Frattura ed Integrità Strutturale - v. 13, n. 48 (March 2019)

Published:	March 2019

Articles in this Issue

Author(s)	Title	Page(s)
Baptista, Ricardo / Infante, Virginia / Marques, Joao	Algorithm for automatic fatigue crack growth simulation on welded high strength steels	257-268
Nagaral, Madeva / Nayak, Prasad / Srinivas, H. K. / Auradi, V.	Characterization and Tensile Fractography of Nano ZrO2 Reinforced Copper-Zinc Alloy Composites	370-376
Patil, Hiralal / Patel, D. / Patil, C.	Characterizations of TIG welded joints of Unalloyed Commercially Pure Titanium Gr-2 for Weld Process Parameters	377-384
Berardi, Valentino / Perrella, Michele / Cricrì, Gabriele	Cohesive fracture in composite systems: experimental setup and first results	222-229
Christopher, J. / Praveen, C. / Choudhary, B. K.	Comparative evaluation of two physically based models for the description of stress-relaxation behaviour of 9% chromium containing steel	554-562
Barbosa, Joelton / Correia, José A. F. O. / Montenegro, Pedro / Júnior, Raimundo / Lesiuk, Grzegorz / de Jesús, Abílio / Calçada, Rui	A comparison between S-N Logistic and Kohout-Věchet formulations applied to the fatigue data of old metallic bridges materials	400-410
Maiorana, Emanuele	Contribution of longitudinal stiffener rigidity and position to bridge girder integrity	459-472
Zakharov, Alexander / Shlyannikov, Valery / Tumanov, Andrey	The crack path in fuselage panel under mixed mode biaxial loading	87-96
Brighenti, Roberto / Carpinteri, Andrea / Artoni, Federico	Crack paths in soft thin sheets	1-9
Malikova, Lucie / Razavi, Seyed / Berto, Filippo	Crack propagation in a brittle DCB specimen assessed by means of the Williams’ power expansion	34-41
Henkel, Sebastian / Wolf, Carl / Biermann, Horst / Burgold, Andreas / Kuna, Meinhard	Cruciform specimens used for determination of the influence of T-stress on fatigue crack growth with overloads on aluminum alloy Al 6061 T651	135-143
Silva, Ramon / Palechor, Erwin U. L. / Bezerra, Luciano M. / de Morais, Marcus V. G. / da Silva, Welington V.	Damage detection in a reinforced concrete bridge applying wavelet transform in experimental and numerical data	693-705
Reis, Luis / Caxias, Joao / Soares, Henrique / Costa, Pedro / Anes, Vitor / Freitas, Manuel	Damage evaluation under complex fatigue loading conditions	318-331
Wang, Xiaochuan / Yang, Delei	Damage evolution law on the surface field of argillaceous dolomite based on Brazilian test and 3D digital image correlation	144-151
Prawin, J. / Rama Mohan Rao, A.	Damage localization of closing cracks using a signal decomposition technique	513-522
Bär, Jürgen / Urbanek, Ralf	Determination of dissipated Energy in Fatigue Crack Propagation Experiments with Lock-In Thermography	563-570
Maciel, Ricardo / Infante, Virginia / Braga, Daniel / Moreira, Pedro / Bento, Tiago / Da Silva, Lucas	Development of hybrid friction stir welding and adhesive bonding single lap joints in aluminium alloys	269-285
Huang, Xiaoguang / Wang, Zhiqiang	Durability method on corrosion fatigue performance of AH 32 steel	481-490
Dhaka, Pankaj / Prakash, Raghu	Effect of Contact Geometry on the Contact Stresses in a Flat with Round Edge Contact	630-638
Metehri, Aicha / Kouider, Madani / Lousdad, Abdelkader	Effect of crack position and loading conditions on SIF in SiC particles reinforced Al composite	152-160
Shlyannikov, Valery / Tumanov, Andrey	The effect of creep damage model formulation on crack path prediction	77-86
Ferreira, José / Oliveira, Sérgio / Silva, Joel / Capela, Carlos	Effect of machining parameters on the mechanical properties of high dosage short –carbon- fiber reinforced composites	249-256
Vicente, Carlos / Fernandes, João / Deus, Augusto / Vaz, Maria / Leite, Marco / Reis, Luis	Effect of protective coatings on the water absorption and mechanical properties of 3D printed PLA	748-756
Kikuchi, Shoichi / Nakatsuka, Yuta / Nakai, Yoshikazu / Nakatani, Masashi / Kawabata, Mie / Ameyama, Kei	Evaluation of Fatigue Properties under Four-point Bending and Fatigue Crack Propagation in Austenitic Stainless Steel with a Bimodal Harmonic Structure	545-553
Hussain, Mirzaul / Murthy, K. S. R. K.	Evaluation of mixed mode (I/II) notch stress intensity factors of sharp V-notches using a point substitution displacement technique	599-610
Bernardi, Patrizia / Cerioni, Roberto / Ferretti, Daniele / Leurini, Filippo / Michelini, Elena	Experimental characterization of fiber-reinforced cementitious mortar under tension	97-104
Kimakh, Khadija / Chouaf, Abdelkerim / Saoud, Amal / Mallil, El Hassan / Aghzer, Samir	Experimental investigation of surface roughness effect on fatigue performance of AISI 1045 carbon steel and fatigue limit prediction	429-441
Vshivkov, Aleksei / Plekhov, Oleg / Iziumova, Anastasiia / Zakharov, Aleksandr / Shlyannikov, Valery	The experimental study of heat dissipation during fatigue crack propagation under biaxial loading	50-57
Antunes, Fernando / Branco, Ricardo / Prates, Pedro / Costa, José	Fatigue crack growth in notched specimens: a numerical analysis	666-675
Brighenti, Roberto / Lewandowski, Janusz / Rozumek, Dariusz / Lesiuk, Grzegorz	Fatigue crack growth in welded S355 specimens subjected to combined loadings	10-17
Takahashi, Akiyuki / Suzuki, Ayaka / Kikuchi, Masanori	Fatigue crack growth simulation of two non-coplanar embedded cracks using s-version finite element method	473-480
Shao, Yuhong / Lu, Pengmin / Wang, Binhua / Xiang, Qingyi	Fatigue reliability assessment of small sample excavator working devices based on Bootstrap method	757-767
Chen, Bingzhi / Zhi, Pengpeng / Li, Yonghua	Fatigue Strength Analysis of Bogie Frame In Consideration of Parameter Uncertainty	385-399
Perez Mora, Ruben / Cruz Gonzalez, Celso Eduardo / Santillan Gutierrez, Saul Daniel / Taha Tijerina, Jose Jaime / Vargas Arista, Benjamin / Barba Pingarron, Arturo	Fatigue strength evaluation and fracture behavior of joined dual phase steel/AA6061-T6 aluminum alloy	530-544
Bouchikhi, Aboubakar Seddik / Lousdad, Abdelkader / Yassine, Khalfi / Bouida, Nasser / Gouasmi, Sadek / Megueni, Abdelkader	Finite Element Analysis of Interactions of between two cracks in FGM notched Plate under Mechanical Loading	174-192
Campilho, Raul / Viana, Filipe / Rocha, Ricardo / Silva, Daniel / Araújo, Rui / Ribeiro, José	Fracture modelling of adhesively-bonded joints by an inverse method	286-303
Kurek, Andrzej / Lagoda, Tadeusz	Fracture of elastic-brittle and elastic-plastic material in cantilever cyclic bending	42-49
Dominguez Almaraz, Gonzalo Mariano / Dominguez, Alexiane / Alonso, Necker J.	Granite stone subjected to ultrasonic fatigue tests under three point bending modality	70-76
Campos Pais Coelho, Carlos Alexandre / Navalho, Fábio V. P. / Reis, P. N. B.	Impact response of laminated cylindrical shells	411-418
Ghosh, Atasi	In-plane anisotropy in deformation micro-mechanism of commercially pure titanium during monotonic tension and cyclic loading	585-598
Okuda, Kanji / Ogawa, Kazuhiro / Ichikawa, Yuji / Shiozaki, Tsuyoshi / Yamaguchi, Naoki	Influence of microstructure on fatigue property of ultra high-strength steels	125-134
Gerbe, Sascha / Krupp, Ulrich / Michels, Wilhelm	Influence of secondary dendrite arm spacing (SDAS) on the fatigue properties of different conventional automotive aluminum cast alloys	105-115
Santus, Ciro	Initial orientation of the fretting fatigue cracks in shrink-fit connection specimens	442-450
Bezzerrouki, Mehadjia	Innovative geometric design improves the resistance of simple metal / metal lap joint	491-502
Bedi, Harpreet Singh / Billing, Beant / Agnihotri, Prabhat	Interfacial shear strength of carbon nanotubes based hybrid composites: effect of loading rate	571-576
Bellini, Costanzo / Carlino, Francesco	Intermetallic phase kinetic formation and thermal crack development in galvanized DCI	740-747
Ray, Sonalisa / Bhowmik, Sonali / Dubey, Sandeep	Investigation on fracture processes of concrete	419-428
Yamazaki, Yasuhiro	Isothermal and thermomechanical fatigue interaction in fatigue crack propagation behavior of a low-carbon nitrogen-controlled 316 stainless steel	26-33
Nikhil, R. / Krishnan, S. A. / Sasikala, G. / Moitra, A.	Limit load based evaluation of plastic η factor for C(T) specimen with a mismatched weld	523-529
Sun, Yi / Yan, Liping / Chen, Benyong / Song, Wei / Berto, Filippo	Localized wrinkling of metal films on elastic and liquid substrates	648-665
Krovvidi, S. C. S. P. Kumar / Goyal, Sunil / Bhaduri, A. K.	Low cycle fatigue and creep-fatigue response of the 316Ti stainless steel	577-584
Bressan, Stefano / Ogawa, Fumio / Itoh, Takamoto / Berto, Filippo	Low cycle fatigue behavior of additively manufactured Ti-6Al-4V under non-proportional and proportional loading	18-25
Mocian, Oana / Constantinescu, Dan / Sorohan, Stefan / Sandu, Marin	Low velocity failure and integrity assessment of foam core sandwich panels	230-241
khalfi, Yassine / Bouchikhi, Aboubakar Seddik / Bellebna, Yassine	Mechanical Stability Investigation of Advanced Composite Plates Resting on Elastic Foundations Using a New Four-Unknown Refined Theory	208-221
Profant, Tomas / Hrstka, Miroslav / Klusak, Jan	Microcrack interaction with circular inclusion and interfacial zone	503-512
Vshivkov, Aleksei / Plekhov, Oleg / Iziumova, Anastasiia / Venkatraman, Balasubramaniam	A model of energy dissipation at fatigue crack tip in metals	451-458
Gomes, Vítor / Rodrigues, Mariana / Correia, José / Figueiredo, Miguel / de Jesús, Abílio / Fernandes, António	Monotonic and Fracture Behaviours of Bolted Connections with Distinct Bolt Preloads and Surface Treatments	304-317
Giannella, Venanzio / Perrella, Michele	Multi-axial fatigue numerical crack propagation in cruciform specimens	639-647
Liu, Jian-guo / Zhou, Xiao-jun / Zhao, Wei / Shen, Yu-sheng / Xiao, Qing-hua	A new method for testing the interfacial shear properties between rock and early-aged shotcrete	161-173
Romanin, Luca / Vinogradov, Alexei / Berto, Filippo / Ferro, Paolo	A novel algorithm for crack path identification based on infrared images	116-124
Bouchouicha, Benattou / Tirenifi, Malika / Ould Chikh, El Bahri / Bensari, Ahmed	Numerical Comparison of Cruciform weld and Butt weld simulation and a Study of Fracture Mechanics on Two Types of Welds	357-369
Schuscha, Manuel / Leitner, Martin / Stoschka, Michael / Pusterhofer, Stefan / Meneghetti, Giovanni	Numerical crack growth study on porosity afflicted cast steel specimens	58-69
Estrada, Martin / Linero, Dorian / Takeuchi, Caori	Numerical model of cracking pattern in laminated bamboo specimens under tensile and shear loads	348-356
Puppio, Mario / Ferrini, Martina	Parametric analysis on external dissipative link system for seismic protection of low rise r.c. buildings	706-739
Miloudi, Abdelkader / Laredj, M. / Lousdad, A. / Benguediab, B.	Prediction and optimizing residual stress profile induced by cold expansion in aluminum alloys using experimental design	193-207
Ferreira, José / Febra, Tiago / Costa, José / Capela, Carlos	Response of fabric insert injection overmolding PP based composites subjected to single and muti-impact	242-248
Miranda, Antonio / Marques, Rafael / Meggiolaro, Marco / Pinho de Castro, Jaime	Stress Intensity Factor Equations for the Evolution of Surface and Corner Cracks to Through Cracks	611-629
Antunes, Fernando / Branco, Ricardo / Ferreira, José / Borrego, Luís	Stress Intensity Factor Solutions for CTS Mixed Mode Specimen	676-692
Fesenko, Anna / Vaysfeld, Nataly	An uncoupled thermoelasticity problem for a semi-infinite layer with regard of its proper weight	768-792
Campilho, Raul / Ribeiro, João / Rocha, Ricardo / Leal, Alberto / Viana, Filipe	Validation of fracture envelopes of structural adhesives for mixed-mode strength prediction of bonded joints	332-347

About this
data sheet
IssueID
37986
Published on:
23/10/2020
Last updated on:
23/10/2020

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Frattura ed Integrità Strutturale - v. 13, n. 48 (March 2019)

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Frattura ed Integrità Strutturale - v. 13, n. 48 (March 2019)

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.