Frattura ed Integrità Strutturale - v. 11, n. 41 (juin 2017)

Publié:	juin 2017

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Razavi, S. M. J. / Peron, M. / Torgersen, J. / Berto, F. / Welo, T.	40CrMoV13.9 notched specimens under multiaxial fatigue: an overview of recent results	440-446
Kourkoulis, Stavros K. / Dakanali, Ioanna / Pasiou, Ermioni D. / Stavrakas, Ilias / Triantis, Dimos	Acoustic Emissions versus Pressure Stimulated Currents during bending of restored marble epistyles: Preliminary results	536-551
Rizov, Victor	Analysis of longitudinal cracked two-dimensional functionally graded beams exhibiting material non-linearity	491-503
Giannini de Cunto, Gabriel / de Andrade, Arnaldo Homobono Paes / Monteiro, Waldemar Alfredo	Application of Leak-Before-Break concept in 316LN austenitic steel pipes welded using 316L	332-338
Wu, Xu / Dai, Li	Carbon nano-tubes in improving the mechanical property of cement-based composite materials	388-395
Meneghetti, Giovanni / Campagnolo, Alberto / Berto, Filippo / Tanaka, Keisuke	Crack initiation life in notched Ti-6Al-4V titanium bars under uniaxial and multiaxial fatigue: synthesis based on the averaged strain energy density approach	8-15
Toribio, J. / González, B. / Matos, J. C.	Crack tip field in circumferentially-cracked round bar (CCRB) in tension affected by loss of axial symmetry	139-142
Wang, De-Qiang / Zhu, Ming-Liang / Xuan, Fu-Zhen	Crack tip strain evolution and crack closure during overload of a growing fatigue crack	143-148
Berto, F.	Cracked components under anti-plane loading: recent outcomes and future developments	475-483
Sakane, Masao / Itoh, Takamoto	Cracking directions in multiaxial low cycle fatigue at high and room temperatures	16-23
Gallo, P. / Razavi, S. M. J. / Peron, M. / Torgersen, J. / Berto, F.	Creep behavior of V-notched components	456-463
Nurullaev, E. / Ermilov, A. S. / Lyubimova, N. Yu.	Dependence of mechanical characteristics from composition and structure and optimization of mechanical fracture energy of polymer composite material based on high-molecular rubbers	369-377
Kurek, Marta / agoda, Tadeusz	Determination of the critical plane orientation depending on the fatigue curves for bending and torsion	24-30
Funari, Marco Francesco / Greco, Fabrizio / Lonetti, Paolo	Dynamic debonding in layered structures: a coupled ALE-cohesive approach	524-535
Shlyannikov, V. / Tumanov, A.	The effect of creep damage formulation on crack tip fields, creep stress intensity factor and crack growth assessments	285-292
Shlyannikov, V. / Yarullin, R. / Ishtyryakov, I.	Effect of different environmental conditions on surface crack growth in aluminum alloys	31-39
Razavi, S. M. J. / Peron, M. / Torgersen, J. / Berto, F. / Mutignani, F.	Effect of hot dip galvanization on the fatigue strength of steel bolted connections	432-439
Antunes, F. V. / Simões, R. / Branco, R. / Prates, P.	Effect of numerical parameters on plastic CTOD	149-156
Chernyatin, A. S. / Matvienko, Yu. G. / Razumovsky, I. A.	The effect of residual stress on the nonsingular T-stresses	293-298
Carpinteri, Andrea / Spagnoli, Andrea / Vantadori, Sabrina	Effect of spectral cross-correlation on multiaxial fatigue damage: simulations using the critical plane approach	40-44
Morishita, Takahiro / Ogawa, Fumio / Itoh, Takamoto	Evaluation and visualization of multiaxial fatigue behavior under random non-proportional loading condition	45-53
Cruces, A. S. / Lopez-Crespo, P. / Moreno, B. / Lopez-Moreno, A. / Suman, S.	Evaluation of new multiaxial damage parameters on low carbon steel	54-61
Vasco-Olmo, J. M. / Díaz, F. A. / Antunes, F. V. / James, M. N.	Experimental evaluation of CTOD in constant amplitude fatigue crack growth from crack tip displacement fields	157-165
Vasco-Olmo, J. M. / Díaz, F. A. / James, M. N. / Christopher, C. J. / Patterson, E. A.	Experimental methodology for the quantification of crack tip plastic zone and shape from the analysis of displacement fields	166-174
Zhao, Songying / Chen, Lei / Fu, Yan	An experimental study on mechanical properties of fiber-reinforced concrete of energy piles	412-423
Chebat, F. / Cincera, M. / Razavi, S. M. J. / Berto, F. / Welo, T.	Fatigue assessment of steel rollers by means of the local energy	447-455
Mardalizad, Aria / Scazzosi, Riccardo / Manes, Andrea / Giglio, Marco	Four-point bending test on a middle strength rock: numerical and experimental investigations	504-523
Doddamani, Saleemsab / Kaleemulla, Mohamed	Fracture toughness investigations of Al6061-Graphite particulate composite using compact specimens	484-490
Carpinteri, Andrea / Spagnoli, Andrea / Terzano, Michele / Vantadori, Sabrina	Fracture toughness of rough and frictional cracks emanating from a re-entrant corner	175-182
Nadot, Y. / Halm, D. / Dal Cero Coelho, F.	Gradient approach for the evaluation of the fatigue limit of welded structures under complex loading	220-226
Meneghetti, G. / Ricotta, M.	The heat energy dissipated in a control volume to correlate the crack propagation rate in stainless steel specimens	299-306
Klon, J. / Sobek, J. / Malíkova, L. / Seitl, S.	Impact of specific fracture energy investigated in front of the crack tip of three-point bending specimen	183-190
Toribio, J. / Matos, J. C. / González, B.	Influence of crack micro-roughness on the plasticity-induced fatigue propagation in high strength steel	62-65
Cernescu, Anghel	The influence of crack tip shielding on fatigue crack propagation	307-313
Lorenzino, Pablo / Buffiere, Jean-Yves / Verdu, Catherine	Influence of forging conditions on the fatigue mechanisms of low alloy steels: a 3D study	191-196
Carpinteri, Andrea / Fortese, Giovanni / Ronchei, Camilla / Scorza, Daniela / Vantadori, Sabrina / Berto, Filippo	Joined application of a multiaxial critical plane criterion and a strain energy density criterion in low-cycle fatigue	66-70
Nowell, D. / Dragnevski, K. I. / O'Connor, S. J.	Measurement and analysis of fatigue crack deformation at the micro-scale	197-202
Lopez-Crespo, P. / Vazquez-Peralta, J. / Simpson, C. / Buslaps, T. / Withers, P. J.	Mid-thickness studies of the stress intensity factor in the bulk of bainitic steel	203-210
Ferreira, Samuel Elias / Pinho de Castro, Jaime Tupiassú / Meggiolaro, Marco Antonio	A model to quantify fatigue crack growth by cyclic damage accumulation calculated by strip-yield procedures	129-138
Simonova, H. / Vyhlidal, M. / Kucharczyková, B. / Bayer, P. / Keršner, Z. / Malíkova, L. / Klusák, J.	Modelling of interfacial transition zone effect on resistance to crack propagation in fine-grained cement-based composites	211-219
Morishita, Takahiro / Takada, Yuta / Itoh, Takamoto	Multiaxial fatigue property of type 316 stainless steel using hollow cylinder specimen under combined pull loading and inner pressure	71-78
Berto, Filippo / Campagnolo, Alberto / Welo, Torgeir / Vantadori, Sabrina / Carpinteri, Andrea	Multiaxial fatigue strength of titanium alloys	79-89
Razavi, S. M. J. / Peron, M. / Torgersen, J. / Berto, F.	Notched graphite under multiaxial loading	424-431
Sá, M. V. C. / Ferreira, J. L. A. / da Silva, C. R. M. / Araújo, J. A.	Notched multiaxial fatigue of Al7050-T7451: on the need for an equivalent process zone size	90-97
Ortiz González, Julián Andrés / Pinho de Castro, Jaime Tupiassú / Gomez Gonzáles, Giancarlo Luis / Meggiolaro, Marco Antonio / de França Freire, José Luiz	On DIC measurements of DeltaKeff to verify if it is the FCG driving force	227-235
Machado, Verônica Miquelin / Pinho de Castro, Jaime Tupiassú / Meggiolaro, Marco Antonio	On short cracks that depart from elastoplastic notch tips	236-244
Meggiolaro, Marco Antonio / Pinho de Castro, Jaime Tupiassú / Ferreira, Samuel Elias / Wu, Hao	On the applicability of Miner’s rule for multiaxial fatigue life calculations under non-proportional load histories	98-105
Vojtek, Tomas / Zak, Stanislav / Pokluda, Jaroslav	On the connection between mode II and mode III effective thresholds in metals	245-251
Ahmed, Adnan A. / Susmel, Luca	On the use of length scale parameters to assess the static strength of notched 3D-printed PLA	252-259
De Salvo, Roberto Maria	An original method of direct calculation for the identification of the last hinge and the definition of the deformative state at collapse	350-355
Markides, Christos F. / Kourkoulis, Stavros K.	Parametric study of the deformation of transversely isotropic discs under diametral compression	396-411
Sahadi, J. V. / Nowell, D. / Paynter, R. J. H.	Prediction of fatigue crack initiation under biaxial loading	106-113
Tolmacheva (Lyapunova), E. / Davydova, M. / Chudinov, V. / Uvarov, S. / Naimark, O. / Zaytsev, D. / Panfilov, P.	Regularities of fracture pattern formation in alumina ceramics subjected to dynamic indentation	552-561
Yang, Yi / Zheng, Jianlong / Lu, Songtao	Research on differences and correlation between tensile, compression and flexural moduli of cement stabilized macadam	339-349
Li, Zhiyuan / Zhao, Zhiyun	Residual welding stress of I-section members beyond the limits of width-thickness ratio	378-387
Berto, F. / Ayatollahi, M. R. / Vantadori, S. / Carpinteri, A.	Review of the Influence of non-singular higher order terms on the stress field of thin welded lap joints and small inclined cracks in plates	260-268
Vormwald, M. / Shams, E.	Sharp three-dimensional notches under combined nominal normal and shear fatigue loading	114-122
Slámecka, K. / Pokluda, J.	Simple criterion for predicting fatigue life under combined bending and torsion loading	123-128
Beretta, S. / Patriarca, L. / Rabbolini, S.	Stress Intensity Factor calculation from displacement fields	269-276
Patriarca, L. / Luccarelli, P. G. / Foletti, S.	Study of strain localizations in a polycrystalline medium in presence of a quasi-static crack	277-284
Zhang, Luchen / Li, Shuchen / Yan, Qin / Zhu, Lin	Study on the effect of new type liquid accelerator on the performance of shotcrete	356-368
Meggiolaro, Marco Antonio / Pinho de Castro, Jaime Tupiassú / Wu, Hao	A two-step multiaxial racetrack filter algorithm for non-proportional load histories	1-7
Berto, F.	V-notch tip subjected to in-plane mixed mode loading: overview of recent results and possible future outcomes	464-474
Vormwald, Michael / Hos, Yigiter / Freire, José L. F. / Gonzáles, Giancarlo L. G. / Díaz, Jorge G.	Variable mode-mixity during fatigue cycles – crack tip parameters determined from displacement fields measured by digital image correlation	314-322
Seitl, S. / Malíkova, L. / Sobek, J. / Frantík, P. / Lopez-Crespo, P.	Williams expansion-based approximation of the stress field in an Al 2024 body with a crack from optical measurements	323-331

Informations
sur cette fiche
IssueID
37993
Publié(e) le:
24.10.2020
Modifié(e) le:
24.10.2020

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Frattura ed Integrità Strutturale - v. 11, n. 41 (juin 2017)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Frattura ed Integrità Strutturale - v. 11, n. 41 (juin 2017)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.