Journal of Constructional Steel Research - September 2018

Erschienen:	September 2018

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Wang, Weiyong / Zhang, Linbo / Ge, Yong / Xu, Lei	Behaviour of restrained high strength steel columns at elevated temperature	251-264
Motallebi, Mohammad / Lignos, Dimitrios G. / Rogers, Colin A.	Behaviour of stiffened extended shear tab connections under gravity induced shear force	336-350
Elsawaf, Sherif A. / Hassan, Maha M.	Behaviour of structural sub-assemblies of steel beams with openings in fire conditions	627-638
Fasaee, Mohammad Ali Khaksar / Banan, Mohammad Reza / Ghazizadeh, Sina	Capacity of exposed column base connections subjected to uniaxial and biaxial bending moments	361-370
Dai, Liusi / Zhao, Xianzhong / Rasmussen, Kim J. R.	Cyclic performance of steel storage rack beam-to-upright bolted connections	28-48
Junda, E. / Leelataviwat, S. / Doung, P.	Cyclic testing and performance evaluation of buckling-restrained knee-braced frames	154-164
Francavilla, Antonella B. / Latour, Massimo / Piluso, Vincenzo / Rizzano, Gianvittorio	Design of full-strength full-ductility extended end-plate beam-to-column joints	77-96
Grilo, Lucas Figueiredo / Fakury, Ricardo Hallal / de Castro e Silva, Ana Lydia Reis / de Souza Veríssimo, Gustavo	Design procedure for the web-post buckling of steel cellular beams	525-541
Wang, Hao / Xu, Shanhua / Wang, Youde / Li, Anbang	Effect of pitting degradation on ductile fracture initiation of steel butt-welded joints	436-449
Xu, Zhaoyu / Tong, Genshu / Zhang, Lei	Elastic and elastic-plastic threshold stiffness of stiffened steel plate walls in compression	138-153
Feng, Yulong / Zhang, Zhi / Chong, Xun / Wu, Jing / Meng, Shaoping	Elastic displacement spectrum-based design of damage-controlling BRBFs with rocking walls	691-706
Wu, Bo / Cao, Jia-Li / Kang, Lan	End patch loading behavior and strengthening of locally corroded steel I-beams	371-382
Kavoura, F. / Gencturk, B. / Dawood, M.	Evaluation of existing provisions for design of "pinned" column base-plate connections	233-250
Aghlara, Reza / Tahir, Mahmood Md. / Adnan, Azlan bin	Experimental study of Pipe-Fuse Damper for passive energy dissipation in structures	351-360
Huang, Shao-Teng / Huang, Yan-Sheng / He, An / Tang, Xu-Lin / Chen, Qing-Jun / Liu, Xinpei / Cai, Jian	Experimental study on seismic behaviour of an innovative composite shear wall	165-179
Cao, Xianlei / Xu, Yong / Wang, Min / Zhao, Geng / Gu, Lixiang / Kong, Zhengyi	Experimental study on the residual stresses of 800 MPa high strength steel welded box sections	720-727
Liu, Yanzhi / Chen, Jian / Zhang, Xiaofei / Tan, Ding	Fatigue behaviour of blind bolts under tensile cyclic loads	16-27
Jie, Zhiyu / Li, Yadong / Wei, Xing / Zhuge, Ping	Fatigue life prediction of welded joints with artificial corrosion pits based on continuum damage mechanics	542-550
Cui, Chuang / Zhang, Qinghua / Bao, Yi / Kang, Jiping / Bu, Yizhi	Fatigue performance and evaluation of welded joints in steel truss bridges	450-456
Zhou, Xuhong / Li, Jingchao / He, Yongjun / He, Ziqi / Li, Zhanjie	Finite element analysis of thermal residual stresses in castellated beams	741-755
Hu, Jiayu / Usmani, Asif / Sanad, Abdel / Carvel, Ricky	Fire resistance of composite steel & concrete highway bridges	707-719
Javed, Muhammad Faisal / Sulong, N. H. Ramli / Memon, Shazim Ali / Rehman, Sardar Kashif-Ur / Khan, Niaz Bahadur	Flexural behaviour of steel hollow sections filled with concrete that contains OPBC as coarse aggregate	287-294
Elkhabeery, Omar H. / Safar, Sherif S. / Mourad, Sherif A.	Flexural strength of steel I-beams reinforced with CFRP sheets at tension flange	572-588
Chen, Yueshi / Wang, Wei / Chen, Yiyi	Full-scale shake table tests of the tension-only concentrically braced steel beam-through frame	611-626
Tahir, Mahmood Md. / Mohammadhosseini, Hossein / Ngian, Shek Poi / Effendi, Mahmud Kori	I-beam to square hollow column blind bolted moment connection: Experimental and numerical study	383-398
Ladinek, M. / Niederwanger, A. / Lang, R.	An individual fatigue assessment approach considering real notch strains and local hardness applied to welded joints	314-325
Tartaglia, Roberto / D'Aniello, Mario / Landolfo, Raffaele	The influence of rib stiffeners on the response of extended end-plate joints	669-690
Zhang, Qinghua / Jia, Donglin / Bao, Yi / Cheng, Zhenyu / Xiao, Lin / Bu, Yizhi	Internal force transfer effect-based fatigue damage evaluation for PBL shear connector groups	469-478
Nie, Shidong / Zhu, Qian / Yang, Bo / Li, Pengcheng	Investigation of residual stresses in Q460GJ steel plates from medium-walled box sections	728-740
Zhang, Wenying / Mahdavian, Mahsa / Yu, Cheng	Lateral strength and deflection of cold-formed steel shear walls using corrugated sheathing	399-408
Bu, Y. / Gardner, L.	Local stability of laser-welded stainless steel I-sections in bending	49-64
Fang, Han / Chan, Tak-Ming / Young, Ben	Material properties and residual stresses of octagonal high strength steel hollow sections	479-490
Lasheen, Mahmoud / Shaat, Amr / Khalil, Ayman	Numerical evaluation for the effective slab width of steel-concrete composite beams	124-137
Mou, Ben / Li, Xi / Bai, Yongtao / He, Baojie / Patel, V. I.	Numerical evaluation on shear behavior of irregular steel beam-to-CFST column connections	422-435
Zhou, Peng / Guo, Yan-Lin / Pi, Yong-Lin	Numerical investigations of multiple cross-arm pre-tensioned cable stayed BRBs with pin-ended stays	206-232
Bravo-Haro, M. A. / Elghazouli, A. Y.	Permanent seismic drifts in steel moment frames	589-610
Yahyazadeh, A. / Yakhchalian, M.	Probabilistic residual drift assessment of SMRFs with linear and nonlinear viscous dampers	409-421
Arzeytoon, Ali / Toufigh, Vahab	Probabilistic seismic performance assessment of ribbed bracing systems	326-335
Alves, Ana Rita / Isabel, B. Valente / Washintgon, B. Vieira / Gustavo, S. Veríssimo	Prospective study on the behaviour of composite beams with an indented shear connector	508-524
Hu, Ying / Yang, Cheng Bo / Teh, Lip H. / Yang, Yeong-bin	Reduction factors for stainless steel bolts at elevated temperatures	198-205
Li, Hai-Ting / Young, Ben	Residual mechanical properties of high strength steels after exposure to fire	562-571
Shen, Wei / Yan, Ren-jun / Lin, Yue / Fu, He-qi	Residual stress analysis of hull plate in multi-point forming	65-76
Kheyroddin, Ali / Mashhadiali, Niloufar	Response modification factor of concentrically braced frames with hexagonal pattern of braces	658-668
Shakil, Saani / Lu, Wei / Puttonen, Jari	Response of high-strength steel beam and single-storey frame in fire: Numerical simulation	551-561
Perera, Nilakshi / Mahendran, Mahen	Section moment capacity tests of hollow flange steel plate girders	97-111
Xu, Tengfei / Zheng, Di / Yang, Cheng / Deng, Kailai	Seismic performance evaluation of damage tolerant steel frame with composite steel-UHPC joint	457-468
Chen, Cheng-Cheng / Salim, Charles Julius / Tiara, Rudy	Seismic performance of wide flange steel beams partly covered by side plates	275-286
Güneyisi, Esra Mete / Deringöl, Ahmet Hilmi	Seismic response of friction damped and base-isolated frames considering serviceability limit state	639-657
Li, Pengcheng / Liang, Ce / Yuan, Jun / Qiao, Ke	Stability of steel columns stiffened by stays and multiple crossarms	189-197
Shao, Xudong / Qu, Wantong / Cao, Junhui / Yao, Youlin	Static and fatigue properties of the steel-UHPC lightweight composite bridge deck with large U ribs	491-507
Ladinek, M. / Niederwanger, A. / Lang, R. / Schmid, J. / Timmers, R. / Lener, G.	The strain-life approach applied to welded joints: Considering the real weld geometry	180-188
Yin, Yue / Liu, Xiaofan / Lei, Peng / Zhou, Liang	Stress concentration factor for tubular CHS-to-RHS Y-joints under axial loads	768-778
Zaher, O. F. / Yossef, N. M. / El-Boghdadi, M. H. / Dabaon, M. A.	Structural behaviour of arched steel beams with cellular openings	756-767
Tang, Yun-Chao / Li, Li-Juan / Feng, Wen-Xian / Liu, Feng / Zhu, Ming	Study of seismic behavior of recycled aggregate concrete-filled steel tubular columns	1-15
Yun, X. / Gardner, L. / Boissonnade, N.	Ultimate capacity of I-sections under combined loading – Part 2: Parametric studies and CSM design	265-274
Yu, Min / Xu, Haoming / Ye, Jianqiao / Chi, Yin	A unified interaction equation for strength and global stability of solid and hollow concrete-filled steel tube columns under room and elevated temperatures	304-313
Nzabonimpa, J. D. / Hong, Won-Kee	Use of artificial damping factors to enhance numerical stability for irregular joints	295-303
Skalomenos, Konstantinos A. / Kurata, Masahiro / Shimada, Hironari / Nishiyama, Minehiro	Use of induction-heating in steel structures: Material properties and novel brace design	112-123

Über diese
Datenseite
IssueID
28211
Veröffentlicht am:
01.03.2019
Geändert am:
03.08.2019

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Journal of Constructional Steel Research - September 2018

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Journal of Constructional Steel Research - September 2018

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.