Frattura ed Integrità Strutturale - v. 14, n. 53 (June 2020)

Published:	June 2020

Articles in this Issue

Author(s)	Title	Page(s)
Monetto, Ilaria / Massabó, Roberta	An analytical beam model for the evaluation of crack tip root rotations and displacements in orthotropic specimens	372-393
Kostina, Anastasiya / Zelnin, Maxim / Plekhov, Oleg / Panteleev, Ivan / Levin, Lev / Semin, Michail	An Applicability of Vyalov’s equations to ice wall strength estimation	394-405
Chatzigeorgiou, Antonios / Theotokoglou, Efstathios / Tsamasphyros, George I.	Code development for the computational analysis of crack propagation in structures	306-324
Abdelmadjid, Moulgada / El Sallah, Zagane Mohammed / Abderahmane, Sahli / Djafar, Ait Kaci / Rachid, Zahi	Comparative study of the repair of cracked plates with two different composite patches	187-201
Reis, Paulo N. B. / Amaro, Ana / Loureiro, Altino	Comparison of mechanical performance between friction-stir spot welded and adhesive bonded joints	124-133
Li, Zheng / Guo, Deping / Berto, Filippo	A coupled elastoplastic damage model for brittle rocks: elastoplastic damage model for brittle rocks	446-456
Kaddour, Sadek / Aour, Benaoumeur / Salah Bennouna, Mohammed / Talha, Abderrahim / Bouiadjra, Belabbes Bachir / Bouanani, Morad Fari	The Effect of corrosion on the quality repair of the aluminum alloy A 5083 H11 by bonded composites	51-65
Reda, Ramy Mostafa / Omar, Zeinab / Sallam, Hossam / Ahmad, Seleem S. E.	Effect of different parameters controlling the flexural behavior of RC beams strengthened with NSM using nonlinear finite element analysis	106-123
Navarro Pintado, Carlos / Vázquez, Jesús / Domínguez, Jaime / Periñán, Antonio / Herrera García, Marta / Lasagni, Fernando / Bernarding, Simon / Slawik, Sebastian / Mücklich, Frank / Boby, Francisco / Hackel, Lloyd	Effect of surface treatment on the fatigue strength of additive manufactured Ti6Al4V alloy	337-344
Ameri, Mahmoud / Mohammadi, Reza / Mousavinezhad, Milad / Ameri, Amirhossein / Shaker, Hamid / Fasihpour, Arash	Evaluating Properties of Asphalt Mixtures Containing polymers of Styrene Butadiene Rubber (SBR) and recycled Polyethylene Terephthalate (rPET) against Failures Caused by Rutting, Moisture and Fatigue	177-186
Kaddouri, Afaf / Serier, Boualem / Kaddouri, Khacem / Belhouari, Mohamed	Experimental Analysis of the Physical Degradation of Polymers – The Case of Polymethyl Methacrylate	66-80
Zhang, Jianwei / Berto, Filippo	Experimental and analytical investigation on the coupled elastoplastic damage model of coal-rock: The investigation on damage model of coal-rock	434-445
Rezaei, Sajad / Damadi, Seyed Mohsen / Edrisi, Ali / Fakhri, Mansour / Khordehbinan, Mohammad Worya	Fatigue Analysis of Bitumen Modified with Composite of Nano-SiO2 and Styrene Butadiene Styrene Polymer	202-209
Liu, Jingna / Ma, Wenpeng	Fatigue Life Simulation and Analysis of Aluminum Alloy Sheet Self-piercing Riveting	141-151
Farida, Bouafia / Hadid, Lamia / Boualem, Serier / Sikandar, Sardar	Finite element analysis of the interface defect in ceramic-metal assemblies: Alumina-Silver	1-12
Namdar, Abdoullah	Forecasting bearing capacity of the mixed soil using artificial neural networking	285-294
Desai, Abilash / Sharanaprabhu, C. M. / Kudari, S. K.	Glass/epoxy fiber orientation effects on translaminar fracture toughness under Mixed mode(I/II) load using FPB specimen	426-433
Gryguc, Andrew / Shaha, Sugrib Kumar / Behravesh, Seyed Behzad / Jahed, Hamid / Wells, Mary / Williams, Bruce	Improvement of Fatigue Properties of AZ31B Extruded Magnesium Alloy through Forging	152-165
Strungar, Elena / Wildemann, Valery	Inelastic deformation and destruction of fiber-laminated polymer composites in stress concentration zones	406-416
Rizov, Victor / Altenbach, Holm	Longitudinal fracture analysis of inhomogeneous beams with continuously varying sizes of the cross-section along the beam length	38-50
Wang, Zhiqiang / Huang, Xiaoguang	Low cycle fatigue damage model and sensitivity analysis of fatigue crack initiation by finite element approach	81-91
Harbaoui, Rym / Daghfas, Olfa / Znaidi, Amna / Tuninetti, Victor	Mechanical behavior of materials with a compact hexagonal structure obtained by an advanced identification strategy of HCP material, AZ31B-H24	295-305
Saadallah, Younès	Modeling of mechanical behavior of cork in compression	417-425
Wang, Dongye / Dong, Yuli / Zhang, Dashan / Wang, Weihua / Lu, Xin	Monitoring and analysis of reinforced concrete plate-column structure under room temperature and fire based on acoustic emission	236-251
Lu, Yao	A new approach of CMT seam welding deformation forecasting based on GA-BPNN	325-336
Fathi, Pourya / Oskouei, Alireza Naddaf / Vahedi, Khodadad / Petrudi, Amin Moslemi	Numerical and Experimental Analysis of Stacking Sequences Effects in Composite Mechanical Joints under Impact Loadings	457-473
Akbari, Jalal / Salami, Omid / Isari, Mohsen	Numerical Investigation of the Seismic Behavior of Unanchored Steel Tanks with an emphasis on the Uplift Phenomenon	92-105
Nurullaev, E. / Lyubimova, N. Y. / Gertsen, T. A.	Physical Parameters of Polymer Composite Materials Created on the Basis of Low and High Molecular Weight Rubbers	134-140
Zakharov, Alexander / Shlyannikov, Valery / Tartygasheva, Anastasia	Plastic stress intensity factor behavior at small and large scale yielding	223-235
Kirin, Snežana / Jeremić, Lazar / Sedmak, Aleksandar / Martić, Igor / Sedmak, Simon / Vučetić, Ivana / Golubovic, Tamara	Risk based analysis of RHPP penstock structural integrity	345-352
Oliveira, Mateus / Teles, Daniel / Amorim, David	Shear behaviour of reinforced concrete beams under impact loads by the lumped damage framework	13-25
Yarullin, Rustam / Shlyannikov, V. N. / Ishtyriakov, I. S. / Yakovlev, M. M.	Stress intensity factors for mixed-mode crack growth in imitation models under biaxial loading	210-222
Fawzy, Hesham / Mustafa, Suzan / El-Badie, Ahmed Abd	Thermal Effect on Bond Strength of Rubberized Concrete Filled Steel Tubular Sections	353-371
Ferro, Paolo / Berto, Filippo / Romanin, Luca	Understanding powder bed fusion additive manufacturing phenomena via numerical simulation	252-284
Pankaj, Jaiswal / Kumar, Rahul Iyer / De Waele, Wim	Unified methodology for characterisation of global fatigue damage evolution in adhesively bonded joints	26-37
Parodo, Gianluca / Giuliano, Gillo / Sorrentino, Luca	Uniformity of thickness of metal sheets by patchwork blanks: potential of adhesive bonding	166-176

About this
data sheet
IssueID
37981
Published on:
23/10/2020
Last updated on:
23/10/2020

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Frattura ed Integrità Strutturale - v. 14, n. 53 (June 2020)

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Frattura ed Integrità Strutturale - v. 14, n. 53 (June 2020)

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.