Frattura ed Integrità Strutturale - v. 13, n. 48 (März 2019)

Erschienen:	März 2019

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Baptista, Ricardo / Infante, Virginia / Marques, Joao	Algorithm for automatic fatigue crack growth simulation on welded high strength steels	257-268
Nagaral, Madeva / Nayak, Prasad / Srinivas, H. K. / Auradi, V.	Characterization and Tensile Fractography of Nano ZrO2 Reinforced Copper-Zinc Alloy Composites	370-376
Patil, Hiralal / Patel, D. / Patil, C.	Characterizations of TIG welded joints of Unalloyed Commercially Pure Titanium Gr-2 for Weld Process Parameters	377-384
Berardi, Valentino / Perrella, Michele / Cricrì, Gabriele	Cohesive fracture in composite systems: experimental setup and first results	222-229
Christopher, J. / Praveen, C. / Choudhary, B. K.	Comparative evaluation of two physically based models for the description of stress-relaxation behaviour of 9% chromium containing steel	554-562
Barbosa, Joelton / Correia, José A. F. O. / Montenegro, Pedro / Júnior, Raimundo / Lesiuk, Grzegorz / de Jesús, Abílio / Calçada, Rui	A comparison between S-N Logistic and Kohout-Věchet formulations applied to the fatigue data of old metallic bridges materials	400-410
Maiorana, Emanuele	Contribution of longitudinal stiffener rigidity and position to bridge girder integrity	459-472
Zakharov, Alexander / Shlyannikov, Valery / Tumanov, Andrey	The crack path in fuselage panel under mixed mode biaxial loading	87-96
Brighenti, Roberto / Carpinteri, Andrea / Artoni, Federico	Crack paths in soft thin sheets	1-9
Malikova, Lucie / Razavi, Seyed / Berto, Filippo	Crack propagation in a brittle DCB specimen assessed by means of the Williams’ power expansion	34-41
Henkel, Sebastian / Wolf, Carl / Biermann, Horst / Burgold, Andreas / Kuna, Meinhard	Cruciform specimens used for determination of the influence of T-stress on fatigue crack growth with overloads on aluminum alloy Al 6061 T651	135-143
Silva, Ramon / Palechor, Erwin U. L. / Bezerra, Luciano M. / de Morais, Marcus V. G. / da Silva, Welington V.	Damage detection in a reinforced concrete bridge applying wavelet transform in experimental and numerical data	693-705
Reis, Luis / Caxias, Joao / Soares, Henrique / Costa, Pedro / Anes, Vitor / Freitas, Manuel	Damage evaluation under complex fatigue loading conditions	318-331
Wang, Xiaochuan / Yang, Delei	Damage evolution law on the surface field of argillaceous dolomite based on Brazilian test and 3D digital image correlation	144-151
Prawin, J. / Rama Mohan Rao, A.	Damage localization of closing cracks using a signal decomposition technique	513-522
Bär, Jürgen / Urbanek, Ralf	Determination of dissipated Energy in Fatigue Crack Propagation Experiments with Lock-In Thermography	563-570
Maciel, Ricardo / Infante, Virginia / Braga, Daniel / Moreira, Pedro / Bento, Tiago / Da Silva, Lucas	Development of hybrid friction stir welding and adhesive bonding single lap joints in aluminium alloys	269-285
Huang, Xiaoguang / Wang, Zhiqiang	Durability method on corrosion fatigue performance of AH 32 steel	481-490
Dhaka, Pankaj / Prakash, Raghu	Effect of Contact Geometry on the Contact Stresses in a Flat with Round Edge Contact	630-638
Metehri, Aicha / Kouider, Madani / Lousdad, Abdelkader	Effect of crack position and loading conditions on SIF in SiC particles reinforced Al composite	152-160
Shlyannikov, Valery / Tumanov, Andrey	The effect of creep damage model formulation on crack path prediction	77-86
Ferreira, José / Oliveira, Sérgio / Silva, Joel / Capela, Carlos	Effect of machining parameters on the mechanical properties of high dosage short –carbon- fiber reinforced composites	249-256
Vicente, Carlos / Fernandes, João / Deus, Augusto / Vaz, Maria / Leite, Marco / Reis, Luis	Effect of protective coatings on the water absorption and mechanical properties of 3D printed PLA	748-756
Kikuchi, Shoichi / Nakatsuka, Yuta / Nakai, Yoshikazu / Nakatani, Masashi / Kawabata, Mie / Ameyama, Kei	Evaluation of Fatigue Properties under Four-point Bending and Fatigue Crack Propagation in Austenitic Stainless Steel with a Bimodal Harmonic Structure	545-553
Hussain, Mirzaul / Murthy, K. S. R. K.	Evaluation of mixed mode (I/II) notch stress intensity factors of sharp V-notches using a point substitution displacement technique	599-610
Bernardi, Patrizia / Cerioni, Roberto / Ferretti, Daniele / Leurini, Filippo / Michelini, Elena	Experimental characterization of fiber-reinforced cementitious mortar under tension	97-104
Kimakh, Khadija / Chouaf, Abdelkerim / Saoud, Amal / Mallil, El Hassan / Aghzer, Samir	Experimental investigation of surface roughness effect on fatigue performance of AISI 1045 carbon steel and fatigue limit prediction	429-441
Vshivkov, Aleksei / Plekhov, Oleg / Iziumova, Anastasiia / Zakharov, Aleksandr / Shlyannikov, Valery	The experimental study of heat dissipation during fatigue crack propagation under biaxial loading	50-57
Antunes, Fernando / Branco, Ricardo / Prates, Pedro / Costa, José	Fatigue crack growth in notched specimens: a numerical analysis	666-675
Brighenti, Roberto / Lewandowski, Janusz / Rozumek, Dariusz / Lesiuk, Grzegorz	Fatigue crack growth in welded S355 specimens subjected to combined loadings	10-17
Takahashi, Akiyuki / Suzuki, Ayaka / Kikuchi, Masanori	Fatigue crack growth simulation of two non-coplanar embedded cracks using s-version finite element method	473-480
Shao, Yuhong / Lu, Pengmin / Wang, Binhua / Xiang, Qingyi	Fatigue reliability assessment of small sample excavator working devices based on Bootstrap method	757-767
Chen, Bingzhi / Zhi, Pengpeng / Li, Yonghua	Fatigue Strength Analysis of Bogie Frame In Consideration of Parameter Uncertainty	385-399
Perez Mora, Ruben / Cruz Gonzalez, Celso Eduardo / Santillan Gutierrez, Saul Daniel / Taha Tijerina, Jose Jaime / Vargas Arista, Benjamin / Barba Pingarron, Arturo	Fatigue strength evaluation and fracture behavior of joined dual phase steel/AA6061-T6 aluminum alloy	530-544
Bouchikhi, Aboubakar Seddik / Lousdad, Abdelkader / Yassine, Khalfi / Bouida, Nasser / Gouasmi, Sadek / Megueni, Abdelkader	Finite Element Analysis of Interactions of between two cracks in FGM notched Plate under Mechanical Loading	174-192
Campilho, Raul / Viana, Filipe / Rocha, Ricardo / Silva, Daniel / Araújo, Rui / Ribeiro, José	Fracture modelling of adhesively-bonded joints by an inverse method	286-303
Kurek, Andrzej / Lagoda, Tadeusz	Fracture of elastic-brittle and elastic-plastic material in cantilever cyclic bending	42-49
Dominguez Almaraz, Gonzalo Mariano / Dominguez, Alexiane / Alonso, Necker J.	Granite stone subjected to ultrasonic fatigue tests under three point bending modality	70-76
Campos Pais Coelho, Carlos Alexandre / Navalho, Fábio V. P. / Reis, P. N. B.	Impact response of laminated cylindrical shells	411-418
Ghosh, Atasi	In-plane anisotropy in deformation micro-mechanism of commercially pure titanium during monotonic tension and cyclic loading	585-598
Okuda, Kanji / Ogawa, Kazuhiro / Ichikawa, Yuji / Shiozaki, Tsuyoshi / Yamaguchi, Naoki	Influence of microstructure on fatigue property of ultra high-strength steels	125-134
Gerbe, Sascha / Krupp, Ulrich / Michels, Wilhelm	Influence of secondary dendrite arm spacing (SDAS) on the fatigue properties of different conventional automotive aluminum cast alloys	105-115
Santus, Ciro	Initial orientation of the fretting fatigue cracks in shrink-fit connection specimens	442-450
Bezzerrouki, Mehadjia	Innovative geometric design improves the resistance of simple metal / metal lap joint	491-502
Bedi, Harpreet Singh / Billing, Beant / Agnihotri, Prabhat	Interfacial shear strength of carbon nanotubes based hybrid composites: effect of loading rate	571-576
Bellini, Costanzo / Carlino, Francesco	Intermetallic phase kinetic formation and thermal crack development in galvanized DCI	740-747
Ray, Sonalisa / Bhowmik, Sonali / Dubey, Sandeep	Investigation on fracture processes of concrete	419-428
Yamazaki, Yasuhiro	Isothermal and thermomechanical fatigue interaction in fatigue crack propagation behavior of a low-carbon nitrogen-controlled 316 stainless steel	26-33
Nikhil, R. / Krishnan, S. A. / Sasikala, G. / Moitra, A.	Limit load based evaluation of plastic η factor for C(T) specimen with a mismatched weld	523-529
Sun, Yi / Yan, Liping / Chen, Benyong / Song, Wei / Berto, Filippo	Localized wrinkling of metal films on elastic and liquid substrates	648-665
Krovvidi, S. C. S. P. Kumar / Goyal, Sunil / Bhaduri, A. K.	Low cycle fatigue and creep-fatigue response of the 316Ti stainless steel	577-584
Bressan, Stefano / Ogawa, Fumio / Itoh, Takamoto / Berto, Filippo	Low cycle fatigue behavior of additively manufactured Ti-6Al-4V under non-proportional and proportional loading	18-25
Mocian, Oana / Constantinescu, Dan / Sorohan, Stefan / Sandu, Marin	Low velocity failure and integrity assessment of foam core sandwich panels	230-241
khalfi, Yassine / Bouchikhi, Aboubakar Seddik / Bellebna, Yassine	Mechanical Stability Investigation of Advanced Composite Plates Resting on Elastic Foundations Using a New Four-Unknown Refined Theory	208-221
Profant, Tomas / Hrstka, Miroslav / Klusak, Jan	Microcrack interaction with circular inclusion and interfacial zone	503-512
Vshivkov, Aleksei / Plekhov, Oleg / Iziumova, Anastasiia / Venkatraman, Balasubramaniam	A model of energy dissipation at fatigue crack tip in metals	451-458
Gomes, Vítor / Rodrigues, Mariana / Correia, José / Figueiredo, Miguel / de Jesús, Abílio / Fernandes, António	Monotonic and Fracture Behaviours of Bolted Connections with Distinct Bolt Preloads and Surface Treatments	304-317
Giannella, Venanzio / Perrella, Michele	Multi-axial fatigue numerical crack propagation in cruciform specimens	639-647
Liu, Jian-guo / Zhou, Xiao-jun / Zhao, Wei / Shen, Yu-sheng / Xiao, Qing-hua	A new method for testing the interfacial shear properties between rock and early-aged shotcrete	161-173
Romanin, Luca / Vinogradov, Alexei / Berto, Filippo / Ferro, Paolo	A novel algorithm for crack path identification based on infrared images	116-124
Bouchouicha, Benattou / Tirenifi, Malika / Ould Chikh, El Bahri / Bensari, Ahmed	Numerical Comparison of Cruciform weld and Butt weld simulation and a Study of Fracture Mechanics on Two Types of Welds	357-369
Schuscha, Manuel / Leitner, Martin / Stoschka, Michael / Pusterhofer, Stefan / Meneghetti, Giovanni	Numerical crack growth study on porosity afflicted cast steel specimens	58-69
Estrada, Martin / Linero, Dorian / Takeuchi, Caori	Numerical model of cracking pattern in laminated bamboo specimens under tensile and shear loads	348-356
Puppio, Mario / Ferrini, Martina	Parametric analysis on external dissipative link system for seismic protection of low rise r.c. buildings	706-739
Miloudi, Abdelkader / Laredj, M. / Lousdad, A. / Benguediab, B.	Prediction and optimizing residual stress profile induced by cold expansion in aluminum alloys using experimental design	193-207
Ferreira, José / Febra, Tiago / Costa, José / Capela, Carlos	Response of fabric insert injection overmolding PP based composites subjected to single and muti-impact	242-248
Miranda, Antonio / Marques, Rafael / Meggiolaro, Marco / Pinho de Castro, Jaime	Stress Intensity Factor Equations for the Evolution of Surface and Corner Cracks to Through Cracks	611-629
Antunes, Fernando / Branco, Ricardo / Ferreira, José / Borrego, Luís	Stress Intensity Factor Solutions for CTS Mixed Mode Specimen	676-692
Fesenko, Anna / Vaysfeld, Nataly	An uncoupled thermoelasticity problem for a semi-infinite layer with regard of its proper weight	768-792
Campilho, Raul / Ribeiro, João / Rocha, Ricardo / Leal, Alberto / Viana, Filipe	Validation of fracture envelopes of structural adhesives for mixed-mode strength prediction of bonded joints	332-347

Über diese
Datenseite
IssueID
37986
Veröffentlicht am:
23.10.2020
Geändert am:
23.10.2020

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Frattura ed Integrità Strutturale - v. 13, n. 48 (März 2019)

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Frattura ed Integrità Strutturale - v. 13, n. 48 (März 2019)

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.