synergy in Flexure of High-Performance Fiber-Reinforced Concrete with Hybrid Steel Fibers
Mohebbi, Alireza / Graybeal, Benjamin / Haber, Zachary	Time-Dependent Properties of Ultrahigh-Performance Concrete: Compressive Creep and Shrinkage
Babagoli, Rezvan / Rezaei, Mohsen	Using Artificial Neural Network Methods for Modeling Moisture Susceptibility of Asphalt Mixture Modified by Nano TiO2
Ramezanianpour, Ali Akbar / Zaeri Amirani, Mohammad Mahdi / Mirvalad, Sajjad	Zeolite Containing Mortars Reinforced with Graphene Oxide Synthesized by Hydrolysis of Tetraethyl Orthosilicate

Über diese
Datenseite
IssueID
61356
Veröffentlicht am:
23.03.2022
Geändert am:
23.03.2022

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Journal of Materials in Civil Engineering (ASCE) - v. 34, n. 6 (Juni 2022)

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Journal of Materials in Civil Engineering (ASCE) - v. 34, n. 6 (Juni 2022)

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.