Frattura ed Integrità Strutturale - v. 16, n. 62 (September 2022)

Published:	September 2022

Articles in this Issue

Author(s)	Title	Page(s)
Ghannadi, Parsa / Kourehli, Seyed Sina / Mirjalili, Seyedali	The Application of PSO in Structural Damage Detection: An Analysis of the Previously Released Publications (2005–2020)	460-489
Santos, Juliana C. / de Morais, Marcus V. G. / Machado, Marcela R. / Silva, Ramon / Palechor, Erwin U. L. / Silva, Welington V.	Beam-like damage detection methodology using wavelet damage ratio and additional roving mass	349-363
Cantaboni, Francesco / Ginestra, Paola / Tocci, Marialaura / Avanzini, Andrea / Ceretti, Elisabetta / Pola, Annalisa	Compressive behavior of Co-Cr-Mo radially graded porous structures under as-built and heat-treated conditions	490-504
Brotzu, Andrea / De Filippo, Barbara / Natali, Stefano / Zortea, Laura	Corrosion behavior of Shape Memory Alloy in NaCl environment and recovery maintenance in Cu-Zn-Al sysytem	64-74
D'Andrea, Danilo / Risitano, Giacomo / Raffaele, Marcello / Cucinotta, Filippo / Santonocito, Dario	Damage assessment of different FDM-processed materials adopting Infrared Thermography	75-90
Milone, Dario / Santonocito, Dario	Deep Learning algorithm for the assessment of the first damage initiation monitoring the energy release of materials	505-515
Mondal, Avishek / Pilone, Daniela / Brotzu, Andrea / Felli, Ferdinando	Effect of composition and heat treatment on the mechanical properties of Fe Mn Al steels	624-633
Chapke, Yashwanth / Kamble, Dinesh N.	Effect of friction-welding parameters on the tensile strength of AA6063 with dissimilar joints	573-584
Kebaili, Bachir / Benzerara, Mohammed / Menadi, Souad / Kouider, Nadia / Belouettar, Redjem	Effect of parent concrete strength on recycled concrete performance	14-25
Tenaglia, Nicolás Emanuel / Fernandino, Diego / Basso, Alejandro Daniel	Effect of Ti addition and cast part size on solidification structure and mechanical properties of medium carbon, low alloy cast steel	212-224
Shlyannikov, Valery / Tumanov, Andrey / Boychenko, Nataliya	Elastic and nonlinear crack tip solutions comparison with respect to failure probability	1-13
Shestakov, Aleksey / Shardakov, Igor / Glot, Irina / Yepin, Valery / Gusev, Georgiy / Tsvetkov, Roman	Estimation of the nonlinear dependence of the indications of a fiber Bragg grating on temperature and strain from experimental data	561-572
Padzi, Mahfodzah / Ghazali, Farizah Adliza	Evaluation on fatigue behaviour of spot-welded joint under low blow impact treatment	271-278
Slimani, Faycal / Benzerara, Mohammed / Saidani, Messaoud	Experimental and numerical investigation of gap K-joints of rectangular hollow section trusses	107-125
Elmesiri, Mohamed / Fawzy Ahmed, Mohamed / Bneni, Mohamed / Elshami, Ahmed / Ahmad, Seleem	Experimentally evaluation of high-performance concrete mixes used for tunnels and containing silica fume and polypropylene fiber after exposed to high temperatures	408-425
Gouda, Shivakumar / Veeresh Kumar, G. B. / Pramod, R. / Prasanna, N. D. / Balasubramanya, H. S. / Aradhya, S. M.	Fabrication, Mechanical and Wear Properties of Aluminum (Al6061)-Silicon Carbide-Graphite Hybrid Metal Matrix Composites	134-149
Bouhiyadi, Samir / Souinida, Laidi / El Hassouani, Youssef	Failure analysis of compressed earth block using numerical plastic damage model	634-659
Iziumova, Anastasia / Vshivkov, Aleksei / Prokhorov, Aleksandr / Gachegova, Elena / Davydov, Denis	Heat dissipation and fatigue crack kinetic features of titanium alloy Grade 2 after laser shock peening	516-526
Toledo, Juan / Diaz, Felipe / Peralta, Matías / Fernandino, Diego	High-quality nodule analysis in spheroidal graphite cast iron using X-ray micro-computed tomography	279-288
Baruah, Monoj / Borah, Anil	Impact behaviour and fractography of 6061 alloy with Trace addition of Sn	126-133
Ravikumar, M. / Nail, Rudra	Impact of nano sized SiC and Gr on mechanical properties of aerospace grade Al7075 composites	439-447
Yankin, Andrey / Lykova, Anastasia / Mugatarov, Artur / Wildemann, Valeriy / Ilinykh, Artem	Influence of additional static stresses on biaxial low-cycle fatigue of 2024 aluminum alloy	180-193
Rao, Yermal Shriraj / Basavannadevaru, Shivamurthy / Subbarao, Nanjangud Mohan / Shetty, Nagaraja	Influence of hBN and MoS2 fillers on toughness and thermal stability of carbon fabric-epoxy composites	240-260
Lomakin, Evgeny / Fedulov, Boris / Fedorenko, Alexey	Influence of manufacturing shrinkage and microstructural features on the strength properties of carbon fibers/PEEK composite material	527-540
Saltan, Mehmet / Kaçaroğlu, Gizem / Karadağ, Öznur	Investigation of the Effect of Yarn Waste Fibers and Cocamide Diethanolamide Chemical on the Strength of Hot Mix Asphalt	54-63
Baryakh, Alexander / Tsayukov, Andrey	Justification of fracture criteria for salt rocks	585-601
Anil, K. C. / Kumaraswamy, J. / Reddy, Mahadeva / Prakash, Bhograj	Mechanical Behaviour and Fractured Surface Analysis of Bauxite Residue and Graphite Reinforced Aluminium Hybrid Composites	168-179
Bright, Renjin J. / Hariharasakthisudhan, P.	Mechanical characterization and analysis of tensile fracture modes of ultrasonically stir cast Al6082 composites reinforced with Cu powder premixed Metakaolin particles	426-438
Tioua, Tahar / Djeghader, Djamel / Redjel, Bachir	The Mechanical properties and statistical analysis of the Charpy impact test using the Weibull distribution in jute-polyester and glass-polyester composites	326-335
Maaty, Said / Elshami, Ahmed / Kamel, Fryal	Microstructure characterization of sustainable light weight concrete using trapped air additions.	194-211
Fauthan, Mohd 'Akashah / Abdullah, Shahrum / Abdullah, Mohamad Faizal / Mohamed, Intan Fadhlina	Multiple linear regression parameters for determining fatigue-based entropy characterisation of magnesium alloy	289-303
Guedaoura, Hamda / Hadidane, Yazid / Altaee, Mohammed J.	Numerical investigation on strengthening steel beams with web openings using GFRP	26-53
Ab Razak, Norhaida / Davies, C. M.	Numerical simulation of creep notched bar of P91 steel	261-270
Boulmaali-Hacene Chaouche, Yousria / Kouider, Nadia / Djeghaba, Kamel / Kebaili, Bachir	Numerical study of the plasticity effect on the behavior of short steel columns filled with concrete loaded axially	91-106
Sedira, Lakhdar / Tedjini, Mohsein / Guerira, Belhi / Meftah, Kamel	On the use of the stepped isostress method in the prediction of creep behavior of polyamide 6	336-348
Mishra, Akshansh / Dasgupta, Anish	Optimization of the Mechanical Property of Friction Stir Welded Heat Treatable Aluminum Alloy by using Bio-Inspired Artificial Intelligence Algorithms	448-459
Habibi, Samir	The P-h2 relationship as a function of (hf/hm) in indentation	613-623
Shaari, Mohd Shamil / Urai, Sylvia / Takahashi, Akiyuki / Mohd Romlay, Mohd Akramin	Predicting Fatigue Crack Growth Behavior of Coalesced Cracks Using the Global-Local Superimposed Technique	150-167
Eleonsky, Sviatoslav / Matvienko, Yury / Pisarev, Vladimir / Odintsev, Igor	Quantitative description of low-cycle fatigue damage accumulation in contact interaction zone by local strain evolution	541-560
Wang, Dan	Seismic vulnerability analysis of reinforced concrete frame with infill wall considering in-plane and out-of-plane interactions	364-384
Andreotti, Riccardo / Casaroli, Andrea / Quercia, Mauro / Boniardi, Marco V.	A simplified formula to estimate the load history due to ballistic impacts with bullet splash. Development and validation for finite element simulation of 9x21mm full metal jacket bullets	602-612
Veeresha, G. / Manjunatha, B. / Bharath, V. / Nagaral, Madeva / Auradi, Virupaxi	Synthesis, Microstructural Characterization, Mechanical, Fractographic and Wear Behavior of Micro B4C Particles Reinforced Al2618 Alloy Aerospace Composites	385-407
Madani, Kouider / Djebbar, Safaa Chahrazed / Kaddouri, Nadia / El Ajrami, Mohamed / Belhouari, Mohamed	Use of combined CZM and XFEM techniques for the patch shape performance analysis on the behavior of a 2024-T3 aluminum structure reinforced with a composite patch	304-325
Biskri, Yasmina / Benzerara, Mohammed / Babouri, Laidi / Dehas, Ouided / Belouettar, Redjem	Valorization and recycling of packaging belts and post-consumer PET bottles in the manufacture of sand concrete	225-239

About this
data sheet
IssueID
68814
Published on:
10/12/2022
Last updated on:
10/12/2022

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Frattura ed Integrità Strutturale - v. 16, n. 62 (September 2022)

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Frattura ed Integrità Strutturale - v. 16, n. 62 (September 2022)

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.