Frattura ed Integrità Strutturale - v. 13, n. 49 (June 2019)

Published:	June 2019

Articles in this Issue

Author(s)	Title	Page(s)
Djebli, Abdelkader / Besseghier, El Hadj / Bendouba, Mostefa / Baltach, Abdelghani / Aid, Abdelkrim	A 3D analysis of crack-front shape of asymmetric repaired aluminum panels with composite patches	547-556
Profant, Tomas / Pokluda, Jaroslav	The ab-initio aided strain gradient elasticity theory	107-114
Nikitin, Aleksandr / Burago, Nikolay / Nikitin, Ilia / Stratula, Boris	Algorithms for calculation damage processes	212-224
Cao, Hongmei	Analysis of mechanical properties of transition segment of road and bridge based on high-strength foam concrete	831-839
Lekomtsev, Sergei / Bochkarev, Sergey / Senin, Alexander	Analysis of spatial vibrations of piezoceramic eccentric cylindrical shells interacting with an annular fluid layer	814-830
Adinoyi, Muhammed / Merah, Nesar / Albinmousa, Jafar	Analysis of the Fatigue Damage Behavior of AW2099-T83 Al-Li Alloy under Strain-Controlled Fatigue	487-506
Kaddouri, Nadia / Kouider, Madani / Amine, Mohammed / Feaugas, Xavier	Analysis of the presence of bonding defects on the fracture behavior of a damaged plate repaired by composite patch	331-340
Allaoui, Abdelhalim / Guedri, Abdelmoumene / Darsouni, Lamia / Darsouni, Abderrazek	ANN Approach to Predict the Flow Stress of CMn (Nb-Ti-V) Micro Alloyed Steel	350-359
Vedernikova, Alena / Iziumova, A. / Vshivkov, A. / Plekhov, Oleg	The approach to fracture diagnosis by means of experimental measurements of the stored energy	314-320
Seitl, Stanislav / Miarka, Petr / Ruzicka, Vladimir / Malikova, Lucie / Cruces, Alejandro / Lopez Crespo, Pablo	Approximation of the crack-tip field in fatigue cracks in bridge steel specimens: DIC analysis of different constraint levels	97-106
Meneghetti, Giovanni / Campagnolo, Alberto / Berto, Filippo	Averaged strain energy density estimated rapidly from the nodal stresses by FEM for cracks under mixed mode loadings including the T-stress contribution	53-64
Berrekia, Habib / Benzerga, D. / Haddi, A.	Behavior and damage of a pipe in the presence of a corrosion defect depth of 10% of its thickness and highlighting the weaknesses of the ASME / B31G method	643-654
Liu, Yan / Ren, Jun / Li, Zhongxian / Gao, Qiuli / Zhao, Shengli	Carbonization Resistance of Reinforced Concrete under Bending Load	714-724
Pereira, Samuel / Carvalho, André / Reis, Luis / Freitas, Manuel / Montalvão, Diogo	Characterisation and Evaluation of the Mechanical Behaviour of Endodontic-grade NiTi Wires	450-462
Abbadeni, Mohammed / Zidane, Ibrahim / Zahloul, Hamou / Madaoui, Zakaria	Comparative study of conventional and hydromechanical deep drawing processes based on finite element analysis	282-290
Zamaraev, lev / Smirnov, Sergey	Comparative study of Shot creep of single-phase titanium alloys in air and neutral gas environment on the test temperature in range from 673 to 1323 K	201-211
Matvienko, Yury	Comparison of the constraint parameters in elastic-plastic fracture mechanics	36-43
Tashkinov, Mikhail / Ershova, Daria / Shalimov, Aleksandr	Computational multi-scale analysis of simultaneous processes of delamination and damage accumulation in laminated composites	396-411
Korepanova, Tatyana / Matveenko, Valerii / Shardakov, Igor	Construction of Analytical Eigensolutions for Isotropic Conical Bodies and Their Application for Estimation of Stresses Singularity	225-242
Hadj Miloud, Mohamed / Zidane, Ibrahim / Mendas, Mohammed	Coupled identification of the hardening behavior laws and Gurson–Tvergaard–Needleman damage parameters - Validation on tear test of 12NiCr6 CT specimen	630-642
Mawloud, Hamdi / Zenasni, Ramdane / Khiat, Sidi Mohammed Amine	Critically evaluating mechanics of structure genome-based micromechanics approach	321-330
Bannikov, Mikhail / Bilalov, Dmitry / Oborin, Vladimir / Naimark, Oleg	Damage evolution in the AMg6 alloy during high and very high cycle fatigue	383-395
Lopez Palechor, Erwin / Bezerra, Luciano / de Morais, Marcus Vinicius / Silva, Ramon / Barros, Edenia	Damage identification in beams using additional rove mass and wavelet transform	614-629
Djaballah, Said / Meftah, Kamel / Khelil, Khaled / Tedjini, Mohsein / Sedira, Lakhdar	Detection and diagnosis of fault bearing using wavelet packet transform and neural network	291-301
Chbani, Hamza / Saadouki, Bouchra / Boudlal, Mostapha / Barakat, Mohamed	A Determination of fracture toughness in plain concrete specimens by R curve	763-774
Breitbarth, Eric / Strohmann, Tobias / Besel, Michael / Reh, Stefan	Determination of Stress Intensity Factors and J integral based on Digital Image Correlation	12-25
Naimark, Oleg	Duality of singularities of multiscale damage localization and crack advance: length variety in Theory of Critical Distances	272-281
Guillal, Abdelkader / Abdelbaki, Noureddine / Bensghier, Mohamed el Amine / Kopei, Bogdan / Bettayeb, Mourad	Effect of shape factor on structural reliability analysis of a surface cracked pipeline-parametric study	341-349
Puppio, Mario / Giresini, Linda	Estimation of tensile mechanical parameters of existing masonry through the analysis of the collapse of Volterra’s urban walls	725-738
Pola, Annalisa / Battini, Davide / Tocci, Marialaura / Avanzini, Andrea / Girelli, Luca / Petrogalli, Candida / Gelfi, Marcello	Evaluation on the fatigue behavior of sand-blasted AlSi10Mg obtained by DMLS	775-790
Bellini, Costanzo / Di Cocco, Vittorio / Iacoviello, Francesco / Sorrentino, Luca	Experimental analysis of aluminium/carbon epoxy hybrid laminates under flexural load	739-747
Suchy, Lukas / Leidich, E. / Hasse, A. / Gerstmann, T. / Awiszus, B.	Fatigue strength of inner knurled interference fit joined by forming and cutting methods	429-434
Abdelouahed, Elamine / Mokhtari, M. / Benzaama, H.	Finite Element Analysis of the thermo-Mechanical Behavior of composite Pipe Elbows under Bending and Pressure loading	698-713
Marat-Mendes, Rosa / Martins, Ricardo / Garcia, Alexandre / Reis, Luis	Flexural testing and analysis of full-strain-fields in sandwich composites	568-585
Restuccia, Luciana	Fracture properties of green mortars with recycled sand	676-689
Bellini, Costanzo / Giuliano, Gillo / Sorrentino, Luca	Friction influence on the AA6060 aluminium alloy formability	791-799
Chang, Yukun / Zheng, Liang / Pan, Xiangnan / Hong, Youshi	Further investigation on microstructure refinement of internal crack initiation region in VHCF regime of high-strength steels	1-11
Araújo, Hugo / Leite, Marco / Ribeiro, AMR / Deus, Augusto M. / Reis, Luis / Vaz, M. Fatima	Investigating the contribution of geometry on the failure of cellular core structures obtained by additive manufacturing	478-486
Gonçalves Pereira, Sérgio / Tavares, Sérgio / de Castro, Paulo	Mixed mode fracture: numerical evaluation and experimental validation using PMMA specimens	412-428
Kondratev, Nikita / Trusov, Peter / Makarevich, Elena	Multi-level model describing phase transformations of polycrystalline materials under thermo-mechanical impacts	125-139
Malikova, Lucie / Šimonová, Hana / Kucharczyková, Barbara / Miarka, Petr	Multi-parameter fracture mechanics	65-73
Kostina, Anastasiia / Zhelnin, Maxim / Plekhov, Oleg	Numerical analysis of a caprock integrity during oil production by steam-assisted gravity drainage method	302-313
Zhelnin, Maxim / Kostina, Anastasiia / Plekhov, Oleg / Panteleev, Ivan / Levin, Lev	Numerical analysis of application limits of Vyalov’s formula for an ice-soil thickness	156-166
Ayan, Akhmetov / Smolin, Igor / Peryshkin, Aleksey	Numerical analysis of the state of stress and strain in the Yenisei Ridge based on the regional tectonic state in the Asian continent	190-200
Kosheleva, Natalia / Matveenko, Valerii / Serovaev, Grigorii / Fedorov, Andrey	Numerical analysis of the strain values obtained by FBG embedded in a composite material using assumptions about uniaxial stress state of the optical fiber and capillary on the Bragg grating	177-189
Smetannikov, Oleg / Kashnikov, Yuriy / Ashikhmin, Sergey / Kukhtinskiy, Artem	Numerical model of fracture growth in hydraulic re-fracturing	140-155
Abderahmane, Sahli / Djafar, Ait Kaci / Rachid, Zahi / Abdelmadjid, Moulgada / Smail, Benbarek	Numerical simulation of a crack emanating from a micro-cavity in the orthopedic cement by technical sub modeling of total hip prosthesis	586-598
Semin, Mikhail / Levin, Lev	Numerical simulation of frozen wall formation in water-saturated rock mass by solving the Darcy-Stefan problem	167-176
Muthanna, Bassam / Bouledroua, Omar / Meriem-Benziane, Madjid / Hadj-Meliani, Mohammed / Pluvinage, Guy / Suleiman, Rami Khalid	Numerical study of semi-elliptical cracks in the critical position of pipe elbow	463-477
Bendada, Aya / Boutchicha, Djilali / Chouiter, Adel / Miri, Mokhtaria	Numerical-Experimental characterization of honeycomb sandwich panel and numerical modal analysis of implemented delamination	655-665
Lobanov, Sergey / Baryakh, Alexander	On one approach to the numerical modeling of the strain-stress state of layered rock mass	255-266
Meneghetti, Giovanni / Ricotta, Mauro / Pitarresi, Giuseppe	On relation between J-integral and heat energy dissipation at the crack tip in stainless steel specimens	82-96
Kumar, Dhirendra / Jayaraman, G. / Swamy, M. / Pavan, A. H. V. / Antony, M. C. / Sudhakar, A. N.	Optimization of Vanadium Content for Achieving Higher Wear Resistance and Hardness in High Cr-V White Cast Irons for Ball Tube Mill Liner Application	507-514
Abdelouahed, Elamine / Benzaama, H. / Mokhtari, M. / Aour, B.	Pipeline repair by composite patch under temperature and Pressure loading	690-697
Iurlova, Nataliia / Oshmarin, Dmitrii / Iurlov, Maksim / Sevodina, Nataliya	Possibility of tuning shunt circuits for multimodal damping of vibrations of structure with piezoelectric element	800-813
Prakash, Raghu / John, Mathew	Post- Impact Fatigue Damage Analysis of Quasi Isotropic CFRP Laminates through Infrared Thermography	536-546
Matvienko, Yury / Popova, Nataliya / Morozov, Evgeny	Predicting the crack path in a wedge under a concentrated tensile force by means of variational principle	267-271
En-naji, Abderrazak / Mouhib, N. / Farid, H. / El Ghorba, M.	Prediction of thermomechanical behavior of acrylonitrile butadiene styrene using a newly developed nonlinear damage-reliability model	748-762
Liu, Chenyang / Wang, Yong / Zhang, XiaoPei / Du, LiZhi	Rock Brittleness Evaluation Method Based on the Complete Stress-Strain Curve	557-567
Vakhrushev, Alexander / Fedotov, A. Y.	Simulation of deformation and fracture processes in nanocomposites	370-382
Suresh Kumar, R. / Rao, B. / Velusamy, K. / Jalaldeen, S.	Specimen Level and Component Level Simulations of Fatigue Crack Growth Behavior under Cyclic Bending	526-535
Bayandin, Yuriy / Saveleva, Natalia / Naimark, Oleg	Steady plastic wave fronts and scale universality of strain localization in metals and ceramics	243-256
Belhadri, Djamel Eddine / Belhamiani, Mohamed / Bouzitouna, Wahiba Nesrine / Oudad, Wahid	Stress intensity factors analyses for external semi-elliptical crack for repaired gas-pipeline by composite overwrap under pressure	599-613
Kumar, Ashish / Bhat, Y. V. / Sreedhar, B. K. / Raj, S. I. / Prakash, V. / Selvaraj, P.	Structural Integrity Assessment of Weld for Joining Waveguide to Annular Linear Induction Pump Subjected to Vibration	515-525
Dominguez Almaraz, Gonzalo Mariano / Torres Duarte, Luis M. / Torres Pacheco, Christian J.	Tension - torsion fatigue tests on the proton exchange membrane Nafion 115 (Perfluorosulfonic acid)	360-369
Campilho, Raul / Moreira, Filipe	Use of the XFEM for the design of adhesively-bonded T-joints	435-449
Gonzáles, Giancarlo / González, Julián / Castro, Jaime / Freire, José	Using DIC techniques to measure strain ranges inside the cyclic plastic zone ahead of a fatigue crack tip	74-81
González, Julián / de Castro, Jaime / Gonzáles, Giancarlo / Meggiolaro, Marco / Freire, José	Verification of the ΔKeff hypothesis along the fatigue crack path in thin and thick Al specimens	26-35
Saadallah, Younès / Derfouf, Semcheddine / Guerira, Belhi	A viscoelastic-viscoplastic model for a thermoplastic and sensitivity of its rheological parameters to the strain-rate	666-675

About this
data sheet
IssueID
37985
Published on:
24/10/2020
Last updated on:
24/10/2020

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Frattura ed Integrità Strutturale - v. 13, n. 49 (June 2019)

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Frattura ed Integrità Strutturale - v. 13, n. 49 (June 2019)

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.