Journal of Building Engineering - July 2020

Published:	July 2020

Articles in this Issue

Author(s)	Title	Page(s)
Lee, Swoo-Heon / Abolmaali, Ali / Shin, Kyung-Jae / Lee, Hee-Du	ABAQUS modeling for post-tensioned reinforced concrete beams	101273
Statkic, Sasa / Jovanovic, Bojan / Micic, Aleksandar / Arsic, Nebojsa / Jović, Srđan	Adaptive neuro fuzzy selection of the most important factors for photovoltaic pumping system performance prediction	101242
Tena-Colunga, Arturo / Liga-Paredes, Angel Eduardo	Approximation of lateral stiffness for walls with two bands of openings considering slab stiffness effects	101310
Afroz, Sumaiya / Manzur, Tanvir / Hossain, Khandaker M. Anwar	Arrowroot as bio-admixture for performance enhancement of concrete	101313
Saleem, Muhammad	Assessing the load carrying capacity of concrete anchor bolts using non-destructive tests and artificial multilayer neural network	101260
Chu, Wen-Xiao / Wang, Rui / Hsu, Po-Hao / Wang, Chi-Chuan	Assessment on rack intake flowrate uniformity of data center with cold aisle containment configuration	101331
Chrysanidis, Theodoros / Tegos, Ioannis A.	Axial and transverse strengthening of R/C circular columns: Conventional and new type of steel and hybrid jackets using high-strength mortar	101236
Wang, Wanqian / Wang, Jingfeng / Zhao, Peng / Ja, Lili / Pan, Guangdong	Axial compressive experiments and structural behaviour estimation of CFS composite walls sprayed with LPM	101305
Cai, Jingming / Pan, Jinlong / Tan, Jiawei / Vandevyvere, Brecht / Li, Xiaopeng	Behavior of ECC-encased CFST columns under eccentric loading	101188
Li, Shengcai / Zhou, Zhongchen / Luo, Hongzhen / Milani, Gabriele / Abruzzese, Donato	Behavior of traditional Chinese mortise-tenon joints: Experimental and numerical insight for coupled vertical and reversed cyclic horizontal loads	101257
Saranya, P. / Nagarajan, Praveen / Shashikala, A. P.	Behaviour of GGBS-dolomite geopolymer concrete short column under axial loading	101232
Cunha, Filipe O. / Oliveira, Armando C.	Benchmarking for realistic nZEB hotel buildings	101298
Habib, Muhammad Farhan / Ali, Muzaffar / Sheikh, Nadeem Ahmed / Badar, Abdul Waheed / Mehmood, Sajid	Building thermal load management through integration of solar assisted absorption and desiccant air conditioning systems: A model-based simulation-optimization approach	101279
Ruiz, L. G. B. / Pegalajar, M. C. / Molina-Solana, M. / Guo, Yi-Ke	A case study on understanding energy consumption through prediction and visualization (VIMOEN)	101315
Tao, Yiqi / Gou, Zhonghua / Yu, Zhongqi / Fu, Jiayan / Chen, Xiaowei	The challenge of creating age-friendly indoor environments in a high-density city: Case study of Hong Kong’s care and attention homes	101280
Pedroso, Marco / Flores-Colen, Inês / Silvestre, José Dinis / Gomes, M. Glória / Silva, Luis / Sequeira, Pedro / de Brito, Jorge	Characterisation of a multilayer external wall thermal insulation system. Application in a Mediterranean climate	101265
Careddu, Nicola	Chromaticism differentiations: A study of the diversified aesthetic appeal of the Ghiandone granite range	101300
Doğramacı, Pervin Abohorlu / Aydın, Devrim	Comparative experimental investigation of novel organic materials for direct evaporative cooling applications in hot-dry climate	101240
Li, Zhengrong / Zhang, Dongkai / Chen, Xiangyun / Li, Cui	A comparative study on energy saving and economic efficiency of different cooling terminals based on exergy analysis	101224
Asfour, Omar S.	A comparison between the daylighting and energy performance of courtyard and atrium buildings considering the hot climate of Saudi Arabia	101299
Bilgin, Huseyin / Hysenlliu, Marjo	Comparison of near and far-fault ground motion effects on low and mid-rise masonry buildings	101248
Zheng, Tengteng / Yan, Hongzhen / Li, Shuai / Cheng, Yanpeng / Zou, Liuxiao / Hu, Yingcheng	Compressive behavior and failure modes of the wood-based double X-type lattice sandwich structure	101176
Khan, Mehran / Cao, Mingli / Ali, Majid	Cracking behaviour and constitutive modelling of hybrid fibre reinforced concrete	101272
Mohammadhosseini, Hossein / Alyousef, Rayed / Lim, Nor Hasanah Abdul Shukor / Tahir, Mahmood Md / Alabduljabbar, Hisham / Mohamed, Abdeliazim Mustafa	Creep and drying shrinkage performance of concrete composite comprising waste polypropylene carpet fibres and palm oil fuel ash	101250
Díaz, C. / Cornadó, C. / Albareda, A.	Damage in face-brick facades placed between concrete slabs	101312
Gavali, Hindavi R. / Ralegaonkar, Rahul V.	Design development of sustainable alkali-activated bricks	101302
Moghtadernejad, Saviz / Chouinard, Luc E. / Mirza, M. Saeed	Design strategies using multi-criteria decision-making tools to enhance the performance of building façades	101274
Barg, Steve / Flager, Forest / Fischer, Martin	A design-focused, cost-ranked, structural-frame sizing optimization	101269
Cui, Zhaoyan / Xu, Ming / Tu, Liuhui / Chen, Zhongfan / Hui, Botao	Determination of dowel-bearing strength of laminated bamboo at elevated temperatures	101258
Atmaca, A. B. / Gedik, G. Zorer	Determination of thermal comfort of religious buildings by measurement and survey methods: Examples of mosques in a temperate-humid climate	101246
Rumman, R. / Bari, M. S. / Manzur, T. / Kamal, M. R. / Noor, M. A.	A Durable Concrete Mix Design Approach using Combined Aggregate Gradation Bands and Rice Husk Ash Based Blended Cement	101303
Nik-Bakht, Mazdak / Orenga Panizza, Rafaela / Hudon, Philippe / Chassain, Pierre-Yves / Bashari, Masoud	Economy-energy trade off automation – A decision support system for building design development	101222
Truong, Tam T. / Dinh-Cong, D. / Lee, Jaehong / Nguyen-Thoi, T.	An effective deep feedforward neural networks (DFNN) method for damage identification of truss structures using noisy incomplete modal data	101244
Alkhalidi, Ammar / Hatuqay, Dina	Energy efficient 3D printed buildings: Material and techniques selection worldwide study	101286
Lu, Daniel B. / Warsinger, David M.	Energy savings of retrofitting residential buildings with variable air volume systems across different climates	101223
Tahsildoost, Mohammad / Zomorodian, ZahraSadat	Energy, carbon, and cost analysis of rural housing retrofit in different climates	101277
Yakhchalian, Masood / Asgarkhani, Neda / Yakhchalian, Mansoor	Evaluation of deflection amplification factor for steel buckling restrained braced frames	101228
Parameshwaran, R. / Kumar, G. Naveen / Ram, V. Vinayaka	Experimental analysis of hybrid nanocomposite-phase change material embedded cement mortar for thermal energy storage	101297
Marchione, Francesco / Munafò, Placido	Experimental strength evaluation of glass/aluminum double-lap adhesive joints	101284
Arevalo, Sergio / Tomlinson, Douglas	Experimental thermal bowing response of precast concrete insulated wall panels with stiff shear connectors and simple supports	101319
Lee, Joohyun / McCuskey Shepley, Mardelle / Choi, Jungmann	Exploring the localization process of low energy residential buildings: A case study of Korean passive houses	101290
Gharsellaoui, Sondes / Mansouri, Majdi / Trabelsi, Mohamed / Refaat, Shady S. / Messaoud, Hassani	Fault diagnosis of heating systems using multivariate feature extraction based machine learning classifiers	101221
Shahbazpanahi, Shahriar / Faraj, Rabar H.	Feasibility study on the use of shell sunflower ash and shell pumpkin ash as supplementary cementitious materials in concrete	101271
Nicolao, E. S. / Leiva, P. / Chalapud, M. C. / Ruseckaite, R. A. / Ciannamea, E. M. / Stefani, P. M.	Flexural and tensile properties of biobased rice husk-jute-soybean protein particleboards	101261
Zeng, Jun-Jie / Zhang, Xi-Wen / Chen, Guang-Ming / Wang, Xiao-Meng / Jiang, Tao	FRP-confined recycled glass aggregate concrete: Concept and axial compressive behavior	101288
Hamsavathi, K. / Prakash, K. Soorya / Kavimani, V.	Green high strength concrete containing recycled Cathode Ray Tube Panel Plastics (E-waste) as coarse aggregate in concrete beams for structural applications	101192
Balali, Amirhossein / Hakimelahi, Ali / Valipour, Alireza	Identification and prioritization of passive energy consumption optimization measures in the building industry: An Iranian case study	101239
Merzoug, Wissam / Chergui, Samia / Zouaoui, Mustapha Cheikh	The impact of reinforced concrete on the modern-day architectural heritage of Algeria	101210
Pérez-Bella, J. M. / Domínguez-Hernández, J. / Cano-Suñén, E. / Alonso-Martínez, M. / Del Coz-Díaz, J. J.	Improvement of a functional method to determine the design thermal transmittance of building façades. Implementation in southern Spain	101231
Dinis, Fábio Matoseiro / Sanhudo, Luís / Poças Martins, João / Ramos, Nuno M. M.	Improving project communication in the architecture, engineering and construction industry: Coupling virtual reality and laser scanning	101287
Lin, Run-Sheng / Park, Ki-Bong / Wang, Xiao-Yong / Zhang, Gui-yu	Increasing the early strength of high-volume Hwangtoh–cement systems using bassanite	101317
Serrano-Jiménez, Antonio / Lizana, Jesús / Molina-Huelva, Marta / Barrios-Padura, Ángela	Indoor environmental quality in social housing with elderly occupants in Spain: Measurement results and retrofit opportunities	101264
Rasouli, Alireza / Toopchi-Nezhad, Hamid	The influence of confined water on blast response of reinforced concrete slabs: Experimental investigation	101285
Chen, Pang / Zhou, Xianyu / Zheng, Wenzhong / Wang, Ying / Bao, Bisheng	Influence of high sustained loads and longitudinal reinforcement on long-term deformation of reinforced concrete beams	101241
Eltayeb, Essam / Ma, Xing / Zhuge, Yan / Youssf, Osama / Mills, Julie E.	Influence of rubber particles on the properties of foam concrete	101217
Pan, Mi / Linner, Thomas / Pan, Wei / Cheng, Hui-min / Bock, Thomas	Influencing factors of the future utilisation of construction robots for buildings: A Hong Kong perspective	101220
Kooshafar, Mohammad / Madani, Hesam	An investigation on the influence of nano silica morphology on the characteristics of cement composites	101293
Murad, Yasmin	Joint shear strength models for exterior RC beam-column connections exposed to biaxial and uniaxial cyclic loading	101225
Weerasinghe, Pasindu / Nguyen, Kate / Mendis, Priyan / Guerrieri, Maurice	Large-scale experiment on the behaviour of concrete flat slabs subjected to standard fire	101255
Grazieschi, Gianluca / Gori, Paola / Lombardi, Lidia / Asdrubali, Francesco	Life cycle energy minimization of autonomous buildings	101229
Croom, Brendan / Rajan, Sreehari / Matta, Fabio / Aleshin, Artem / Myers, Troy / Sutton, Michael A.	Modeling of asphalt roof shingle structures with dual sealant strips; optimization for improved delamination resistance under high wind loads	101266
Srivanit, Manat / Jareemit, Daranee	Modeling the influences of layouts of residential townhouses and tree-planting patterns on outdoor thermal comfort in Bangkok suburb	101262
Schwantes-Cezario, Nicole / Ferreira Nogueira Camargo, Geovana Souza / Franco do Couto, Álisson / Porto, Maria Fernanda / Cremasco, Lucca Vieira / Andrello, Avacir Casanova / Toralles, Berenice Martins	Mortars with the addition of bacterial spores: Evaluation of porosity using different test methods	101235
Bengar, Habib Akbarzadeh / Shahmansouri, Amir Ali	A new anchorage system for CFRP strips in externally strengthened RC continuous beams	101230
Wagiman, Khairul Rijal / Abdullah, Mohd Noor / Hassan, Mohammad Yusri / Radzi, Nur Hanis Mohammad	A new optimal light sensor placement method of an indoor lighting control system for improving energy performance and visual comfort	101295
Obaidat, Yasmeen Taleb / Ashteyat, Ahmed M. / Obaidat, Ala' Taleb / Alfaris, Suhaib F.	A new technique for repairing reinforced concrete columns	101256
Li, Yao / Yin, Shiping / Dai, Junyan / Liu, Ming	Numerical investigation on the influences of different factors on the seismic performance of TRC-strengthened RC columns	101245
Chen, Dengyi / Hu, Xiaochun / Meng, Dan / Leto, Sebastian	Optimal consumption modeling of multi–chiller system using a robust optimization algorithm with considering the measurement, control and threshold uncertainties	101263
Ahmadi, Somayeh / Fakehi, Amir Hossien / Vakili, Ali / Moeini-Aghtaie, Moein	An optimization model for the long-term energy planning based on useful energy, economic and environmental pollution reduction in residential sector: A case of Iran	101247
Lu, Jiang / Xue, Yucong / Wang, Zhi / Fan, Yifan	Optimized mitigation of heat loss by avoiding wall-to-floor thermal bridges in reinforced concrete buildings	101214
Huseien, Ghasan Fahim / Shah, Kwok Wei	Performance evaluation of alkali-activated mortars containing industrial wastes as surface repair materials	101234
Xu, Jinjun / Wang, Yumei / Ren, Rui / Wu, Zhanjing / Ozbakkaloglu, Togay	Performance evaluation of recycled aggregate concrete-filled steel tubes under different loading conditions: Database analysis and modelling	101308
Amrani, Mustapha / Taha, Yassine / Kchikach, Azzouz / Benzaazoua, Mostafa / Hakkou, Rachid	Phosphogypsum recycling: New horizons for a more sustainable road material application	101267
Momoh, Emmanuel Owoichoechi / Osofero, Adelaja Israel / Martinez-felipe, Alfonso / Hamzah, Fazlena	Physico-mechanical behaviour of Oil Palm Broom Fibres (OPBF) as eco-friendly building material	101208
Khalaf, Mohammed A. / Ban, Cheah Chee / Ramli, Mahyuddin / Ahmed, Naser M. / Sern, Lim Jay / Khaleel, Hawraa Ali	Physicomechanical and gamma-ray shielding properties of high-strength heavyweight concrete containing steel furnace slag aggregate	101306
Yasmeen, Sadia / Liu, Hong / Wu, Yuxin / Li, Baizhan	Physiological responses of acclimatized construction workers during different work patterns in a hot and humid subtropical area of China	101281
Zhang, Junfei / Li, Dong / Wang, Yuhang	Predicting uniaxial compressive strength of oil palm shell concrete using a hybrid artificial intelligence model	101282
Lizarazo-Marriaga, Juan / Higuera, Camilo / Guzmán, Isaías / Fonseca, Leonardo	Probabilistic modeling to predict fly-ash concrete corrosion initiation	101296
Shubbar, Ali Abdulhussein / Jafer, Hassnen / Abdulredha, Muhammad / Al-Khafaji, Zainab S. / Nasr, Mohammed Salah / Al Masoodi, Zainab / Sadique, Monower	Properties of cement mortar incorporated high volume fraction of GGBFS and CKD from 1 day to 550 days	101327
Kalhor, Koosha / Ememinejad, Newsha	Qualitative and quantitative optimization of thermal insulation materials: Insights from the market and energy codes	101275
Hong, Chaokun / Li, Haitao / Xiong, Zhenhua / Lorenzo, Rodolfo / Corbi, Ileana / Corbi, Ottavia / Wei, Dongdong / Yuan, Conggan / Yang, Dong / Zhang, Huizhong	Review of connections for engineered bamboo structures	101324
Banerjee, Susanta / Nayak, Sanket / Das, Sreekanta	Shear and flexural behaviour of unreinforced masonry wallets with steel wire mesh	101254
Martins, Nuno R. / Carrilho da Graça, Guilherme	A simulation study of decreased life expectancy from exposure to ambient particulate air pollution (PM2.5) in naturally ventilated workspaces	101268
Tie, Tzer Sheng / Mo, Kim Hung / Putra, Azma / Loo, Siaw Chuing / Alengaram, U. Johnson / Ling, Tung-Chai	Sound absorption performance of modified concrete: A review	101219
Bitar, Reem / Saad, George / Awwad, Elie / El Khatib, Helmi / Mabsout, Mounir	Strengthening unreinforced masonry walls using natural hemp fibers	101253
Zeng, Jun-Jie / Ye, Yu-Yi / Gao, Wan-Yang / Smith, Scott T. / Guo, Yong-Chang	Stress-strain behavior of polyethylene terephthalate fiber-reinforced polymer-confined normal-, high- and ultra high-strength concrete	101243
Hossain, K. M. A. / Hossain, M. A. / Manzur, T.	Structural performance of fiber reinforced lightweight self-compacting concrete beams subjected to accelerated corrosion	101291
Kaur, Ramanjit / Kothiyal, N. C. / Arora, Himanshu	Studies on combined effect of superplasticizer modified graphene oxide and carbon nanotubes on the physico-mechanical strength and electrical resistivity of fly ash blended cement mortar	101304
Yan, Lu / Liu, Meng / Xue, Kai / Zhang, Ziwei	A study on temperature-setting behavior for room air conditioners based on big data	101197
Gharehbaghi, Vahid Reza / Nguyen, Andy / Farsangi, Ehsan Noroozinejad / Yang, T. Y.	Supervised damage and deterioration detection in building structures using an enhanced autoregressive time-series approach	101292
Tramontin Souza, Marcelo / Onghero, Lucas / Longuini Repette, Wellington / Raupp Pereira, Fabiano / Novaes de Oliveira, Antonio Pedro	Sustainable cement with Al-anodizing waste: Evaluating reactivity and feasibility as a shrinkage-compensating admixture	101233
Ozturk, Murat / Depci, Tolga / Karaaslan, Muharrem / Sevim, Umur Korkut / Akgol, Oguzhan / Ozdemir Hacioglu, Serıfe	Synergetic effect of waste tire rubber and mil scale on electromagnetic wave attenuation properties of new generation mortar	101249
Murali, G. / Fediuk, Roman	A Taguchi approach for study on impact response of ultra-high-performance polypropylene fibrous cementitious composite	101301
Cai, Jingming / Li, Xiaopeng / Tan, Jiawei / Vandevyvere, Brecht	Thermal and compressive behaviors of fly ash and metakaolin-based geopolymer	101307
Limami, Houssame / Manssouri, Imad / Cherkaoui, Khalid / Saadaoui, Malak / Khaldoun, Asmae	Thermal performance of unfired lightweight clay bricks with HDPE & PET waste plastics additives	101251
Shanmugavel, Durgadevagi / Dubey, Rachna / Ramadoss, Ravi	Use of natural polymer from plant as admixture in hydraulic lime mortar masonry	101252
Faraj, Rabar H. / Hama Ali, Hunar F. / Sherwani, Aryan Far H. / Hassan, Bedar R. / Karim, Hogr	Use of recycled plastic in self-compacting concrete: A comprehensive review on fresh and mechanical properties	101283
Zhan, Pei-min / He, Zhi-hai / Ma, Zhi-ming / Liang, Chao-feng / Zhang, Xiao-xiang / Abreham, Annulo Addisayehu / Shi, Jin-yan	Utilization of nano-metakaolin in concrete: A review	101259
Alyousef, Rayed / Alabduljabbar, Hisham / Mohammadhosseini, Hossein / Mohamed, Abdeliazim Mustafa / Siddika, Ayesha / Alrshoudi, Fahed / Alaskar, Abdulaziz	Utilization of sheep wool as potential fibrous materials in the production of concrete composites	101216
Zou, Chao / Wang, Yimin / Zhang, Xu / Tao, Ziyu	Vibration isolation of over-track buildings in a metro depot by using trackside wave barriers	101270

About this
data sheet
IssueID
36330
Published on:
25/02/2020
Last updated on:
09/05/2022

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Journal of Building Engineering - July 2020

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Journal of Building Engineering - July 2020

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.