0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Influence of manufacturing shrinkage and microstructural features on the strength properties of carbon fibers/PEEK composite material

Auteur(s):


Médium: article de revue
Langue(s): anglais
Publié dans: Frattura ed Integrità Strutturale, , n. 62, v. 16
Page(s): 527-540
DOI: 10.3221/igf-esis.62.36
Abstrait:

This research discusses the micromechanical modelling for thermoplastic composite material. Elastoplastic and damage model for PEEK matrix composite with the dependency of properties to stress state is presented. Plasticity initiation conditions and failure criterion are analyzed. The influence of manufacturing residual stresses is considered. All typical engineering experiments for neat PEEK under different stress state are good predicted by the model. Numerical experiment for macro-properties estimation based on micromechanical model is conducted and the results are compared with the test data.

Structurae ne peut pas vous offrir cette publication en texte intégral pour l'instant. Le texte intégral est accessible chez l'éditeur. DOI: 10.3221/igf-esis.62.36.
  • Informations
    sur cette fiche
  • Reference-ID
    10702999
  • Publié(e) le:
    11.12.2022
  • Modifié(e) le:
    11.12.2022
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine