Frattura ed Integrità Strutturale - v. 16, n. 62 (septembre 2022)

Publié:	septembre 2022

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Ghannadi, Parsa / Kourehli, Seyed Sina / Mirjalili, Seyedali	The Application of PSO in Structural Damage Detection: An Analysis of the Previously Released Publications (2005–2020)	460-489
Santos, Juliana C. / de Morais, Marcus V. G. / Machado, Marcela R. / Silva, Ramon / Palechor, Erwin U. L. / Silva, Welington V.	Beam-like damage detection methodology using wavelet damage ratio and additional roving mass	349-363
Cantaboni, Francesco / Ginestra, Paola / Tocci, Marialaura / Avanzini, Andrea / Ceretti, Elisabetta / Pola, Annalisa	Compressive behavior of Co-Cr-Mo radially graded porous structures under as-built and heat-treated conditions	490-504
Brotzu, Andrea / De Filippo, Barbara / Natali, Stefano / Zortea, Laura	Corrosion behavior of Shape Memory Alloy in NaCl environment and recovery maintenance in Cu-Zn-Al sysytem	64-74
D'Andrea, Danilo / Risitano, Giacomo / Raffaele, Marcello / Cucinotta, Filippo / Santonocito, Dario	Damage assessment of different FDM-processed materials adopting Infrared Thermography	75-90
Milone, Dario / Santonocito, Dario	Deep Learning algorithm for the assessment of the first damage initiation monitoring the energy release of materials	505-515
Mondal, Avishek / Pilone, Daniela / Brotzu, Andrea / Felli, Ferdinando	Effect of composition and heat treatment on the mechanical properties of Fe Mn Al steels	624-633
Chapke, Yashwanth / Kamble, Dinesh N.	Effect of friction-welding parameters on the tensile strength of AA6063 with dissimilar joints	573-584
Kebaili, Bachir / Benzerara, Mohammed / Menadi, Souad / Kouider, Nadia / Belouettar, Redjem	Effect of parent concrete strength on recycled concrete performance	14-25
Tenaglia, Nicolás Emanuel / Fernandino, Diego / Basso, Alejandro Daniel	Effect of Ti addition and cast part size on solidification structure and mechanical properties of medium carbon, low alloy cast steel	212-224
Shlyannikov, Valery / Tumanov, Andrey / Boychenko, Nataliya	Elastic and nonlinear crack tip solutions comparison with respect to failure probability	1-13
Shestakov, Aleksey / Shardakov, Igor / Glot, Irina / Yepin, Valery / Gusev, Georgiy / Tsvetkov, Roman	Estimation of the nonlinear dependence of the indications of a fiber Bragg grating on temperature and strain from experimental data	561-572
Padzi, Mahfodzah / Ghazali, Farizah Adliza	Evaluation on fatigue behaviour of spot-welded joint under low blow impact treatment	271-278
Slimani, Faycal / Benzerara, Mohammed / Saidani, Messaoud	Experimental and numerical investigation of gap K-joints of rectangular hollow section trusses	107-125
Elmesiri, Mohamed / Fawzy Ahmed, Mohamed / Bneni, Mohamed / Elshami, Ahmed / Ahmad, Seleem	Experimentally evaluation of high-performance concrete mixes used for tunnels and containing silica fume and polypropylene fiber after exposed to high temperatures	408-425
Gouda, Shivakumar / Veeresh Kumar, G. B. / Pramod, R. / Prasanna, N. D. / Balasubramanya, H. S. / Aradhya, S. M.	Fabrication, Mechanical and Wear Properties of Aluminum (Al6061)-Silicon Carbide-Graphite Hybrid Metal Matrix Composites	134-149
Bouhiyadi, Samir / Souinida, Laidi / El Hassouani, Youssef	Failure analysis of compressed earth block using numerical plastic damage model	634-659
Iziumova, Anastasia / Vshivkov, Aleksei / Prokhorov, Aleksandr / Gachegova, Elena / Davydov, Denis	Heat dissipation and fatigue crack kinetic features of titanium alloy Grade 2 after laser shock peening	516-526
Toledo, Juan / Diaz, Felipe / Peralta, Matías / Fernandino, Diego	High-quality nodule analysis in spheroidal graphite cast iron using X-ray micro-computed tomography	279-288
Baruah, Monoj / Borah, Anil	Impact behaviour and fractography of 6061 alloy with Trace addition of Sn	126-133
Ravikumar, M. / Nail, Rudra	Impact of nano sized SiC and Gr on mechanical properties of aerospace grade Al7075 composites	439-447
Yankin, Andrey / Lykova, Anastasia / Mugatarov, Artur / Wildemann, Valeriy / Ilinykh, Artem	Influence of additional static stresses on biaxial low-cycle fatigue of 2024 aluminum alloy	180-193
Rao, Yermal Shriraj / Basavannadevaru, Shivamurthy / Subbarao, Nanjangud Mohan / Shetty, Nagaraja	Influence of hBN and MoS2 fillers on toughness and thermal stability of carbon fabric-epoxy composites	240-260
Lomakin, Evgeny / Fedulov, Boris / Fedorenko, Alexey	Influence of manufacturing shrinkage and microstructural features on the strength properties of carbon fibers/PEEK composite material	527-540
Saltan, Mehmet / Kaçaroğlu, Gizem / Karadağ, Öznur	Investigation of the Effect of Yarn Waste Fibers and Cocamide Diethanolamide Chemical on the Strength of Hot Mix Asphalt	54-63
Baryakh, Alexander / Tsayukov, Andrey	Justification of fracture criteria for salt rocks	585-601
Anil, K. C. / Kumaraswamy, J. / Reddy, Mahadeva / Prakash, Bhograj	Mechanical Behaviour and Fractured Surface Analysis of Bauxite Residue and Graphite Reinforced Aluminium Hybrid Composites	168-179
Bright, Renjin J. / Hariharasakthisudhan, P.	Mechanical characterization and analysis of tensile fracture modes of ultrasonically stir cast Al6082 composites reinforced with Cu powder premixed Metakaolin particles	426-438
Tioua, Tahar / Djeghader, Djamel / Redjel, Bachir	The Mechanical properties and statistical analysis of the Charpy impact test using the Weibull distribution in jute-polyester and glass-polyester composites	326-335
Maaty, Said / Elshami, Ahmed / Kamel, Fryal	Microstructure characterization of sustainable light weight concrete using trapped air additions.	194-211
Fauthan, Mohd 'Akashah / Abdullah, Shahrum / Abdullah, Mohamad Faizal / Mohamed, Intan Fadhlina	Multiple linear regression parameters for determining fatigue-based entropy characterisation of magnesium alloy	289-303
Guedaoura, Hamda / Hadidane, Yazid / Altaee, Mohammed J.	Numerical investigation on strengthening steel beams with web openings using GFRP	26-53
Ab Razak, Norhaida / Davies, C. M.	Numerical simulation of creep notched bar of P91 steel	261-270
Boulmaali-Hacene Chaouche, Yousria / Kouider, Nadia / Djeghaba, Kamel / Kebaili, Bachir	Numerical study of the plasticity effect on the behavior of short steel columns filled with concrete loaded axially	91-106
Sedira, Lakhdar / Tedjini, Mohsein / Guerira, Belhi / Meftah, Kamel	On the use of the stepped isostress method in the prediction of creep behavior of polyamide 6	336-348
Mishra, Akshansh / Dasgupta, Anish	Optimization of the Mechanical Property of Friction Stir Welded Heat Treatable Aluminum Alloy by using Bio-Inspired Artificial Intelligence Algorithms	448-459
Habibi, Samir	The P-h2 relationship as a function of (hf/hm) in indentation	613-623
Shaari, Mohd Shamil / Urai, Sylvia / Takahashi, Akiyuki / Mohd Romlay, Mohd Akramin	Predicting Fatigue Crack Growth Behavior of Coalesced Cracks Using the Global-Local Superimposed Technique	150-167
Eleonsky, Sviatoslav / Matvienko, Yury / Pisarev, Vladimir / Odintsev, Igor	Quantitative description of low-cycle fatigue damage accumulation in contact interaction zone by local strain evolution	541-560
Wang, Dan	Seismic vulnerability analysis of reinforced concrete frame with infill wall considering in-plane and out-of-plane interactions	364-384
Andreotti, Riccardo / Casaroli, Andrea / Quercia, Mauro / Boniardi, Marco V.	A simplified formula to estimate the load history due to ballistic impacts with bullet splash. Development and validation for finite element simulation of 9x21mm full metal jacket bullets	602-612
Veeresha, G. / Manjunatha, B. / Bharath, V. / Nagaral, Madeva / Auradi, Virupaxi	Synthesis, Microstructural Characterization, Mechanical, Fractographic and Wear Behavior of Micro B4C Particles Reinforced Al2618 Alloy Aerospace Composites	385-407
Madani, Kouider / Djebbar, Safaa Chahrazed / Kaddouri, Nadia / El Ajrami, Mohamed / Belhouari, Mohamed	Use of combined CZM and XFEM techniques for the patch shape performance analysis on the behavior of a 2024-T3 aluminum structure reinforced with a composite patch	304-325
Biskri, Yasmina / Benzerara, Mohammed / Babouri, Laidi / Dehas, Ouided / Belouettar, Redjem	Valorization and recycling of packaging belts and post-consumer PET bottles in the manufacture of sand concrete	225-239

Informations
sur cette fiche
IssueID
68814
Publié(e) le:
10.12.2022
Modifié(e) le:
10.12.2022

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Frattura ed Integrità Strutturale - v. 16, n. 62 (septembre 2022)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Frattura ed Integrità Strutturale - v. 16, n. 62 (septembre 2022)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.