Journal of Constructional Steel Research - September 2018

Published:	September 2018

Articles in this Issue

Author(s)	Title	Page(s)
Wang, Weiyong / Zhang, Linbo / Ge, Yong / Xu, Lei	Behaviour of restrained high strength steel columns at elevated temperature	251-264
Motallebi, Mohammad / Lignos, Dimitrios G. / Rogers, Colin A.	Behaviour of stiffened extended shear tab connections under gravity induced shear force	336-350
Elsawaf, Sherif A. / Hassan, Maha M.	Behaviour of structural sub-assemblies of steel beams with openings in fire conditions	627-638
Fasaee, Mohammad Ali Khaksar / Banan, Mohammad Reza / Ghazizadeh, Sina	Capacity of exposed column base connections subjected to uniaxial and biaxial bending moments	361-370
Dai, Liusi / Zhao, Xianzhong / Rasmussen, Kim J. R.	Cyclic performance of steel storage rack beam-to-upright bolted connections	28-48
Junda, E. / Leelataviwat, S. / Doung, P.	Cyclic testing and performance evaluation of buckling-restrained knee-braced frames	154-164
Francavilla, Antonella B. / Latour, Massimo / Piluso, Vincenzo / Rizzano, Gianvittorio	Design of full-strength full-ductility extended end-plate beam-to-column joints	77-96
Grilo, Lucas Figueiredo / Fakury, Ricardo Hallal / de Castro e Silva, Ana Lydia Reis / de Souza Veríssimo, Gustavo	Design procedure for the web-post buckling of steel cellular beams	525-541
Wang, Hao / Xu, Shanhua / Wang, Youde / Li, Anbang	Effect of pitting degradation on ductile fracture initiation of steel butt-welded joints	436-449
Xu, Zhaoyu / Tong, Genshu / Zhang, Lei	Elastic and elastic-plastic threshold stiffness of stiffened steel plate walls in compression	138-153
Feng, Yulong / Zhang, Zhi / Chong, Xun / Wu, Jing / Meng, Shaoping	Elastic displacement spectrum-based design of damage-controlling BRBFs with rocking walls	691-706
Wu, Bo / Cao, Jia-Li / Kang, Lan	End patch loading behavior and strengthening of locally corroded steel I-beams	371-382
Kavoura, F. / Gencturk, B. / Dawood, M.	Evaluation of existing provisions for design of "pinned" column base-plate connections	233-250
Aghlara, Reza / Tahir, Mahmood Md. / Adnan, Azlan bin	Experimental study of Pipe-Fuse Damper for passive energy dissipation in structures	351-360
Huang, Shao-Teng / Huang, Yan-Sheng / He, An / Tang, Xu-Lin / Chen, Qing-Jun / Liu, Xinpei / Cai, Jian	Experimental study on seismic behaviour of an innovative composite shear wall	165-179
Cao, Xianlei / Xu, Yong / Wang, Min / Zhao, Geng / Gu, Lixiang / Kong, Zhengyi	Experimental study on the residual stresses of 800 MPa high strength steel welded box sections	720-727
Liu, Yanzhi / Chen, Jian / Zhang, Xiaofei / Tan, Ding	Fatigue behaviour of blind bolts under tensile cyclic loads	16-27
Jie, Zhiyu / Li, Yadong / Wei, Xing / Zhuge, Ping	Fatigue life prediction of welded joints with artificial corrosion pits based on continuum damage mechanics	542-550
Cui, Chuang / Zhang, Qinghua / Bao, Yi / Kang, Jiping / Bu, Yizhi	Fatigue performance and evaluation of welded joints in steel truss bridges	450-456
Zhou, Xuhong / Li, Jingchao / He, Yongjun / He, Ziqi / Li, Zhanjie	Finite element analysis of thermal residual stresses in castellated beams	741-755
Hu, Jiayu / Usmani, Asif / Sanad, Abdel / Carvel, Ricky	Fire resistance of composite steel & concrete highway bridges	707-719
Javed, Muhammad Faisal / Sulong, N. H. Ramli / Memon, Shazim Ali / Rehman, Sardar Kashif-Ur / Khan, Niaz Bahadur	Flexural behaviour of steel hollow sections filled with concrete that contains OPBC as coarse aggregate	287-294
Elkhabeery, Omar H. / Safar, Sherif S. / Mourad, Sherif A.	Flexural strength of steel I-beams reinforced with CFRP sheets at tension flange	572-588
Chen, Yueshi / Wang, Wei / Chen, Yiyi	Full-scale shake table tests of the tension-only concentrically braced steel beam-through frame	611-626
Tahir, Mahmood Md. / Mohammadhosseini, Hossein / Ngian, Shek Poi / Effendi, Mahmud Kori	I-beam to square hollow column blind bolted moment connection: Experimental and numerical study	383-398
Ladinek, M. / Niederwanger, A. / Lang, R.	An individual fatigue assessment approach considering real notch strains and local hardness applied to welded joints	314-325
Tartaglia, Roberto / D'Aniello, Mario / Landolfo, Raffaele	The influence of rib stiffeners on the response of extended end-plate joints	669-690
Zhang, Qinghua / Jia, Donglin / Bao, Yi / Cheng, Zhenyu / Xiao, Lin / Bu, Yizhi	Internal force transfer effect-based fatigue damage evaluation for PBL shear connector groups	469-478
Nie, Shidong / Zhu, Qian / Yang, Bo / Li, Pengcheng	Investigation of residual stresses in Q460GJ steel plates from medium-walled box sections	728-740
Zhang, Wenying / Mahdavian, Mahsa / Yu, Cheng	Lateral strength and deflection of cold-formed steel shear walls using corrugated sheathing	399-408
Bu, Y. / Gardner, L.	Local stability of laser-welded stainless steel I-sections in bending	49-64
Fang, Han / Chan, Tak-Ming / Young, Ben	Material properties and residual stresses of octagonal high strength steel hollow sections	479-490
Lasheen, Mahmoud / Shaat, Amr / Khalil, Ayman	Numerical evaluation for the effective slab width of steel-concrete composite beams	124-137
Mou, Ben / Li, Xi / Bai, Yongtao / He, Baojie / Patel, V. I.	Numerical evaluation on shear behavior of irregular steel beam-to-CFST column connections	422-435
Zhou, Peng / Guo, Yan-Lin / Pi, Yong-Lin	Numerical investigations of multiple cross-arm pre-tensioned cable stayed BRBs with pin-ended stays	206-232
Bravo-Haro, M. A. / Elghazouli, A. Y.	Permanent seismic drifts in steel moment frames	589-610
Yahyazadeh, A. / Yakhchalian, M.	Probabilistic residual drift assessment of SMRFs with linear and nonlinear viscous dampers	409-421
Arzeytoon, Ali / Toufigh, Vahab	Probabilistic seismic performance assessment of ribbed bracing systems	326-335
Alves, Ana Rita / Isabel, B. Valente / Washintgon, B. Vieira / Gustavo, S. Veríssimo	Prospective study on the behaviour of composite beams with an indented shear connector	508-524
Hu, Ying / Yang, Cheng Bo / Teh, Lip H. / Yang, Yeong-bin	Reduction factors for stainless steel bolts at elevated temperatures	198-205
Li, Hai-Ting / Young, Ben	Residual mechanical properties of high strength steels after exposure to fire	562-571
Shen, Wei / Yan, Ren-jun / Lin, Yue / Fu, He-qi	Residual stress analysis of hull plate in multi-point forming	65-76
Kheyroddin, Ali / Mashhadiali, Niloufar	Response modification factor of concentrically braced frames with hexagonal pattern of braces	658-668
Shakil, Saani / Lu, Wei / Puttonen, Jari	Response of high-strength steel beam and single-storey frame in fire: Numerical simulation	551-561
Perera, Nilakshi / Mahendran, Mahen	Section moment capacity tests of hollow flange steel plate girders	97-111
Xu, Tengfei / Zheng, Di / Yang, Cheng / Deng, Kailai	Seismic performance evaluation of damage tolerant steel frame with composite steel-UHPC joint	457-468
Chen, Cheng-Cheng / Salim, Charles Julius / Tiara, Rudy	Seismic performance of wide flange steel beams partly covered by side plates	275-286
Güneyisi, Esra Mete / Deringöl, Ahmet Hilmi	Seismic response of friction damped and base-isolated frames considering serviceability limit state	639-657
Li, Pengcheng / Liang, Ce / Yuan, Jun / Qiao, Ke	Stability of steel columns stiffened by stays and multiple crossarms	189-197
Shao, Xudong / Qu, Wantong / Cao, Junhui / Yao, Youlin	Static and fatigue properties of the steel-UHPC lightweight composite bridge deck with large U ribs	491-507
Ladinek, M. / Niederwanger, A. / Lang, R. / Schmid, J. / Timmers, R. / Lener, G.	The strain-life approach applied to welded joints: Considering the real weld geometry	180-188
Yin, Yue / Liu, Xiaofan / Lei, Peng / Zhou, Liang	Stress concentration factor for tubular CHS-to-RHS Y-joints under axial loads	768-778
Zaher, O. F. / Yossef, N. M. / El-Boghdadi, M. H. / Dabaon, M. A.	Structural behaviour of arched steel beams with cellular openings	756-767
Tang, Yun-Chao / Li, Li-Juan / Feng, Wen-Xian / Liu, Feng / Zhu, Ming	Study of seismic behavior of recycled aggregate concrete-filled steel tubular columns	1-15
Yun, X. / Gardner, L. / Boissonnade, N.	Ultimate capacity of I-sections under combined loading – Part 2: Parametric studies and CSM design	265-274
Yu, Min / Xu, Haoming / Ye, Jianqiao / Chi, Yin	A unified interaction equation for strength and global stability of solid and hollow concrete-filled steel tube columns under room and elevated temperatures	304-313
Nzabonimpa, J. D. / Hong, Won-Kee	Use of artificial damping factors to enhance numerical stability for irregular joints	295-303
Skalomenos, Konstantinos A. / Kurata, Masahiro / Shimada, Hironari / Nishiyama, Minehiro	Use of induction-heating in steel structures: Material properties and novel brace design	112-123

About this
data sheet
IssueID
28211
Published on:
01/03/2019
Last updated on:
03/08/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Journal of Constructional Steel Research - September 2018

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Journal of Constructional Steel Research - September 2018

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.