Journal of Building Engineering - May 2020

Published:	May 2020

Articles in this Issue

Author(s)	Title	Page(s)
Poiani, Marina / Gazzani, Valentina / Clementi, Francesco / Lenci, Stefano	Aftershock fragility assessment of Italian cast–in–place RC industrial structures with precast vaults	101206
Keleştemur, Oğuzhan / Arıcı, Erdinç	Analysis of some engineering properties of mortars containing steel scale using Taguchi based grey method	101015
Matias, Gina / Torres, Isabel / Rei, Filipe / Gomes, Filipe	Analysis of the functional performance of different mortars with incorporated residues	101150
Maghfouri, Mehdi / Shafigh, Payam / Alimohammadi, Vahid / Doroudi, Yashar / Aslam, Muhammad	Appropriate drying shrinkage prediction models for lightweight concrete containing coarse agro-waste aggregate	101148
Zhong, Xuyang / Wu, Wei / Ridley, Ian A.	Assessing the energy and indoor-PM2.5-exposure impacts of control strategies for residential energy recovery ventilators	101137
Sandoval, Gersson F. B. / Galobardes, Isaac / Campos, André / Toralles, Berenice M.	Assessing the phenomenon of clogging of pervious concrete (Pc): Experimental test and model proposition	101203
Hassan, Wael M. / Reyes, Juan C.	Assessment of modal pushover analysis for mid-rise concrete buildings with and without viscous dampers	101103
Orlando, Maurizio / Betti, Michele / Spinelli, Paolo	Assessment of structural behaviour and seismic retrofitting for an Italian monumental masonry building	101115
Aghamolaei, Reihaneh / Ghaani, Mohammad Reza	Balancing the impacts of energy efficiency strategies on comfort quality of interior places: Application of optimization algorithms in domestic housing	101174
Mui, K. W. / Tsang, T. W. / Wong, L. T.	Bayesian updates for indoor thermal comfort models	101117
Özbek, Eray / Aykac, Bengi / Bocek, Meryem / Yılmaz, Mahmut Cem / Mohammed, A. B. Khadeeja / Er, Şule Bakırcı / Aykac, Sabahattin	Behavior and strength of hidden Rc beams embedded in slabs	101130
Haddad, Rami H. / Al-Sayed, Ahmad	Bond behavior between ASR-damaged concrete and CFRP sheets: Empirical modeling	101166
Rocha, Ana / Pinto, Débora / Ramos, Nuno M. M. / Almeida, Ricardo M. S. F. / Barreira, Eva / Simões, M. Lurdes / Poças Martins, João / Pereira, Pedro F. / Sanhudo, Luís	A case study to improve the winter thermal comfort of an existing bus station	101123
Costa, Gonçal / Sicilia, Álvaro / Oregi, Xabat / Pedrero, Juan / Mabe, Lara	A catalogue of energy conservation measures (ECM) and a tool for their application in energy simulation models	101102
Kurda, Rawaz / de Brito, Jorge / Silvestre, José D.	A comparative study of the mechanical and life cycle assessment of high-content fly ash and recycled aggregates concrete	101173
Simalti, Ashish / Singh, A. P.	Comparative study on direct shear behavior of manufactured and recycled shredded tyre steel fiber reinforced self-consolidating concrete	101169
Shin, Dong-Hyeon / Kim, Hyung-Joon	Composite effects of shear connectors used for lightweight-foamed-concrete sandwich wall panels	101108
Bui, Linh Van Hong / Stitmannaithum, Boonchai / Jongvivatsakul, Pitcha	Comprehensive investigation on bond mechanism of embedded through-section fiber-reinforced polymer bars to concrete for structural analysis	101180
Halder, Lipika / Dutta, Sekhar Chandra / Sharma, Richi Prasad	Damage study and seismic vulnerability assessment of existing masonry buildings in Northeast India	101190
Abediniangerabi, B. / Shahandashti, S. M. / Makhmalbaf, A.	A data-driven framework for energy-conscious design of building facade systems	101172
Seyedolhosseini, Atefesadat / Masoumi, Nasser / Modarressi, Mehdi / Karimian, Noushin	Daylight adaptive smart indoor lighting control method using artificial neural networks	101141
Arezoumandi, Mahdi / Looney, Krista B. / Volz, Jeffery S.	Development length of prestressing strand in self-consolidating concrete vs. conventional concrete: Experimental study	101218
Ma, Kuen Wai / Mak, Cheuk Ming / Wong, Hai Ming	Development of a subjective scale for sound quality assessments in building acoustics	101177
Lorenzo, Rodolfo / Mimendi, Leonel	Digitisation of bamboo culms for structural applications	101193
Wang, Zhe / Wang, Jingyi / He, Yueer / Liu, Yanchen / Lin, Borong / Hong, Tianzhen	Dimension analysis of subjective thermal comfort metrics based on ASHRAE Global Thermal Comfort Database using machine learning	101120
Mostofinejad, Davood / Hosseini, Seyed Mohammad / Nosouhian, Farzaneh / Ozbakkaloglu, Togay / Nader Tehrani, Bahareh	Durability of concrete containing recycled concrete coarse and fine aggregates and milled waste glass in magnesium sulfate environment	101182
Nobre, José / Bravo, Miguel / de Brito, Jorge / Duarte, Gonçalo	Durability performance of dry-mix shotcrete produced with coarse recycled concrete aggregates	101135
Bankir, Muzeyyen Balcikanli / Ozturk, Murat / Sevim, Umur Korkut / Depci, Tolga	Effect of n-CaCO3 on fresh, hardened properties and acid resistance of granulated blast furnace slag added mortar	101209
Casagrande, Cézar Augusto / Jochem, Lidiane Fernanda / Onghero, Lucas / de Matos, Paulo Ricardo / Longuini Repette, Wellington / Gleize, Philippe Jean Paul	Effect of partial substitution of superplasticizer by silanes in Portland cement pastes	101226
Pachideh, Ghasem / Gholhaki, Majid / Ketabdari, Hesam	Effect of pozzolanic wastes on mechanical properties, durability and microstructure of the cementitious mortars	101178
Chen, Felix / Richman, Russell	The effect of shallow depth horizontal ground loop clearance on the heat loss of a single family residential dwelling	101185
Bostanci, Levent	Effect of waste glass powder addition on properties of alkali-activated silica fume mortars	101154
Keshavarz, Zahra / Mostofinejad, Davood	Effects of high-temperature exposure on concrete containing waste porcelain coarse aggregates and steel chips	101211
Karim, Md Rezaul / Hossain, Md Maruf / Manjur A Elahi, Md / Zain, Muhammad Fauzi Mohd	Effects of source materials, fineness and curing methods on the strength development of alkali-activated binder	101147
Parhizkar, Tarannom / Aramoun, Fereshteh / Saboohi, Yadollah	Efficient health monitoring of buildings using failure modes and effects analysis case study: Air handling unit system	101113
Chen, Yameng / Wang, Chen / Yap, Jeffrey Boon Hui / Li, Heng / Zhang, Songjiang	Emergency evacuation simulation at starting connection of cross-sea bridge: Case study on Haicang Avenue Subway Station in Xiamen Rail Transit Line	101163
Ji, Ru / Guo, Shan / Wei, Shen	Evaluation of anchor bolt effects on the thermal performance of building insulation materials	101200
Pons, Oriol / Abt, Tobias	Evaluation of household waste materials for façade components in primary educational workshops. Mechanical and fire properties	101202
Chen, Guo / Wu, Jing / Jiang, Hao / Zhou, Tong / Li, Xiang / Yu, Yunfei	Evaluation of OSB webbed laminated bamboo lumber box-shaped joists with a circular web hole	101129
Nada, S. A. / Alshaer, W. G. / Saleh, R. M.	Experimental investigation of PCM transient performance in free cooling of the fresh air of air conditioning systems	101153
Bedon, Chiara	Experimental investigation on vibration sensitivity of an indoor glass footbridge to walking conditions	101195
Khan, Qasim S. / Sheikh, M. Neaz / Hadi, Muhammad N. S.	Experimental results of circular FRP tube confined concrete (CFFT) and comparison with analytical models	101157
Lin, Tee / Zargar, Omid Ali / Lin, Kuan-Yu / Juiña, Oscar / Sabusap, Dexter Lyndon / Hu, Shih-Cheng / Leggett, Graham	An experimental study of the flow characteristics and velocity fields in an operating room with laminar airflow ventilation	101184
Al-Fakih, Amin / Wahab, M. M. A. / Mohammed, Bashar S. / Liew, M. S. / Zawawi, Noor Amila Wan Abdullah / As'ad, Sholihin	Experimental study on axial compressive behavior of rubberized interlocking masonry walls	101107
Chorlton, Bronwyn / Gales, John	Fire performance of heritage and contemporary timber encapsulation materials	101181
Cabrera, Virginia / López-Vizcaíno, Rubén / Yustres, Ángel / Ruiz, Miguel Ángel / Torrero, Enrique / Navarro, Vicente	A functional structure for state functions of moisture transfer in heritage building elements	101201
Shahnewaz, Md / Shahria Alam, M.	Genetic algorithm for predicting shear strength of steel fiber reinforced concrete beam with parameter identification and sensitivity analysis	101205
Bakhteari, Sadegh / Attarian, Koorosh	Geometry-based modeling for characterizing design and construction of Ourchin domes	101199
Runge, Jason / Zmeureanu, Radu / Le Cam, Mathieu	' Hybrid short-term forecasting of the electric demand of supply fans using machine learning	101144
Colinart, T. / Vinceslas, T. / Lenormand, H. / Hellouin de Ménibus, A. / Hamard, E. / Lecompte, T.	Hygrothermal properties of light-earth building materials	101134
Won, Deokhee / Lee, Jeong-Hwa / Seo, Jihye / Kang, Young Jong / Kim, Seungjun	Hysteretic performance of column-footing joints with steel composite hollow RC columns under cyclic load	101165
Kenai, Mohamed-Amine / Libessart, Laurent / Lassue, Stéphane / Defer, Didier	Impact of plants obscuration on energy balance: Theoretical and numerical study	101112
Xue, Yucong / Zhao, Kang / Qian, Yidong / Ge, Jian	Improved operating strategy for air-conditioning systems based on the indoor occupancy rate	101196
Lavie Arsène, Mango-Itulamya / Frédéric, Collin / Nathalie, Fagel	Improvement of lifetime of compressed earth blocks by adding limestone, sandstone and porphyry aggregates	101155
Pedreño-Rojas, M. A. / de Brito, J. / Flores-Colen, I. / Pereira, M. F. C. / Rubio-de-Hita, P.	Influence of gypsum wastes on the workability of plasters: Heating process and microstructural analysis	101143
Pandey, Arunabh / Kumar, Brind	Investigation on the effects of acidic environment and accelerated carbonation on concrete admixed with rice straw ash and microsilica	101125
Kwong, Qi Jie	Light level, visual comfort and lighting energy savings potential in a green-certified high-rise building	101198
Chegari, Badr / Tabaa, Mohamed / Moutaouakkil, Fouad / Simeu, Emmanuel / Medromi, Hicham	Local energy self-sufficiency for passive buildings: Case study of a typical Moroccan building	101164
Annan, Charles-Darwin / Beaumont, Eric	Low-cycle fatigue of stainless steel plates under large plastic strain demands	101160
Garikapati, Krishna Priyanka / Sadeghian, Pedram	Mechanical behavior of flax-lime concrete blocks made of waste flax shives and lime binder reinforced with jute fabric	101187
Bazzocchi, Frida / Bertagni, Stefano / Ciacci, Cecilia / Colonna, Emiliano / Di Naso, Vincenzo	Mechanical characterisation of a low-thickness ceramic tile cladding subject to ageing phenomena	101105
Abdollahzadeh, Nastaran / Tahsildoost, Mohammad / Zomorodian, Zahra Sadat	A method of partition design for open-plan offices based on daylight performance evaluation	101171
Abdul-Rahman, Mazin / Al-Attar, Alyaa A. / Hamada, Hussein M. / Tayeh, Bassam	Microstructure and structural analysis of polypropylene fibre reinforced reactive powder concrete beams exposed to elevated temperature	101167
Tao, Qiuhua / Jiang, Fujian / Li, Zhengrong / Zheng, Jianwen	A model of heat gain calculation for buildings with shuttle louvers: Verification and a case study	101101
Ahamed, Md Shamim / Guo, Huiqing / Tanino, Karen	Modeling heating demands in a Chinese-style solar greenhouse using the transient building energy simulation model TRNSYS	101114
Bonato, P. / D'Antoni, M. / Fedrizzi, R.	Modelling and simulation-based analysis of a façade-integrated decentralized ventilation unit	101183
Rahardjo, Hary Agus / Prihanton, Morry	The most critical issues and challenges of fire safety for building sustainability in Jakarta	101133
Weng, Yun-Hao / Qian, Kai / Fu, Feng / Fang, Qin	Numerical investigation on load redistribution capacity of flat slab substructures to resist progressive collapse	101109
Pourmoosavi, G. H. / Mousavi Ghasemi, S. A. / Farahmand Azar, B. / Talatahari, S.	Numerical investigation on ultimate shear strength of long steel plate girder web panels at high temperatures	101070
Ganesh, Ghogare Abhijeet / Sinha, Shobha Lata / Verma, Tikendra Nath	Numerical simulation for optimization of the indoor environment of an occupied office building using double-panel and ventilation radiator	101139
Aznavi, Sima / Fajri, Poria / Sabzehgar, Reza / Asrari, Arash	Optimal management of residential energy storage systems in presence of intermittencies	101149
Almeida, J. / Ribeiro, A. B. / Santos Silva, A. / Faria, P.	Overview of mining residues incorporation in construction materials and barriers for full-scale application	101215
Razkenari, Mohamad / Fenner, Andriel / Shojaei, Alireza / Hakim, Hamed / Kibert, Charles	Perceptions of offsite construction in the United States: An investigation of current practices	101138
Barsim, Mohsen M. / Bassily, Magdy A. / El-Batsh, Hesham M. / Rihan, Yaser A. / Sherif, Magda M.	Performance of impulse ventilation system in an underground car park fire: Case study	101162
Rivera-Gómez, Carlos / Pérez-Fenoy, José / Entrenas-Angulo, José A. / López-Aguilar, Martín / Galán-Marín, Carmen	Performance validation and manufacture feasibility for an advanced constructive system considering facilities integration	101127
McNeil, Andrew	A photographic method for mapping angular locations of exterior solar obstructions	101170
Flores-Alés, Vicente / Alducin-Ochoa, Juan Manuel / Martin-del-Rio, Juan Jesús / Torres-González, Marta / Jiménez-Bayarri, Victor	Physical-mechanical behaviour and transformations at high temperature in a cement mortar with waste glass as aggregate	101158
Azevedo, A. R. G. / Vieira, C. M. F. / Ferreira, W. M. / Faria, K. C. P. / Pedroti, L. G. / Mendes, B. C.	Potential use of ceramic waste as precursor in the geopolymerization reaction for the production of ceramic roof tiles	101156
Simanic, Branko / Nordquist, Birgitta / Bagge, Hans / Johansson, Dennis	Predicted and measured user-related energy usage in newly built low-energy schools in Sweden	101142
Olukan, Tuza A. / Chiou, Yu-Cheng / Chiu, Cheng Hsiang / Lai, Chia-Yun / Santos, Sergio / Chiesa, Matteo	Predicting the suitability of lateritic soil type for low cost sustainable housing with image recognition and machine learning techniques	101175
Wang, Qinghe / Yang, Jinsheng / Liang, Yongze / Zhang, Huan / Zhao, Yan / Ren, Qingxin	Prediction of time-dependent behaviour of steel–recycled aggregate concrete (RAC) composite slabs via thermo-mechanical finite element modelling	101191
Farag, Eman / Alshebani, Moftah / Elhrari, Wael / Klash, Abdalah / Shebani, Anour	Production of particleboard using olive stone waste for interior design	101119
Abd Karim, Norani / Lamaming, Junidah / Yusof, Madihan / Hashim, Rokiah / Sulaiman, Othman / Hiziroglu, Salim / Nadhari, Wan Noor Aidawati Wan / Salleh, Kushairi Mohd / Taiwo, Owolabi Folahan	Properties of native and blended oil palm starch with nano-silicon dioxide as binder for particleboard	101151
Xue, Yicong / Yang, Yong / Yu, Yunlong	Pseudostatic testing for load-carrying capacity of precast concrete-encased steel composite columns	101189
Hassani, Vahid / Khabazi, Zubin / Mehrabi, Hamid Ahmad / Gregg, Carl / O'Brien, Roger William	Rationalization algorithm for a topologically-optimized multi-branch node for manufacturing by metal printing	101146
Ascione, Fabrizio / Bianco, Nicola / Iovane, Teresa / Mauro, Gerardo Maria / Napolitano, Davide Ferdinando / Ruggiano, Antonio / Viscido, Lucio	A real industrial building: Modeling, calibration and Pareto optimization of energy retrofit	101186
Nahar, Mumtasirun / Islam, Kamrul / Billah, A. H. M. Muntasir	Seismic collapse safety assessment of concrete beam-column joints reinforced with different types of shape memory alloy rebars	101106
Rezaei, Somayeh / Akbari Hamed, Arash / Basim, Mohammad Charkhtab	Seismic performance evaluation of steel structures equipped with dissipative columns	101227
Maio, Rui / Ferreira, Tiago M. / Estêvão, João M. C. / Pantò, Bartolomeo / Caliò, Ivo / Vicente, Romeu	Seismic performance-based assessment of urban cultural heritage assets through different macroelement approaches	101083
Mohsenian, Vahid / Padashpour, Saman / Hajirasouliha, Iman	Seismic reliability analysis and estimation of multilevel response modification factor for steel diagrid structural systems	101168
Etedali, Sadegh / Hasankhoie, Kazem / Sohrabi, Mohammad Reza	Seismic responses and energy dissipation of pure-friction and resilient‐friction base-isolated structures: A parametric study	101194
Yang, Jin / Huang, Jianxiang / He, Xingyang / Su, Ying / Oh, Sang-Keun	Shrinkage properties and microstructure of high volume ultrafine phosphorous slag blended cement mortars with superabsorbent polymer	101121
Mehta, Ankur / Ashish, Deepankar Kumar	Silica fume and waste glass in cement concrete production: A review	100888
Zéhil, Gérard-Philippe / Ghnatios, Chady / Himo, Rawad	Soft computing approaches to homogenized properties of inclusion-modified concrete mixtures: Application to XLPE-modified concrete	101161
Bekhta, Pavlo / Salca, Emilia-Adela / Lunguleasa, Aurel	Some properties of plywood panels manufactured from combinations of thermally densified and non-densified veneers of different thicknesses in one structure	101116
Lin, Jia-Xiang / Song, Ying / Xie, Zhi-hong / Guo, Yong-Chang / Yuan, Bing / Zeng, Jun-Jie / Wei, Xiao	Static and dynamic mechanical behavior of engineered cementitious composites with PP and PVA fibers	101097
Thomas, L. P. / Marino, B. M. / Muñoz, N.	Steady-state and time-dependent heat fluxes through building envelope walls: A quantitative analysis to determine their relative significance all year round	101122
Ameri, Farshad / de Brito, Jorge / Madhkhan, Morteza / Taheri, Ramezan Ali	Steel fibre-reinforced high-strength concrete incorporating copper slag: Mechanical, gamma-ray shielding, impact resistance, and microstructural characteristics	101118
Shrestha, Kshitij C. / Aoki, Takayoshi / Miyamoto, Mitsuhiro / Wangmo, Phuntsho / Zhang, Jingyao / Takahashi, Noriyuki	Strengthening of rammed earth structures with simple interventions	101179
Logachev, K. I. / Ziganshin, A. M. / Averkova, O. A.	A study of separated flows at inlets of flanged slotted hoods	101159
Kamboj, Gourav / Gašparík, Miroslav / Gaff, Milan / Kačík, František / Sethy, Anil Kumar / Corleto, Roberto / Razaei, Fatemeh / Ditommaso, Gianluca / Sikora, Adam / Kaplan, Lukáš / Kubš, Jiří / Das, Sumanta / Macků, Jan	Surface quality and cutting power requirement after edge milling of thermally modified meranti (Shorea spp.) wood	101213
Nnaji, Chukwuma / Karakhan, Ali A.	Technologies for safety and health management in construction: Current use, implementation benefits and limitations, and adoption barriers	101212
Lopes dos Santos, Ana Rita / da Silva Veiga, Maria do Rosário / dos Santos Silva, António Manuel / Manuel Caliço Lopes de Brito, Jorge	Tensile bond strength of lime-based mortars: The role of the microstructure on their performance assessed by a new non-standard test method	101136
Uthaichotirat, Pattra / Sukontasukkul, Piti / Jitsangiam, Peerapong / Suksiripattanapong, Cherdsak / Sata, Vanchai / Chindaprasirt, Prinya	Thermal and sound properties of concrete mixed with high porous aggregates from manufacturing waste impregnated with phase change material	101111
Pozo-Lora, Fray / Maguire, Marc	Thermal bowing of concrete sandwich panels with flexible shear connectors	101124
Ravelo, Blaise / Rajaoarisoa, Lala / Maurice, Olivier	Thermal modelling of multilayer walls for building retrofitting applications	101126
Khemet, Bomani / Richman, Russell	Towards a methodological approach to builder specific, preconstruction airtightness estimates for light-framed, detached, low-rise residential buildings in Canada	101140
Delfani, Shahram / Karami, Maryam	Transient simulation of solar desiccant/M-Cycle cooling systems in three different climatic conditions	101152
Hassan, Asmaa M. / ELMokadem, Ashraf A. / Megahed, Naglaa A. / Abo Eleinen, Osama M.	Urban morphology as a passive strategy in promoting outdoor air quality	101204
Do, Tan Manh / Kim, Hyeong-Ki / Kim, Min-Jun / Kim, Young-Sang	Utilization of controlled low strength material (CLSM) as a novel grout for geothermal systems: Laboratory and field experiments	101110
Afshoon, Iman / Sharifi, Yasser	Utilization of micro copper slag in SCC subjected to high temperature	101128
Franzoni, Elisa / Rirsch, Eric / Paselli, Yuri	Which methods are suitable to assess the effectiveness of chemical injection treatments in the laboratory?	101131
He, Bao-Jie / Ding, Lan / Prasad, Deo	Wind-sensitive urban planning and design: Precinct ventilation performance and its potential for local warming mitigation in an open midrise gridiron precinct	101145

About this
data sheet
IssueID
35512
Published on:
12/12/2019
Last updated on:
09/05/2022

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Journal of Building Engineering - May 2020

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Journal of Building Engineering - May 2020

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.