Journal of Building Engineering - juillet 2020

Publié:	juillet 2020

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Lee, Swoo-Heon / Abolmaali, Ali / Shin, Kyung-Jae / Lee, Hee-Du	ABAQUS modeling for post-tensioned reinforced concrete beams	101273
Statkic, Sasa / Jovanovic, Bojan / Micic, Aleksandar / Arsic, Nebojsa / Jović, Srđan	Adaptive neuro fuzzy selection of the most important factors for photovoltaic pumping system performance prediction	101242
Tena-Colunga, Arturo / Liga-Paredes, Angel Eduardo	Approximation of lateral stiffness for walls with two bands of openings considering slab stiffness effects	101310
Afroz, Sumaiya / Manzur, Tanvir / Hossain, Khandaker M. Anwar	Arrowroot as bio-admixture for performance enhancement of concrete	101313
Saleem, Muhammad	Assessing the load carrying capacity of concrete anchor bolts using non-destructive tests and artificial multilayer neural network	101260
Chu, Wen-Xiao / Wang, Rui / Hsu, Po-Hao / Wang, Chi-Chuan	Assessment on rack intake flowrate uniformity of data center with cold aisle containment configuration	101331
Chrysanidis, Theodoros / Tegos, Ioannis A.	Axial and transverse strengthening of R/C circular columns: Conventional and new type of steel and hybrid jackets using high-strength mortar	101236
Wang, Wanqian / Wang, Jingfeng / Zhao, Peng / Ja, Lili / Pan, Guangdong	Axial compressive experiments and structural behaviour estimation of CFS composite walls sprayed with LPM	101305
Cai, Jingming / Pan, Jinlong / Tan, Jiawei / Vandevyvere, Brecht / Li, Xiaopeng	Behavior of ECC-encased CFST columns under eccentric loading	101188
Li, Shengcai / Zhou, Zhongchen / Luo, Hongzhen / Milani, Gabriele / Abruzzese, Donato	Behavior of traditional Chinese mortise-tenon joints: Experimental and numerical insight for coupled vertical and reversed cyclic horizontal loads	101257
Saranya, P. / Nagarajan, Praveen / Shashikala, A. P.	Behaviour of GGBS-dolomite geopolymer concrete short column under axial loading	101232
Cunha, Filipe O. / Oliveira, Armando C.	Benchmarking for realistic nZEB hotel buildings	101298
Habib, Muhammad Farhan / Ali, Muzaffar / Sheikh, Nadeem Ahmed / Badar, Abdul Waheed / Mehmood, Sajid	Building thermal load management through integration of solar assisted absorption and desiccant air conditioning systems: A model-based simulation-optimization approach	101279
Ruiz, L. G. B. / Pegalajar, M. C. / Molina-Solana, M. / Guo, Yi-Ke	A case study on understanding energy consumption through prediction and visualization (VIMOEN)	101315
Tao, Yiqi / Gou, Zhonghua / Yu, Zhongqi / Fu, Jiayan / Chen, Xiaowei	The challenge of creating age-friendly indoor environments in a high-density city: Case study of Hong Kong’s care and attention homes	101280
Pedroso, Marco / Flores-Colen, Inês / Silvestre, José Dinis / Gomes, M. Glória / Silva, Luis / Sequeira, Pedro / de Brito, Jorge	Characterisation of a multilayer external wall thermal insulation system. Application in a Mediterranean climate	101265
Careddu, Nicola	Chromaticism differentiations: A study of the diversified aesthetic appeal of the Ghiandone granite range	101300
Doğramacı, Pervin Abohorlu / Aydın, Devrim	Comparative experimental investigation of novel organic materials for direct evaporative cooling applications in hot-dry climate	101240
Li, Zhengrong / Zhang, Dongkai / Chen, Xiangyun / Li, Cui	A comparative study on energy saving and economic efficiency of different cooling terminals based on exergy analysis	101224
Asfour, Omar S.	A comparison between the daylighting and energy performance of courtyard and atrium buildings considering the hot climate of Saudi Arabia	101299
Bilgin, Huseyin / Hysenlliu, Marjo	Comparison of near and far-fault ground motion effects on low and mid-rise masonry buildings	101248
Zheng, Tengteng / Yan, Hongzhen / Li, Shuai / Cheng, Yanpeng / Zou, Liuxiao / Hu, Yingcheng	Compressive behavior and failure modes of the wood-based double X-type lattice sandwich structure	101176
Khan, Mehran / Cao, Mingli / Ali, Majid	Cracking behaviour and constitutive modelling of hybrid fibre reinforced concrete	101272
Mohammadhosseini, Hossein / Alyousef, Rayed / Lim, Nor Hasanah Abdul Shukor / Tahir, Mahmood Md / Alabduljabbar, Hisham / Mohamed, Abdeliazim Mustafa	Creep and drying shrinkage performance of concrete composite comprising waste polypropylene carpet fibres and palm oil fuel ash	101250
Díaz, C. / Cornadó, C. / Albareda, A.	Damage in face-brick facades placed between concrete slabs	101312
Gavali, Hindavi R. / Ralegaonkar, Rahul V.	Design development of sustainable alkali-activated bricks	101302
Moghtadernejad, Saviz / Chouinard, Luc E. / Mirza, M. Saeed	Design strategies using multi-criteria decision-making tools to enhance the performance of building façades	101274
Barg, Steve / Flager, Forest / Fischer, Martin	A design-focused, cost-ranked, structural-frame sizing optimization	101269
Cui, Zhaoyan / Xu, Ming / Tu, Liuhui / Chen, Zhongfan / Hui, Botao	Determination of dowel-bearing strength of laminated bamboo at elevated temperatures	101258
Atmaca, A. B. / Gedik, G. Zorer	Determination of thermal comfort of religious buildings by measurement and survey methods: Examples of mosques in a temperate-humid climate	101246
Rumman, R. / Bari, M. S. / Manzur, T. / Kamal, M. R. / Noor, M. A.	A Durable Concrete Mix Design Approach using Combined Aggregate Gradation Bands and Rice Husk Ash Based Blended Cement	101303
Nik-Bakht, Mazdak / Orenga Panizza, Rafaela / Hudon, Philippe / Chassain, Pierre-Yves / Bashari, Masoud	Economy-energy trade off automation – A decision support system for building design development	101222
Truong, Tam T. / Dinh-Cong, D. / Lee, Jaehong / Nguyen-Thoi, T.	An effective deep feedforward neural networks (DFNN) method for damage identification of truss structures using noisy incomplete modal data	101244
Alkhalidi, Ammar / Hatuqay, Dina	Energy efficient 3D printed buildings: Material and techniques selection worldwide study	101286
Lu, Daniel B. / Warsinger, David M.	Energy savings of retrofitting residential buildings with variable air volume systems across different climates	101223
Tahsildoost, Mohammad / Zomorodian, ZahraSadat	Energy, carbon, and cost analysis of rural housing retrofit in different climates	101277
Yakhchalian, Masood / Asgarkhani, Neda / Yakhchalian, Mansoor	Evaluation of deflection amplification factor for steel buckling restrained braced frames	101228
Parameshwaran, R. / Kumar, G. Naveen / Ram, V. Vinayaka	Experimental analysis of hybrid nanocomposite-phase change material embedded cement mortar for thermal energy storage	101297
Marchione, Francesco / Munafò, Placido	Experimental strength evaluation of glass/aluminum double-lap adhesive joints	101284
Arevalo, Sergio / Tomlinson, Douglas	Experimental thermal bowing response of precast concrete insulated wall panels with stiff shear connectors and simple supports	101319
Lee, Joohyun / McCuskey Shepley, Mardelle / Choi, Jungmann	Exploring the localization process of low energy residential buildings: A case study of Korean passive houses	101290
Gharsellaoui, Sondes / Mansouri, Majdi / Trabelsi, Mohamed / Refaat, Shady S. / Messaoud, Hassani	Fault diagnosis of heating systems using multivariate feature extraction based machine learning classifiers	101221
Shahbazpanahi, Shahriar / Faraj, Rabar H.	Feasibility study on the use of shell sunflower ash and shell pumpkin ash as supplementary cementitious materials in concrete	101271
Nicolao, E. S. / Leiva, P. / Chalapud, M. C. / Ruseckaite, R. A. / Ciannamea, E. M. / Stefani, P. M.	Flexural and tensile properties of biobased rice husk-jute-soybean protein particleboards	101261
Zeng, Jun-Jie / Zhang, Xi-Wen / Chen, Guang-Ming / Wang, Xiao-Meng / Jiang, Tao	FRP-confined recycled glass aggregate concrete: Concept and axial compressive behavior	101288
Hamsavathi, K. / Prakash, K. Soorya / Kavimani, V.	Green high strength concrete containing recycled Cathode Ray Tube Panel Plastics (E-waste) as coarse aggregate in concrete beams for structural applications	101192
Balali, Amirhossein / Hakimelahi, Ali / Valipour, Alireza	Identification and prioritization of passive energy consumption optimization measures in the building industry: An Iranian case study	101239
Merzoug, Wissam / Chergui, Samia / Zouaoui, Mustapha Cheikh	The impact of reinforced concrete on the modern-day architectural heritage of Algeria	101210
Pérez-Bella, J. M. / Domínguez-Hernández, J. / Cano-Suñén, E. / Alonso-Martínez, M. / Del Coz-Díaz, J. J.	Improvement of a functional method to determine the design thermal transmittance of building façades. Implementation in southern Spain	101231
Dinis, Fábio Matoseiro / Sanhudo, Luís / Poças Martins, João / Ramos, Nuno M. M.	Improving project communication in the architecture, engineering and construction industry: Coupling virtual reality and laser scanning	101287
Lin, Run-Sheng / Park, Ki-Bong / Wang, Xiao-Yong / Zhang, Gui-yu	Increasing the early strength of high-volume Hwangtoh–cement systems using bassanite	101317
Serrano-Jiménez, Antonio / Lizana, Jesús / Molina-Huelva, Marta / Barrios-Padura, Ángela	Indoor environmental quality in social housing with elderly occupants in Spain: Measurement results and retrofit opportunities	101264
Rasouli, Alireza / Toopchi-Nezhad, Hamid	The influence of confined water on blast response of reinforced concrete slabs: Experimental investigation	101285
Chen, Pang / Zhou, Xianyu / Zheng, Wenzhong / Wang, Ying / Bao, Bisheng	Influence of high sustained loads and longitudinal reinforcement on long-term deformation of reinforced concrete beams	101241
Eltayeb, Essam / Ma, Xing / Zhuge, Yan / Youssf, Osama / Mills, Julie E.	Influence of rubber particles on the properties of foam concrete	101217
Pan, Mi / Linner, Thomas / Pan, Wei / Cheng, Hui-min / Bock, Thomas	Influencing factors of the future utilisation of construction robots for buildings: A Hong Kong perspective	101220
Kooshafar, Mohammad / Madani, Hesam	An investigation on the influence of nano silica morphology on the characteristics of cement composites	101293
Murad, Yasmin	Joint shear strength models for exterior RC beam-column connections exposed to biaxial and uniaxial cyclic loading	101225
Weerasinghe, Pasindu / Nguyen, Kate / Mendis, Priyan / Guerrieri, Maurice	Large-scale experiment on the behaviour of concrete flat slabs subjected to standard fire	101255
Grazieschi, Gianluca / Gori, Paola / Lombardi, Lidia / Asdrubali, Francesco	Life cycle energy minimization of autonomous buildings	101229
Croom, Brendan / Rajan, Sreehari / Matta, Fabio / Aleshin, Artem / Myers, Troy / Sutton, Michael A.	Modeling of asphalt roof shingle structures with dual sealant strips; optimization for improved delamination resistance under high wind loads	101266
Srivanit, Manat / Jareemit, Daranee	Modeling the influences of layouts of residential townhouses and tree-planting patterns on outdoor thermal comfort in Bangkok suburb	101262
Schwantes-Cezario, Nicole / Ferreira Nogueira Camargo, Geovana Souza / Franco do Couto, Álisson / Porto, Maria Fernanda / Cremasco, Lucca Vieira / Andrello, Avacir Casanova / Toralles, Berenice Martins	Mortars with the addition of bacterial spores: Evaluation of porosity using different test methods	101235
Bengar, Habib Akbarzadeh / Shahmansouri, Amir Ali	A new anchorage system for CFRP strips in externally strengthened RC continuous beams	101230
Wagiman, Khairul Rijal / Abdullah, Mohd Noor / Hassan, Mohammad Yusri / Radzi, Nur Hanis Mohammad	A new optimal light sensor placement method of an indoor lighting control system for improving energy performance and visual comfort	101295
Obaidat, Yasmeen Taleb / Ashteyat, Ahmed M. / Obaidat, Ala' Taleb / Alfaris, Suhaib F.	A new technique for repairing reinforced concrete columns	101256
Li, Yao / Yin, Shiping / Dai, Junyan / Liu, Ming	Numerical investigation on the influences of different factors on the seismic performance of TRC-strengthened RC columns	101245
Chen, Dengyi / Hu, Xiaochun / Meng, Dan / Leto, Sebastian	Optimal consumption modeling of multi–chiller system using a robust optimization algorithm with considering the measurement, control and threshold uncertainties	101263
Ahmadi, Somayeh / Fakehi, Amir Hossien / Vakili, Ali / Moeini-Aghtaie, Moein	An optimization model for the long-term energy planning based on useful energy, economic and environmental pollution reduction in residential sector: A case of Iran	101247
Lu, Jiang / Xue, Yucong / Wang, Zhi / Fan, Yifan	Optimized mitigation of heat loss by avoiding wall-to-floor thermal bridges in reinforced concrete buildings	101214
Huseien, Ghasan Fahim / Shah, Kwok Wei	Performance evaluation of alkali-activated mortars containing industrial wastes as surface repair materials	101234
Xu, Jinjun / Wang, Yumei / Ren, Rui / Wu, Zhanjing / Ozbakkaloglu, Togay	Performance evaluation of recycled aggregate concrete-filled steel tubes under different loading conditions: Database analysis and modelling	101308
Amrani, Mustapha / Taha, Yassine / Kchikach, Azzouz / Benzaazoua, Mostafa / Hakkou, Rachid	Phosphogypsum recycling: New horizons for a more sustainable road material application	101267
Momoh, Emmanuel Owoichoechi / Osofero, Adelaja Israel / Martinez-felipe, Alfonso / Hamzah, Fazlena	Physico-mechanical behaviour of Oil Palm Broom Fibres (OPBF) as eco-friendly building material	101208
Khalaf, Mohammed A. / Ban, Cheah Chee / Ramli, Mahyuddin / Ahmed, Naser M. / Sern, Lim Jay / Khaleel, Hawraa Ali	Physicomechanical and gamma-ray shielding properties of high-strength heavyweight concrete containing steel furnace slag aggregate	101306
Yasmeen, Sadia / Liu, Hong / Wu, Yuxin / Li, Baizhan	Physiological responses of acclimatized construction workers during different work patterns in a hot and humid subtropical area of China	101281
Zhang, Junfei / Li, Dong / Wang, Yuhang	Predicting uniaxial compressive strength of oil palm shell concrete using a hybrid artificial intelligence model	101282
Lizarazo-Marriaga, Juan / Higuera, Camilo / Guzmán, Isaías / Fonseca, Leonardo	Probabilistic modeling to predict fly-ash concrete corrosion initiation	101296
Shubbar, Ali Abdulhussein / Jafer, Hassnen / Abdulredha, Muhammad / Al-Khafaji, Zainab S. / Nasr, Mohammed Salah / Al Masoodi, Zainab / Sadique, Monower	Properties of cement mortar incorporated high volume fraction of GGBFS and CKD from 1 day to 550 days	101327
Kalhor, Koosha / Ememinejad, Newsha	Qualitative and quantitative optimization of thermal insulation materials: Insights from the market and energy codes	101275
Hong, Chaokun / Li, Haitao / Xiong, Zhenhua / Lorenzo, Rodolfo / Corbi, Ileana / Corbi, Ottavia / Wei, Dongdong / Yuan, Conggan / Yang, Dong / Zhang, Huizhong	Review of connections for engineered bamboo structures	101324
Banerjee, Susanta / Nayak, Sanket / Das, Sreekanta	Shear and flexural behaviour of unreinforced masonry wallets with steel wire mesh	101254
Martins, Nuno R. / Carrilho da Graça, Guilherme	A simulation study of decreased life expectancy from exposure to ambient particulate air pollution (PM2.5) in naturally ventilated workspaces	101268
Tie, Tzer Sheng / Mo, Kim Hung / Putra, Azma / Loo, Siaw Chuing / Alengaram, U. Johnson / Ling, Tung-Chai	Sound absorption performance of modified concrete: A review	101219
Bitar, Reem / Saad, George / Awwad, Elie / El Khatib, Helmi / Mabsout, Mounir	Strengthening unreinforced masonry walls using natural hemp fibers	101253
Zeng, Jun-Jie / Ye, Yu-Yi / Gao, Wan-Yang / Smith, Scott T. / Guo, Yong-Chang	Stress-strain behavior of polyethylene terephthalate fiber-reinforced polymer-confined normal-, high- and ultra high-strength concrete	101243
Hossain, K. M. A. / Hossain, M. A. / Manzur, T.	Structural performance of fiber reinforced lightweight self-compacting concrete beams subjected to accelerated corrosion	101291
Kaur, Ramanjit / Kothiyal, N. C. / Arora, Himanshu	Studies on combined effect of superplasticizer modified graphene oxide and carbon nanotubes on the physico-mechanical strength and electrical resistivity of fly ash blended cement mortar	101304
Yan, Lu / Liu, Meng / Xue, Kai / Zhang, Ziwei	A study on temperature-setting behavior for room air conditioners based on big data	101197
Gharehbaghi, Vahid Reza / Nguyen, Andy / Farsangi, Ehsan Noroozinejad / Yang, T. Y.	Supervised damage and deterioration detection in building structures using an enhanced autoregressive time-series approach	101292
Tramontin Souza, Marcelo / Onghero, Lucas / Longuini Repette, Wellington / Raupp Pereira, Fabiano / Novaes de Oliveira, Antonio Pedro	Sustainable cement with Al-anodizing waste: Evaluating reactivity and feasibility as a shrinkage-compensating admixture	101233
Ozturk, Murat / Depci, Tolga / Karaaslan, Muharrem / Sevim, Umur Korkut / Akgol, Oguzhan / Ozdemir Hacioglu, Serıfe	Synergetic effect of waste tire rubber and mil scale on electromagnetic wave attenuation properties of new generation mortar	101249
Murali, G. / Fediuk, Roman	A Taguchi approach for study on impact response of ultra-high-performance polypropylene fibrous cementitious composite	101301
Cai, Jingming / Li, Xiaopeng / Tan, Jiawei / Vandevyvere, Brecht	Thermal and compressive behaviors of fly ash and metakaolin-based geopolymer	101307
Limami, Houssame / Manssouri, Imad / Cherkaoui, Khalid / Saadaoui, Malak / Khaldoun, Asmae	Thermal performance of unfired lightweight clay bricks with HDPE & PET waste plastics additives	101251
Shanmugavel, Durgadevagi / Dubey, Rachna / Ramadoss, Ravi	Use of natural polymer from plant as admixture in hydraulic lime mortar masonry	101252
Faraj, Rabar H. / Hama Ali, Hunar F. / Sherwani, Aryan Far H. / Hassan, Bedar R. / Karim, Hogr	Use of recycled plastic in self-compacting concrete: A comprehensive review on fresh and mechanical properties	101283
Zhan, Pei-min / He, Zhi-hai / Ma, Zhi-ming / Liang, Chao-feng / Zhang, Xiao-xiang / Abreham, Annulo Addisayehu / Shi, Jin-yan	Utilization of nano-metakaolin in concrete: A review	101259
Alyousef, Rayed / Alabduljabbar, Hisham / Mohammadhosseini, Hossein / Mohamed, Abdeliazim Mustafa / Siddika, Ayesha / Alrshoudi, Fahed / Alaskar, Abdulaziz	Utilization of sheep wool as potential fibrous materials in the production of concrete composites	101216
Zou, Chao / Wang, Yimin / Zhang, Xu / Tao, Ziyu	Vibration isolation of over-track buildings in a metro depot by using trackside wave barriers	101270

Informations
sur cette fiche
IssueID
36330
Publié(e) le:
25.02.2020
Modifié(e) le:
09.05.2022

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Journal of Building Engineering - juillet 2020

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Journal of Building Engineering - juillet 2020

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.