Frattura ed Integrità Strutturale - v. 12, n. 46 (September 2018)

Published:	September 2018

Author(s)	Title	Page(s)
Rizov, Victor	Analysis of cylindrical delamination cracks in multilayered functionally graded non-linear elastic circular shafts under combined loads	158-177
Ibrahim, Nour Chafak / Boualem, Serier / Belaïd, Mechab	Analysis of the crack-crack interaction effect initiated in aeronautical structures and repaired by composite patch	140-149
Stochino, Flavio / Fadda, Maria Luisa / Mistretta, Fausto	Assessment of RC Bridges integrity by means of low-cost investigations	216-225
Deng, Gang / Nakanishi, Tsutomu	Bending fatigue strength design method for machine components with complex geometries	45-53
yao, yanya	Blending Ratio of Recycled Aggregate on the Performance of Pervious Concrete	343-351
Bellini, Costanzo / Sorrentino, Luca	Characterization of Isogrid Structure in GFRP	319-331
Bazzucchi, Fabio / Restuccia, Luciana / Ferro, Giuseppe	Considerations over the Italian road bridge infrastructure safety after the Polcevera viaduct collapse: past errors and future perspectives	400-421
Tretyakova, Tatyana Viсtorovna / Wildemann, Valery E. / Strungar, Elena M. / Tretyakov, Mikhail P.	Deformation and failure of carbon fiber composite specimens with embedded defects during tension-torsion test	295-305
Hiyoshi, Noritake / Yamashita, Mitsuo / Hokazono, Hiroaki	Effect of Additive Elements Bi/Ni/Ge on Crack Initiation and Propagation for Low-Ag Solders	25-33
El Habiri, Mohamed / Benachour, Mustapha / Benachour, Nadjia	Effect of cold expansion on improving of fatigue initiation life in Aluminium alloy	34-44
Salem, Mokadem / Mohamed, Berrahou / Belaïd, Mechab / Belabbes, Bachir Bouadjra	Effect of the angles of the cracks of corroded plate in bonded composite repair	113-123
Jiang, Shiyong / Cai, Tao / Wu, Shijuan / Yao, Weilai	Experimental Research on the Instantaneous and Long-Term Deflections of Pre-Cracked Concrete Beams Enhanced by Carbon Fibre Reinforced Polymer	275-284
Liu, Jinghong / Xie, Jian / Liu, Yongjian / Shi, Panfei	Experimental study on concrete damage location by Computerized tomography and Acoustic Emission technology	352-360
Hao, Wenxiu / Xu, Xiao / Niu, Zhiqiang	Experimental study on the mechanical behavior of RPC filled square steel tube columns subjected to eccentric compression	391-399
Drosopoulos, Georgios / Motsa, Siphesihle	Failure behaviour of a fire protected steel element	124-139
Puppio, Marco Lucio / Novelli, Sara / Sassu, Mauro	Failure evidences of reduced span bridges in case of extreme rainfalls The case of Livorno	190-202
Lu, Zongjin / Feng, Bill / Loh, Charlie	Fatigue Behaviour and Mean Stress Effect of Thermoplastic Polymers and Composites	150-157
Deliou, Adel / Bouchouicha, Benattou	Fatigue crack propagation in welded joints X70	306-318
Argiento, Luca Umberto / Maione, Alessandra / Casapulla, Claudia	Formulating the in-plane frictional resistances and collapse mechanisms for multi-storey masonry block walls	226-239
wei, song / Liu, Xuesong	High cycle fatigue assessment of steel load-carrying cruciform welded joints: an overview of recent results	94-101
Sedmak, Simon / Camagic, Ivica / Sedmak, Aleksandar / Burzić, Zijah / Aranđelović, Mihajlo	The impact of the temperature and exploitation time on the tensile properties and plain strain fracture toughness, KIc in characteristic areas of welded joint	371-382
Bouchouicha, Benattou / Mekri, H. / Miloudi, A. / Christophe, H. / Imad, A.	Influence of the Coupling between the Mechanical Characteristics and the Welding Conditions by the FSSW Process: Case of the Bimaterial Alu-Steel	62-72
Bharath, K. N. / Manjunatha, G. B.	Investigating the contribution of geometrical parameters and immersion time on fracture toughness of jute fabric composites using statistical techniques	14-24
Shardakov, Igor / Shestakov, Aleksey / Tsvetkov, Roman / Glot, Irina	Investigation of the effect of cracks on the vibration processes in reinforced concrete structures	383-390
Maione, Alessandra / Argiento, Luca Umberto / Casapulla, Claudia / Prota, Andrea	Management of multi-source information to identify the typology of the horizontal structures in historical masonry buildings: the case study of the Museum of Capodimonte in Naples (Italy)	240-251
Tserpes, Konstantinos / Chanteli, A. / Pantelakis, Sp. / Koumoulos, E. P. / Charitidis, C. A.	Mechanical and nanomechanical properties of MWCNT/PP nanocomposite	73-83
Akhavan-Safar, Alireza / Barbosa, Ana Queirós / da Silva, Lucas Filipe Martins / Ayatollahi, Majid Reza	Micro failure analysis of adhesively bonded joints enhanced with natural cork particles: Impact of overlap length and particles volume fraction	266-274
Baltach, Abdelghani / Djebli, Abdelkader / Bendouba, Mostefa / Besseghier, El Hadj / Aid, Abdelkrim	Numerical Analysis and Optimization of the Residual Stresses Distribution Induced by Cold Expansion Technique	252-265
Kostina, Anastasiia / Plekhov, Oleg / Aizikovich, Sergey	Numerical simulation of a heat generation in a layered material during ultrasonic wave propagation	332-342
Giresini, Linda / Sassu, Mauro	An on-site teaching laboratory in a village damaged by the 2009 Abruzzo earthquake	178-189
Nesreddine, sidi Mohamed Medjdoub / Bouadjra, Belabbes Bachir / Abdelkader, Miloudi	Optimization of the geometrical parameters of bonded composite wrap for repairing cracked pipelines	102-112
Sorrentino, Luca / Bellini, Costanzo / Polini, Wilma / Turchetta, Sandro	Performance Index of Natural Stones-GFRP Hybrid Structures	285-294
Mod Yunoh, Mohd Faridz / Abdullah, Shahrum / Md. Saad, Mohamad Hanif / Mohd Nopiah, Zulkifli / Nuawi, Mohd Zaki / Karam Singh, Salvinder Singh	Probabilistic-Based Analysis for Damaging Features of Fatigue Strain Loadings	84-93
Hack, Michael / Carrella-Payan, D. / Magneville, B. / Naito, T. / Urushiyama, Y. / Yamazaki, W. / Yokozeki, T. / Van Paepegem, W.	A progessive damage fatigue model for unidirectional laminated composites based on finite element analysis	54-61
Foti, Dora / Ivorra, Salvador / Diaferio, Mariella / Bru, David / Vacca, Vitantonio	Resonances detected on a historical tower under bells’ forced vibrations	203-215
Taha, Bounini Bousekrine / Benattou, Bouchouicha / Ghazi, Abdelkader	Simulation of the behavior of aluminum alloys welded in Friction Stir Welding FSW	1-13
Zhu, Hua	Stress performance of embedded carbon fiber reinforced plastics plate consolidated reinforced concrete structure	361-370

Author(s)

Title

Page(s)

Rizov, Victor

Analysis of cylindrical delamination cracks in multilayered functionally graded non-linear elastic circular shafts under combined loads

158-177

Ibrahim, Nour Chafak / Boualem, Serier / Belaïd, Mechab

Analysis of the crack-crack interaction effect initiated in aeronautical structures and repaired by composite patch

140-149

Stochino, Flavio / Fadda, Maria Luisa / Mistretta, Fausto

Assessment of RC Bridges integrity by means of low-cost investigations

216-225

Deng, Gang / Nakanishi, Tsutomu

Bending fatigue strength design method for machine components with complex geometries

45-53

yao, yanya

Blending Ratio of Recycled Aggregate on the Performance of Pervious Concrete

343-351

Bellini, Costanzo / Sorrentino, Luca

Characterization of Isogrid Structure in GFRP

319-331

Bazzucchi, Fabio / Restuccia, Luciana / Ferro, Giuseppe

Considerations over the Italian road bridge infrastructure safety after the Polcevera viaduct collapse: past errors and future perspectives

400-421

Tretyakova, Tatyana Viсtorovna / Wildemann, Valery E. / Strungar, Elena M. / Tretyakov, Mikhail P.

Deformation and failure of carbon fiber composite specimens with embedded defects during tension-torsion test

295-305

Hiyoshi, Noritake / Yamashita, Mitsuo / Hokazono, Hiroaki

Effect of Additive Elements Bi/Ni/Ge on Crack Initiation and Propagation for Low-Ag Solders

25-33

El Habiri, Mohamed / Benachour, Mustapha / Benachour, Nadjia

Effect of cold expansion on improving of fatigue initiation life in Aluminium alloy

34-44

Salem, Mokadem / Mohamed, Berrahou / Belaïd, Mechab / Belabbes, Bachir Bouadjra

Effect of the angles of the cracks of corroded plate in bonded composite repair

113-123

Jiang, Shiyong / Cai, Tao / Wu, Shijuan / Yao, Weilai

Experimental Research on the Instantaneous and Long-Term Deflections of Pre-Cracked Concrete Beams Enhanced by Carbon Fibre Reinforced Polymer

275-284

Liu, Jinghong / Xie, Jian / Liu, Yongjian / Shi, Panfei

Experimental study on concrete damage location by Computerized tomography and Acoustic Emission technology

352-360

Hao, Wenxiu / Xu, Xiao / Niu, Zhiqiang

Experimental study on the mechanical behavior of RPC filled square steel tube columns subjected to eccentric compression

391-399

Drosopoulos, Georgios / Motsa, Siphesihle

Failure behaviour of a fire protected steel element

124-139

Puppio, Marco Lucio / Novelli, Sara / Sassu, Mauro

Failure evidences of reduced span bridges in case of extreme rainfalls The case of Livorno

190-202

Lu, Zongjin / Feng, Bill / Loh, Charlie

Fatigue Behaviour and Mean Stress Effect of Thermoplastic Polymers and Composites

150-157

Deliou, Adel / Bouchouicha, Benattou

Fatigue crack propagation in welded joints X70

306-318

Argiento, Luca Umberto / Maione, Alessandra / Casapulla, Claudia

Formulating the in-plane frictional resistances and collapse mechanisms for multi-storey masonry block walls

226-239

wei, song / Liu, Xuesong

High cycle fatigue assessment of steel load-carrying cruciform welded joints: an overview of recent results

94-101

Sedmak, Simon / Camagic, Ivica / Sedmak, Aleksandar / Burzić, Zijah / Aranđelović, Mihajlo

The impact of the temperature and exploitation time on the tensile properties and plain strain fracture toughness, KIc in characteristic areas of welded joint

371-382

Bouchouicha, Benattou / Mekri, H. / Miloudi, A. / Christophe, H. / Imad, A.

Influence of the Coupling between the Mechanical Characteristics and the Welding Conditions by the FSSW Process: Case of the Bimaterial Alu-Steel

62-72

Bharath, K. N. / Manjunatha, G. B.

Investigating the contribution of geometrical parameters and immersion time on fracture toughness of jute fabric composites using statistical techniques

14-24

Shardakov, Igor / Shestakov, Aleksey / Tsvetkov, Roman / Glot, Irina

Investigation of the effect of cracks on the vibration processes in reinforced concrete structures

383-390

Maione, Alessandra / Argiento, Luca Umberto / Casapulla, Claudia / Prota, Andrea

Management of multi-source information to identify the typology of the horizontal structures in historical masonry buildings: the case study of the Museum of Capodimonte in Naples (Italy)

240-251

Tserpes, Konstantinos / Chanteli, A. / Pantelakis, Sp. / Koumoulos, E. P. / Charitidis, C. A.

Mechanical and nanomechanical properties of MWCNT/PP nanocomposite

73-83

Akhavan-Safar, Alireza / Barbosa, Ana Queirós / da Silva, Lucas Filipe Martins / Ayatollahi, Majid Reza

Micro failure analysis of adhesively bonded joints enhanced with natural cork particles: Impact of overlap length and particles volume fraction

266-274

Baltach, Abdelghani / Djebli, Abdelkader / Bendouba, Mostefa / Besseghier, El Hadj / Aid, Abdelkrim

Numerical Analysis and Optimization of the Residual Stresses Distribution Induced by Cold Expansion Technique

252-265

Kostina, Anastasiia / Plekhov, Oleg / Aizikovich, Sergey

Numerical simulation of a heat generation in a layered material during ultrasonic wave propagation

332-342

Giresini, Linda / Sassu, Mauro

An on-site teaching laboratory in a village damaged by the 2009 Abruzzo earthquake

178-189

Nesreddine, sidi Mohamed Medjdoub / Bouadjra, Belabbes Bachir / Abdelkader, Miloudi

Optimization of the geometrical parameters of bonded composite wrap for repairing cracked pipelines

102-112

Sorrentino, Luca / Bellini, Costanzo / Polini, Wilma / Turchetta, Sandro

Performance Index of Natural Stones-GFRP Hybrid Structures

285-294

Mod Yunoh, Mohd Faridz / Abdullah, Shahrum / Md. Saad, Mohamad Hanif / Mohd Nopiah, Zulkifli / Nuawi, Mohd Zaki / Karam Singh, Salvinder Singh

Probabilistic-Based Analysis for Damaging Features of Fatigue Strain Loadings

84-93

Hack, Michael / Carrella-Payan, D. / Magneville, B. / Naito, T. / Urushiyama, Y. / Yamazaki, W. / Yokozeki, T. / Van Paepegem, W.

A progessive damage fatigue model for unidirectional laminated composites based on finite element analysis

54-61

Foti, Dora / Ivorra, Salvador / Diaferio, Mariella / Bru, David / Vacca, Vitantonio

Resonances detected on a historical tower under bells’ forced vibrations

203-215

Taha, Bounini Bousekrine / Benattou, Bouchouicha / Ghazi, Abdelkader

Simulation of the behavior of aluminum alloys welded in Friction Stir Welding FSW

1-13

Zhu, Hua

Stress performance of embedded carbon fiber reinforced plastics plate consolidated reinforced concrete structure

361-370

Advertisement

Frattura ed Integrità Strutturale - v. 12, n. 46 (September 2018)

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Frattura ed Integrità Strutturale - v. 12, n. 46 (September 2018)

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.