Frattura ed Integrità Strutturale - v. 13, n. 47 (December 2018)

Published:	December 2018

Author(s)	Title	Page(s)
Benasciutti, Denis / Zanellati, Davide / Cristofori, Alessandro	The "Projection-by-Projection" (PbP) criterion for multiaxial random fatigue loadings	348-366
Rigon, Daniele / Ricotta, Mauro / Meneghetti, Giovanni	Analysis of dissipated energy and temperature fields at severe notches of AISI 304L stainless steel specimens	334-347
Kourkoulis, Stavros / Pasiou, Ermioni / Markides, Christos	Analytical and numerical study of the stress field in a circular semi- ring under combined diametral compression and bending	247-265
Peron, Mirco / Torgersen, Jan / Berto, Filippo	Assessment of tensile and fatigue behavior of PEEK in a physiologically relevant environment	425-436
Kawbata, Tomoya / Nakamura, Noritaka / Aihara, Shuji	Brittle crack propagation acceleration in a single crystal of a 3% silicon-Fe alloy	416-424
Alecci, Valerio / De Stefano, Mario	Building irregularity issues and architectural design in seismic areas	161-168
Pirondi, Alessandro / Moroni, Fabrizio / Pernechele, Chiara / Gaita, Arturo / Vescovi, Luca	Comparison of tensile strength and fracture toughness under mode I and II loading of co-cured and co-bonded CFRP joints	294-302
Cucinotta, Filippo / Neri, Paolo / Sfravara, Felice / Razionale, Armando	Composite sandwich impact response: experimental and numerical analysis	367-382
Gkoumas, Konstantinos / Bontempi, Franco	Development of a piezoelectric energy-harvesting sensor: from concept to reality	150-160
Fincato, Riccardo / Tsutsumi, Seiichiro / Momii, Hideto	Ductile damage evolution law for proportional and non-proportional loading conditions	231-246
Matvienko, Yury / Pisarev, Vladimir / Eleonsky, Svyatoslav	The effect of low-cycle fatigue on evolution of fracture mechanics parameters in residual stress field caused by cold hole expansion	303-320
Manaia, Joao / Jesus, Abílio / Pires, Francisco	Elastoplastic and fracture behaviour of semi-crystalline polymers under multiaxial stress states	82-103
Gallo, Pasquale / Sumigawa, Takashi / Kitamura, Takayuki	Experimental characterization at nanoscale of single crystal silicon fracture toughness	408-415
Spagnoli, Andrea / Cendon Franco, David / D'Angelo, Antonio	Experimental Investigation on the Fracture Behaviour of Natural Stones Exposed to Monotonic and Cyclic Loading	394-400
Han, Zhongying / Cheng, Yuanfang / Li, Xue-Liang / Yan, Chuan-liang	Experimental study on shale fracturing assisted by low-temperature freezing	74-81
Foti, Pietro / Berto, Filippo / Filippi, Stefano	Fatigue assessment of welded joints by means of the Strain Energy Density method: Numerical predictions and comparison with Eurocode 3	104-125
Mele, Elena / Fraldi, Massimiliano / Montuori, Gian Maria / Perrella, Gianpaolo / della vista, vincenzo	Hexagrid-Voronoi transition in structural patterns for tall buildings	186-208
Fallah Tafti, Mehdi / Hoseini Aqda, Seyyed Abuzar / Motamedi, Hamed	The impacts of type and proportion of five different asphalt modifiers on the low temperature fracture toughness and fracture energy of modified HMA	169-185
Rizov, Victor	Influence of material inhomogeneity and non-linear mechanical behavior of the material on delamination in multilayered beams	468-481
Bressan, Stefano / Ogawa, Fumio / Itoh, Takamoto / Berto, Filippo	Influence of Notch Sensitivity and Crack Initiation Site on Low Cycle Fatigue Life of Notched Components under Multiaxial Non-proportional Loading	126-140
Marsavina, Liviu / Pop, Ion / Linul, Emanoil	Mechanical and fracture properties of particleboard	266-276
kaddour, Hachellaf / Hadj Miloud, Meddah / El Bahri, Ould Chikh / Abdallah, Lounis	Mechanical Behavior Analysis of a Friction Stir Welding (FSW) for Welded Joint Applied to Polymer Materials	459-467
Akbari, S. / Nabavi, S. M. / Moayeri, H.	Novel weight functions and stress intensity factors for quarterelliptical cracks in lug attachments	39-53
Elmeguenni, Imane / Mazari, Mohamed	Numerical Investigation on Stress Intensity Factor and J Integral in Friction Stir Welded Joint through XFEM method	54-64
Funari, Marco / Greco, Fabrizio / Lonetti, Paolo / Spadea, Saverio	A numerical model based on ALE formulation to predict crack propagation in sandwich structures	277-293
Ferro, Paolo / Berto, Filippo / Bonollo, Franco / Montanari, Roberto	Numerical modelling of residual stress redistribution induced by TIG-dressing	221-230
Li, Shuchen / Zhang, Luchen / Sun, Qian / Tengfei, Ma	Numerical Simulation Method Study of Rock Fracture Based on Strain Energy Density Theory	1-16
Ahmed, Bensari / El Bahri, Ould Chikh / Benattou, Bouchouicha / Malika, Tirenifi	Numerical Simulation of a Steel Weld Joint and Fracture Mechanics Study of a Compact Tension Specimen for Zones of Weld Joint	17-29
Grande, Ernesto / Imbimbo, Maura / Marfia, Sonia / Sacco, Elio	Numerical simulation of the de-bonding phenomenon of FRCM strengthening systems	321-333
adel, CHouiter / Benzerga, D. D. / Haddi, A. / Tamine, T.	Prediction of Cycle Life of Expansion Bellows for Fixed Tube sheet Heat Exchanger	30-38
Marchelli, Maddalena / De Biagi, Valerio / Peila, Daniele	A quick-assessment procedure to evaluate the degree of conservation of rockfall drapery meshes	437-450
Olmati, Pierluigi / Gkoumas, Konstantinos / Bontempi, Franco	Simplified FEM modelling for the collapse assessment of a masonry vault	141-149
Spagnoli, Andrea / Carpinteri, Andrea / Terzano, Michele	Size effect on the fracture resistance of rough and frictional cracks	401-407
Susmel, Luca / Berto, Filippo / Hu, Zheng	The Strain energy density to estimate lifetime of notched components subjected to variable amplitude fatigue loading	383-393
Mizuno, Yusuke / Kubota, Yoshiaki	Structural Form of Bridges Reflecting the Construction Processes	209-220
Lu, Xirui / Yuan, Chen / Junsen, Zeng / Qijun, Hu / Dadong, Shao / Haibin, Zhang / Xirui, Lu	The thermal damaging process of diorite under microwave irradiation	65-73
Namdar, Abdoullah / Dong, Yun / Liu, Yuyi	Timber beam seismic design – A numerical simulation	451-458

Author(s)

Title

Page(s)

Benasciutti, Denis / Zanellati, Davide / Cristofori, Alessandro

The "Projection-by-Projection" (PbP) criterion for multiaxial random fatigue loadings

348-366

Rigon, Daniele / Ricotta, Mauro / Meneghetti, Giovanni

Analysis of dissipated energy and temperature fields at severe notches of AISI 304L stainless steel specimens

334-347

Kourkoulis, Stavros / Pasiou, Ermioni / Markides, Christos

Analytical and numerical study of the stress field in a circular semi- ring under combined diametral compression and bending

247-265

Peron, Mirco / Torgersen, Jan / Berto, Filippo

Assessment of tensile and fatigue behavior of PEEK in a physiologically relevant environment

425-436

Kawbata, Tomoya / Nakamura, Noritaka / Aihara, Shuji

Brittle crack propagation acceleration in a single crystal of a 3% silicon-Fe alloy

416-424

Alecci, Valerio / De Stefano, Mario

Building irregularity issues and architectural design in seismic areas

161-168

Pirondi, Alessandro / Moroni, Fabrizio / Pernechele, Chiara / Gaita, Arturo / Vescovi, Luca

Comparison of tensile strength and fracture toughness under mode I and II loading of co-cured and co-bonded CFRP joints

294-302

Cucinotta, Filippo / Neri, Paolo / Sfravara, Felice / Razionale, Armando

Composite sandwich impact response: experimental and numerical analysis

367-382

Gkoumas, Konstantinos / Bontempi, Franco

Development of a piezoelectric energy-harvesting sensor: from concept to reality

150-160

Fincato, Riccardo / Tsutsumi, Seiichiro / Momii, Hideto

Ductile damage evolution law for proportional and non-proportional loading conditions

231-246

Matvienko, Yury / Pisarev, Vladimir / Eleonsky, Svyatoslav

The effect of low-cycle fatigue on evolution of fracture mechanics parameters in residual stress field caused by cold hole expansion

303-320

Manaia, Joao / Jesus, Abílio / Pires, Francisco

Elastoplastic and fracture behaviour of semi-crystalline polymers under multiaxial stress states

82-103

Gallo, Pasquale / Sumigawa, Takashi / Kitamura, Takayuki

Experimental characterization at nanoscale of single crystal silicon fracture toughness

408-415

Spagnoli, Andrea / Cendon Franco, David / D'Angelo, Antonio

Experimental Investigation on the Fracture Behaviour of Natural Stones Exposed to Monotonic and Cyclic Loading

394-400

Han, Zhongying / Cheng, Yuanfang / Li, Xue-Liang / Yan, Chuan-liang

Experimental study on shale fracturing assisted by low-temperature freezing

74-81

Foti, Pietro / Berto, Filippo / Filippi, Stefano

Fatigue assessment of welded joints by means of the Strain Energy Density method: Numerical predictions and comparison with Eurocode 3

104-125

Mele, Elena / Fraldi, Massimiliano / Montuori, Gian Maria / Perrella, Gianpaolo / della vista, vincenzo

Hexagrid-Voronoi transition in structural patterns for tall buildings

186-208

Fallah Tafti, Mehdi / Hoseini Aqda, Seyyed Abuzar / Motamedi, Hamed

The impacts of type and proportion of five different asphalt modifiers on the low temperature fracture toughness and fracture energy of modified HMA

169-185

Rizov, Victor

Influence of material inhomogeneity and non-linear mechanical behavior of the material on delamination in multilayered beams

468-481

Bressan, Stefano / Ogawa, Fumio / Itoh, Takamoto / Berto, Filippo

Influence of Notch Sensitivity and Crack Initiation Site on Low Cycle Fatigue Life of Notched Components under Multiaxial Non-proportional Loading

126-140

Marsavina, Liviu / Pop, Ion / Linul, Emanoil

Mechanical and fracture properties of particleboard

266-276

kaddour, Hachellaf / Hadj Miloud, Meddah / El Bahri, Ould Chikh / Abdallah, Lounis

Mechanical Behavior Analysis of a Friction Stir Welding (FSW) for Welded Joint Applied to Polymer Materials

459-467

Akbari, S. / Nabavi, S. M. / Moayeri, H.

Novel weight functions and stress intensity factors for quarterelliptical cracks in lug attachments

39-53

Elmeguenni, Imane / Mazari, Mohamed

Numerical Investigation on Stress Intensity Factor and J Integral in Friction Stir Welded Joint through XFEM method

54-64

Funari, Marco / Greco, Fabrizio / Lonetti, Paolo / Spadea, Saverio

A numerical model based on ALE formulation to predict crack propagation in sandwich structures

277-293

Ferro, Paolo / Berto, Filippo / Bonollo, Franco / Montanari, Roberto

Numerical modelling of residual stress redistribution induced by TIG-dressing

221-230

Li, Shuchen / Zhang, Luchen / Sun, Qian / Tengfei, Ma

Numerical Simulation Method Study of Rock Fracture Based on Strain Energy Density Theory

1-16

Ahmed, Bensari / El Bahri, Ould Chikh / Benattou, Bouchouicha / Malika, Tirenifi

Numerical Simulation of a Steel Weld Joint and Fracture Mechanics Study of a Compact Tension Specimen for Zones of Weld Joint

17-29

Grande, Ernesto / Imbimbo, Maura / Marfia, Sonia / Sacco, Elio

Numerical simulation of the de-bonding phenomenon of FRCM strengthening systems

321-333

adel, CHouiter / Benzerga, D. D. / Haddi, A. / Tamine, T.

Prediction of Cycle Life of Expansion Bellows for Fixed Tube sheet Heat Exchanger

30-38

Marchelli, Maddalena / De Biagi, Valerio / Peila, Daniele

A quick-assessment procedure to evaluate the degree of conservation of rockfall drapery meshes

437-450

Olmati, Pierluigi / Gkoumas, Konstantinos / Bontempi, Franco

Simplified FEM modelling for the collapse assessment of a masonry vault

141-149

Spagnoli, Andrea / Carpinteri, Andrea / Terzano, Michele

Size effect on the fracture resistance of rough and frictional cracks

401-407

Susmel, Luca / Berto, Filippo / Hu, Zheng

The Strain energy density to estimate lifetime of notched components subjected to variable amplitude fatigue loading

383-393

Mizuno, Yusuke / Kubota, Yoshiaki

Structural Form of Bridges Reflecting the Construction Processes

209-220

Lu, Xirui / Yuan, Chen / Junsen, Zeng / Qijun, Hu / Dadong, Shao / Haibin, Zhang / Xirui, Lu

The thermal damaging process of diorite under microwave irradiation

65-73

Namdar, Abdoullah / Dong, Yun / Liu, Yuyi

Timber beam seismic design – A numerical simulation

451-458

Advertisement

Frattura ed Integrità Strutturale - v. 13, n. 47 (December 2018)

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Frattura ed Integrità Strutturale - v. 13, n. 47 (December 2018)

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.