Frattura ed Integrità Strutturale - v. 12, n. 46 (septembre 2018)

Publié:	septembre 2018

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Rizov, Victor	Analysis of cylindrical delamination cracks in multilayered functionally graded non-linear elastic circular shafts under combined loads	158-177
Ibrahim, Nour Chafak / Boualem, Serier / Belaïd, Mechab	Analysis of the crack-crack interaction effect initiated in aeronautical structures and repaired by composite patch	140-149
Stochino, Flavio / Fadda, Maria Luisa / Mistretta, Fausto	Assessment of RC Bridges integrity by means of low-cost investigations	216-225
Deng, Gang / Nakanishi, Tsutomu	Bending fatigue strength design method for machine components with complex geometries	45-53
yao, yanya	Blending Ratio of Recycled Aggregate on the Performance of Pervious Concrete	343-351
Bellini, Costanzo / Sorrentino, Luca	Characterization of Isogrid Structure in GFRP	319-331
Bazzucchi, Fabio / Restuccia, Luciana / Ferro, Giuseppe	Considerations over the Italian road bridge infrastructure safety after the Polcevera viaduct collapse: past errors and future perspectives	400-421
Tretyakova, Tatyana Viсtorovna / Wildemann, Valery E. / Strungar, Elena M. / Tretyakov, Mikhail P.	Deformation and failure of carbon fiber composite specimens with embedded defects during tension-torsion test	295-305
Hiyoshi, Noritake / Yamashita, Mitsuo / Hokazono, Hiroaki	Effect of Additive Elements Bi/Ni/Ge on Crack Initiation and Propagation for Low-Ag Solders	25-33
El Habiri, Mohamed / Benachour, Mustapha / Benachour, Nadjia	Effect of cold expansion on improving of fatigue initiation life in Aluminium alloy	34-44
Salem, Mokadem / Mohamed, Berrahou / Belaïd, Mechab / Belabbes, Bachir Bouadjra	Effect of the angles of the cracks of corroded plate in bonded composite repair	113-123
Jiang, Shiyong / Cai, Tao / Wu, Shijuan / Yao, Weilai	Experimental Research on the Instantaneous and Long-Term Deflections of Pre-Cracked Concrete Beams Enhanced by Carbon Fibre Reinforced Polymer	275-284
Liu, Jinghong / Xie, Jian / Liu, Yongjian / Shi, Panfei	Experimental study on concrete damage location by Computerized tomography and Acoustic Emission technology	352-360
Hao, Wenxiu / Xu, Xiao / Niu, Zhiqiang	Experimental study on the mechanical behavior of RPC filled square steel tube columns subjected to eccentric compression	391-399
Drosopoulos, Georgios / Motsa, Siphesihle	Failure behaviour of a fire protected steel element	124-139
Puppio, Marco Lucio / Novelli, Sara / Sassu, Mauro	Failure evidences of reduced span bridges in case of extreme rainfalls The case of Livorno	190-202
Lu, Zongjin / Feng, Bill / Loh, Charlie	Fatigue Behaviour and Mean Stress Effect of Thermoplastic Polymers and Composites	150-157
Deliou, Adel / Bouchouicha, Benattou	Fatigue crack propagation in welded joints X70	306-318
Argiento, Luca Umberto / Maione, Alessandra / Casapulla, Claudia	Formulating the in-plane frictional resistances and collapse mechanisms for multi-storey masonry block walls	226-239
wei, song / Liu, Xuesong	High cycle fatigue assessment of steel load-carrying cruciform welded joints: an overview of recent results	94-101
Sedmak, Simon / Camagic, Ivica / Sedmak, Aleksandar / Burzić, Zijah / Aranđelović, Mihajlo	The impact of the temperature and exploitation time on the tensile properties and plain strain fracture toughness, KIc in characteristic areas of welded joint	371-382
Bouchouicha, Benattou / Mekri, H. / Miloudi, A. / Christophe, H. / Imad, A.	Influence of the Coupling between the Mechanical Characteristics and the Welding Conditions by the FSSW Process: Case of the Bimaterial Alu-Steel	62-72
Bharath, K. N. / Manjunatha, G. B.	Investigating the contribution of geometrical parameters and immersion time on fracture toughness of jute fabric composites using statistical techniques	14-24
Shardakov, Igor / Shestakov, Aleksey / Tsvetkov, Roman / Glot, Irina	Investigation of the effect of cracks on the vibration processes in reinforced concrete structures	383-390
Maione, Alessandra / Argiento, Luca Umberto / Casapulla, Claudia / Prota, Andrea	Management of multi-source information to identify the typology of the horizontal structures in historical masonry buildings: the case study of the Museum of Capodimonte in Naples (Italy)	240-251
Tserpes, Konstantinos / Chanteli, A. / Pantelakis, Sp. / Koumoulos, E. P. / Charitidis, C. A.	Mechanical and nanomechanical properties of MWCNT/PP nanocomposite	73-83
Akhavan-Safar, Alireza / Barbosa, Ana Queirós / da Silva, Lucas Filipe Martins / Ayatollahi, Majid Reza	Micro failure analysis of adhesively bonded joints enhanced with natural cork particles: Impact of overlap length and particles volume fraction	266-274
Baltach, Abdelghani / Djebli, Abdelkader / Bendouba, Mostefa / Besseghier, El Hadj / Aid, Abdelkrim	Numerical Analysis and Optimization of the Residual Stresses Distribution Induced by Cold Expansion Technique	252-265
Kostina, Anastasiia / Plekhov, Oleg / Aizikovich, Sergey	Numerical simulation of a heat generation in a layered material during ultrasonic wave propagation	332-342
Giresini, Linda / Sassu, Mauro	An on-site teaching laboratory in a village damaged by the 2009 Abruzzo earthquake	178-189
Nesreddine, sidi Mohamed Medjdoub / Bouadjra, Belabbes Bachir / Abdelkader, Miloudi	Optimization of the geometrical parameters of bonded composite wrap for repairing cracked pipelines	102-112
Sorrentino, Luca / Bellini, Costanzo / Polini, Wilma / Turchetta, Sandro	Performance Index of Natural Stones-GFRP Hybrid Structures	285-294
Mod Yunoh, Mohd Faridz / Abdullah, Shahrum / Md. Saad, Mohamad Hanif / Mohd Nopiah, Zulkifli / Nuawi, Mohd Zaki / Karam Singh, Salvinder Singh	Probabilistic-Based Analysis for Damaging Features of Fatigue Strain Loadings	84-93
Hack, Michael / Carrella-Payan, D. / Magneville, B. / Naito, T. / Urushiyama, Y. / Yamazaki, W. / Yokozeki, T. / Van Paepegem, W.	A progessive damage fatigue model for unidirectional laminated composites based on finite element analysis	54-61
Foti, Dora / Ivorra, Salvador / Diaferio, Mariella / Bru, David / Vacca, Vitantonio	Resonances detected on a historical tower under bells’ forced vibrations	203-215
Taha, Bounini Bousekrine / Benattou, Bouchouicha / Ghazi, Abdelkader	Simulation of the behavior of aluminum alloys welded in Friction Stir Welding FSW	1-13
Zhu, Hua	Stress performance of embedded carbon fiber reinforced plastics plate consolidated reinforced concrete structure	361-370

Informations
sur cette fiche
IssueID
37988
Publié(e) le:
24.10.2020
Modifié(e) le:
24.10.2020

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Frattura ed Integrità Strutturale - v. 12, n. 46 (septembre 2018)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Frattura ed Integrità Strutturale - v. 12, n. 46 (septembre 2018)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.