Frattura ed Integrità Strutturale - v. 11, n. 41 (June 2017)

Published:	June 2017

Articles in this Issue

Author(s)	Title	Page(s)
Razavi, S. M. J. / Peron, M. / Torgersen, J. / Berto, F. / Welo, T.	40CrMoV13.9 notched specimens under multiaxial fatigue: an overview of recent results	440-446
Kourkoulis, Stavros K. / Dakanali, Ioanna / Pasiou, Ermioni D. / Stavrakas, Ilias / Triantis, Dimos	Acoustic Emissions versus Pressure Stimulated Currents during bending of restored marble epistyles: Preliminary results	536-551
Rizov, Victor	Analysis of longitudinal cracked two-dimensional functionally graded beams exhibiting material non-linearity	491-503
Giannini de Cunto, Gabriel / de Andrade, Arnaldo Homobono Paes / Monteiro, Waldemar Alfredo	Application of Leak-Before-Break concept in 316LN austenitic steel pipes welded using 316L	332-338
Wu, Xu / Dai, Li	Carbon nano-tubes in improving the mechanical property of cement-based composite materials	388-395
Meneghetti, Giovanni / Campagnolo, Alberto / Berto, Filippo / Tanaka, Keisuke	Crack initiation life in notched Ti-6Al-4V titanium bars under uniaxial and multiaxial fatigue: synthesis based on the averaged strain energy density approach	8-15
Toribio, J. / González, B. / Matos, J. C.	Crack tip field in circumferentially-cracked round bar (CCRB) in tension affected by loss of axial symmetry	139-142
Wang, De-Qiang / Zhu, Ming-Liang / Xuan, Fu-Zhen	Crack tip strain evolution and crack closure during overload of a growing fatigue crack	143-148
Berto, F.	Cracked components under anti-plane loading: recent outcomes and future developments	475-483
Sakane, Masao / Itoh, Takamoto	Cracking directions in multiaxial low cycle fatigue at high and room temperatures	16-23
Gallo, P. / Razavi, S. M. J. / Peron, M. / Torgersen, J. / Berto, F.	Creep behavior of V-notched components	456-463
Nurullaev, E. / Ermilov, A. S. / Lyubimova, N. Yu.	Dependence of mechanical characteristics from composition and structure and optimization of mechanical fracture energy of polymer composite material based on high-molecular rubbers	369-377
Kurek, Marta / agoda, Tadeusz	Determination of the critical plane orientation depending on the fatigue curves for bending and torsion	24-30
Funari, Marco Francesco / Greco, Fabrizio / Lonetti, Paolo	Dynamic debonding in layered structures: a coupled ALE-cohesive approach	524-535
Shlyannikov, V. / Tumanov, A.	The effect of creep damage formulation on crack tip fields, creep stress intensity factor and crack growth assessments	285-292
Shlyannikov, V. / Yarullin, R. / Ishtyryakov, I.	Effect of different environmental conditions on surface crack growth in aluminum alloys	31-39
Razavi, S. M. J. / Peron, M. / Torgersen, J. / Berto, F. / Mutignani, F.	Effect of hot dip galvanization on the fatigue strength of steel bolted connections	432-439
Antunes, F. V. / Simões, R. / Branco, R. / Prates, P.	Effect of numerical parameters on plastic CTOD	149-156
Chernyatin, A. S. / Matvienko, Yu. G. / Razumovsky, I. A.	The effect of residual stress on the nonsingular T-stresses	293-298
Carpinteri, Andrea / Spagnoli, Andrea / Vantadori, Sabrina	Effect of spectral cross-correlation on multiaxial fatigue damage: simulations using the critical plane approach	40-44
Morishita, Takahiro / Ogawa, Fumio / Itoh, Takamoto	Evaluation and visualization of multiaxial fatigue behavior under random non-proportional loading condition	45-53
Cruces, A. S. / Lopez-Crespo, P. / Moreno, B. / Lopez-Moreno, A. / Suman, S.	Evaluation of new multiaxial damage parameters on low carbon steel	54-61
Vasco-Olmo, J. M. / Díaz, F. A. / Antunes, F. V. / James, M. N.	Experimental evaluation of CTOD in constant amplitude fatigue crack growth from crack tip displacement fields	157-165
Vasco-Olmo, J. M. / Díaz, F. A. / James, M. N. / Christopher, C. J. / Patterson, E. A.	Experimental methodology for the quantification of crack tip plastic zone and shape from the analysis of displacement fields	166-174
Zhao, Songying / Chen, Lei / Fu, Yan	An experimental study on mechanical properties of fiber-reinforced concrete of energy piles	412-423
Chebat, F. / Cincera, M. / Razavi, S. M. J. / Berto, F. / Welo, T.	Fatigue assessment of steel rollers by means of the local energy	447-455
Mardalizad, Aria / Scazzosi, Riccardo / Manes, Andrea / Giglio, Marco	Four-point bending test on a middle strength rock: numerical and experimental investigations	504-523
Doddamani, Saleemsab / Kaleemulla, Mohamed	Fracture toughness investigations of Al6061-Graphite particulate composite using compact specimens	484-490
Carpinteri, Andrea / Spagnoli, Andrea / Terzano, Michele / Vantadori, Sabrina	Fracture toughness of rough and frictional cracks emanating from a re-entrant corner	175-182
Nadot, Y. / Halm, D. / Dal Cero Coelho, F.	Gradient approach for the evaluation of the fatigue limit of welded structures under complex loading	220-226
Meneghetti, G. / Ricotta, M.	The heat energy dissipated in a control volume to correlate the crack propagation rate in stainless steel specimens	299-306
Klon, J. / Sobek, J. / Malíkova, L. / Seitl, S.	Impact of specific fracture energy investigated in front of the crack tip of three-point bending specimen	183-190
Toribio, J. / Matos, J. C. / González, B.	Influence of crack micro-roughness on the plasticity-induced fatigue propagation in high strength steel	62-65
Cernescu, Anghel	The influence of crack tip shielding on fatigue crack propagation	307-313
Lorenzino, Pablo / Buffiere, Jean-Yves / Verdu, Catherine	Influence of forging conditions on the fatigue mechanisms of low alloy steels: a 3D study	191-196
Carpinteri, Andrea / Fortese, Giovanni / Ronchei, Camilla / Scorza, Daniela / Vantadori, Sabrina / Berto, Filippo	Joined application of a multiaxial critical plane criterion and a strain energy density criterion in low-cycle fatigue	66-70
Nowell, D. / Dragnevski, K. I. / O'Connor, S. J.	Measurement and analysis of fatigue crack deformation at the micro-scale	197-202
Lopez-Crespo, P. / Vazquez-Peralta, J. / Simpson, C. / Buslaps, T. / Withers, P. J.	Mid-thickness studies of the stress intensity factor in the bulk of bainitic steel	203-210
Ferreira, Samuel Elias / Pinho de Castro, Jaime Tupiassú / Meggiolaro, Marco Antonio	A model to quantify fatigue crack growth by cyclic damage accumulation calculated by strip-yield procedures	129-138
Simonova, H. / Vyhlidal, M. / Kucharczyková, B. / Bayer, P. / Keršner, Z. / Malíkova, L. / Klusák, J.	Modelling of interfacial transition zone effect on resistance to crack propagation in fine-grained cement-based composites	211-219
Morishita, Takahiro / Takada, Yuta / Itoh, Takamoto	Multiaxial fatigue property of type 316 stainless steel using hollow cylinder specimen under combined pull loading and inner pressure	71-78
Berto, Filippo / Campagnolo, Alberto / Welo, Torgeir / Vantadori, Sabrina / Carpinteri, Andrea	Multiaxial fatigue strength of titanium alloys	79-89
Razavi, S. M. J. / Peron, M. / Torgersen, J. / Berto, F.	Notched graphite under multiaxial loading	424-431
Sá, M. V. C. / Ferreira, J. L. A. / da Silva, C. R. M. / Araújo, J. A.	Notched multiaxial fatigue of Al7050-T7451: on the need for an equivalent process zone size	90-97
Ortiz González, Julián Andrés / Pinho de Castro, Jaime Tupiassú / Gomez Gonzáles, Giancarlo Luis / Meggiolaro, Marco Antonio / de França Freire, José Luiz	On DIC measurements of DeltaKeff to verify if it is the FCG driving force	227-235
Machado, Verônica Miquelin / Pinho de Castro, Jaime Tupiassú / Meggiolaro, Marco Antonio	On short cracks that depart from elastoplastic notch tips	236-244
Meggiolaro, Marco Antonio / Pinho de Castro, Jaime Tupiassú / Ferreira, Samuel Elias / Wu, Hao	On the applicability of Miner’s rule for multiaxial fatigue life calculations under non-proportional load histories	98-105
Vojtek, Tomas / Zak, Stanislav / Pokluda, Jaroslav	On the connection between mode II and mode III effective thresholds in metals	245-251
Ahmed, Adnan A. / Susmel, Luca	On the use of length scale parameters to assess the static strength of notched 3D-printed PLA	252-259
De Salvo, Roberto Maria	An original method of direct calculation for the identification of the last hinge and the definition of the deformative state at collapse	350-355
Markides, Christos F. / Kourkoulis, Stavros K.	Parametric study of the deformation of transversely isotropic discs under diametral compression	396-411
Sahadi, J. V. / Nowell, D. / Paynter, R. J. H.	Prediction of fatigue crack initiation under biaxial loading	106-113
Tolmacheva (Lyapunova), E. / Davydova, M. / Chudinov, V. / Uvarov, S. / Naimark, O. / Zaytsev, D. / Panfilov, P.	Regularities of fracture pattern formation in alumina ceramics subjected to dynamic indentation	552-561
Yang, Yi / Zheng, Jianlong / Lu, Songtao	Research on differences and correlation between tensile, compression and flexural moduli of cement stabilized macadam	339-349
Li, Zhiyuan / Zhao, Zhiyun	Residual welding stress of I-section members beyond the limits of width-thickness ratio	378-387
Berto, F. / Ayatollahi, M. R. / Vantadori, S. / Carpinteri, A.	Review of the Influence of non-singular higher order terms on the stress field of thin welded lap joints and small inclined cracks in plates	260-268
Vormwald, M. / Shams, E.	Sharp three-dimensional notches under combined nominal normal and shear fatigue loading	114-122
Slámecka, K. / Pokluda, J.	Simple criterion for predicting fatigue life under combined bending and torsion loading	123-128
Beretta, S. / Patriarca, L. / Rabbolini, S.	Stress Intensity Factor calculation from displacement fields	269-276
Patriarca, L. / Luccarelli, P. G. / Foletti, S.	Study of strain localizations in a polycrystalline medium in presence of a quasi-static crack	277-284
Zhang, Luchen / Li, Shuchen / Yan, Qin / Zhu, Lin	Study on the effect of new type liquid accelerator on the performance of shotcrete	356-368
Meggiolaro, Marco Antonio / Pinho de Castro, Jaime Tupiassú / Wu, Hao	A two-step multiaxial racetrack filter algorithm for non-proportional load histories	1-7
Berto, F.	V-notch tip subjected to in-plane mixed mode loading: overview of recent results and possible future outcomes	464-474
Vormwald, Michael / Hos, Yigiter / Freire, José L. F. / Gonzáles, Giancarlo L. G. / Díaz, Jorge G.	Variable mode-mixity during fatigue cycles – crack tip parameters determined from displacement fields measured by digital image correlation	314-322
Seitl, S. / Malíkova, L. / Sobek, J. / Frantík, P. / Lopez-Crespo, P.	Williams expansion-based approximation of the stress field in an Al 2024 body with a crack from optical measurements	323-331

About this
data sheet
IssueID
37993
Published on:
24/10/2020
Last updated on:
24/10/2020

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Frattura ed Integrità Strutturale - v. 11, n. 41 (June 2017)

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Frattura ed Integrità Strutturale - v. 11, n. 41 (June 2017)

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.