Frattura ed Integrità Strutturale - v. 13, n. 47 (Dezember 2018)

Erschienen:	Dezember 2018

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Benasciutti, Denis / Zanellati, Davide / Cristofori, Alessandro	The "Projection-by-Projection" (PbP) criterion for multiaxial random fatigue loadings	348-366
Rigon, Daniele / Ricotta, Mauro / Meneghetti, Giovanni	Analysis of dissipated energy and temperature fields at severe notches of AISI 304L stainless steel specimens	334-347
Kourkoulis, Stavros / Pasiou, Ermioni / Markides, Christos	Analytical and numerical study of the stress field in a circular semi- ring under combined diametral compression and bending	247-265
Peron, Mirco / Torgersen, Jan / Berto, Filippo	Assessment of tensile and fatigue behavior of PEEK in a physiologically relevant environment	425-436
Kawbata, Tomoya / Nakamura, Noritaka / Aihara, Shuji	Brittle crack propagation acceleration in a single crystal of a 3% silicon-Fe alloy	416-424
Alecci, Valerio / De Stefano, Mario	Building irregularity issues and architectural design in seismic areas	161-168
Pirondi, Alessandro / Moroni, Fabrizio / Pernechele, Chiara / Gaita, Arturo / Vescovi, Luca	Comparison of tensile strength and fracture toughness under mode I and II loading of co-cured and co-bonded CFRP joints	294-302
Cucinotta, Filippo / Neri, Paolo / Sfravara, Felice / Razionale, Armando	Composite sandwich impact response: experimental and numerical analysis	367-382
Gkoumas, Konstantinos / Bontempi, Franco	Development of a piezoelectric energy-harvesting sensor: from concept to reality	150-160
Fincato, Riccardo / Tsutsumi, Seiichiro / Momii, Hideto	Ductile damage evolution law for proportional and non-proportional loading conditions	231-246
Matvienko, Yury / Pisarev, Vladimir / Eleonsky, Svyatoslav	The effect of low-cycle fatigue on evolution of fracture mechanics parameters in residual stress field caused by cold hole expansion	303-320
Manaia, Joao / Jesus, Abílio / Pires, Francisco	Elastoplastic and fracture behaviour of semi-crystalline polymers under multiaxial stress states	82-103
Gallo, Pasquale / Sumigawa, Takashi / Kitamura, Takayuki	Experimental characterization at nanoscale of single crystal silicon fracture toughness	408-415
Spagnoli, Andrea / Cendon Franco, David / D'Angelo, Antonio	Experimental Investigation on the Fracture Behaviour of Natural Stones Exposed to Monotonic and Cyclic Loading	394-400
Han, Zhongying / Cheng, Yuanfang / Li, Xue-Liang / Yan, Chuan-liang	Experimental study on shale fracturing assisted by low-temperature freezing	74-81
Foti, Pietro / Berto, Filippo / Filippi, Stefano	Fatigue assessment of welded joints by means of the Strain Energy Density method: Numerical predictions and comparison with Eurocode 3	104-125
Mele, Elena / Fraldi, Massimiliano / Montuori, Gian Maria / Perrella, Gianpaolo / della vista, vincenzo	Hexagrid-Voronoi transition in structural patterns for tall buildings	186-208
Fallah Tafti, Mehdi / Hoseini Aqda, Seyyed Abuzar / Motamedi, Hamed	The impacts of type and proportion of five different asphalt modifiers on the low temperature fracture toughness and fracture energy of modified HMA	169-185
Rizov, Victor	Influence of material inhomogeneity and non-linear mechanical behavior of the material on delamination in multilayered beams	468-481
Bressan, Stefano / Ogawa, Fumio / Itoh, Takamoto / Berto, Filippo	Influence of Notch Sensitivity and Crack Initiation Site on Low Cycle Fatigue Life of Notched Components under Multiaxial Non-proportional Loading	126-140
Marsavina, Liviu / Pop, Ion / Linul, Emanoil	Mechanical and fracture properties of particleboard	266-276
kaddour, Hachellaf / Hadj Miloud, Meddah / El Bahri, Ould Chikh / Abdallah, Lounis	Mechanical Behavior Analysis of a Friction Stir Welding (FSW) for Welded Joint Applied to Polymer Materials	459-467
Akbari, S. / Nabavi, S. M. / Moayeri, H.	Novel weight functions and stress intensity factors for quarterelliptical cracks in lug attachments	39-53
Elmeguenni, Imane / Mazari, Mohamed	Numerical Investigation on Stress Intensity Factor and J Integral in Friction Stir Welded Joint through XFEM method	54-64
Funari, Marco / Greco, Fabrizio / Lonetti, Paolo / Spadea, Saverio	A numerical model based on ALE formulation to predict crack propagation in sandwich structures	277-293
Ferro, Paolo / Berto, Filippo / Bonollo, Franco / Montanari, Roberto	Numerical modelling of residual stress redistribution induced by TIG-dressing	221-230
Li, Shuchen / Zhang, Luchen / Sun, Qian / Tengfei, Ma	Numerical Simulation Method Study of Rock Fracture Based on Strain Energy Density Theory	1-16
Ahmed, Bensari / El Bahri, Ould Chikh / Benattou, Bouchouicha / Malika, Tirenifi	Numerical Simulation of a Steel Weld Joint and Fracture Mechanics Study of a Compact Tension Specimen for Zones of Weld Joint	17-29
Grande, Ernesto / Imbimbo, Maura / Marfia, Sonia / Sacco, Elio	Numerical simulation of the de-bonding phenomenon of FRCM strengthening systems	321-333
adel, CHouiter / Benzerga, D. D. / Haddi, A. / Tamine, T.	Prediction of Cycle Life of Expansion Bellows for Fixed Tube sheet Heat Exchanger	30-38
Marchelli, Maddalena / De Biagi, Valerio / Peila, Daniele	A quick-assessment procedure to evaluate the degree of conservation of rockfall drapery meshes	437-450
Olmati, Pierluigi / Gkoumas, Konstantinos / Bontempi, Franco	Simplified FEM modelling for the collapse assessment of a masonry vault	141-149
Spagnoli, Andrea / Carpinteri, Andrea / Terzano, Michele	Size effect on the fracture resistance of rough and frictional cracks	401-407
Susmel, Luca / Berto, Filippo / Hu, Zheng	The Strain energy density to estimate lifetime of notched components subjected to variable amplitude fatigue loading	383-393
Mizuno, Yusuke / Kubota, Yoshiaki	Structural Form of Bridges Reflecting the Construction Processes	209-220
Lu, Xirui / Yuan, Chen / Junsen, Zeng / Qijun, Hu / Dadong, Shao / Haibin, Zhang / Xirui, Lu	The thermal damaging process of diorite under microwave irradiation	65-73
Namdar, Abdoullah / Dong, Yun / Liu, Yuyi	Timber beam seismic design – A numerical simulation	451-458

Über diese
Datenseite
IssueID
37987
Veröffentlicht am:
24.10.2020
Geändert am:
24.10.2020

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Frattura ed Integrità Strutturale - v. 13, n. 47 (Dezember 2018)

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Frattura ed Integrità Strutturale - v. 13, n. 47 (Dezember 2018)

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.