Frattura ed Integrità Strutturale - v. 13, n. 49 (juin 2019)

Publié:	juin 2019

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Djebli, Abdelkader / Besseghier, El Hadj / Bendouba, Mostefa / Baltach, Abdelghani / Aid, Abdelkrim	A 3D analysis of crack-front shape of asymmetric repaired aluminum panels with composite patches	547-556
Profant, Tomas / Pokluda, Jaroslav	The ab-initio aided strain gradient elasticity theory	107-114
Nikitin, Aleksandr / Burago, Nikolay / Nikitin, Ilia / Stratula, Boris	Algorithms for calculation damage processes	212-224
Cao, Hongmei	Analysis of mechanical properties of transition segment of road and bridge based on high-strength foam concrete	831-839
Lekomtsev, Sergei / Bochkarev, Sergey / Senin, Alexander	Analysis of spatial vibrations of piezoceramic eccentric cylindrical shells interacting with an annular fluid layer	814-830
Adinoyi, Muhammed / Merah, Nesar / Albinmousa, Jafar	Analysis of the Fatigue Damage Behavior of AW2099-T83 Al-Li Alloy under Strain-Controlled Fatigue	487-506
Kaddouri, Nadia / Kouider, Madani / Amine, Mohammed / Feaugas, Xavier	Analysis of the presence of bonding defects on the fracture behavior of a damaged plate repaired by composite patch	331-340
Allaoui, Abdelhalim / Guedri, Abdelmoumene / Darsouni, Lamia / Darsouni, Abderrazek	ANN Approach to Predict the Flow Stress of CMn (Nb-Ti-V) Micro Alloyed Steel	350-359
Vedernikova, Alena / Iziumova, A. / Vshivkov, A. / Plekhov, Oleg	The approach to fracture diagnosis by means of experimental measurements of the stored energy	314-320
Seitl, Stanislav / Miarka, Petr / Ruzicka, Vladimir / Malikova, Lucie / Cruces, Alejandro / Lopez Crespo, Pablo	Approximation of the crack-tip field in fatigue cracks in bridge steel specimens: DIC analysis of different constraint levels	97-106
Meneghetti, Giovanni / Campagnolo, Alberto / Berto, Filippo	Averaged strain energy density estimated rapidly from the nodal stresses by FEM for cracks under mixed mode loadings including the T-stress contribution	53-64
Berrekia, Habib / Benzerga, D. / Haddi, A.	Behavior and damage of a pipe in the presence of a corrosion defect depth of 10% of its thickness and highlighting the weaknesses of the ASME / B31G method	643-654
Liu, Yan / Ren, Jun / Li, Zhongxian / Gao, Qiuli / Zhao, Shengli	Carbonization Resistance of Reinforced Concrete under Bending Load	714-724
Pereira, Samuel / Carvalho, André / Reis, Luis / Freitas, Manuel / Montalvão, Diogo	Characterisation and Evaluation of the Mechanical Behaviour of Endodontic-grade NiTi Wires	450-462
Abbadeni, Mohammed / Zidane, Ibrahim / Zahloul, Hamou / Madaoui, Zakaria	Comparative study of conventional and hydromechanical deep drawing processes based on finite element analysis	282-290
Zamaraev, lev / Smirnov, Sergey	Comparative study of Shot creep of single-phase titanium alloys in air and neutral gas environment on the test temperature in range from 673 to 1323 K	201-211
Matvienko, Yury	Comparison of the constraint parameters in elastic-plastic fracture mechanics	36-43
Tashkinov, Mikhail / Ershova, Daria / Shalimov, Aleksandr	Computational multi-scale analysis of simultaneous processes of delamination and damage accumulation in laminated composites	396-411
Korepanova, Tatyana / Matveenko, Valerii / Shardakov, Igor	Construction of Analytical Eigensolutions for Isotropic Conical Bodies and Their Application for Estimation of Stresses Singularity	225-242
Hadj Miloud, Mohamed / Zidane, Ibrahim / Mendas, Mohammed	Coupled identification of the hardening behavior laws and Gurson–Tvergaard–Needleman damage parameters - Validation on tear test of 12NiCr6 CT specimen	630-642
Mawloud, Hamdi / Zenasni, Ramdane / Khiat, Sidi Mohammed Amine	Critically evaluating mechanics of structure genome-based micromechanics approach	321-330
Bannikov, Mikhail / Bilalov, Dmitry / Oborin, Vladimir / Naimark, Oleg	Damage evolution in the AMg6 alloy during high and very high cycle fatigue	383-395
Lopez Palechor, Erwin / Bezerra, Luciano / de Morais, Marcus Vinicius / Silva, Ramon / Barros, Edenia	Damage identification in beams using additional rove mass and wavelet transform	614-629
Djaballah, Said / Meftah, Kamel / Khelil, Khaled / Tedjini, Mohsein / Sedira, Lakhdar	Detection and diagnosis of fault bearing using wavelet packet transform and neural network	291-301
Chbani, Hamza / Saadouki, Bouchra / Boudlal, Mostapha / Barakat, Mohamed	A Determination of fracture toughness in plain concrete specimens by R curve	763-774
Breitbarth, Eric / Strohmann, Tobias / Besel, Michael / Reh, Stefan	Determination of Stress Intensity Factors and J integral based on Digital Image Correlation	12-25
Naimark, Oleg	Duality of singularities of multiscale damage localization and crack advance: length variety in Theory of Critical Distances	272-281
Guillal, Abdelkader / Abdelbaki, Noureddine / Bensghier, Mohamed el Amine / Kopei, Bogdan / Bettayeb, Mourad	Effect of shape factor on structural reliability analysis of a surface cracked pipeline-parametric study	341-349
Puppio, Mario / Giresini, Linda	Estimation of tensile mechanical parameters of existing masonry through the analysis of the collapse of Volterra’s urban walls	725-738
Pola, Annalisa / Battini, Davide / Tocci, Marialaura / Avanzini, Andrea / Girelli, Luca / Petrogalli, Candida / Gelfi, Marcello	Evaluation on the fatigue behavior of sand-blasted AlSi10Mg obtained by DMLS	775-790
Bellini, Costanzo / Di Cocco, Vittorio / Iacoviello, Francesco / Sorrentino, Luca	Experimental analysis of aluminium/carbon epoxy hybrid laminates under flexural load	739-747
Suchy, Lukas / Leidich, E. / Hasse, A. / Gerstmann, T. / Awiszus, B.	Fatigue strength of inner knurled interference fit joined by forming and cutting methods	429-434
Abdelouahed, Elamine / Mokhtari, M. / Benzaama, H.	Finite Element Analysis of the thermo-Mechanical Behavior of composite Pipe Elbows under Bending and Pressure loading	698-713
Marat-Mendes, Rosa / Martins, Ricardo / Garcia, Alexandre / Reis, Luis	Flexural testing and analysis of full-strain-fields in sandwich composites	568-585
Restuccia, Luciana	Fracture properties of green mortars with recycled sand	676-689
Bellini, Costanzo / Giuliano, Gillo / Sorrentino, Luca	Friction influence on the AA6060 aluminium alloy formability	791-799
Chang, Yukun / Zheng, Liang / Pan, Xiangnan / Hong, Youshi	Further investigation on microstructure refinement of internal crack initiation region in VHCF regime of high-strength steels	1-11
Araújo, Hugo / Leite, Marco / Ribeiro, AMR / Deus, Augusto M. / Reis, Luis / Vaz, M. Fatima	Investigating the contribution of geometry on the failure of cellular core structures obtained by additive manufacturing	478-486
Gonçalves Pereira, Sérgio / Tavares, Sérgio / de Castro, Paulo	Mixed mode fracture: numerical evaluation and experimental validation using PMMA specimens	412-428
Kondratev, Nikita / Trusov, Peter / Makarevich, Elena	Multi-level model describing phase transformations of polycrystalline materials under thermo-mechanical impacts	125-139
Malikova, Lucie / Šimonová, Hana / Kucharczyková, Barbara / Miarka, Petr	Multi-parameter fracture mechanics	65-73
Kostina, Anastasiia / Zhelnin, Maxim / Plekhov, Oleg	Numerical analysis of a caprock integrity during oil production by steam-assisted gravity drainage method	302-313
Zhelnin, Maxim / Kostina, Anastasiia / Plekhov, Oleg / Panteleev, Ivan / Levin, Lev	Numerical analysis of application limits of Vyalov’s formula for an ice-soil thickness	156-166
Ayan, Akhmetov / Smolin, Igor / Peryshkin, Aleksey	Numerical analysis of the state of stress and strain in the Yenisei Ridge based on the regional tectonic state in the Asian continent	190-200
Kosheleva, Natalia / Matveenko, Valerii / Serovaev, Grigorii / Fedorov, Andrey	Numerical analysis of the strain values obtained by FBG embedded in a composite material using assumptions about uniaxial stress state of the optical fiber and capillary on the Bragg grating	177-189
Smetannikov, Oleg / Kashnikov, Yuriy / Ashikhmin, Sergey / Kukhtinskiy, Artem	Numerical model of fracture growth in hydraulic re-fracturing	140-155
Abderahmane, Sahli / Djafar, Ait Kaci / Rachid, Zahi / Abdelmadjid, Moulgada / Smail, Benbarek	Numerical simulation of a crack emanating from a micro-cavity in the orthopedic cement by technical sub modeling of total hip prosthesis	586-598
Semin, Mikhail / Levin, Lev	Numerical simulation of frozen wall formation in water-saturated rock mass by solving the Darcy-Stefan problem	167-176
Muthanna, Bassam / Bouledroua, Omar / Meriem-Benziane, Madjid / Hadj-Meliani, Mohammed / Pluvinage, Guy / Suleiman, Rami Khalid	Numerical study of semi-elliptical cracks in the critical position of pipe elbow	463-477
Bendada, Aya / Boutchicha, Djilali / Chouiter, Adel / Miri, Mokhtaria	Numerical-Experimental characterization of honeycomb sandwich panel and numerical modal analysis of implemented delamination	655-665
Lobanov, Sergey / Baryakh, Alexander	On one approach to the numerical modeling of the strain-stress state of layered rock mass	255-266
Meneghetti, Giovanni / Ricotta, Mauro / Pitarresi, Giuseppe	On relation between J-integral and heat energy dissipation at the crack tip in stainless steel specimens	82-96
Kumar, Dhirendra / Jayaraman, G. / Swamy, M. / Pavan, A. H. V. / Antony, M. C. / Sudhakar, A. N.	Optimization of Vanadium Content for Achieving Higher Wear Resistance and Hardness in High Cr-V White Cast Irons for Ball Tube Mill Liner Application	507-514
Abdelouahed, Elamine / Benzaama, H. / Mokhtari, M. / Aour, B.	Pipeline repair by composite patch under temperature and Pressure loading	690-697
Iurlova, Nataliia / Oshmarin, Dmitrii / Iurlov, Maksim / Sevodina, Nataliya	Possibility of tuning shunt circuits for multimodal damping of vibrations of structure with piezoelectric element	800-813
Prakash, Raghu / John, Mathew	Post- Impact Fatigue Damage Analysis of Quasi Isotropic CFRP Laminates through Infrared Thermography	536-546
Matvienko, Yury / Popova, Nataliya / Morozov, Evgeny	Predicting the crack path in a wedge under a concentrated tensile force by means of variational principle	267-271
En-naji, Abderrazak / Mouhib, N. / Farid, H. / El Ghorba, M.	Prediction of thermomechanical behavior of acrylonitrile butadiene styrene using a newly developed nonlinear damage-reliability model	748-762
Liu, Chenyang / Wang, Yong / Zhang, XiaoPei / Du, LiZhi	Rock Brittleness Evaluation Method Based on the Complete Stress-Strain Curve	557-567
Vakhrushev, Alexander / Fedotov, A. Y.	Simulation of deformation and fracture processes in nanocomposites	370-382
Suresh Kumar, R. / Rao, B. / Velusamy, K. / Jalaldeen, S.	Specimen Level and Component Level Simulations of Fatigue Crack Growth Behavior under Cyclic Bending	526-535
Bayandin, Yuriy / Saveleva, Natalia / Naimark, Oleg	Steady plastic wave fronts and scale universality of strain localization in metals and ceramics	243-256
Belhadri, Djamel Eddine / Belhamiani, Mohamed / Bouzitouna, Wahiba Nesrine / Oudad, Wahid	Stress intensity factors analyses for external semi-elliptical crack for repaired gas-pipeline by composite overwrap under pressure	599-613
Kumar, Ashish / Bhat, Y. V. / Sreedhar, B. K. / Raj, S. I. / Prakash, V. / Selvaraj, P.	Structural Integrity Assessment of Weld for Joining Waveguide to Annular Linear Induction Pump Subjected to Vibration	515-525
Dominguez Almaraz, Gonzalo Mariano / Torres Duarte, Luis M. / Torres Pacheco, Christian J.	Tension - torsion fatigue tests on the proton exchange membrane Nafion 115 (Perfluorosulfonic acid)	360-369
Campilho, Raul / Moreira, Filipe	Use of the XFEM for the design of adhesively-bonded T-joints	435-449
Gonzáles, Giancarlo / González, Julián / Castro, Jaime / Freire, José	Using DIC techniques to measure strain ranges inside the cyclic plastic zone ahead of a fatigue crack tip	74-81
González, Julián / de Castro, Jaime / Gonzáles, Giancarlo / Meggiolaro, Marco / Freire, José	Verification of the ΔKeff hypothesis along the fatigue crack path in thin and thick Al specimens	26-35
Saadallah, Younès / Derfouf, Semcheddine / Guerira, Belhi	A viscoelastic-viscoplastic model for a thermoplastic and sensitivity of its rheological parameters to the strain-rate	666-675

Informations
sur cette fiche
IssueID
37985
Publié(e) le:
24.10.2020
Modifié(e) le:
24.10.2020

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Frattura ed Integrità Strutturale - v. 13, n. 49 (juin 2019)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Frattura ed Integrità Strutturale - v. 13, n. 49 (juin 2019)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.