Frattura ed Integrità Strutturale - v. 16, n. 61 (June 2022)

Published:	June 2022

Author(s)	Title	Page(s)
Razali, Noorhelyna / Masnoor, Nisa Balqis / Abdullah, Shahrum / Mohd Zainaphi, Muhammad Faiz Hilmi	Acoustic Analysis Using Symmetrised Implicit Midpoint Rule	214-229
Patil, Hiralal S. / Patel, D. C.	Al2O3 and TiO2 flux enabling activated tungsten inert gas welding of 304 austenitic stainless steel plates	59-68
Oliveira Batista da Costa, Patrick / Mara Bosse, Rubia / de Miranda Saleme Gidrão, Gustavo	Behavior assessment of asymmetrical building with concrete damage plasticity (CDP) under seismic load	108-118
Achour, Toufik / Mili, Fayçal	Composite lay-up configuration effect on double and single sided bonded patch repairs	327-337
Shlyannikov, Valery / Inozemtsev, Aleksandr / Ratchiev, Aleksey	Couple effects of temperature and fatigue, creep-fatigue interaction and thermo-mechanical loading conditions on crack growth rate of nickel-based alloy	46-58
Firdaus, Syed Muhamad / Arifin, Azli / Abdullah, Shahrum / Karam Singh, Salvinder Singh / Md Nor, Noorsuhada	Detection of Uniaxial Fatigue Stress under Magnetic Flux Leakage Signals using Morlet Wavelet	254-265
Rahmani, Abdallah Yacine / Boukhalkhal, Said Hicham / Badaoui, Mohamed	Effect of beam-column joints flexibility on the seismic response of setback RC buildings designed according to the Algerian seismic code	394-409
Ashoka, E. / Sharanaprabhu, C. M. / Krishnaraja, G. Kodancha	Effect of cenosphere and specimen crack lengths on the fracture toughness of Al6061-SiC composites	473-486
Elsadany, Rasha / Al-Tersawy, Sherif H. / Sallam, Hossam El-Din M.	Effect of reinforcement type on structural behavior of RC beams containing recycled aggregate	294-307
Umarfarooq, M. A. / Gouda, P. S. Shivakumar / Bharath, K. N. / Veereshkumar, G. B. / Banapurmath, N. R. / Edacherian, Abhilash	Effects of residual stresses on interlaminar radial strength of Glass-Epoxy L-bend composite laminates	140-153
Saleh, Faisal A. H. / Kaid, Nouria / Ayed, Kada / Kerdal, Djamel-Eddine / Chioukh, Nadjib / Leklou, Nordine	Effects of rubber aggregates on the physical-mechanical, thermal and durability properties of self-compacting sand concrete	89-107
Joshi, Prahlad / Panigrahi, Shrikant	Evaluation of Tensile properties of FRP Composite Laminates under Varying Strain Rates and Temperatures	338-351
Kahama, Espoir / Fuzhe, Xie / Lu, Chunhua / Offei, Isaac	Experimental and numerical assessment of the location-based impact of grouting defects on the tensile performance of the fully grouted sleeve connection	437-460
Khamis, Magdy Khalaf / Ashraf El-Shihy, Ashraf El-Shihy / El-Sayed El-Kasaby, El-Sayed El-Kasaby / Ahmad Youssef, Ahmad Youssef	Experimental behavior based on effective slab width acting as a flange with supporting steel beams in composite floors with openings	308-326
Nguyen-Ngoc, Long / Nguyen Van, Hau / Bui Tien, Thanh / Pham Van, Phe	An experimental study and a proposed theoretical solution for the prediction of the ductile/brittle failure modes of reinforced concrete beams strengthened with external steel plates	198-213
Ferrian, Francesco / Cornetti, Pietro / Marsavina, Liviu / Sapora, Alberto	Finite Fracture Mechanics and Cohesive Crack Model: Size effects through a unified formulation	496-509
Kostina, Anastasiia / Zhelnin, Maxim / Gachegova, Elena / Prokhorov, Alexander / Vshivkov, Aleksei / Plekhov, Oleg / Swaroop, Sathya	Finite-element study of residual stress distribution in Ti-6Al-4V alloy treated by laser shock peening with varying parameters	419-436
Hadidane, Yazid / Kouider, Nadia / Benzerara, Mohammed	Flexural behavior of delta and bi-delta cold-formed steel beams: experimental investigation and numerical analysis	69-88
Bellini, Costanzo / Di Cocco, Vittorio / Iacoviello, Francesco / Mocanu, Larisa Patricia	Fracture micrographic analysis of a carbon FML under three-point bending load	410-418
Santillan Sanchez, David / Mazighi, Hichem / Mihoubi, Mustapha Kamel	Hybrid phase-field modeling of multi-level concrete gravity dam notched cracks	154-175
Arfaoui, Latifa / Samet, Amel / Znaidi, Amna	Identification of the anisotropic behavior of the laser welded Interstitial Free steel HC260Y subjected to uniaxial tensile tests	282-293
ELShami, A. A. / Essam, Noura / Yousry, El-Shikh M.	Improvement of hydration products for self-compacting concrete by using magnetized water	352-371
Basso, Alejandro Daniel / Caldera, Martin / Tenaglia, Nicolás Emanuel / Fernandino, Diego / Boeri, Roberto Enrique	Influence of Free Ferrite on the Mechanical Properties of High Strength Intercritical Austempered Ductile Iron	519-529
Ononiwu, Ndudim / Ozoegwu, Chigbogu / Ifeanyi, Jacobs / Nwachukwu, Victor / Akinlabi, Esther	The influence of sustainable reinforcing particulates on the density, hardness and corrosion resistance of AA 6063 matrix composites	510-518
Salem, Tarek / Eraky, Atef / Elmesallamy, Abdalla	Locating and Quantifying Necking in Piles Through Numerical Simulation of PIT	461-472
Sreekanth, T. G. / Senthilkumar, M. / Reddy, S. Manikanta	Natural Frequency based delamination estimation in GFRP beams using RSM and ANN	487-495
Zengah, Sahnoun / Mankour, Abdeljelil / Abderahmane, Sahli / Salah, Hichem / Mallek, Abdelhafid / Bouziane, Mohammed Mokhtar	Numerical Analysis of the Crack Growth Path in the Cement of Hip Spacers	266-281
Shamsul Baharin, Muhammad / Abdullah, Shahrum / Md Nor, Noorsuhada / Muhamad Paudzi, Mohd Khairul Faidzi / Arifin, Azli / Karam Singh, Salvinder Singh	Observing the simulation behaviour of Magnesium alloy metal sandwich panel under cyclic loadings	230-243
Meor Ahmad, Meor Iqram / Mohd Sabri, Mohd Anas / Mat Tahir, Mohd Faizal / Abdullah, Nur Azam	Predictive Modelling of Creep Crack Initiation and Growth using Extended Finite Element Method (XFEM)	119-129
Entezari, Ehsan / González-Velázquez, Jorge Luis / Rivas López, Diego / Zúñiga, Manuel Alejandro Beltrán / Szpunar, Jerzy A.	Review of Current Developments on High Strength Pipeline Steels for HIC Inducing Service	20-45
Belkaid, Khmissi / Boutasseta, Nadir / Aouaichia, Hamza / Gaagaia, Djamel Eddine / Deliou, Adel / Boubir, Badreddine	A Simple and Efficient eight node Finite Element for Multilayer Sandwich Composite Plates Bending Behavior Analysis	372-393
Andreotti, Riccardo / Leggewri, Valentina / Casaroli, Andrea / Quercia, Mauro / Bettin, Cristian / Zanella, Mauro / Boniardi, Marco V.	A simplified constitutive model for a SEBS gel muscle simulant - Development and experimental validation for finite elements simulations of handgun and rifle ballistic impacts	176-197
Kerkar, Mohamed Essaddik / Mihoubi, Mustapha Kamel	Study of Structural Stability of a Concrete Gravity Dam Using a Reliability Approach	530-544
Suchendra, K. R. / Sreenivasa, Reddy M. / Ravikumar, M.	A Study on microstructure, mechanical and fracture behavior of Al2O3 - MoS2 reinforced Al6061 hybrid composite	244-253
Kostina, Anastasiia / Zhelnin, Maxim / Plekhov, Oleg / Agutin, Kirill	THM-coupled numerical analysis of temperature and groundwater level in-situ measurements in artificial ground freezing	1-19
Huzni, Syifaul / Oktianda, Fikrir / Fonna, Syarizal / Rahiem, Fazal / Angriani, Lilis	The use of frictional and bonded contact models in finite element analysis for internal fixation of tibia fracture	130-139

Author(s)

Title

Page(s)

Razali, Noorhelyna / Masnoor, Nisa Balqis / Abdullah, Shahrum / Mohd Zainaphi, Muhammad Faiz Hilmi

Acoustic Analysis Using Symmetrised Implicit Midpoint Rule

214-229

Patil, Hiralal S. / Patel, D. C.

Al2O3 and TiO2 flux enabling activated tungsten inert gas welding of 304 austenitic stainless steel plates

59-68

Oliveira Batista da Costa, Patrick / Mara Bosse, Rubia / de Miranda Saleme Gidrão, Gustavo

Behavior assessment of asymmetrical building with concrete damage plasticity (CDP) under seismic load

108-118

Achour, Toufik / Mili, Fayçal

Composite lay-up configuration effect on double and single sided bonded patch repairs

327-337

Shlyannikov, Valery / Inozemtsev, Aleksandr / Ratchiev, Aleksey

Couple effects of temperature and fatigue, creep-fatigue interaction and thermo-mechanical loading conditions on crack growth rate of nickel-based alloy

46-58

Firdaus, Syed Muhamad / Arifin, Azli / Abdullah, Shahrum / Karam Singh, Salvinder Singh / Md Nor, Noorsuhada

Detection of Uniaxial Fatigue Stress under Magnetic Flux Leakage Signals using Morlet Wavelet

254-265

Rahmani, Abdallah Yacine / Boukhalkhal, Said Hicham / Badaoui, Mohamed

Effect of beam-column joints flexibility on the seismic response of setback RC buildings designed according to the Algerian seismic code

394-409

Ashoka, E. / Sharanaprabhu, C. M. / Krishnaraja, G. Kodancha

Effect of cenosphere and specimen crack lengths on the fracture toughness of Al6061-SiC composites

473-486

Elsadany, Rasha / Al-Tersawy, Sherif H. / Sallam, Hossam El-Din M.

Effect of reinforcement type on structural behavior of RC beams containing recycled aggregate

294-307

Umarfarooq, M. A. / Gouda, P. S. Shivakumar / Bharath, K. N. / Veereshkumar, G. B. / Banapurmath, N. R. / Edacherian, Abhilash

Effects of residual stresses on interlaminar radial strength of Glass-Epoxy L-bend composite laminates

140-153

Saleh, Faisal A. H. / Kaid, Nouria / Ayed, Kada / Kerdal, Djamel-Eddine / Chioukh, Nadjib / Leklou, Nordine

Effects of rubber aggregates on the physical-mechanical, thermal and durability properties of self-compacting sand concrete

89-107

Joshi, Prahlad / Panigrahi, Shrikant

Evaluation of Tensile properties of FRP Composite Laminates under Varying Strain Rates and Temperatures

338-351

Kahama, Espoir / Fuzhe, Xie / Lu, Chunhua / Offei, Isaac

Experimental and numerical assessment of the location-based impact of grouting defects on the tensile performance of the fully grouted sleeve connection

437-460

Khamis, Magdy Khalaf / Ashraf El-Shihy, Ashraf El-Shihy / El-Sayed El-Kasaby, El-Sayed El-Kasaby / Ahmad Youssef, Ahmad Youssef

Experimental behavior based on effective slab width acting as a flange with supporting steel beams in composite floors with openings

308-326

Nguyen-Ngoc, Long / Nguyen Van, Hau / Bui Tien, Thanh / Pham Van, Phe

An experimental study and a proposed theoretical solution for the prediction of the ductile/brittle failure modes of reinforced concrete beams strengthened with external steel plates

198-213

Ferrian, Francesco / Cornetti, Pietro / Marsavina, Liviu / Sapora, Alberto

Finite Fracture Mechanics and Cohesive Crack Model: Size effects through a unified formulation

496-509

Kostina, Anastasiia / Zhelnin, Maxim / Gachegova, Elena / Prokhorov, Alexander / Vshivkov, Aleksei / Plekhov, Oleg / Swaroop, Sathya

Finite-element study of residual stress distribution in Ti-6Al-4V alloy treated by laser shock peening with varying parameters

419-436

Hadidane, Yazid / Kouider, Nadia / Benzerara, Mohammed

Flexural behavior of delta and bi-delta cold-formed steel beams: experimental investigation and numerical analysis

69-88

Bellini, Costanzo / Di Cocco, Vittorio / Iacoviello, Francesco / Mocanu, Larisa Patricia

Fracture micrographic analysis of a carbon FML under three-point bending load

410-418

Santillan Sanchez, David / Mazighi, Hichem / Mihoubi, Mustapha Kamel

Hybrid phase-field modeling of multi-level concrete gravity dam notched cracks

154-175

Arfaoui, Latifa / Samet, Amel / Znaidi, Amna

Identification of the anisotropic behavior of the laser welded Interstitial Free steel HC260Y subjected to uniaxial tensile tests

282-293

ELShami, A. A. / Essam, Noura / Yousry, El-Shikh M.

Improvement of hydration products for self-compacting concrete by using magnetized water

352-371

Basso, Alejandro Daniel / Caldera, Martin / Tenaglia, Nicolás Emanuel / Fernandino, Diego / Boeri, Roberto Enrique

Influence of Free Ferrite on the Mechanical Properties of High Strength Intercritical Austempered Ductile Iron

519-529

Ononiwu, Ndudim / Ozoegwu, Chigbogu / Ifeanyi, Jacobs / Nwachukwu, Victor / Akinlabi, Esther

The influence of sustainable reinforcing particulates on the density, hardness and corrosion resistance of AA 6063 matrix composites

510-518

Salem, Tarek / Eraky, Atef / Elmesallamy, Abdalla

Locating and Quantifying Necking in Piles Through Numerical Simulation of PIT

461-472

Sreekanth, T. G. / Senthilkumar, M. / Reddy, S. Manikanta

Natural Frequency based delamination estimation in GFRP beams using RSM and ANN

487-495

Zengah, Sahnoun / Mankour, Abdeljelil / Abderahmane, Sahli / Salah, Hichem / Mallek, Abdelhafid / Bouziane, Mohammed Mokhtar

Numerical Analysis of the Crack Growth Path in the Cement of Hip Spacers

266-281

Shamsul Baharin, Muhammad / Abdullah, Shahrum / Md Nor, Noorsuhada / Muhamad Paudzi, Mohd Khairul Faidzi / Arifin, Azli / Karam Singh, Salvinder Singh

Observing the simulation behaviour of Magnesium alloy metal sandwich panel under cyclic loadings

230-243

Meor Ahmad, Meor Iqram / Mohd Sabri, Mohd Anas / Mat Tahir, Mohd Faizal / Abdullah, Nur Azam

Predictive Modelling of Creep Crack Initiation and Growth using Extended Finite Element Method (XFEM)

119-129

Entezari, Ehsan / González-Velázquez, Jorge Luis / Rivas López, Diego / Zúñiga, Manuel Alejandro Beltrán / Szpunar, Jerzy A.

Review of Current Developments on High Strength Pipeline Steels for HIC Inducing Service

20-45

Belkaid, Khmissi / Boutasseta, Nadir / Aouaichia, Hamza / Gaagaia, Djamel Eddine / Deliou, Adel / Boubir, Badreddine

A Simple and Efficient eight node Finite Element for Multilayer Sandwich Composite Plates Bending Behavior Analysis

372-393

Andreotti, Riccardo / Leggewri, Valentina / Casaroli, Andrea / Quercia, Mauro / Bettin, Cristian / Zanella, Mauro / Boniardi, Marco V.

A simplified constitutive model for a SEBS gel muscle simulant - Development and experimental validation for finite elements simulations of handgun and rifle ballistic impacts

176-197

Kerkar, Mohamed Essaddik / Mihoubi, Mustapha Kamel

Study of Structural Stability of a Concrete Gravity Dam Using a Reliability Approach

530-544

Suchendra, K. R. / Sreenivasa, Reddy M. / Ravikumar, M.

A Study on microstructure, mechanical and fracture behavior of Al2O3 - MoS2 reinforced Al6061 hybrid composite

244-253

Kostina, Anastasiia / Zhelnin, Maxim / Plekhov, Oleg / Agutin, Kirill

THM-coupled numerical analysis of temperature and groundwater level in-situ measurements in artificial ground freezing

1-19

Huzni, Syifaul / Oktianda, Fikrir / Fonna, Syarizal / Rahiem, Fazal / Angriani, Lilis

The use of frictional and bonded contact models in finite element analysis for internal fixation of tibia fracture

130-139

Advertisement

Frattura ed Integrità Strutturale - v. 16, n. 61 (June 2022)

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Frattura ed Integrità Strutturale - v. 16, n. 61 (June 2022)

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.